TEST RESULTS Form: M69-00364
YTTERBIUM LASER SYSTEM Revision: 1
Model YLS-3000-K Spec: G22-252099
Page: 1 of 13
S/N R19051602
This product is covered by the U.S. Pat. Nos. 5,422,897 and 5,774,484 and any foreign counterparts thereof, and
Patent Pending (U.S. Patent Appl. No. 11/973,437).
The information and the following charts provided below is the result of tests performed in controlled environments
by IPG IRE-Polus. These provided useful, but not warranted, information about the functions and performance of
the product.
Test
Characteristic Symbol Test Conditions Min Typ. Max Units
Results
Optical characteristics
CW /
Operation mode CW / Modulated
Modulated
Nominal output power Pnom 3000 3070 W
Output power tuning range 10 105 10 - 102 %
Emission wavelength λ Pout = Pnom 1068 1080 1070.26 nm
Emission linewidth Δλ Pout = Pnom 3 6 4.45 nm
Switching ON time Pout = Pnom 50 100 38 μs
Switching OFF time Pout = Pnom 50 100 19 μs
Response time in analog
Pout = Pnom 40 μs
control mode
Output power modulation rate Pout = Pnom 5 5.0 kHz
Pout = Pnom
Output power instability ±1 ±2 ± 1.0 %
(T = constant)
Optical output
Delivery fiber connector HLC-8 tested
Beam parameter product* Delivery fiber core mm x
BPP 3.3 4 3.07
(86 %) diameter 100μm mrad
Beam parameter product** Delivery fiber core mm x
BPP 3.41
(2nd moment) diameter 100μm mrad
Delivery fiber length L 10 20 TBD 20 m
High back reflection test Passed
TEST RESULTS Form: M69-00364
YTTERBIUM LASER SYSTEM Revision: 1
Model YLS-3000-K Spec: G22-252099
Page: 2 of 13
S/N R19051602
Cooling
Tap and slightly DI-
Cooling method tested
water
Water flow for laser cooling Twater = 20 - 22°С 17 25 40 l/min
Electrical characteristics
400 - 460 V/3P + PE
Operation voltage, 3 phases tested VAC
@ 50 – 60 Hz
Laser power consumption Pout = 3000 W 7.5 8.6 7.38 kW
* Measurement accuracy by means of Primes Focus Monitor ± 10 %
**BAFA criteria, the BPP value per 2nd moment definition as per standard ISO 11146-1:2005
08/05/19 10:40:36
Date:
AM
Tested by Dipl. Eng. Orlov Aleksey
Approved by Qual. Cont. Eng. Bagriev Anton
This document has been created automatically and is valid without a signature
TEST RESULTS Form: M69-00364
YTTERBIUM LASER SYSTEM Revision: 1
Model YLS-3000-K Spec: G22-252099
Page: 3 of 13
S/N R19051602
Fig. 1 Output spectrum
Fig. 2 Beam parameter product (86%) measured using F100/300 optics
TEST RESULTS Form: M69-00364
YTTERBIUM LASER SYSTEM Revision: 1
Model YLS-3000-K Spec: G22-252099
Page: 4 of 13
S/N R19051602
Fig. 3 Output power vs. time
Fig. 4 Output power vs. current
TEST RESULTS Form: M69-00364
YTTERBIUM LASER SYSTEM Revision: 1
Model YLS-3000-K Spec: G22-252099
Page: 5 of 13
S/N R19051602
Fig. 5 Output power vs. analogue control voltage
Fig. 6 Analogue output power monitor voltage vs. output power
TEST RESULTS Form: M69-00364
YTTERBIUM LASER SYSTEM Revision: 1
Model YLS-3000-K Spec: G22-252099
Page: 6 of 13
S/N R19051602
Fig. 7 Switching ON characteristic at maximum output power
(blue trace: modulation signal, red trace: laser output signal).
Measured switch ON time 38 μs
Fig. 8 Switching OFF characteristic at maximum output power
(blue trace: modulation signal, red trace: laser output signal).
Measured switch OFF time 19 μs
TEST RESULTS Form: M69-00364
YTTERBIUM LASER SYSTEM Revision: 1
Model YLS-3000-K Spec: G22-252099
Page: 7 of 13
S/N R19051602
Fig. 9 Laser output digital modulation at frequency of 100 Hz
at maximum output power
(blue trace: modulation signal, red trace: laser output signal)
Fig. 10 Laser output digital modulation at frequency of 500 Hz
at maximum output power
(blue trace: modulation signal, red trace: laser output signal)
TEST RESULTS Form: M69-00364
YTTERBIUM LASER SYSTEM Revision: 1
Model YLS-3000-K Spec: G22-252099
Page: 8 of 13
S/N R19051602
Fig. 11 Laser output digital modulation at frequency of 1000 Hz
at maximum output power
(blue trace: modulation signal, red trace: laser output signal)
Fig. 12 Laser output digital modulation at frequency of 3000 Hz
at maximum output power
(blue trace: modulation signal, red trace: laser output signal)
TEST RESULTS Form: M69-00364
YTTERBIUM LASER SYSTEM Revision: 1
Model YLS-3000-K Spec: G22-252099
Page: 9 of 13
S/N R19051602
Fig. 13 Laser output digital modulation at frequency of 5000 Hz
at maximum output power
(blue trace: modulation signal, red trace: laser output signal)
Fig. 14 Demonstration of ramping time variation
(switching ON / switching OFF time variation) option.
Rise time 3 s, fall time 1 s
TEST RESULTS Form: M69-00364
YTTERBIUM LASER SYSTEM Revision: 1
Model YLS-3000-K Spec: G22-252099
Page: 10 of 13
S/N R19051602
Fig. 15 Laser output analogue modulation at frequency of 100 Hz
with DC offset of 1 V over modulation signal
(blue trace: modulation signal, red trace: laser output signal)
Fig. 16 Laser output analogue modulation at frequency of 500
Hz with DC offset of 1 V over modulation signal
(blue trace: modulation signal, red trace: laser output signal)
TEST RESULTS Form: M69-00364
YTTERBIUM LASER SYSTEM Revision: 1
Model YLS-3000-K Spec: G22-252099
Page: 11 of 13
S/N R19051602
Fig. 17 Laser output analogue modulation at frequency of 1000 Hz
with DC offset of 1 V over modulation signal
(blue trace: modulation signal, red trace: laser output signal)
Fig. 18 Laser output analogue modulation at frequency of 3000 Hz
with DC offset of 1 V over modulation signal
(blue trace: modulation signal, red trace: laser output signal)
TEST RESULTS Form: M69-00364
YTTERBIUM LASER SYSTEM Revision: 1
Model YLS-3000-K Spec: G22-252099
Page: 12 of 13
S/N R19051602
Fig. 19 Laser output analogue modulation at frequency of 5000 Hz
with DC offset of 1 V over modulation signal
(blue trace: modulation signal, red trace: laser output signal)
Fig. 20 Laser output delay by output analogue modulation at frequency of 5000
Hz with DC offset of 1 V over modulation signal (blue trace: modulation signal,
red trace: laser output signal). Response time 40 μs
TEST RESULTS Form: M69-00364
YTTERBIUM LASER SYSTEM Revision: 1
Model YLS-3000-K Spec: G22-252099
Page: 13 of 13
S/N R19051602
Fig. 21 Photo of fiber connector optical surface
