GOVERNMENT OF MAHARASHTRA

PUBLIC WORKS CIRCLE AURANAGABAD

PUBLIC WORKS DIVISION AURANAGABAD

ESTIMATE

FOR THE WORK OF

CONSTRUCTION OF VYAMSHALA AT
FATIYABAD
TQ.GANGAPUR, DIST. CH.
SAMBHAJINAGAR

Sub Divisional Engineer

P. W. Sub Division
Gangapur

9420606228.00
 NAME OF WORK :- CONSTRUCTION OF VYAMSHALA AT FATIYABAD
TQ.GANGAPUR, DIST. CH. SAMBHAJINAGAR
Schme UNDER - 2515 - 1238 PROGRAMME 2023 - 24

Section Engineer
P. W. Sub Division
Gangapur

Sub Divisional Engineer

P. W. Sub Division
Gangapur

Executive Engineer
P. W. Division
Aurangabad

Village FATIYABAD

Material Lead Location Lead Charges

Asphalt from Mumbai 0 Mumbai

Cement / steel 7 Local

Metal quarry 10.00 kasabkheda

Sand quarry 15 Shivna

Bricks quarry 10 kasabkheda

Murum 5.00 local

 Face Sheet

Sanctioned Estimete No. :-

Name of Division P. W. Division

Aurangabad
Fund Head :-

Major Head :-

Minor Head :-

Service Head :-

Departmental Head :-

Estimate framed in the office of ----------------------------------------

Sub Divisional Engineer P. W. Sub Division Gangapur
for the probable expenditure that will be incurred in the work of

NAME OF WORK :- CONSTRUCTION OF VYAMSHALA AT FATIYABAD

TQ.GANGAPUR, DIST. CH. SAMBHAJINAGAR

Rs. 999449.00

Administratively Approved No. Date

Technically Sanctioned No. Date

Estimate Prepared By Sectional Engineer

Estimate Checked By Sub Divisional Engineer

 GENERAL DESCRIPTION

NAME OF WORK :- CONSTRUCTION OF VYAMSHALA AT FATIYABAD

TQ.GANGAPUR, DIST. CH. SAMBHAJINAGAR
Schme UNDER - 2515 - 1238 PROGRAMME 2023 - 24

At FATIYABAD Village VYAMSHALA The work is demanded by Local People

& Hon`ble Shri Prashantji Bamb Saheb M.L.A. Gangapur - Khultabad Constituency.
The Work is Propsed under - 2515 - 1238 Progeamme 2023 - 24 & Administrative Approved by Govt. of
Maharshtra Vide G.R. No. Vikas - 2023/P.K.473(18) / Yojna- 6 Dated 14 August 2023

Hence Estimate is prepared by Assistant Engineer Gr.I , P.W. Sub Division , Gangapur & Submitted
for Approval. The Size of Samajik Sabhgrha is consider in this Estimate is ----------------- m

Hence Estimate is framed & following Provisions are made

Excvation for foundation in soil, murum etc
Prov. Soling using 80 mm metal
Prov. & casting in situ CC M- 10 for foundation & bedding
Prov. & Casting in situ CC M - 20 for RCC footing, column, beam, slab, chajja etc.
Prov. & fixing in position TMT steel bar reinforcement for RCC work
Prov. Second class BB Masonry for Plinth , Superstructure etc.
Prov. & fixing of Aluminium Window
Prov. & fixing of Solid PVC Door
Prov. & fixing of Steel grill Work
Filling in plinth with contractors materials
Prov. Internal & External plastering
Prov. & laying Polished kothas stone flooring
Prov. & applying internal & external colouring
Prov. & fixing Information Board
Taking VQC test
Royalty charges for Sand, Metal. Murum etc.
All necessary items are taken

The detailed Estimate is prepared based on current State Shedule Rate of P.W. Deptt.
Year 2022-23, Necessary lead charges, Royalty charges are added.

The cost worked 999449.00

out to Rs.

Section Engineer Sub Divisional Engineer

P. W. Sub Division P. W. Sub Division
Gangapur Gangapur
 Certificate

This is to Certify that Proposed work,

CONSTRUCTION OF VYAMSHALA AT FATIYABAD
TQ.GANGAPUR, DIST. CH. SAMBHAJINAGAR
is neither sanctioned under any scheme nor in proposed work
Or not in progress, this work is not part of any other work hence
it is original / new work. This estimate is prepared as per
PWD norms & specification, PWD RED Book Code, hence certified."

Section Engineer Sub Divisional Engineer

P. W. Sub Division P. W. Sub Division
Gangapur Gangapur
NAME OF WORK :- CONSTRUCTION OF VYAMSHALA AT FATIYABAD
TQ.GANGAPUR, DIST. CH. SAMBHAJINAGAR
Schme UNDER - 2515 - 1238 PROGRAMME 2023 - 24
RECAPITULATION SHEET

1) Cost of Building work Rs. 826254.00

Add. Royalty Building Work 10518.00

Add. Testing Charges Building work 9820.00

A Total Amount Rs. Rs. 846592.00

Add. 18% GST on A 148726.00

Add.0.5% Labour Insurance on a 4131.00

Add.0% Centage Charges 0.00

B Total Amount Rs. 999449.00

Say Total Amount Rs. 999449.00

Section Engineer Sub Divisional Engineer

P. W. Sub Division P. W. Sub Division
Gangapur Aurangabad
NAME OF WORK :-
CONSTRUCTION OF VYAMSHALA AT FATIYABAD
TQ.GANGAPUR, DIST. CH. SAMBHAJINAGAR
ABSTRACT

