Read This First Manuals Provided with This Machine

Safety Information for This Machine

Other Information for This Machine

Appendix

For information not in this manual, refer to

the HTML/PDF files on the supplied
CD-ROM.

Read this manual carefully before you use this machine and keep
it handy for future reference. For safe and correct use, be sure to
read the Safety Information in this manual before using the
machine.
TABLE OF CONTENTS
How to Read the Manuals................................................................................................................................. 2
Symbols Used in the Manuals.......................................................................................................................2
Disclaimer........................................................................................................................................................2
Notes............................................................................................................................................................... 3
Machine Types............................................................................................................................................... 3
1. Manuals Provided with This Machine
Manuals for This Machine................................................................................................................................. 5
How to Use the Operating Instructions............................................................................................................. 7
Start Installer................................................................................................................................................... 7
Read HTML Manuals..................................................................................................................................... 7
Read the HTML manuals on the control panel.............................................................................................8
2. Safety Information for This Machine
Safety Symbols for This Machine...................................................................................................................... 9
Safety Information............................................................................................................................................ 10
Safety During Operation.............................................................................................................................10
Safety Precautions to Be Followed............................................................................................................. 10
Safety Labels of This Machine.........................................................................................................................17
Positions of WARNING and CAUTION labels.........................................................................................17
Symbols for Power Switch...........................................................................................................................20
3. Other Information for This Machine
Laws and Regulations...................................................................................................................................... 21
Duplication and Printing Prohibited............................................................................................................ 21
Laser Safety.................................................................................................................................................. 21
EMC Directive.............................................................................................................................................. 22
User Information on Electrical and Electronic Equipment (For Users in India)........................................22
NOTICE TO USERS (NEW ZEALAND)..................................................................................................... 22
4. Appendix
Trademarks....................................................................................................................................................... 25

1
 How to Read the Manuals
Symbols Used in the Manuals

This manual uses the following symbols:

Indicates points to pay attention to when using the machine, and explanations of likely causes of paper
misfeeds, damage to originals, or loss of data. Be sure to read these explanations.

Indicates supplementary explanations of the machine's functions, and instructions on resolving user
errors.

This symbol is located at the end of sections. It indicates where you can find further relevant information.

[]
Indicates the names of keys on the machine's display or control panels.

Indicates instructions displayed on the control panel.

Indicates instructions in sheet form.

(mainly Europe and Asia), (mainly Europe), or (mainly Asia)
(mainly North America)
Differences in the functions of Region A and Region B models are indicated by two symbols. Read the
information indicated by the symbol that corresponds to the region of the model you are using. For
details about which symbol corresponds to the model you are using, see "Model-Specific Information",
Getting Started .

Disclaimer

To the maximum extent permitted by applicable laws, in no event will the manufacturer be liable for any
damages whatsoever arising out of failures of this machine, losses of the registered data, or the use or
non-use of this product and operation manuals provided with it.
Make sure that you always copy or have backups of the data registered in this machine. Documents or
data might be erased due to your operational errors or malfunctions of the machine.

2
In no event will the manufacturer be responsible for any documents created by you using this machine or
any results from the data executed by you.

Notes

Contents of this manual are subject to change without prior notice.

Some illustrations in this manual might be slightly different from the machine.
For good output quality, the manufacturer recommends that you use genuine toner from the
manufacturer.
The manufacturer shall not be responsible for any damage or expense that might result from the use of
parts other than genuine parts from the manufacturer with your office products.

Machine Types

Check the type of your machine before reading the manuals.

• Type 1: MP 2555SP
• Type 2: MP 3055SP
• Type 3: MP 3555SP
• Type 4: MP 4055SP
• Type 5: MP 5055SP
• Type 6: MP 6055SP
Certain types might not be available in some countries. For details, please contact your local dealer.
Certain options might not be available in some countries. For details, please contact your local dealer.
Depending on which country you are in, certain units may be optional. For details, please contact your
local dealer.

3
4
1. Manuals Provided with This Machine
This chapter explains manuals for this machine.

