JAYDIP PARMAR

SQA of Sheet metal, Project Management & CAD/CAM

Permeant Address: - Kodinar- 362720, Gujarat

Current location: - Vadodara, Gujarat
Phone: 7990607552

E- Mail [email protected]

CORE COMPETENCIES

●Project management ● Quality planning ● BIW Manufacturing Processes

● Root cause analysis ● CAD/CAM ● Change Management
● Document controller ● PPAP ● Oversea client management

Professional Summary (Total work experience 5 Years)

• Supplier Quality Engineer with 4.6 years working alongside Maintains strict adherence to extremely high supplier standards
without alienating business partners. Adept at helping manufacturing allies enhance contributions through judicious
applicationof remedial advice and financial encouragement.
• Hardworking and passionate job seeker with strong organizational skills eager to secure entry-level SQA position. Ready to
help team achieve company goals.
• Enthusiastic SQA eager to contribute to team success through hard work, attention to detail and excellent organizational
skills.Clear understanding of quality issues resolving technical and training in 7QC.
• Experienced SQA with over 4.5 years of experience in Tata Motors / MG motors Excellent reputation for resolving problems.
• Contribute to continuous improvement activities.
• Fixture & gauges development of Chassis and BIW Panels as well Assembly components
• Product GDNT reviews and release to Supplier.
Professional Knowledge
• SPC, 7QC tools, 5S, GD & T, POKA YOKE, APQP, MSA, PPAP, NPD
• ISO 9001:2008, IATF 16949,
• 8 D, Understanding and interpretation of engineering drawings.
• Scan master ultrasonic spot strength technique
Skills
• Supplier Quality assurance (Sheet metal) & Suppliers audits.

• Calibration understanding of gauge and fixtures for inspection.

• Commodity-Related QA all sheet metal parts.

• Inspection Plan Design (L-1, L-2, L-3 inspection level 0 and line issue

• Supplier Quality Audits (QAV), Tooling verification and Mass Production Approval of parts.

• Good analytical & Technical Skills & Knowledge of Forging Process / casting / Plastic/ Fasteners / Sheet metal.

• Well practices in Computer proficiency, Presentation skills & Communication skills through Drawing study & GD&T.

• Have technical knowledge about below area: - NPD, Build issue, Fixture modification, Fixture audit and improvement,

CF validation, BIW Body CMM CTQ improvement

 Work History

Project controller (April 2023 – Current)

L&T Technology Services Limited, Vadodara (Gujarat), India

• Coordinating with clients from different parts of world for Project work.
• Quality checks the engineering documents & coordinating with respective engineers for missing data and correction if any.
• Communication with Equipment Suppliers for Documentation like certificates, GA drawings, Datasheets, etc.
• Storing supplier documents in EDMS.
• Dealing with oversea suppliers and clients
• Taking supplier virtual supplier visit for oversea suppliers.
• Maintaining Track Matrix for periodical follow-up of documentation with Suppliers & interdepartmental follow-up to meet deadlines.
• Checking of above documents according to Project requirement, reverting suppliers for changes and ensuring right Documentation
• Ensuring Smooth flow of project documentation.
• Reviewing supplier PPAP.

Supplier Quality Assurance (2021-Apr ~ 2023 -Apr) _Junior Engineer

MG Motor India Private Limited, Vadodara (Gujarat), India

Responsibilities as Site SQE

• Manage action plans with suppliers in case of deviations, in the development phase.
• Execution of PTR, Run at Rate, Quality/Production/Capacity verification activities at suppliers.
• Supporting and developing suppliers in establishing improvement programs, verifying implementation of quality improvement
programs at suppliers
• Own and Lead Supplier 8D’s on all supplier product issues with an urgent and timely manner. Not to exceed more than 14 days from
initiation
• Review & resolve part related issues during new product development issues.
• Closely monitor development activities with suppliers to achieve project milestones.
• Regular suppliers visit for existing ongoing project.
• Correcting PPAP as per requirements
• Ensure latest Engineering Change Implementation at supplier end with resolution of technical &
timeline adherence issues.
Responsibilities as Resident SQE
• Monitor and drive timely closure of Supplier initiated Engineering Changes Requests
• Leading and resolving major downtime related issue at BIW shop related to part quality.
• Take corrective & preventive actions by analyzing the root cause through different problem-solving tools (8D, DMAIC, PDCA)
• Handling Press shop stamping issue which is caused by supplier blank (Coordinating with different stake holders for material
properties verification, Blank storage and handling, Pre-cut blanks related etc.
• Improving consistency of BIW CTQ and critical matching & mounting point through fixture modification and correction.
• Manage internal line rejections from root cause analysis through to closure analyzing trends and driving corrective actions.
• Analyzed issues with supplier contributions to detect defect trends, reporting find- Ings to appropriate personnel (MOM).
• Maintained amiable relationships with suppliers through difficult quality control is- sues, supporting healthy business
interactions.
• Perform on-site supplier visits for root cause analysis and verification of correction actions of supplier quality issues.
• Responsible for analysis of white body 3D geometry reports and take countermeasures to improvement.
body accuracy through improvement in process and parts accuracy.
• Worked within applicable standards, policies, and regulatory guidelines to promotesafe working environment.
 Key Achievements:
➢ Resolving 6 major chronic issue to eliminate major downtime at production.
➢ Finding RC and supporting supplier for PCA for Major stud weld failure in EV vehicle
➢ Resolving long time pending issue in every quarter with DMAIC approach
➢ Achieving 88% accuracy in new model vehicle CMM accuracy by resolving and improving part concern
➢ Supporting out of the box within team and other stakeholders during major concerns related to BIW.
➢ Recognized by different stakeholders (Quality, Product engineering, SCM, Production etc.) Successful execution of the BIW
development for ASTOR Model.
➢ Active participation in new projects model technical reviews of with Tier-1 suppliers.
➢ Execution of PTR, Run at Rate, Quality/Production/Capacity verification activities at suppliers.
➢ Functional representation in various build viz. TA1 & TA2, NS, Saleable & Initial Mass Production Builds, also drive resolution
of supplier quality issues occurring during various builds through CAPA/8D methodology.
➢ Lead process change request from supplier & ensure timely implementation with support from all stake holders through
change management forum.
➢ Presentation of projects status at supplier in meetings with leadership