I.NO. ITEM OF WORK QTY RATE UNIT AMOUNT

1 Excavation for foundation in earth, soil of all types, sand, 24.51 Cum 207.00 5074.00
gravel and soft murum, including removing the
excavated material up to a distance of 50 m. beyond
the building area and stacking and spreading as
directed, dewatering, preparing the bed for the
foundation and necessary back filling, ramming,
watering including shoring and strutting etc. complete.
(Lift upto 1.5 m.) By Mechanical Means....
SSR 2022-23 - I.No.21.02 Pg No. 153 0.00

2 Providing soling using 80 mm size trap metal in 15 cm. 3.95 Cum 1836.54 7254.00
layer including filling voids with Crushed sand / grit,
ramming, watering etc. complete
SSR 2022-23 - I.No.21.40 Pg No. 157 0.00
3 Providing and laying Cast in situ/Ready Mix cement 7.50 Cum 6380.03 47850.00
concrete in M-10 of trap/ granite/ quartzite/
gneiss metal for foundation and bedding including
bailing out water, Steel centering, formwork,
laying/pumping, compacting, roughening them if special
finish is to be provided, finishing if required and
curing complete, with fully automatic micro processor
based PLC with SCADA enabled reversible Drum Type
mixer/concrete Batch mix plant (Pan mixer) etc.
complete. With fine aggregate (Crushed sand VSI
Grade)

SSR 2022-23 - I.No. 24.01 Pg No. 175

4 Providing and laying in situ /Ready Mix cement 7.34 Cum 7639.78 56076.00
concrete M-20 of trap / granite /quartzite/ gneiss
metal for R.C.C. work in foundations like raft, strip
foundations, grillage and footings of R.C.C. columns
and steel stanchions etc. including bailing out water,
Steel centering formwork, laying/pumping cover
blocks, compaction and curing roughening the surface
if special finish is to be provided (Excluding
reinforcement and structural steel) etc. complete, with
fully automatic micro processor based PLC with SCADA
enabled reversible Drum Type mixer/ concrete Batch
mix plant (Pan mixer) etc. complete. With fine
aggregate (Crushed sand VSI Grade)

SSR 2022-23 - I.No.25.11 Pg No. 178 0.00

Page 7
I.NO. ITEM OF WORK QTY RATE UNIT AMOUNT
5 Providing and laying Cast in situ/Ready Mix cement 0.47 Cum 14318.78 6730.00
concrete M-20 of trap /granite /quartzite/ gneiss metal
for R.C.C. columns as per detailed designs and drawing
or as directed including steel centering, formwork, cover
blocks, laying/pumping, compaction finishing the formed
surfaces with cement mortar 1:3 of sufficient minimum
thickness to give a smooth and even surface or
roughening if special finish is to be provided and curing
etc. complete.(Excluding reinforcement and structural
steel).with fully automatic micro processor based PLC
with SCADA enabled reversible Drum Type mixer/
concrete Batch mix plant (Pan mixer) etc. complete. With
fine aggregate (Crushed sand VSI Grade)
SSR 2022-23 - I.No.25.31 Pg No. 179 0.00
6 Providing and laying Cast in situ/Ready Mix cement 5.21 Cum 12804.78 66713.00
concrete M-20 of trap / granite/quartzite/ gneiss
metal for R.C.C. beams and lintels as per detailed
designs and drawings or as directed including
steel centering, formwork, cover blocks,
laying/pumping, compactionand roughening the
surface if special finish is to be provided and
curing etc. complete. (Excluding reinforcement and
structural steel). with fully automatic micro
processor based PLC with SCADA enabled reversible
Drum Type mixer/ concrete Batch mix plant (Pan mixer)
etc. complete. With fine aggregate (Crushed sand VSI
Grade) (RA NO. : 6)

SSR 2022-23 - I.No.25.50 Pg No. 181 0.00

7 Providing and laying Cast in situ/Ready Mix cement 7.28 Cum 14467.78 105325.00
concrete M-20 of trap/ granite / quartzite/ gneiss
metal for R.C.C. slabs and landings as per detailed
designs and drawings including steel centering,
formwork, cover blocks, laying/pumping, compaction
finishing the formed surfaces with cement mortar 1:3 of
sufficient minimum thickness to give a smooth and even
surface or roughening if special finish is to be
provided and curing etc. complete,(Excluding
reinforcement and structural steel).with fully automatic
micro processor based PLC with SCADA enabled
reversible Drum Type mixer/ concrete Batch mix plant
(Pan mixer) etc. complete. With fine aggregate (Crushed
sand VSI Grade)

SSR 2022-23 - I.No.25.70 Pg No. 182 0.00

Page 8
I.NO. ITEM OF WORK QTY RATE UNIT AMOUNT
8 Providing and fixing in position TMT - FE - 500 bar 1.795 MT 89897.05 161365.00
reinforcement of various diameters for R.C.C. pile caps,
footings, foundations, slabs, beams columns,
canopies, staircase, newels, chajjas, lintels pardis,
copings, fins, arches etc. as per detailed designs,
drawings and schedules. including cutting, bending,
hooking the bars, binding with wires or tack welding and
supporting as required complete.
SSR 2022-23 - I.No.26.33 Pg No. 188 0.00
9 Providing second class Burnt Brick masonry with 3.14 Cum 8261.72 25942.00
conventional/ I.S. type bricks in cement mortar 1:6 in
foundations and plinth of inner walls/ in plinth external
walls including bailing out water manually , striking joints
on unexposed faces, raking out joints on exposed faces
and watering etc. Complete.
SSR 2022-23 - I.No.27.01Pg No. 197
10 Filling in plinth and floors with contractors 15.78 Cum 851.22 13432.00
material/brought from outside and approved by
Engineer incharge in layers of 15 cm to 20 cm
including watering and compaction etc. complete.