Manuals for This Machine

The operating instructions of this machine are provided in the following formats:

Format Manuals

Printed manuals • Read This First

• Start Guide

CD-ROM • Driver Installation Guide

• HTML manuals (Only for English version)

Manuals displayed on the control panel • Operating Instructions (HTML manuals)

Web page • Read This First

• User Guide
• Start Guide
• Operating Instructions (HTML manuals)
• Quick Reference Guide
• Driver Installation Guide

Read This First

Before using the machine, be sure to read the section of this manual entitled Safety Information. It
also describes each regulation and environmental conformance.
Start Guide
Describes how to read manuals on the control panel. It also describes how to log in to the machine.
User Guide
Regarding the basic usage of this machine, frequently used functions, troubleshooting when an
error message appears, etc., summaries are provided for each user manual.
Operating Instructions (HTML manuals)
Describes the setup for using the machine, how to use functions to copy, fax, print, scan or for
maintenance and specifications, troubleshooting, system settings, and security functions.
Manuals are available in English, German, French, Italian, Spanish, Dutch, and Russian.
User Guide and Security Guide are available in the seven languages above and other languages.

5
 1. Manuals Provided with This Machine

For details about how to use the HTML manuals, see page 7 "How to Use the Operating
Instructions".
Quick Reference Guide
Describes per page the basic functions of copy, fax, and scan.
• Quick Reference Copy Guide
• Quick Reference Fax Guide
• Quick Reference Scanner Guide
Driver Installation Guide
Describes how to install and configure each driver. This manual is included in the drivers CD.

• Before you configure the extended security and authentication settings, refer to "Before Using This
Machine" in the Security Guide .
• You can download information about the machine's certification, which is based on an IT security
certification system (hereafter CC Certification), from https://support.ricoh.com/services/device/
ccmanual/mp_2555_3055_3555_4055_5055_6055/en/download_admin.html and https://
support.ricoh.com/services/device/ccmanual/
mp_2555_3055_3555_4055_5055_6055/en/download_user.html. This information is about
how to set up the machine. If you have purchased a CC Certified machine, be sure to read it
before operating the machine so you can make the correct settings before using it.
• You can see the following manuals on the Web page.
• Appendix
• DHCP Option 204

6
 How to Use the Operating Instructions

How to Use the Operating Instructions

This chapter describes the operating instructions of this machine.

Start Installer

The installer starts automatically when you insert the provided CD-ROM into the CD-ROM drive of a
client computer. Follow the on-screen instructions.
Auto Run might not work automatically with certain OS settings. If this is the case, double-click
"setup.exe".

Read HTML Manuals

The following browsers are recommended to read the HTML manuals.

• Internet Explorer 9/10/11
• Firefox 29
• Safari 5.1.7
• Chrome 35

• If JavaScript is disabled or unavailable in your browser, you will not be able to search or use
certain buttons in the HTML documentation.
• The required display resolution is 1,024 × 768 pixels or greater.
• In the help on the top right of the top page, you can check how to use the HTML manuals. The help
topics explain the icons and buttons that are displayed in the HTML manuals.

Search for what you want to do or can do

Using Easy Search, you can search for what want to do or can do with this machine.

1. Click Easy Search on the top right of the top page.

2. Click a title to display the item you want to read.

Search by entering a keyword

You can search through the HTML manuals.

This section explains how to search for "duplex".

1. Enter "duplex" in the search box on the top left of the top page.

7
 1. Manuals Provided with This Machine

2. Click .
A list of titles or descriptions that include "duplex" appears.
A search result appears in the search result window. In addition you can use the drop-down menu
to select a manual.
3. Click a title to display the item you want to read.

• Use keywords to search for items you want to query. Depending on the keyword you enter, related
keywords might also appear.
• Items including the used keyword is appear in the search result window.
• If you put a space between keywords, pages that contain both keywords are displayed. For
example, if you enter "duplex" and a space and "copy", items including both words appear in the
search result window.

Read the HTML manuals on the control panel

You can also read the HTML manuals on the control panel. For details about how to read the HTML
manuals on the control panel, see Start Guide .

8
2. Safety Information for This Machine
This chapter describes the safety precautions.

Safety Symbols for This Machine

The meanings of the safety symbols for this machine are as follows:

Caution

Do not touch

Do not throw into the fire

Do not use the cleaner

Keep out of reach of children

Caution, hot surface

Caution, risk of having hands or arms

caught

9
 2. Safety Information for This Machine

Safety Information
Safety During Operation

In this manual, the following important symbols are used:

Indicates a potentially hazardous situation which, if instructions are not followed, could result in death
or serious injury.