Vendor Quality Assurance (2018-Oct ~ 2021-Mar) _Diploma Engineer trainee

Tata Motors Limited, Sanand (Gujarat), India

• Incoming inspection and assuring all the incoming sheet metal parts are meeting requirements and giving clearance to use in line
(clearing GIN).
• Daily rejection monitoring of these suppliers’ parts, analysis of this parts problems online / Informing to supplier / getting CAPA
from supplier / Verifying CAPA at supplier end.
• Carrying layout inspection, supervise team members engaged in inspection of BIW incoming parts.
• Attending daily rejection meeting along with SQ, CQ, SCM team to discuss issues and resolving on systematic way.
• Coordinating for CMM, inspection of supplier parts lay out inspection and action follow up.
• Coordinating with manufacturing Quality, for correction in assembly fixture for CMM Not Ok points.
• Weekly issues discussion with senior management for open issues through BITS review.
• Participating in a Cross Functional Team for Major dimensional related concerns at Various shops (Body and Trim & Chassis)
• Quality standard preparation for new developed parts, modified parts, and in case of next customer issues.
• Daily rejection monitoring of these suppliers’ parts, analysis of this parts problems online / Informing to supplier / getting CAPA
from supplier / Verifying CAPA at supplier end.
• Evaluation/developing of skill level and monitor performance of team members & team performance.
• To support teams to implement Kaizen’s, cost saving suggestions and facilitate team’s projects.
• Responsible for safe conduct of production team members and ensure adherence to Safety Standards laid out.

Key Achievements:
- As a Diploma trainee singly handled VQA Sheetmetal commodity.
- Successfully completed new vehicle launch initial part celebration as a DET under DGM and Quality head 2021 (Tiago CNG, Tigor
EV and JTP Edition.
- Overall, 16 team members are under my guidance are capturing major issue at Incoming stage.
- Major aftermarket issue captured and resolved with SQ and AQ - 2020
- As VQA (Vendor quality assurance) max supplier visit done along with SQE for past reported issues
- Suppliers visit along with AQ team for new lunch and MCE project for Tiago and Tigor.
 Education

Aug 2017 – Aug 2018 Post Diploma in Tool Design and CAD/CAM

INDO GERMAN TOOL ROOM – Ahmedabad

Aug 2014 – July 2017 Diploma Mechanical Engineering

Government Polytechnic Porbandar - GTU

April 2013 – May 2014 Secondary School Certificate

Gujarat Secondary and Higher Secondary Education Board

Aug 2023 – Mar-2027(expected) Bachelor of mechanical engineering (currently pursuing)

Neotech technical campus-GTU

Software

• Manufacturing Execution Systems (MES).

• CAD /CAM & Visualization software- NX 10, SOLIDWORKS, CREO, SIEMENS

TEAMCENTER, JT2GO

• ERP Software- SAP® (MM),

• Microsoft Office tool- word, PowerPoint, excel.

• eDMS Software – M-Files®, BOX, IPIX (Tool for creating, editing, and publishing
documents.

• Scan master (Ultrasonic spot testing machine)

• Minitab® Power BI, and Different OEMs specific portal’s

Personal details

• Father's Name - Bhagvanbhai V Parmar

• Date of Birth – 26th Nov 1998
• Material Status – Unmarried

Training • Languages – English, Hindi & Gujarati

• 3D modeling and 2D drafting on Press tool and mold tool design (Solid Works & NX

• MSA, SPC & GD&T from OMNEX

• Advance EXCLE
Declaration

I hereby declare that the above-mentioned information is correct up to my knowledge and I bear to the responsibility for correctness
of the above-mentioned particulars.

PLACE: -
DATE: - JAYDIP PARMAR