UV Printer Manual

A3-19
 Catalog

Ⅰ. Product Specifications..........................................................................................................2

（1）Product introduction...................................................................................................3

（2） Product application range.........................................................................................3

（3） Product detailed view and connection port.............................................................3

（4）Introduction to Printer Keys....................................................................................... 4

（5）Introduction to touch screen......................................................................................4

Ⅱ. Machine Installation And Setting........................................................................................ 7

1. Machine Basic Inspection................................................................................................. 7

2. Filling with cooling water.................................................................................................. 8

3. Print driver installation..................................................................................................... 9

4. Install the AcroRIP software............................................................................................13

5. Software Introduce......................................................................................................... 17

6. AcroRIP curve setting and left and right baseline printing............................................ 21

Video：06, software settings and printing.....................................................................21

Attention:............................................................................................................................24

7. Filling ink and dredging the nozzle................................................................................. 24

8. Filling ink and dredging the nozzle................................................................................. 27

9. Printing task.....................................................................................................................32

Ⅲ . Machine Management and Maintenance...................................................................... 40

1
 Ⅰ. Product Specifications

Model A3-19 Print Head Epson R1390

Print Size A3（267*420mm) Platform Size A3（297*420mm)

Print Speed A3(about 1440dpi10min) Software Acro RIP

0~120mm ， Infrared
Print Height System Window XP、7、10
height measurement

Color
Ink Consumption 2
1m /20ml YKWWMC or YKLcLmMC
Configuration

Ink Supply Mode Continuous Ink Supply Relief Printing Support

UV lamp life 3 Years Package Size 75*73*60cm

Water cooling + Air

UV lamp cooling Machine Size 66*66*50cm
cooling

Net Weight /
UV Lamp Power 50~60W 52KG/82KG
Gross Weight

Platform
Key + Infrared height Export wooden case +
Outer Package
measurement Foam
Adjustment

Platform Drive Pulse motor drive

Ink Filtration Double filtration of ink bottle and ink sac

Voltage / Plug AC100~230V/ Optional according to the country

Intelligent infrared anti-collision system, ink absorption pad maintenance

Nozzle Protection
fluid to prevent clogging.
Mobile phone case/leather/lithograph/crystal/acrylic/card/CD/U disk/name
Supported Media
board and other planes
The flatbed printer adopts stable platform technology, Pulse motor drive
method, combined with infrared height measurement, laser positioning,
Note
water cooling + air cooling, suitable for long-term continuous work, wide
printing range, and products within 120mm height Printable

2
（1）Product introduction

UV flatbed printer is also known as universal flatbed printer or flatbed printer. It breaks through the

bottleneck of digital printing technology and realizes the real one-sheet printing, no plate making,

and full-color image printing at one time. Compared with traditional printing technology, it has many

advantages.

（2）Product application range

Most planes can be printed, almost unlimited materials. For example: mobile phone case, slate relief,

acrylic brand, wallet, tempered film customization, wallpaper, ceramic tile, U disk, CD, etc. (some

materials need to be coated)

（3）Product detailed view and connection port

3
（4）Introduction to Printer Keys

Power
Press this button to open and close the printer power
Supply

Press this button to move the print head to the cartridge change
location.
When detecting the service life of the cartridge market, press this
Ink Key / button to print the head to the ink check position.
Clean Key After changing the cartridge, press this button to return the print head
to the initial position.
When the ink indicator lights go out, press the button for 3 seconds to
clean the print head.

Press this button to load or pop out the print paper.

Task
You can resume printing if you press this button when there is a lack of
key/paper
paper error or multiple page feed errors.
key
Press this button when printing jobs to cancel the print.

