Scribd
Upload
14 views

11.0example For Flash Instruction

The document provides instructions for installing a driver and flashing firmware on a CUBOT King Kong phone using an MTK flash tool. It details downloading and installing the driver, opening the flash tool, selecting files, powering off the phone, connecting it to the computer, and starting the flash process.

Uploaded by

carviddsia
Copyright
© © All Rights Reserved
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
14 views

11.0example For Flash Instruction

The document provides instructions for installing a driver and flashing firmware on a CUBOT King Kong phone using an MTK flash tool. It details downloading and installing the driver, opening the flash tool, selecting files, powering off the phone, connecting it to the computer, and starting the flash process.

Uploaded by

carviddsia
Copyright
© © All Rights Reserved
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 5

Let’s take CUBOT King Kong as an example.

For windows system, please download the driver first. Unzip the file and

then install it into your computer.

Pls. open the folder, double click to install the driver.

After the driver has been installed, please restart the computer and

open the flash tool, unzip it and then open the file as below.
Open the tool:

Firstly pls. select the first file in the tool

SP_Flash_Tool_v5.1804_Win

Then you need to find the “MTK_AllInOne_DA” file and insert it.
Insert the second file, find “MT6580_Android_scatter” file in the unzip

ROM folder and insert it.

Select Firmware Upgrade:


Click Download

Till now, the tool has been set completely.

Please power off the phone when it is above 20% power, then connect

with computer.
Start to flash the phone.

The flash progress will be done after the yellow bar up to 100% and the

Download OK frame show up.

You might also like