3/11/2019 XML Quick Guide

XML - QUICK GUIDE

https://www.tutorialspoint.com/xml/xml_quick_guide.htm Copyright © tutorialspoint.com

Advertisements
XML - OVERVIEW
XML stands for Extensible Markup Language. It is a text-based markup language derived from Standard
Generalized Markup Language S GM L.

XML tags identify the data and are used to store and organize the data, rather than specifying how to display it
like HTML tags, which are used to display the data. XML is not going to replace HTML in the near future, but it
introduces new possibilities by adopting many successful features of HTML.

There are three important characteristics of XML that make it useful in a variety of systems and solutions −

XML is extensible − XML allows you to create your own self-descriptive tags, or language, that suits your
application.

XML carries the data, does not present it − XML allows you to store the data irrespective of how it
will be presented.

XML is a public standard − XML was developed by an organization called the World Wide Web
Consortium W 3C and is available as an open standard.

XML Usage
A short list of XML usage says it all −

XML can work behind the scene to simplify the creation of HTML documents for large web sites.

XML can be used to exchange the information between organizations and systems.

XML can be used for offloading and reloading of databases.

XML can be used to store and arrange the data, which can customize your data handling needs.

XML can easily be merged with style sheets to create almost any desired output.

Virtually, any type of data can be expressed as an XML document.

What is Markup?
XML is a markup language that defines set of rules for encoding documents in a format that is both human-
readable and machine-readable. So what exactly is a markup language? Markup is information added to a
document that enhances its meaning in certain ways, in that it identifies the parts and how they relate to each
other. More specifically, a markup language is a set of symbols that can be placed in the text of a document to
demarcate and label the parts of that document.

Following example shows how XML markup looks, when embedded in a piece of text −

<message>
<text>Hello, world!</text>

https://www.tutorialspoint.com/cgi-bin/printpage.cgi 1/32
3/11/2019 XML Quick Guide

</message>

This snippet includes the markup symbols, or the tags such as <message>...</message> and <text>... </text>.
The tags <message> and </message> mark the start and the end of the XML code fragment. The tags <text> and
</text> surround the text Hello, world!.

Is XML a Programming Language?

A programming language consists of grammar rules and its own vocabulary which is used to create computer
programs. These programs instruct the computer to perform specific tasks. XML does not qualify to be a
programming language as it does not perform any computation or algorithms. It is usually stored in a simple text
file and is processed by special software that is capable of interpreting XML.

XML - SYNTAX
In this chapter, we will discuss the simple syntax rules to write an XML document. Following is a complete XML
document −

<?xml version = "1.0"?>

<contact-info>
<name>Tanmay Patil</name>
<company>TutorialsPoint</company>
<phone>(011) 123-4567</phone>
</contact-info>

You can notice there are two kinds of information in the above example −

Markup, like <contact-info>

The text, or the character data, Tutorials Point and 040 123-4567.

The following diagram depicts the syntax rules to write different types of markup and text in an XML document.

https://www.tutorialspoint.com/cgi-bin/printpage.cgi 2/32
3/11/2019 XML Quick Guide

Let us see each component of the above diagram in detail.

XML Declaration
The XML document can optionally have an XML declaration. It is written as follows −

<?xml version = "1.0" encoding = "UTF-8"?>

Where version is the XML version and encoding specifies the character encoding used in the document.

Syntax Rules for XML Declaration

The XML declaration is case sensitive and must begin with "<?xml>" where "xml" is written in lower-
case.

If document contains XML declaration, then it strictly needs to be the first statement of the XML
document.

The XML declaration strictly needs be the first statement in the XML document.

An HTTP protocol can override the value of encoding that you put in the XML declaration.

Tags and Elements

An XML file is structured by several XML-elements, also called XML-nodes or XML-tags. The names of XML-
elements are enclosed in triangular brackets < > as shown below −

<element>

Syntax Rules for Tags and Elements

Element Syntax − Each XML-element needs to be closed either with start or with end elements as shown below
−

<element>....</element>

or in simple-cases, just this way −

<element/>

Nesting of Elements − An XML-element can contain multiple XML-elements as its children, but the children
elements must not overlap. i.e., an end tag of an element must have the same name as that of the most recent
unmatched start tag.

The Following example shows incorrect nested tags −

<?xml version = "1.0"?>

<contact-info>
<company>TutorialsPoint
<contact-info>
</company>

https://www.tutorialspoint.com/cgi-bin/printpage.cgi 3/32
3/11/2019 XML Quick Guide

The Following example shows correct nested tags −

<?xml version = "1.0"?>

<contact-info>
<company>TutorialsPoint</company>
<contact-info>

Root Element − An XML document can have only one root element. For example, following is not a correct
XML document, because both the x and y elements occur at the top level without a root element −

<x>...</x>
<y>...</y>

The Following example shows a correctly formed XML document −

<root>
<x>...</x>
<y>...</y>
</root>

Case Sensitivity − The names of XML-elements are case-sensitive. That means the name of the start and the
end elements need to be exactly in the same case.

For example, <contact-info> is different from <Contact-Info>

XML Attributes
An attribute specifies a single property for the element, using a name/value pair. An XML-element can have one
or more attributes. For example −

<a href = "http://www.tutorialspoint.com/">Tutorialspoint!</a>

Here href is the attribute name and http://www.tutorialspoint.com/ is attribute value.