（5）Introduction to touch screen

（Machine status indication）：

Displays the status of the whole device

Online button：
Click the online button, the print head back at the origin, printer is ready to print

Offline button：
Click the offline button, printing stop, platform stop moving

Forward、Upward、Downward、Backward：
Platform control: Forward/ Upward / Downward / Backward

4
 Machine Status Indication

Online Button / Offline Button

Platform Direction control

5-1.Previous Page button on home screen

Task key / Paper key

Ink key / cleaning key

Power key

5
5-2.The Next page button on the home screen

Power
UV keylamp on and set
curing

White ink cycle Settings

Drive parameter setting

Stroke parameter setting

Sensor signal monitoring

6
Ⅱ. Machine Installation And Setting
1. Machine Basic Inspection

（1）After unpacking, check the appearance of the machine

（2）Power on, check whether the right transmitter of the infrared platform is correctly

aligned with the receiver on the left（Picture as below）

In the middle

（3）Check platform movement through touch screen, Forward/ Upward / Downward

/ Backward
7
 (4) Printer turn on through power key, print head performs a self-test.（Self-test video

is in the U disk “03 Electricity check”）

2. Filling with cooling water

Video：”02 Add cooling water”

1. Unscrew the cover with a flat-blade screwdriver

2. Pour the water into it with a funnel.

3. There is a hole next to it, adding water to two-thirds of it.

8
PS: When adding cooling water, make sure that the water in the water pipe flows and

circulates to the UV lamp.

3. Print driver installation

Video：“04, 05install drivers, software, curves”

1. Turn on the printer until the screen says "Ready to print".And plug the printer USB

cable into the computer

2. Insert data USB flash disk

3. Confirm your computer's operating system is 32 or 64 bit，through "My Computer" -

"Properties"

4. Find the corresponding driver in the U disk and install it.

9
10
11
12
4. Install the AcroRIP software.

1. Before installing the software，Under the root directory of your Computer's C

drive, create a new folder and name it "PartnerV9"

2. Windows XP and Windows 7 do not need to add white list.

For the WIN10 system, add the "PartnerV9" folder to the white list in your computer

Settings.Settings--Update&Security--Windows Security--Virus & Threat Protection

--Manage Settings-- Add or remove Exclusions--Add an Exclusion --Folder-- Add

13
disk C's "PartnerV9" Folder

14
3. Insert the data USB disk for software installation and install the software in the newly

created folder of Disk C（PartnerV9）

15
16
5. Software Introduce

1. The file menu

17
2.The Layout menu

18
3. The printer Settings

19
4.Color menu Settings

5.The setting of White

20
6. AcroRIP curve setting and left and right baseline printing

Video：06, software settings and printing

1.Copy the curves folders “media ”and“ Profile" from USB flash drive to the paste

board

2. Paste it into the "PartnerV9" folder on drive C and replace the file

21
Step：left and right baseline printing

①Click "file" of the software; select "Unit"; check the unit as "mm".

②Click "file" of the software; select "Print Left Right Guide Lines"

Set the light guide line. After filling in the parameters, select "Apply" first and then

"Cancel". Do not click "OK".

22
③"Port" select the correct printer Port: A3=1390 or A4=L800

"Check Paper Size" set to "Off"

④"Print Setting" selects the preset curve Settings

23
Attention:

①The third option "Language" of the software interface to switch languages

②"Print left Right Guide Lines" must be set, otherwise the ink will not solidify on the

right side.

③When the curve folder is pasted to the software installation location, overwrite must

be used

7. Filling ink and dredging the nozzle

1. Fill the ink according to the color of the ink tube, one of the empty bottles is a spare

24
2. To draw the ink, 6 ink sacs are used to draw out 2-3ml ink with a syringe respectively,

and draw about 5ml from the waste ink tube on the right

25
3. Turn on the printer until the screen displays the "Ready to print" status. Use software

to clean the print head （F12）.

26
8. Filling ink and dredging the nozzle

1. Operate the display screen "Forward" to move the platform to the forefront, and stick

a piece of white paper on the flat surface platform，about 10cm from the front.

2. Operate the "Online Button" on the screen to make the platform rise and fall

automatically until "Ready to Print" is displayed on the screen.

27
3.After the device is ready, click "Nozzle Check" on the APP and print a test gauge for

the Nozzle's state (see below).