SSR 2022-23 - I.No.21.37 Pg No. 157 0.00

11 Providing second class Burnt Brick masonry with 8.55 Cum 8500.72 72681.00
conventional/ I.S. type bricks in cement mortar 1:6
in superstructure including striking joints, raking out
joints, watering and scaffolding etc. Complete

SSR 2022-23 - I.No.27.05 Pg No. 197 0.00

Page 9
I.NO. ITEM OF WORK QTY RATE UNIT AMOUNT
12 Providing internal cement plaster 12mm thick in 78.56 Sqm 285.81 22453.00
single coat in cement mortar 1:4 without neeru finish
to concrete or brick surfaces, in all positions including
scaffolding and curing etc. complete.

SSR 2022-23 - I.No. 32.04 Pg No. 209 0.00

0.00
13 Providing sand faced plaster externally in cement 82.26 Sqm. 654.68 53854.00
mortar using approved screened sand, in all positions
including base coat of 15 mm thick in cement
mortar 1:4 using waterproofing compound at
1Kilogramper cement bag curing the same for not less
than 2 days and keeping the surface of the base
coat rough to receive the sand faced treatment 6
to 8 mm thick in cement mortar 1:4 finishing the
surface by taking out grains and curing for
fourteen days scaffolding etc.complete.
SSR 2022-23 - I.No. 32.11 Pg No. 209

14 Providing Mirror polishing to Kota Stone including using 41.45 Sqmt. 158.53 6571.00
all necessary stones and equipments cleaning, washing
etc. complete. For Flooring

SSR 2022-23 - I.No. 33.28 Pg No. 216 0.00

15 Providing Mirror polishing to Kota Stone including using 3.43 Sqm 89.35 306.00
all necessary stones and equipments cleaning, washing
etc. complete. For Skirting

SSR 2022-23 - I.No. 33.29 Pg No. 216 0.00

16 Providing and applying white-wash in one coat on old / 122.43 Sqm 8.00 979.00
new plastered or masonry surfaces and asbestos cement
sheets including scaffolding and preparing the surface
by brushing and brooming down etc. complete.

SSR 2022-23 - I.No. 36.02 Pg No. 226

17 Providing and applying plastic emulsion paint of 126.43 Sqm 135.00 17068.00
approved quality, colour and shade to new surface in
three coats including scaffolding, preparing the surface.
(excluding primer coat) etc. complete.

SSR 2022-23 - I.No. 36.14 Pg No. 228 0.00

Page 10
I.NO. ITEM OF WORK QTY RATE UNIT AMOUNT
18 Providing and applying two coats of exterior weather 128.33 Sqm 295.00 37857.00
shield paint of approved manufacture and of
approved colour to the plastered surfaces including
cleaning ,preparing the plaster surface ,applying
primer coat ,scaffolding if necessary, and watering the
surface for two days etc complete. NOTE: For Item
One 2022-23
SSR Number 15 to 18
- I.No. priorPg
35.26 approval
No. 225of Superintending 0.00

19 Providing and fixing in position. (as per I.S.1868 / 12.00 Sqm 5479.00 65748.00
1982) Aluminium sliding window of two tracks with
rectangular pipe having overall dimension 63.50 x
38.10 x 1.02 mm at weight 0.547 Kilogram/One
Running Metre. and window frame bottom track section
61.85 x 31.75 x 1.20 mm at weight 0.695
Kilogram/One Running Metre. Top and side track
section 61.85 x 31.75 x 1.30 mm at weight 0.659
Kilogram/One Running Metre. The shutter should be of
bearing bottom 40 x 18 x 1.25 mm at weight 0.417
Kilogram/One Running Metre. Inter locking section 40 x
18 x 1.10 mm at weight 0.469 Kilogram/One Running
Metre. And handle section 40 x 18 x 1.25 mm at weight
0.417 Kilogram/One Running Metre. and top section 40
x 18 x 1.25 mm at weight 0.417 Kilogram/Running
metre. As per detailed drawings and as directed
by Engineer in charge with all necessary Aluminium
sections fixtures and fastenings such as roller bearing in
nylon casting and self locking catch fitted in vertical
section of shutter including 5 mm thick plain glass with all
required screws and nuts etc, complete. With colour
Anodising with box.

SSR 2022-23 - I.No. 39.37 Pg No.

20 Providing and fixing M40 grade thick vibrated pull cast 5.10 RMT 1066.00 5437.00
or similar type concrete frame with chamfer conforming
to I.S. 65241983 having 6 mm dia. bars 3 Nos. And
stirrups @250 mm c/c and fixing in wall with 6 Nos
of hold fast of 12 mm dia bars 500 mm long
including primer and oil painting etc, complete) frame
size 60 mm x 100 mm .

SSR 2022-23 - I.No. 39.56 Pg No.