Indicates a potentially hazardous situation which, if instructions are not followed, may result in minor
or moderate injury or damage to property.

Safety Precautions to Be Followed

This section explains safety precautions that should always be followed when using this machine.

Environments where the machine can be used

This section explains safety precautions about environments where the machine can be used.

• Do not use flammable sprays or solvents in the vicinity of this machine. Also, avoid placing these
items in the vicinity of this machine. Doing so could result in fire or electric shock.

• Do not place vases, plant pots, cups, toiletries, medicines, small metal objects, or containers
holding water or any other liquids, on or close to this machine. Fire or electric shock could result
from spillage or if such objects or substances fall inside this machine.

• Keep the machine away from humidity and dust. Otherwise a fire or an electric shock might
occur.

• Do not place the machine on an unstable or tilted surface. If it topples over, an injury might
occur.

• Do not place heavy objects on the machine. Doing so can cause the machine to topple over,
possibly resulting in injury.

10
 Safety Information

• Make sure the room where you are using the machine is well ventilated and spacious. Good
ventilation is especially important when the machine is used heavily.

• Do not obstruct the machine's vents. Doing so risks fire caused by overheated internal
components.

Handling power cords and power cord plugs

This section explains safety precautions about handling power cords and power cord plugs.

• Do not use any power sources other than those that match the specifications shown. Doing so
could result in fire or electric shock.

• Do not use any frequencies other than those that match the specifications shown. Doing so could
result in fire or electric shock.

• Do not use multi-socket adaptors. Doing so could result in fire or electric shock.

• Do not use extension cords. Doing so could result in fire or electric shock.

• Do not use power cords that are damaged, broken, or modified. Also, do not use power cords
that have been trapped under heavy objects, pulled hard, or bent severely. Doing so could
result in fire or electric shock.

• Touching the prongs of the power cable's plug with anything metallic constitutes a fire and
electric shock hazard.

• The supplied power cord is for use with this machine only. Do not use it with other appliances.
Doing so could result in fire or electric shock.

• It is dangerous to handle the power cord plug with wet hands. Doing so could result in electric
shock.

• If the power cord is damaged and its inner wires are exposed or broken, contact your service
representative for a replacement. Use of damaged power cords could result in fire or electric
shock.

11
 2. Safety Information for This Machine

• Be sure to disconnect the plug from the wall outlet at least once a year and check for the
following:
• There are burn marks on the plug.
• The prongs on the plug are deformed.
• If any of the above conditions exist, do not use the plug and consult your dealer or service
representative. Use of the plug could result in fire or electric shock.

• Be sure to disconnect the power cord from the wall outlet at least once a year and check for the
following:
• The power cord's inner wires are exposed, broken, etc.
• The power cord's coating has a crack or dent.
• When bending the power cord, the power turns off and on.
• Part of the power cord becomes hot.
• The power cord is damaged.
• If any of the above conditions exist, do not use the power cord and consult your dealer or
service representative. Use of the power cord could result in fire or electric shock.

• Be sure to push the plug of the power cord fully into the wall outlet. Partially inserted plugs
create an unstable connection that can result in unsafe buildup of heat.

• If this machine is not going to be used for several days or longer at a time, disconnect its power
cord from the wall outlet.

• When disconnecting the power cord from the wall outlet, always pull the plug, not the cord.
Pulling the cord can damage the power cord. Use of damaged power cords could result in fire
or electric shock.

• Be sure to disconnect the plug from the wall outlet and clean the prongs and the area around
the prongs at least once a year. Allowing dust to build up on the plug constitutes a fire hazard.

• When performing maintenance on the machine, always disconnect the power cord from the
wall outlet.

• Power Source
220–240 V, 8 A, 50/60 Hz
Please be sure to connect the power cord to a power source as above.

12
 Safety Information

Handling the main machine

This section explains safety precautions about handling the main machine.

• Be sure to locate the machine as close as possible to a wall outlet. This will allow easy
disconnection of the power cord in the event of an emergency.

• If the machine emits smoke or odours, or if it behaves unusually, you must turn off its power
immediately. After turning off the power, be sure to disconnect the power cord plug from the
wall outlet. Then contact your service representative and report the problem. Do not use the
machine. Doing so could result in fire or electric shock.

