QB - Unit 4 - 22MT4201 Processor and Controller
QB - Unit 4 - 22MT4201 Processor and Controller
PART A (2 Mark)
[Book T1/T2/R1]
(Page No. P.)
S.No Questions BTL Marks
{Figure / Table No
F/ T # }
Mention few differences between a microprocessor and a R 2 [T1]
1.
microcontroller. (P-2.40)
2. List the features of an 8051 microcontroller. R 2 [T1]
(P-2.40)
3. What are SFRs? What are register banks of an 8051? R 2 [T1]
(P-2.41)
4. What is PSW in an 8051? How is stack implemented in 8051? R 2 [T1]
(P-2.41)
5. List the various machine cycles of an 8051 controller. R 2 [T1]
(P-5.31)
6. What are the addressing modes available in an 8051 controller? R 2 [T1]
(P-5.32)
7. How can the 8051 instructions be classified? R 2 [T1]
(P-5.32)
8. What is the maximum number of keycodes that can be R 2 [T1]
generated by 8279? What are the programmable display (P-9.111)
features of 8279?
PART B (14 Mark)
S.No Questions BTL Marks [Book T1/T2]
(Page No. P.)
{Figure / Table No
F/ T #}
i. Illustrate the pin configuration of an INTEL 8051 [T1]
9. microcontroller with suitable figure U 14 (P- 2.3 to 2.7 )
ii. Describe the following with neat tabulation {F#2.2 }
a. Signals of 8051 microcontroller, {Table #2.3, 2.4, 2.5 &
b. Alternate functions of port pins, 2.6}
c. Contents of registers after a reset,
d. Vector address and priority