Page 11
I.NO. ITEM OF WORK QTY RATE UNIT AMOUNT
21 Providing and Fixing 30 MM thick BOTH SIDE 1.89 SQM 6548.00 12376.00
PRELAMINATED SOLID PANEL PVC DOOR SHUTTER
consisting of frame made out of M.S tubes of 19 guage
thickness and, size 19 x 19 mm for styles and 15 x15
mm for the top and bottom rails, M.S frame shall have a
coat of metel primer of approved make and
manufacture. M.S frame shall be covered with heat
mouled PVC 'C' channel made from 5 mm (+/0.25) thick
prelaminated sheet of density 600 Kilogram/cbm ,of
size 30mm thickness 70mm width out of which 50mm shall
be flat and 20mm shall be tapered in 45? angle on
either side forming stiles ; and 5 mm thick ,95 mm wide
PVC sheet out of which 75 mm shall be falt and 20 mm
shall be tapered in 45 on the inner side to form top and
bottom rail and 115 mm wide PVC sheet out of which 75
mm shall be falt and 20 mm shall be tapered on both
sides to form lock rail.Top,bottom and lock rail shall be
provided either side of the panel. An additional 5 mm
(+/0.25) thick PVC strip of 20 mm width is to be stuck on
the bottom side of the ' c ' channel prelaminated
paneling of 5 mm (+/0.25) thick PVC sheet to be fitted
inside the M.S. frame welded/ sealed to the styles and
rails with 5 mm (+/0.25) x 30 mm PVC sheet beading on
either side and joined together with solvent cement
adhesive etc ,10 mm thickness (5 mm (+/0.25) x 2 nos )
20 mm wide cross PVC sheet as gap insert for the rail
and bottom rail. Door to be fixed to frames with 3 nos
M.S.powder coated but hinges of size 100 mm x
25MM x 2mm using 32 mm long steel screws
drilled
SSR suitable
2022-23 to pass
- I.No. 39.47through
Pg No. both the walls of

22 Providing and fixing mild steel grill gate as per the 12.00 SQM 2100.00 25200.00
detailed drawing including hinges, locking arrangements
and painting in three coats of oil paint of
approved colour and shade etc. complete.(weight 18
Kilogram. to 20 Kilogram. Per Sq.m.)
Spec.One Number: As directed by Engineer- in-charge.

SSR 2022-23 - I.No. 23.09 Pg No. 174

Page 12
I.NO. ITEM OF WORK QTY RATE UNIT AMOUNT
23 Providing and fixing board displaying information, such 1.00 Nos 9963.00 9963.00
as 'Name of work, Tender cost, Name of Contractor,
Work completion and liability period etc', having
rectangular shape of 1.20m x 0.90m size made out 18
gauge (1.25mm) thick mild steel sheet painted with one
coat of Zinc chromate stoving primer and two coats of
enamel paint on front side and grey stove enamel on
back side and border / messages / symbols etc. with
approved colour shade paint complete, on M.S.angle of
size 35 x 35 x 3 mm frame with properly cross braced
M.S. angles of size 35mmx35mmx3mm duly painted
including Two M.S. angle iron posts of size 65 mm x 65
mm x 6 mm, 3.65 m long painted with alternate black
and white bands of 25 cm width including all fixtures
etc.and fixing the boards in 1:4:8 concrete block of size
60 cm x 60 cm x 75 cm including, excavation, refilling,
transportation, and labour etc complete. Spec. No. As
directed by Engineer in Charge

SSR 2022-23 - I.No. 6.36 Pg No. 60 0.00

Total cost of Civil Work 826254.00

24 Royalty Charges for METAL. Rate Inclusive of surcharge
of 2% 0.00
A) Sand ( 211.95+4.23+21.19=237.37) 21.56 Cum 237.37 5118.00
B ) Metal/HM ( 211.95+4.23=216.18) 24.98 Cum 216.18 5400.00
Total Roaylty Charges 10518.00
25 Aggregates - Water Absorption, Compressive strength, 1.00 Test 2600.00 2600.00
Specif Gravity, Compressive Strength, Soundness

SSR 2022-23 -VQC I.No. 2

26 CONCRETE Compressive Strength OF C.C. Cube(Set of 3.00 Test 690.00 2070.00
3 cubes).INo19-VQC ,
SSR 2022-23 -VQC I.No. 19 0.00
27 Bricks water absorption 0.00
SSR 2022-23 -VQC I.No. 13 1.00 Test 2175.00 2175.00
28 Fine Aggregates 0.00
SSR 2022-23 -VQC I.No. 10 1.00 Test 1380.00 1380.00
29 Ceramic/ Vitrified flooring
1.00 Test 1595.00 1595.00
Total Cost of Testing Charges 9820.00
Total Amount Rs 846592.00

Section Engineer Sub Divisional Engineer

P. W. Sub Division P. W. Sub Division
Gangapur Gangapur

Page 13
NAME OF WORK :- CONSTRUCTION OF VYAMSHALA AT FATIYABAD
TQ.GANGAPUR, DIST. CH. SAMBHAJINAGAR
MEASUREMENT

1 Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the
excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as
directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering
including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means....

SSR 2022-23 - I.No.21.02 Pg No. 153

for Column footing 6 2.00 1.90 1.00 22.80
Step 1 1.90 1.80 0.50 1.71
24.51
Cum

2 Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand / grit,
ramming, watering etc. complete
SSR 2022-23 - I.No.21.40 Pg No. 157
Below footing 6 2.00 1.90 0.10 2.28
Step 1 1.90 1.80 0.10 0.34
Below floor 1 5.00 7.89 0.10 3.95
Net qty 6.57

3 Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/
gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork,
laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and
curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum
Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI
Grade)

SSR 2022-23 - I.No. 24.01 Pg No. 175

footing 6 2.00 1.90 0.10 2.28

Step 1 1.90 1.80 0.10 0.34
Below floor 1 5.46 7.89 0.10 4.31
1 3.80 1.50 0.10 0.57
Total qty 7.50
Cum

Page 14
4 Providing and laying in situ /Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal
for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns
and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping
cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding
reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA
enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine
aggregate (Crushed sand VSI Grade)
SSR 2022-23 - I.No.25.11 Pg No. 178
footing 6 1.70 1.60 0.45 7.34
Net qty 7.34
Cum

