Certified Power Supplies ZSP100
Power Supplies for Fire Protection and Automation Systems
for Fire Protection Systems
The ZSP100 power supplies are a source of
uninterruptible 24 V voltage to the devices of:
▪ fire detection and fire alarm systems according to the EN 54-4
+ AC + A1 + A2 standard
▪ heat and smoke control systems according to the EN 12101-
10 + AC standard
▪ fire protection systems according to Ordinance of the Polish
Minister of the Internal Affairs and Administration of 20 June
2007 (Journal of Laws No. 143, pos. 1002, as amended of 27
April 2010 Journal od Laws No. 85, pos. 553)
Certificate of constancy of performance CNBOP-PIB No. 1438-CPR-0454
Declaration of performance No. DWU-MX-08
Certificate of Admittance CNBOP-PIB No. 2582/2016
The power supplies meet the requirements of the
directives and regulations LVD, EMC, CPR and RoHS 3
16
MAIN FEATURES
▪ high efficiency under load and low power consumption for ▪ immunity against short circuit of battery input
own needs ▪ immunity to reverse battery connection
▪ two or five outputs, protected separately with fuses ▪ two relay indication outputs
▪ possibility to connect a module with additional outputs ▪ external alarm input
▪ bulk charging with current limitation suitable for battery ▪ LED indication on the power supply cabinet
capacity
▪ internal, diagnostic LED indication
▪ temperature compensation of floating operation voltage and
▪ possibility to connect a tamper switch
bulk charging
▪ immunity to difficult working conditions
▪ LVDD
▪ battery circuit resistance measurement
EQUIPMENT
▪ lockable metal wall box with a battery bank ▪ remote indication: mains fault and general fault
compartment (NO and NC relay contacts available)
▪ LED indication of the operation of the power ▪ fuse-protected output and battery circuits
supply: mains and fault ▪ internal LVDD
▪ temperature probe connected permanently ▪ two-state external alarm input
▪ openings for glands on the side and in the
upper part of the cabinet for self-opening
BASIC PARAMETERS
Common Parameters
Nominal mains voltage 110 / 230 V +10% -15%
Nominal output voltage (in the temperature of 25C) 27.1 V
Output voltage range 21.0…28.8 V *1)
Number of cooperating batteries 2 x 12 V
Quiescent current consumption from a battery 12 / 17 / 25 mA *2)
Nominal efficiency at battery charged 89%
Max. resistance of the battery circuit 100 / 150 / 250 mΩ *2)
Number of outputs protected with separate fuses 2 or 5 *2)
Working temperature -5…+55°C
Protection degree according to EN 60529 + A1 IP 42
Functional / Environmental class of EN 12101-10 + AC A/2
Protection class of EN 60950-1 + A11 + A1 + A12 + A2 I
*1)
The range includes a voltage between the discharged battery voltage (at the end of the battery operation
cycle) and the bulk charging voltage.
*2)
Depending on the type of power supply and the size of the battery used
Individual parameters
Technical Data Sheet: K137 ZSP101_20.04.2020_EN
Last update: 20.04.2020
Manufacturer reserve the right to make changes without notice
Certificates ISO 9001 and 14001 Document No. 0658.93.02-02.1 Page 1/2
Power Supplies for Fire Protection and Automation Systems Certified Power Supplies ZSP100
for Fire Protection Systems
Output current Battery Cabinet
Index
Imax b Imax a capacity type
ZSP100-1.5A-07 1.1 A 7…9 Ah 7 Remarks:
1.5 A
ZSP100-1.5A-18 0.6 A 7…20 Ah 18 Descriptions acc. to EN 54-4:
ZSP100-2.5A-07 2.1 A 7…9 Ah 7 - Imax a: maximum continuous current
2.5 A
ZSP100-2.5A-18 1.6 A 7…20 Ah 18
- Imax b: maximum current when
ZSP100-4.0A-07 3.6 A 7…9 Ah 7 battery charging is not required
ZSP100-4.0A-18 4.0 A 3.1 A 7…20 Ah 18
ZSP100-4.0A-40 2.0 A 17…45 Ah 40
ZSP100-5.5A-07 5.1 A 7…9 Ah 7
ZSP100 power supplies require a
ZSP100-5.5A-18 5.5 A 4.6 A 7…20 Ah 18 separate battery order.
ZSP100-5.5A-40 3.5 A 17…45 Ah 40
ZSP100-7.5A-18 6.6 A 7…20 Ah 18
ZSP100-7.5A-40 7.5 A 5.6 A 17…45 Ah 40
ZSP100-7.5A-75 4.3 A 17…75 Ah 75
ZSP100-10A-18 9.1 A 7…20 Ah 18
ZSP100-10A-40 10 A 8.1 A 17…45 Ah 40
ZSP100-10A-75 6.8 A 17…75 Ah 75
ZSP100-12A-18 11.1 A 7…20 Ah 18
ZSP100-12A-40 12 A 10.1 A 17…45 Ah 40
ZSP100-12A-75 8.8 A 17…75 Ah 75
Cabinet type 7 18 40 75
Dimensions
340 × 250 × 80 mm 395 × 356 × 96 mm 455 × 356 × 187 mm 555 × 406 × 187 mm
(W × H × D)
Approximate weight
3.3 kg 4.9 kg 7.5 kg 11 kg
without batteries
Approximate weight
8.5 kg 17 kg 37 kg 58 kg
with batteries
SUGGESTED ADDITIONAL ACCESSORIES
▪ Output expansion module ZSP100-OUT6 including six additional, fuse protected
outputs. Each of them has the LED indication of a blown fuse. The module
transmits information on faults to the main power supply.
▪ Set for sensing switch “tamper” A ZSP TM-1 (switch and harness with connector)
Exemplary order
Power supply for fire protection signaling and automation ZSP100-2.5A-18 2 pcs.
Battery 12 V / 18 Ah 4 pcs.
Set A ZSP TM-1 2 pcs.
MANUFACTURER
MERAWEX Sp. z o.o.
Toruńska 8, 44-122 Gliwice, Poland [email protected]
VAT No. PL6310000440 tel. +48 32 23 99 400
www.merawex.com.pl fax +48 32 23 99 409
Technical Data Sheet: K137 ZSP101_20.04.2020_EN
Last update: 20.04.2020
Manufacturer reserve the right to make changes without notice
Certificates ISO 9001 and 14001 Document No. 0658.93.02-02.1 Page 2/2