• If metal objects, or water or other fluids fall inside this machine, you must turn off its power
immediately. After turning off the power, be sure to disconnect the power cord plug from the
wall outlet. Then contact your service representative and report the problem. Do not use the
machine. Doing so could result in fire or electric shock.

• Do not touch this machine if a lightning strike occurs in the immediate vicinity. Doing so could
result in electric shock.

• The following explains the warning messages on the plastic bag used in this product's
packaging.
• Keep the polythene materials (bags, etc.) supplied with this machine away from babies
and small children at all times. Suffocation can result if polythene materials are brought into
contact with the mouth or nose.

• Unplug the power cord from the wall outlet before you move the machine. While moving the
machine, take care that the power cord is not damaged under the machine. Failing to take these
precautions could result in fire or electric shock.

• If you have to move the machine when the optional paper tray unit is attached, do not push on
the main unit's top section. Doing so can cause the optional paper tray unit to detach, possibly
resulting in injury.

• After you move the machine, use the caster fixture to fix it in place. Otherwise the machine might
move or come down to cause an injury.

• If the lower paper tray is installed, do not pull out more than one tray at a time when you are
changing or replenishing paper or resolving paper jams. Pressing down forcefully on the
machine's upper surfaces can result in malfunctions and/or user injury.

13
 2. Safety Information for This Machine

• Contact your service representative if you need to lift the machine (such as when relocating it to
another floor). Do not attempt to lift the machine without the assistance of your service
representative. The machine will be damaged if it topples or is dropped, resulting in malfunction
and risk of injury to users.

• Do not look into the lamp. It can damage your eyes.

• Do not hold the control panel while moving the machine. Doing so may damage the control
panel, cause a malfunction, or result in injury.

• Keep your hands away from the hinges and exposure glass when lowering the ADF. Not doing
so result in an injury if your hands or fingers are pinched.

Handling the machine's interior

This section explains safety precautions about handling the machine's interior.

• Do not remove any covers or screws other than those explicitly mentioned in this manual. Inside
this machine are high voltage components that are an electric shock hazard and laser
components that could cause blindness. Contact your sales or service representative if any of the
machine's internal components require maintenance, adjustment, or repair.
• Do not attempt to disassemble or modify this machine. Doing so risks burns and electric shock.
Note again that exposure to the laser components inside this machine risks blindness.

• Some of this machine's internal components get very hot. For this reason, take care when
removing misfed paper. Not doing so could result in burns.

• Some of the internal components of this machine might be fragile. When you remove jammed
paper, do not touch the sensors, connectors, LEDs, or other fragile parts that are shown in the
Troubleshooting manual. Doing so may cause malfunctions.

• When removing jammed paper, make sure not to trap or injure your fingers.

• When loading paper, take care not to trap or injure your fingers.

• Keep your hands clear of the booklet finisher tray when removing misfed paper, pulling out or
pushing in the finisher's staple unit. You can trap and injure your fingers if you do not.

14
 Safety Information

• While safety measures have been installed to prevent accidents, you must not touch the
machine's rollers while it is operating. Doing so could cause injury.

• If the machine's interior is not cleaned regularly, dust will accumulate. Fire and breakdown can
result from heavy accumulation of dust inside this machine. Contact your sales or service
representative for details about and charges for cleaning the machine's interior.

Handling the machine's supplies

This section explains safety precautions about handling the machine's supplies.

• Do not incinerate toner (new or used) or toner containers. Doing so risks burns. Toner will ignite
on contact with naked flame.

• Do not store toner (new or used) or toner containers anywhere near naked flames. Doing so
risks fire and burns. Toner will ignite on contact with naked flame.

• Do not use a vacuum cleaner to remove spilled toner (including used toner). Absorbed toner
may cause a fire or explosion due to electrical contact flickering inside the vacuum cleaner.
However, it is possible to use a vacuum cleaner that is explosion-proof and dust ignition-proof. If
toner is spilled on the floor, remove the spilled toner slowly using a wet cloth, so that the toner is
not scattered.