5 Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap /granite /quartzite/ gneiss
metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering,
formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of
sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be
provided and curing etc. complete.(Excluding reinforcement and structural steel).with fully automatic micro
processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan
mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

SSR 2022-23 - I.No.25.31 Pg No. 179

Column above 6 0.23 0.53 4.90 0.47
foot. Lvl to slab 0.47
Cum

6 Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite/quartzite/
gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including
steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the
surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and
structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum
Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI
Grade) (RA NO. : 6)
SSR 2022-23 - I.No.25.50 Pg No. 181
for GB 1 3 4.00 0.23 0.38 1.05
1 4 3.60 0.23 0.38 1.26
FB 1 3 4.00 0.23 0.45 1.24
1 4 3.60 0.23 0.45 1.49
Cantilever 1 2 1.00 0.23 0.38 0.17
5.21
Cum

7 Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite / quartzite/
gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel
centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement
mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special
finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with
fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch
mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

SSR 2022-23 - I.No.25.70 Pg No. 182

Slab Hall 1 5.46 8.89 0.150 7.28
7.28
Cum

Page 15
8 Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps,
footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings,
fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking
the bars, binding with wires or tack welding and supporting as required complete.

SSR 2022-23 - I.No.26.33 Pg No. 188

Footing 1 7.34 0.075 0.551
Column 1 0.47 0.100 0.047
Beam 1 5.21 0.090 0.469
Slab 1 7.28 0.100 0.728
Net qty 1.795
MT

9 Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in
foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking
joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete.

SSR 2022-23 - I.No.27.01Pg No. 197

Plinth 1 3 4.00 0.23 0.50 1.38
1 1 3.60 0.23 0.50 0.41
Step 1 2.00 1.50 0.15 0.45
1 2.00 1.20 0.15 0.36
1 2.00 0.90 0.15 0.27
1 2.00 0.60 0.15 0.18
1 2.00 0.30 0.15 0.09
3.14
Cum

10 Filling in plinth and floors with contractors material/brought from outside and approved by Engineer
incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete.

SSR 2022-23 - I.No.21.37 Pg No. 157

Plinth 1 5.00 7.89 0.40 15.78
15.78
Cum
11 Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6
in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete

SSR 2022-23 - I.No.27.05 Pg No. 197

above plinth 4 1 3.50 0.23 3.05 9.82
2 1 5.46 0.23 3.05 7.66
Parapet 2 1 5.46 0.23 0.50 1.26
2 1 7.89 0.23 0.50 1.81
Deduction
-1 4 2.00 1.50 -12.00
Window
Net Qty 8.55
Cum

Page 16
12 Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish
to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.

SSR 2022-23 - I.No. 32.04 Pg No. 209

Hall 1 2 4.00 3.35 26.80
2 2 3.60 3.35 48.24
Beam 1 4 3.00 0.23 0.38 1.05
1 3 6.69 0.23 0.38 1.75
Column 1 6 4.00 0.53 12.72
Deduction
-1 4 2.00 1.50 -12.00
Window
78.56
Sqm

13 Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions
including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at
1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base
coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the
surface by taking out grains and curing for fourteen days scaffolding etc.complete.

SSR 2022-23 - I.No. 32.11 Pg No. 209

Hall 2 5.46 4.00 43.68
2 3.60 4.00 28.80
parapet In 1 5.46 0.50 2.73
1 3.60 0.50 1.80
Out 1 5.46 0.50 2.73
1 3.60 0.50 1.80
Column 1 6 4.00 0.53 12.72
Deduction
-1 4 2.00 1.50 -12.00
Window
82.26
Sqm

14 Providing Mirror polishing to Kota Stone including using all necessary stones and equipments cleaning,
washing etc. complete. For Flooring
SSR 2022-23 - I.No. 33.28 Pg No. 216
Hall 1 1 4.00 7.43 29.72
Step 5 5.21 0.30 7.82
5 5.21 0.15 3.91
41.45
Sqm

15 Providing Mirror polishing to Kota Stone including using all necessary stones and equipments cleaning,
washing etc. complete. For Skirting
SSR 2022-23 - I.No. 33.29 Pg No. 216
HALL 2 4.00 0.15 1.20
2 7.43 0.15 2.23
3.43
RMT

Page 17
16 Providing and applying white-wash in one coat on old / new plastered or masonry surfaces and asbestos
cement sheets including scaffolding and preparing the surface by brushing and brooming down etc.
complete.
SSR 2022-23 - I.No. 36.02 Pg No. 226
Ceiling 1 2 4.00 3.60 28.80
Column 1 6 0.53 3.35 10.65
Beam 2 1 4.00 0.30 2.40
1 1 4.00 0.23 0.92
Hall 1 2 4.00 3.35 26.80
1 2 7.89 3.35 52.86
Net qty 122.43
Sqm

17 Providing and applying plastic emulsion paint of approved quality, colour and shade to new surface in three
coats including scaffolding, preparing the surface. (excluding primer coat) etc. complete.
SSR 2022-23 - I.No. 36.14 Pg No. 228
Ceiling 1 2 4.00 3.60 28.80
Column 1 6 0.53 3.35 10.65
Beam 1 1 4.00 0.30 1.20
1 1 4.00 0.23 0.92
Hall 1 2 4.00 4.00 32.00
1 2 7.89 3.35 52.86
Net qty 126.43
Sqm

18 Providing and applying two coats of exterior weather shield paint of approved manufacture and of
approved colour to the plastered surfaces including cleaning ,preparing the plaster surface ,applying
primer coat ,scaffolding if necessary, and watering the surface for two days etc complete. NOTE: For Item
One Number 15
SSR 2022-23 to 18
- I.No. priorPg
35.26 approval
No. 225of Superintending Engineer will be necessary
Room External 2 4.46 4.00 35.68
2 7.89 4.00 63.12
Column 6 0.23 3.50 4.83
parapet In 2 4.46 0.50 4.46
2 7.89 0.50 7.89
Out 2 4.46 0.50 4.46
2 7.89 0.50 7.89
128.33
Sqm