28
Note: If the print head test line is not neat, there are too many missing lines. Go with

F12 "Head Cleaning" again and print again

4. Print positioning line

Select the corresponding preset curve parameters for printing

5. Grid starting position: X=0,Y=0

29
6. The printed scale grid only needs 1440*720 resolution for printing, and the printed

picture USES 1440*1440 resolution.Image format PNG or TIFF file will be better

30
7. Set print color once and print

31
9. Printing task

（1）Single-print color setting method: select the appropriate curve setting, start

position X50- Y50, print color once（the effect is shown as below）

32
（2）Print white separately
①Setup for printing white ink: Preview white production mode with View

②Fill All Areas: Print the whole painting in white.

③ 100% White under any colored pixel: Print white on transparent background with

color area

④Gradient white under any colored pixel: prints white based on color shadow.

⑤White Gradient (Negative): Print white ink from dark to light step printing.

⑥White Gradient:(Positive): To print white ink from light to dark

⑦ Spot Color (TIFF RGB): Print white on colored areas against a transparent

background.

33
34
(3) Print white and color at the same time(white first then color)
Measure and set the size of the product to be printed

Preview in white using the appropriate white production mode.

35
36
Set the amount of WHITE ink, print once for WHITE setting, print once for COLOR

setting, check "COLOR+WHITE", then start to print it

The effect is shown in figure

(4) Print white and color at the same time(color first then white)

37
For example: If to print a transparent product, need to print on the back, first print in

color, then cover the white. Because it ’ s a reverse look, the image need a mirrored

processing first.

Similarly, first set the white ink volume, and select the white mode "Fill All Area",

then check both "Print Color first" and "COLOR+WHITE", and finally print.

38
The effect is shown in figure

39
Ⅲ . Machine Management and Maintenance
(1) Avoid direct sunlight.

(2) Keep working environment ventilated

(3) Common maintenance measures for the machine

①It is best to insist on printing every day (don't be idle for a long time to reduce the

clogging of the print head)

②Keep the print head and waste ink pump in close contact and seal when shutting

down (the ink cart must be parked on the far right)

③Use a dust-free cloth and alcohol to clean the metal surface of the print head and its

periphery.

④ Keep the ink bag tightly inserted to prevent ink from flowing out and leading to

short circuit damage to the print head circuit board.

⑤Clean the surface of the waste ink pump (around the rubber ring)

⑥Lubricate the rail of the ink cart.

⑦Keep the pump with water (more than half, fill with clean water to two-thirds), and

check the water circulation frequently to avoid damage to the UV lamp due to excessive

temperature.

（4) Ink service life and preservation

Due to its special composition, UV ink will solidify when exposed to light, especially

when the light is particularly strong. Because the light contains ultraviolet rays, UV ink

will chemically react with ultraviolet rays after ultraviolet rays are irradiated. Storage

requirements are also very strict. First of all, storage in the dark is basic. Therefore, we

must take measures to avoid light when storing or refilling UV ink.

40
①Requirements for storage location: The ink storage site must be cool and backlit,

preferably in the innermost part of the warehouse, with a glass platform or a metal

platform, and the height should not exceed 1 meter.

② Ink storage and packaging requirements: black opaque plastic bottles are used for

the outer packaging, and the outer packaging is surrounded by a carton. At the same

time, no other objects can be placed above the ink to avoid squeezing and causing

damage.

③Requirements for ink storage personnel: Except staff, no other people should touch it,

because the ink is corrosive and should not drip into the eyes or skin. If this happens,

flush it with water immediately.

④ UV ink usage requirements: use the ink immediately after opening the seal, and seal

the unused ink immediately. On the one hand, it is to avoid the ink contact with light,

and the other is to prevent the dust and other sundries in the air from entering the ink.

Customers who use UV inks must read the instructions carefully, especially those who

have newly purchased UV roll photo printers or related UV flatbed printers. If they don’

t understand, they must contact the manufacturer in time for consultation. In addition,

be sure to take measures to avoid light when filling UV ink.

Attention：UV ink is prone to curing, so when using a UV roll photo machi

ne or related UV printing equipment, it is necessary to store the UV ink cor

rectly, so as to not only maintain the quality of the ink, extend the service l

ife, but also make the related UV inkjet The printing equipment will print ou

t more high-quality effect patterns for you.

41
Global Technical Support

SKYPE:+86 13713803075

42