• The following explains the warning messages on the plastic bag used in this product's
packaging.
• Keep the polythene materials (bags, gloves, etc.) supplied with this machine away from
babies and small children at all times. Suffocation can result if polythene materials are
brought into contact with the mouth or nose.

• Do not crush or squeeze toner containers. Doing so can cause toner spillage, possibly resulting
in dirtying of skin, clothing, and floor, and accidental ingestion.

• Store toner (new or used), toner containers, and components that have been in contact with
toner out of reach of children.

• If toner or used toner is inhaled, gargle with plenty of water and move into a fresh air
environment. Consult a doctor if necessary.

15
 2. Safety Information for This Machine

• If toner or used toner gets into your eyes, flush immediately with large amounts of water. Consult
a doctor if necessary.

• If toner or used toner is swallowed, dilute by drinking a large amount of water. Consult a doctor
if necessary.

• When removing jammed paper or replacing toner, avoid getting toner (new or used) on your
clothing. If toner comes into contact with your clothing, wash the stained area with cold water.
Hot water will set the toner into the fabric and make removing the stain impossible.

• When removing jammed paper or replacing toner, avoid getting toner (new or used) on your
skin. If toner comes into contact with your skin, wash the affected area thoroughly with soap and
water.

• When replacing a toner or waste toner container or consumables with toner, make sure that the
toner does not splatter. Put the waste consumables in a bag after they are removed. For
consumables with a lid, make sure that the lid is shut.

• Do not attempt to print on stapled sheets, aluminum foil, carbon paper, or any kind of
conductive paper. Doing so risks fire.

• Keep SD cards or USB flash memory devices out of reach of children. If a child accidentally
swallows an SD card or USB flash memory device, consult a doctor immediately.

16
 Safety Labels of This Machine

Safety Labels of This Machine

This section explains the machine's safety information labels.

Positions of WARNING and CAUTION labels

This machine has labels for WARNING and CAUTION at the positions shown below. For safety,
please follow the instructions and handle the machine as indicated.

Main unit

DRX001

1.
Do not touch the parts a label indicates. The inside of the machine could be very hot. Caution should be
taken when removing misfed paper.

17
 2. Safety Information for This Machine

Paper trays

DRX002

1 and 2.
The inside of the machine could be very hot. Do not touch the parts which a label is put on. Otherwise,
an injury might occur.

Finisher SR3210 or Booklet Finisher SR3220

DRX003

1.

18
 Safety Labels of This Machine

During operation, rollers for transporting the paper revolve. Take care not to touch rollers during
operation. Otherwise, an injury might occur.
2.
Keep your hands clear of the booklet finisher tray when pulling out or pushing in the finisher's staple unit,
or removing paper jam. You might trap your fingers if you do not. Take care not to touch the booklet
finisher tray during operation. Otherwise, an injury might occur.
3.
Keep your hands clear of the booklet finisher tray when pulling out or pushing in the finisher's staple unit,
or removing paper jam. You might trap your fingers if you do not.

Finisher SR3230 or Booklet Finisher SR3240

1 6

5
2

3
4

DRX004

1 and 2.
During operation, rollers for transporting the paper revolve. Take care not to touch rollers during
operation. Otherwise, an injury might occur.
3.
Keep your hands clear of the booklet finisher tray when pulling out or pushing in the finisher's staple unit,
or removing paper jam. You might trap your fingers if you do not. Take care not to touch the booklet
finisher tray during operation. Otherwise, an injury might occur.

19
 2. Safety Information for This Machine

4 and 5.
Be careful of the protruding parts of the front cover when replacing the cartridge in the saddle stitch unit
or clearing a paper jam from the saddle stitch unit.
6.
Keep your hands clear of the booklet finisher tray when pulling out or pushing in the finisher's staple unit,
or removing paper jam. You might trap your fingers if you do not.

Internal Finisher SR3180

DRX005

1.
The inside of the machine could be very hot. Do not touch the parts which a label is put on. Otherwise,
an injury might occur.

Symbols for Power Switch

Symbols for power switch that are used for this machine are as follows:
• : POWER ON
• : STANDBY

20
3. Other Information for This Machine
This chapter describes laws and regulations related to this machine.