Page 18
19 Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of two tracks with
rectangular pipe having overall dimension 63.50 x 38.10 x 1.02 mm at weight 0.547 Kilogram/One
Running Metre. and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695
Kilogram/One Running Metre. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659
Kilogram/One Running Metre. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417
Kilogram/One Running Metre. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram/One
Running Metre. And handle section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/One Running Metre. and
top section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. As per detailed drawings and
as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as
roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick
plain glass with all required screws and nuts etc, complete. With colour Anodising with box.

SSR 2022-23 - I.No. 39.37 Pg No.

window 4 2.00 1.50 12.00
SQM

20 Providing and fixing M40 grade thick vibrated pull cast or similar type concrete frame with chamfer
conforming to I.S. 65241983 having 6 mm dia. bars 3 Nos. And stirrups @250 mm c/c and fixing in wall
with 6 Nos of hold fast of 12 mm dia bars 500 mm long including primer and oil painting etc,
complete) frame size 60 mm x 100 mm .

SSR 2022-23 - I.No. 39.56 Pg No.

Door frame 2 2.10 1.00 4.20
1 0.90 1.00 0.90
5.10
RMT

21 Providing and Fixing 30 MM thick BOTH SIDE PRELAMINATED SOLID PANEL PVC DOOR SHUTTER consisting
of frame made out of M.S tubes of 19 guage thickness and, size 19 x 19 mm for styles and 15 x15 mm for
the top and bottom rails, M.S frame shall have a coat of metel primer of approved make and
manufacture. M.S frame shall be covered with heat mouled PVC 'C' channel made from 5 mm (+/0.25)
thick prelaminated sheet of density 600 Kilogram/cbm ,of size 30mm thickness 70mm width out of which
50mm shall be flat and 20mm shall be tapered in 45? angle on either side forming stiles ; and 5 mm thick
,95 mm wide PVC sheet out of which 75 mm shall be falt and 20 mm shall be tapered in 45 on the inner side
to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be falt and 20 mm shall
be tapered on both sides to form lock rail.Top,bottom and lock rail shall be provided either side of the
panel. An additional 5 mm (+/0.25) thick PVC strip of 20 mm width is to be stuck on the bottom side of the '
c ' channel prelaminated paneling of 5 mm (+/0.25) thick PVC sheet to be fitted inside the M.S. frame
welded/ sealed to the styles and rails with 5 mm (+/0.25) x 30 mm PVC sheet beading on either side and
joined together with solvent cement adhesive etc ,10 mm thickness (5 mm (+/0.25) x 2 nos ) 20 mm wide
cross PVC sheet as gap insert for the rail and bottom rail. Door to be fixed to frames with 3 nos
M.S.powder coated but hinges of size 100 mm x 25MM x 2mm using 32 mm long steel screws
drilled suitable to pass through both the walls of the M.S tube. Other hardwares

SSR 2022-23 - I.No. 39.47 Pg No.

Door 1 2.10 0.90 1.89
SQM

22 Providing and fixing mild steel grill gate as per the detailed drawing including hinges, locking arrangements
and painting in three coats of oil paint of approved colour and shade etc. complete.(weight 18
Kilogram. to 20 Kilogram. Per Sq.m.)
Spec.One Number: As directed by Engineer- in-charge.

SSR 2022-23 - I.No. 23.09 Pg No. 174

Window 4 2.00 1.50 12.00
SQM

Page 19
23 Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor,
Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18
gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats
of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc.
with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross
braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65
mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all
fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including,
excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge

SSR 2022-23 - I.No. 6.36 Pg No. 60

Board 1.00
Nos

24 Royalty Charges for METAL. Rate Inclusive of surcharge of 2%

qty Factor Sand qty Factor Metal qty

Soling 3.95 0 0 1.00 3.95
M-10 7.50 0.47 3.53 0.70 5.25
M-20 20.30 0.43 8.63 0.00 0.00
BBM 11.69 0.320 3.74 0.00 0.00
HM 15.78 0.000 0.00 1.00 15.78
12 mm plaster 78.56 0.025 1.96 0.00 0.00
Sand faced 82.26 0.033 2.71 0.00 0.00
Flooring 44.88 0.022 0.99 0.00 0.00
21.56 0 24.98 cum

25 Aggregates - Water Absorption, Compressive strength, Specif Gravity, Compressive

Strength, Soundness
SSR 2022-23 -VQC I.No. 2 1.00 Test

26 CONCRETE Compressive Strength OF C.C. Cube(Set of 3 cubes).INo19-VQC ,

SSR 2022-23 -VQC I.No. 19 3.00 Test

27 Bricks water absorption

SSR 2022-23 -VQC I.No. 13 1.00 Test

28 Fine Aggregates
SSR 2022-23 -VQC I.No. 10 1.00 Test

29 Ceramic/ Vitrified flooring 1.00 Test

SSR 2021-23 -VQC I.No.16

Section Engineer Sub Divisional Engineer

P. W. Sub Division P. W. Sub Division
Gangapur Gangapur

Page 20
NAME OF WORK :- CONSTRUCTION OF VYAMSHALA AT FATIYABAD
TQ.GANGAPUR, DIST. CH. SAMBHAJINAGAR

RATE ANALYSIS

2 Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed
sand / grit, ramming, watering etc. complete
SSR 2022-23 - I.No.21.40 Pg No. 157
Basic Rate 1454.00
Add. 4 % for M.C. area Charges 0.00
Add. Extra lead charges 1 330.77 330.77
Add. Cr. Metal 0.15 345.15 51.77
Total Rate Rs. 1836.54 Cum

