0% found this document useful (0 votes)
63 views6 pages

AtomOD15G EG7015G - EG8015G Outdoor CPE Data Sheet-BaiCE - BG - 1.8.x-01

The AtomOD15G Outdoor High-Gain CPE provides superior LTE performance and routing capabilities. It supports multiple LTE TDD bands and carrier aggregation, has a 1000 Mbps Ethernet interface, and can achieve peak data rates up to 580 Mbps downlink and 30 Mbps uplink.

Uploaded by

Marcílio Maia
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
63 views6 pages

AtomOD15G EG7015G - EG8015G Outdoor CPE Data Sheet-BaiCE - BG - 1.8.x-01

The AtomOD15G Outdoor High-Gain CPE provides superior LTE performance and routing capabilities. It supports multiple LTE TDD bands and carrier aggregation, has a 1000 Mbps Ethernet interface, and can achieve peak data rates up to 580 Mbps downlink and 30 Mbps uplink.

Uploaded by

Marcílio Maia
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

AtomOD15G

Outdoor Customer Premise Equipment Datasheet

HIGHLIGHTS
NOTE: Features can vary based on model or region.

 Supports LTE TDD Bands 38/40/41/42/43/48


 Complies with 3GPP Release 12 CAT15
INTRODUCTION standards
The Baicells AtomOD15G Outdoor High-Gain CPE  1000 Mbps Ethernet interface
provides superior performance and routing  Peak data rate of up to DL 580 Mbps and UL
capabilities to bring broadband data and voice
services to end-users. It operates on standard LTE 30 Mbps
TDD, supports multiple bands, and complies with  Supports MCS
3GPP Release 12 CAT15 standards.  256QAM for DL and 64QAM for UL as the
The AtomOD15 is available in two variants: The highest order modulation formats.
CAT-B CBSD, which requires SAS connectivity and  Built-in LTE directional antenna, 4x4 MIMO
CPI certification, and the EUD, which does not  Power supply with PoE
require SAS connectivity or CPI certification.
 GUI-based local and remote Web
The CPE design incorporates UL 2x2 and DL 4x4 management
MIMO and RX diversity, enabling improved cell  Supports TR-069 network management
coverage and high-speed wireless protocol
communications. It also supports Carrier  Cell lock, SIM lock, and pin lock
Aggregation (CA), which extends bandwidth,  User-friendly LED status indicators
increases data rates, and improves overall  Pole or wall mounted
network performance.  Wi-Fi assisted alignment
The product comes with a standard one-year  CBRS EUD option is available.
warranty; an extended warranty is available.  Transparent bridge mode* (L2 Support)

www.baicells.com | 400-108-0167 | [email protected] | BaiCE_BG_1.8.x | Document Version: 01


AtomOD15G
Outdoor Customer Premise Equipment Datasheet

TECHNOLOGY
LTE Standard 3GPP Release12, CAT15

LTE Mode TDD


Channel Bandwidth SC: 5/10/15/20 MHz
CA: 80 MHz as maximum aggravated bandwidth

Frequency Bands B38 (2570 MHz-2620 MHz), B40 (2300 MHz- 2400 MHz)
B41 (2496 MHz- 2690 MHz), B42 (3400 MHz- 3600 MHz)
B43 (3600 MHz- 3800 MHz), B48 (3550 MHz- 3700 MHz)
Multiplexing DL 4x4 MIMO, UL 2x2MIMO*

Security Firewall: IP/MAC/URL filter; ACL rule

INTERFACE
Ethernet Interfaced 1 RJ-45 port 10/100/1000 auto-sensing, auto-MDX, PoE

Power Supply 24VDC Passive PoE Injector

Protocols Used IPv4/IPV6, UDP, TCP, IP, ICMP, SNMPv2c, SNMPv3c, HTTPS, SSH, TELNET, TR069,
CBSD

Network Management Web GUI, ACS, OMC, SNMP


VLAN 802.1Q

PERFORMANCE
Peak Rate 4x20MHz (CA) DL (2x2 MIMO, UL (64QAM, 2x20MHz
256QAM) only)

TDD UL/DL Config. 1 420 Mbps 60 Mbps

TDD UL/DL Config. 2 580 Mbps 30 Mbps

2x20MHz (CA) DL (4x4 MIMO, 64QAM) UL (64QAM)

TDD UL/DL Config. 1 320 Mbps 60 Mbps

TDD UL/DL Config. 2 440 Mbps 30 Mbps


Modulation DL: QPSK, 16QAM, 64QAM, 256QAM
UL: QPSK, 16QAM, 64QAM

Carrier Aggregation DL 2CA/3CA/4CA (2x2 MIMO), DL 2CA (4x4MIMO)

www.baicells.com | 400-108-0167 | [email protected] | BaiCE_BG_1.8.x | Document Version: 01


AtomOD15G
Outdoor Customer Premise Equipment Datasheet

UL: 2CA (SISO)

Receive Sensitivity -96±2 dBm @QPSK, 20MHz, 25°C, -102±2 dBm @ 4RX Diversity

MODULATION LEVELS (ADAPTIVE)


