Scribd
Upload
31 views2 pages

Capxon (Polymer) 2011 PH Series

The document describes a PH series of high voltage, high reliability capacitors. It provides specifications for the capacitors including operating temperature range, capacitance range and tolerance, rated voltage range, ESR, endurance test results, and permissible ripple current levels at different frequencies. Dimensional drawings and characteristics lists with voltage, capacitance, ESR and size are also included.

Uploaded by

hes545
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
31 views2 pages

Capxon (Polymer) 2011 PH Series

The document describes a PH series of high voltage, high reliability capacitors. It provides specifications for the capacitors including operating temperature range, capacitance range and tolerance, rated voltage range, ESR, endurance test results, and permissible ripple current levels at different frequencies. Dimensional drawings and characteristics lists with voltage, capacitance, ESR and size are also included.

Uploaded by

hes545
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

PH series

PH series High Voltage/High Reliability


Features
◆ High voltage and high reliability
◆ Large permissible ripple current.
◆ Low ESR at high frequency range.

Specifications
Item Performance Characteristics
Operating Temp. Range -55℃∼+105℃
Capacitance Range 22∼100μF
Capacitance Tolerance M：±20%
Rated Voltage Range 35V DC
Dissipation Factor
Not to exceed the value specified
（at 120Hz,20℃）
Leakage Current ≤0.2CV (μA, after 2 minutes)
ESR（100K~300KHz） Not to exceed the value specified
Capacitance Change Within ±20% of the value before test

Endurance Leakage current Not to exceed the value specified


105℃，2000h，at rated voltage ESR Not to exceed 150% of the value specified

Dissipation Factor Not to exceed 150% of the value specified

Capacitance Change Within ±20% of the value before test


Moisture Resistance Leakage Current Not to exceed the value specified
Stored at 60℃，RH90~95%，
2000h ESR Not to exceed 150% of the value specified

Dissipation Factor Not to exceed 150% of the value specified

Frequency Coefficient for Ripple Current


Frequency 120Hz≦freq.<1KHz 1KHz≦freq.<10KHz 10KHz≦freq.<100KHz 100KHz≦freq.<300KHz
Coefficient 0.05 0.3 0.7 1

Diagram of Dimensions:(unit:mm)

φD×L φD+0.5max. α F±0.5 φd±0.05

8×11.5 8.0 1.5 3.5 0.6

10×12.5 10.0 1.5 5.0 0.6

38
PH series

Characteristics List φDxL(mm)

W.V. Capacitance L.C. tgδ ESR Maximum Permissible Ripple Size


（V） (μF) (μA,2min) (120Hz,20℃) (mΩ,100kHz) Current(mA,r.m.s) ΦD×L(mm)
10 100 0.12 25 2890 8*11.5
22 154 0.12 25 2890 8*11.5
33 231 0.12 25 2890 8*11.5
39 273 0.12 25 2890 8*11.5
2890 8*11.5
47 329 0.12 25
35 3500 10*12.5
2890 8*11.5
56 392 0.12 25
3500 10*12.5
68 476 0.12 20 3700 10*12.5
82 574 0.12 20 3700 10*12.5
100 700 0.12 20 3700 10*12.5

Conductive Polymer
Ripple Current ( mA, rms ) at 105℃, 100KHz

39

You might also like