3 Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/
quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel
centering, formwork, laying/pumping, compacting, roughening them if special finish is to be
provided, finishing if required and curing complete, with fully automatic micro processor
based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer)
etc. complete. With fine aggregate (Crushed sand VSI Grade)

SSR 2022-23 - I.No. 24.01 Pg No. 175

Basic Rate 5830.00
Add. 4 % for M.C. area Charges 0.00
Add. metal lead charges
1 0.7 330.77 231.54
Add. metal lead charges
1 0.24 345.15 82.84
Add. Cr.Sand lead charges
1 0.47 410.55 192.96
Add. Cement lead charge
1 0.22 194.05 42.69
Total Rate Rs. 6380.03 Cum.

Page 21
4 Providing and laying in situ /Ready Mix cement concrete M-20 of trap / granite /quartzite/
gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and
footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel
centering formwork, laying/pumping cover blocks, compaction and curing roughening the
surface if special finish is to be provided (Excluding reinforcement and structural steel) etc.
complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum
Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed
sand VSI Grade)

SSR 2022-23 - I.No.25.11 Pg No. 178

Basic Rate 7104.00
Add. 4 % for M.C. area Charges 0.00
Add. Cr.metal 20 mm
1 0.57 345.15 196.74
Add. Cr.metal 12 mm
1 0.28 345.15 96.64
Add. Cr.Sand lead charges
1 0.425 410.55 174.48
Add. Cement lead charge
1 0.35 194.05 67.92
Total Rate Rs. 7639.78 Cum.

5 Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap /granite /quartzite/
gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel
centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with
cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening
if special finish is to be provided and curing etc. complete.(Excluding reinforcement and structural
steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type
mixer/ concrete
SSR 2022-23 Batch mix plant
- I.No.25.31 Pg No.(Pan
179mixer) etc. complete. With fine aggregate (Crushed sand VSI
Basic Rate 13783.00
Add. 4 % for M.C. area Charges 0.00
Add. Cr.metal 20 mm
1 0.57 345.15 196.74
Add. Cr.metal 12 mm
1 0.28 345.15 96.64
Add. Cr.Sand lead charges
1 0.425 410.55 174.48
Add. Cement lead charge
1 0.35 194.05 67.92
Total Rate Rs. 14318.78 Cum.

Page 22
6 Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap /
granite/quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings
or as directed including steel centering, formwork, cover blocks, laying/pumping,
compactionand roughening the surface if special finish is to be provided and curing etc.
complete. (Excluding reinforcement and structural steel). with fully automatic micro
processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant
(Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) (RA NO. : 6)

SSR 2022-23 - I.No.25.50 Pg No. 181

Basic Rate 12269.00
Add. 4 % for M.C. area Charges 0.00
Add. Cr.metal 20 mm
1 0.57 345.15 196.74
Add. Cr.metal 12 mm
1 0.28 345.15 96.64
Add. Cr.Sand lead charges
1 0.425 410.55 174.48
Add/ Cement lead charges
1 0.35 194.05 67.92
Total Rate Rs. 12804.78 Cum.

7 Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite /
quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings
including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed
surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface
or roughening if special finish is to be provided and curing etc. complete,(Excluding
reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA
enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine
aggregate (Crushed sand VSI Grade)

SSR 2022-23 - I.No.25.70 Pg No. 182

( Basic Rate - 12449.00-117.00for Non Scada )
Basic Rate 13932.00
Add. 4 % for M.C. area Charges 0.00
Add. Cr.metal 20 mm
1 0.57 345.15 196.74
Add. Cr.metal 12 mm
1 0.28 345.15 96.64
Add. Cr.Sand lead charges
1 0.425 410.55 174.48
Add/ Cement lead charges
1 0.350 194.05 67.92
Total Rate Rs. 14467.78 Cum.

8 Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C.
pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas,
lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules.
including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as
required complete.

SSR 2022-23 - I.No.26.33 Pg No. 188

Basic Rate 89703.00
Add. 4 % for M.C. area Charges 0.00
Add. Extra lead charges
1 1 194.05 194.05
Total Rate Rs. 89897.05 MT

Page 23
9 Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement
mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out
water manually , striking joints on unexposed faces, raking out joints on exposed faces and
watering etc. Complete.

SSR 2022-23 - I.No.27.01Pg No. 197

Basic Rate 7755.00
Add. 4 % for M.C. area Charges 0.00
Add. Brick lead charges
1 0.475 757.93 360.02
Add. Sand lead charges
1 0.32 410.55 131.38
Add/ Cement lead charges
1 0.079 194.05 15.33
Total Rate Rs. 8261.72 Cum.

10 Filling in plinth and floors with contractors material/brought from outside and approved by
Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc.
complete.
SSR 2022-23 - I.No.21.37 Pg No. 157
Basic Rate 599.00
Add. 4 % for M.C. area Charges 0.00
Add. Extra lead charges
1 1 252.22 252.22
Total Rate Rs. 851.22 Cum

11 Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement
mortar 1:6 in superstructure including striking joints, raking out joints, watering and
scaffolding etc. Complete

SSR 2022-23 - I.No.27.05 Pg No. 197

Basic Rate 7994.00
Add. 4 % for M.C. area Charges 0.00
Add. Brick lead charges
1 0.475 757.93 360.02
Add. Sand lead charges
1 0.32 410.55 131.38
Add/ Cement lead charges
1 0.079 194.05 15.33
Total Rate Rs. 8500.72 Cum.