DL MCS DL Modulation CQI Index Theoretical Data Rate

0-4 QPSK 1-3 10Mbps - 70Mbps


5 - 10 16QAM 4-6 100Mbps - 190Mbps

11 - 19 64QAM 7 - 11 200Mbps - 350Mbps

20 - 27 256QAM 12 - 15 400Mbps - 580Mbps

UL MCS UL Modulation Theoretical Data Rate


0 - 10 QPSK 0.5Mbps - 7Mbps

11 - 20 16QAM 7Mbps - 17Mbps


21 - 28 64QAM 17Mbps - 30Mbps

FEATURES
Network Mode NAT or Bridge

SIM PIN management, SIM lock


Network Connection Auto or manual

LTE Scan Mode Full band scan or frequency lock

VPN L2TP L2/L3, GRE L2/L3


NAT Port forwarding, port trigger, DMZ, ALG

Diagnostics TCP dump, ping, traceroute

Statistics LTE status; connection/system up time; device status; DHCP client list; Wi-Fi
station list; firewall status
Maintenance Date and time setting; reboot; restore factory settings; restore or back up
configuration file; firmware upgrade locally or OTA

LINK BUDGET
Antenna Type Internal directional, 2T4R
Antenna Gain M11: 18dBi

www.baicells.com | 400-108-0167 | [email protected] | BaiCE_BG_1.8.x | Document Version: 01


AtomOD15G
Outdoor Customer Premise Equipment Datasheet

M11-EUD: 18dBi
M19: 14dBi

Max Transmit Power M11: 26dBm (combined, to regional EIRP limit)


M11-EUD: 5dBm (combined, to regional EIRP limit)
M19: 26dBm (combined, to regional EIRP limit)

Maximum EIRP M11: 44dBm


M11-EUD: 23dBm
M19: 40dBm

PHYSICAL
IP Protection Rating IP66
LED Indicators PWR, LTE, LTE Signal
USIM 1.8V/3V 2FF

Restore Button Press for 10 seconds to restore the UE to its factory settings
Temperature  Operating Temperature: -40°F to 131°F / -40°C to 55°C
 Storage Temperature: -40°F to 158°F / -40°C to 70°C

Humidity 5%~95%
Power Consumption <10 W
Power Supply With PoE Adaptor:
INPUT 100-240VAC
OUTPUT 24VDC 0.5A
Weight About 7.3lbs / 3.47kg

Dimensions 14.5 x 14.5 x 2.9 inches / 368 x 368 x 74 millimeters

WI-FI ALIGNMENT SPECIFICATIONS


Standard IEEE 802.11b/g/n

Channel Bandwidth 20/40 MHz

Frequency 2.4 GHz


MIMO 1x1
Peak Rate 802.11b: 11 Mbps

www.baicells.com | 400-108-0167 | [email protected] | BaiCE_BG_1.8.x | Document Version: 01


AtomOD15G
Outdoor Customer Premise Equipment Datasheet

802.11g: 54 Mbps
802.11n: 150 Mbps

Modulation DSSS/CCK, OFDM

Receive Sensitivity -64 dBm @ 65 Mbps, typical for 802.11n


-65 dBm @ 54 Mbps, typical for 802.11g
-76 dBm @ 11 Mbps, typical for 802.11b

Max Output Power 10 ± 3 dBm

Antenna Type Internal omni, 1T1R


Antenna Gain <1 dBi

GLOBAL PART NUMBERS


EG8015G-M11 Atom Outdoor CAT15, 2T4R, 3.5 GHz, 18dBi, B42/43/48 CPE, IP67
 FCC certification: 2AG32EG8015GM11 (3550-3700MHz)
 IC certification: 20982-EG8015GM11 (3450-3700MHz)

EG8015G-M19 Atom Outdoor CAT15, 2T4R, 2.6 GHz, 14dBi, B38/40/41 CPE, IP67
 FCC certification: 2AG32EG8015GM19 (2490-2690 MHz)
 IC certification: 20982-EG8015GM11 (2570-2620MHz)

EG7015G-M11 Atom Outdoor CAT15, 2T4R, 3.5GHz, 18dBi, B42/43/48, CPE, IP67
FCC certification: TBD
NOTE: Customized versions may be requested. Bands can be customized (B1/3/7/8/20/38/40/41)

EG8015G-M11-EUD Atom Outdoor CAT15, 2T4R, 3.5 GHz, 18dBi, B42/43/48 CPE, IP67
FCC certification: 2AG32EG8015GM11EUD (3550-3700MHz)

ANTENNA PATTERN

www.baicells.com | 400-108-0167 | [email protected] | BaiCE_BG_1.8.x | Document Version: 01


AtomOD15G
Outdoor Customer Premise Equipment Datasheet

EG8015G-M11
EG8015G-M11-EUD
EG7015G-M11

H-Pattern V-Pattern

EG8015G-M19

H-Pattern V-Pattern

www.baicells.com | 400-108-0167 | [email protected] | BaiCE_BG_1.8.x | Document Version: 01

You might also like