Laws and Regulations

Duplication and Printing Prohibited

Do not copy or print any item for which reproduction is prohibited by law.
Copying or printing the following items is generally prohibited by local law:
bank notes, revenue stamps, bonds, stock certificates, bank drafts, checks, passports, driver's licenses.
The preceding list is meant as a guide only and is not inclusive. We assume no responsibility for its
completeness or accuracy. If you have any questions concerning the legality of copying or printing
certain items, consult with your legal advisor.

Laser Safety

Laser Safety for Type 1, 2, and 3

This machine complies with the requirements of IEC60825-1:2014 for class 1 laser product. The
machine contains one AlGaInP laser diode, 660 nanometer wavelength. The beam divergence angle is
21 degrees (minimum) and 29 degrees (maximum) in the vertical direction, and 7 degrees (minimum)
and 11 degrees (maximum) in the horizontal direction, and laser beams are generated in Continuous
Wave (CW) mode. The maximum output power of each light source is 10 milliwatt.
The following label is attached on the rear side of the machine:

Caution
Use of controls or adjustments or performance of procedures other than those specified in this manual
might result in hazardous radiation exposure.

21
 3. Other Information for This Machine

Laser Safety for Type 4, 5, and 6

This machine complies with the requirements of IEC60825-1:2014 for class 1 laser product. The
machine contains two AlGaInP laser diodes, 660 nanometer wavelength for each emitter. The beam
divergence angle is 15 degrees (minimum) and 25 degrees (maximum) in the vertical direction, and 7
degrees (minimum) and 13 degrees (maximum) in the horizontal direction, and laser beams are
generated in Continuous Wave (CW) mode. The maximum output power of the light source is 15
milliwatt.
The following label is attached on the rear side of the machine:

Caution
Use of controls or adjustments or performance of procedures other than those specified in this manual
might result in hazardous radiation exposure.

EMC Directive

Installing the Ferrite Core

An Ethernet interface cable connected to the USB Device Server Option port and a telephone line cable
with a ferrite core must be used for RF interference suppression.

User Information on Electrical and Electronic Equipment (For Users in India)

This product complies with the "India E-waste Rule 2011" and prohibits use of lead, mercury,
hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers in concentrations
exceeding 0.1 weight % and 0.01 weight % for cadmium, except for the exemptions set in Schedule 2
of the Rule.

NOTICE TO USERS (NEW ZEALAND)

• The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has
accepted that the item complies with minimum conditions for connection to its network. It indicates
no endorsement of the product by Telecom, nor does it provide any sort of warranty. Above all, it
provides no assurance that any item will work correctly in all respects with another item of

22
 Laws and Regulations

Telepermitted equipment of a different make or model, nor does it imply that any product is
compatible with all of Telecom's network services.
• This equipment is not capable, under all operating conditions, of correct operation at the higher
speeds for which it is designed. Telecom will accept no responsibility should difficulties arise in such
circumstances.
• Devices connected to the telephone port may lose their memory if this fax machine is on line for
extended periods. To prevent this, such devices should have the facility for battery or similar
backup of memory.
• This device may be subject to ringing or bell tinkle when certain other devices are connected to the
same line. If this occurs, the problem should not be referred to the Telecom Faults Service.
• This equipment should not be used under any circumstances that may constitute a nuisance to other
Telecom customers.
• Telepermitted equipment only may be connected to the auxiliary telephone port. The auxiliary
telephone port is not specifically designed for 3-wire connected equipment that may not respond to
incoming ringing when attached to this port.

23
 3. Other Information for This Machine

24
4. Appendix
This appendix describes trademarks for the machine.

Trademarks
Adobe is a trademark of Adobe Systems Incorporated in the United States and/or other countries.
Firefox is a registered trademark of the Mozilla Foundation.
Google and Chrome are trademarks of Google Inc.
Microsoft, Windows, and Internet Explorer are either registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other countries.
Safari is a trademark of Apple Inc., registered in the United States and other countries.
The SD is a trademark of SD-3C, LLC.
The proper names of Internet Explorer 9, 10 and 11 are as follows:
• Windows® Internet Explorer® 9
• Internet Explorer® 10
• Internet Explorer® 11
Other product names used herein are for identification purposes only and might be trademarks of their
respective companies. We disclaim any and all rights to those marks.

25
 MEMO

26
MEMO

27
 MEMO

28 EN AU D284-7010
© 2016
EN AU D284-7010