12 Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without
neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc.
complete.
SSR 2022-23 - I.No. 32.04 Pg No. 209
Basic Rate 278.00
Add. 4 % for M.C. area Charges 0.00
Add. Extra sand lead charges
1 0.015 410.55 6.16
Add. Extra Cement lead charges
1 0.0085 194.05 1.65
Total Rate Rs. 285.81 Sqm

Page 24
13 Providing sand faced plaster externally in cement mortar using approved screened sand, in all
positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing
compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the
surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in
cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days
scaffolding etc.complete.
SSR 2022-23 - I.No. 32.11 Pg No. 209
Basic Rate 639.00
Add. 4 % for M.C. area Charges 0.00
Add. Extra sand lead charges
1 0.033 410.55 13.55
Add. Extra Cement lead charges
1 0.011 194.05 2.13
Total Rate Rs. 654.68 Sqm

14 Providing Mirror polishing to Kota Stone including using all necessary stones and equipments
cleaning, washing etc. complete. For Flooring

SSR 2022-23 - I.No. 33.28 Pg No. 216

Basic Rate 149.00
Add. 4 % for M.C. area Charges 0.00
Add. Sand lead charges
1 0.02 410.55 8.21
Add/ Cement lead charges
1 0.0068 194.05 1.32
Total Rate Rs. 158.53 Sqm

15 Providing Mirror polishing to Kota Stone including using all necessary stones and equipments
cleaning, washing etc. complete. For Skirting

SSR 2022-23 - I.No. 33.29 Pg No. 216

Basic Rate 79.00
Add. 4 % for M.C. area Charges 0.00
Add. Sand lead charges
1 0.022 410.55 9.03
Add/ Cement lead charges
1 0.0068 194.05 1.32
Total Rate Rs. 89.35 Sqm

Section Engineer Sub Divisional Engineer

P. W. Sub Division P. W. Sub Division
Gangapur Gangapur

Page 25
 NAME OF WORK :- CONSTRUCTION OF VYAMSHALA AT FATIYABAD
TQ.GANGAPUR, DIST. CH. SAMBHAJINAGAR
LEAD CHART
NO. Material KM.No. QUARRY Lead in Lead charge P.L.F. Net lead Unit
Km charges
1 Metal Above 40 mm 0 kasabkheda 10.00 1984.62 6.00 330.77 Cum.

2 Metal Below 40 mm 0 kasabkheda 10.00 1984.62 5.75 345.15 Cum.

3 Murum 0 local 5.00 1513.34 6.00 252.22 Cum.

4 Crush sand 0 kasabkheda 11.00 1984.62 5.75 345.15 Cum

.
5 Sand 0 Shivna 15 2360.66 5.75 410.55 Cum

6 Cement/steel 0 Local 7 1940.53 10.00 194.05 MT

7 Bricks 0 kasabkheda 10.00 2353.37 3.105 757.93 Nos.

Section Engineer Sub Divisional Engineer

P. W. Sub Division P. W. Sub Division
Gangapur Gangapur
 NAME OF WORK :- CONSTRUCTION OF VYAMSHALA AT FATIYABAD
TQ.GANGAPUR, DIST. CH. SAMBHAJINAGAR

QUARRY CHART
Gangapur
Material Lead Location

Asphalt from Mumbai 0 Mumbai

Cement / steel 7 Local

Metal quarry 10.00 kasabkheda

Sand quarry 15 Shivna

Bricks quarry 10 kasabkheda NH

Murum 5.00 local

FATIYABAD

Aurangabad

Certificate
1) Certified that the Quarries of various Material as shown on chart above have been inspected by me and
the material of requisite grade , specification are presently available in sufficient quantities required for
the work. that the quarries of required material are located at minimum distance from work site and No
2) Certified
other qurries are present at a distance laser than the lead shown on quarry chart.
3) Certified that the distance shown on the map are correct minimum and personally verified by me by
travelling on minimum distance path..

Section Engineer Sub Divisional Engineer

P. W. Sub Division P. W. Sub Division
Gangapur Gangapur
NAME OF WORK :- CONSTRUCTION OF VYAMSHALA AT FATIYABAD
TQ.GANGAPUR, DIST. CH. SAMBHAJINAGAR

5.46 M
0.23x0.53 m
C1 C2

5.00 M
4.00

C3 C4
7.89
HALL M
5.46 x 7.89 m

C5 C6

1.00

PLAN ( Not To Scale )

Section Engineer Sub Divisional Engineer

P. W. Sub Division P. W. Sub Division
Gangapur Gangapur
NAME OF WORK :- CONSTRUCTION OF VYAMSHALA AT FATIYABAD
TQ.GANGAPUR, DIST. CH. SAMBHAJINAGAR

M - 20 RCC Slab / 0.13 m th.

0.50
M - 20 RCC column M
( 0.23x0.53 m )

3.50 m

KOTA flooring

Plinth filling
0.5 m

1.00 0.45
M - 10 Beding / 0.10 m th.
PCC = 100.00 Soling 80 mm/ 0.10 m th. 2.00

SECTIONAL ELEVATION

Section Engineer Sub Divisional Engineer

P. W. Sub Division P. W. Sub Division
Gangapur Gangapur
NAME OF WORK :- CONSTRUCTION OF VYAMSHALA AT FATIYABAD
TQ.GANGAPUR, DIST. CH. SAMBHAJINAGAR

SITE PLAN

Section Engineer Sub Divisional Engineer

P. W. Sub Division P. W. Sub Division
Gangapur Gangapur