Syntax Rules for XML Attributes

Attribute names in XML unlikeH T M L are case sensitive. That is, HREF and href are considered two
different XML attributes.

Same attribute cannot have two values in a syntax. The following example shows incorrect syntax because
the attribute b is specified twice

<a b = "x" c = "y" b = "z">....</a>

Attribute names are defined without quotation marks, whereas attribute values must always appear in
quotation marks. Following example demonstrates incorrect xml syntax

<a b = x>....</a>

https://www.tutorialspoint.com/cgi-bin/printpage.cgi 4/32
3/11/2019 XML Quick Guide

In the above syntax, the attribute value is not defined in quotation marks.

XML References
References usually allow you to add or include additional text or markup in an XML document. References always
begin with the symbol "&" which is a reserved character and end with the symbol ";". XML has two types of
references −

Entity References − An entity reference contains a name between the start and the end delimiters. For
example &amp; where amp is name. The name refers to a predefined string of text and/or markup.

Character References − These contain references, such as &#65;, contains a hash mark “#” followed
by a number. The number always refers to the Unicode code of a character. In this case, 65 refers to
alphabet "A".

XML Text
The names of XML-elements and XML-attributes are case-sensitive, which means the name of start and end
elements need to be written in the same case. To avoid character encoding problems, all XML files should be
saved as Unicode UTF-8 or UTF-16 files.

Whitespace characters like blanks, tabs and line-breaks between XML-elements and between the XML-attributes
will be ignored.

Some characters are reserved by the XML syntax itself. Hence, they cannot be used directly. To use them, some
replacement-entities are used, which are listed below −

Not Allowed Character Replacement Entity Character Description

< &lt; less than

> &gt; greater than

& &amp; ampersand

' &apos; apostrophe

" &quot; quotation mark

XML - DOCUMENTS
An XML document is a basic unit of XML information composed of elements and other markup in an orderly
package. An XML document can contains wide variety of data. For example, database of numbers, numbers
representing molecular structure or a mathematical equation.

XML Document Example

A simple document is shown in the following example −

https://www.tutorialspoint.com/cgi-bin/printpage.cgi 5/32
3/11/2019 XML Quick Guide

<?xml version = "1.0"?>

<contact-info>
<name>Tanmay Patil</name>
<company>TutorialsPoint</company>
<phone>(011) 123-4567</phone>
</contact-info>

The following image depicts the parts of XML document.

Document Prolog Section

Document Prolog comes at the top of the document, before the root element. This section contains −

XML declaration
Document type declaration

You can learn more about XML declaration in this chapter − XML Declaration

Document Elements Section

Document Elements are the building blocks of XML. These divide the document into a hierarchy of sections,
each serving a specific purpose. You can separate a document into multiple sections so that they can be rendered
differently, or used by a search engine. The elements can be containers, with a combination of text and other
elements.

You can learn more about XML elements in this chapter − XML Elements

XML - DECLARATION
This chapter covers XML declaration in detail. XML declaration contains details that prepare an XML
processor to parse the XML document. It is optional, but when used, it must appear in the first line of the XML
document.

Syntax
Following syntax shows XML declaration −

<?xml
version = "version_number"
encoding = "encoding_declaration"
standalone = "standalone_status"
?>

https://www.tutorialspoint.com/cgi-bin/printpage.cgi 6/32
3/11/2019 XML Quick Guide

Each parameter consists of a parameter name, an equals sign = , and parameter value inside a quote. Following
table shows the above syntax in detail −

Parameter Parameter_value Parameter_description

Version 1.0 Specifies the version of the XML standard used.

Encoding UTF-8, UTF-16, ISO- It defines the character encoding used in the document. UTF-
10646-UCS-2, ISO- 8 is the default encoding used.
10646-UCS-4, ISO-
8859-1 to ISO-8859-9,
ISO-2022-JP,
Shift_JIS, EUC-JP

Standalone yes or no It informs the parser whether the document relies on the
information from an external source, such as external
document type definition DT D, for its content. The default
value is set to no. Setting it to yes tells the processor there are
no external declarations required for parsing the document.

Rules
An XML declaration should abide with the following rules −

If the XML declaration is present in the XML, it must be placed as the first line in the XML document.

If the XML declaration is included, it must contain version number attribute.

The Parameter names and values are case-sensitive.

The names are always in lower case.

The order of placing the parameters is important. The correct order is: version, encoding and standalone.

Either single or double quotes may be used.

The XML declaration has no closing tag i.e. </?xml>

XML Declaration Examples

Following are few examples of XML declarations −

XML declaration with no parameters −

<?xml >

XML declaration with version definition −

https://www.tutorialspoint.com/cgi-bin/printpage.cgi 7/32
3/11/2019 XML Quick Guide

<?xml version = "1.0">

XML declaration with all parameters defined −

<?xml version = "1.0" encoding = "UTF-8" standalone = "no" ?>

XML declaration with all parameters defined in single quotes −

<?xml version = '1.0' encoding = 'iso-8859-1' standalone = 'no' ?>

XML - TAGS
Let us learn about one of the most important part of XML, the XML tags. XML tags form the foundation of XML.
They define the scope of an element in XML. They can also be used to insert comments, declare settings required
for parsing the environment, and to insert special instructions.

We can broadly categorize XML tags as follows −

Start Tag
The beginning of every non-empty XML element is marked by a start-tag. Following is an example of start-tag −

<address>

End Tag
Every element that has a start tag should end with an end-tag. Following is an example of end-tag −

</address>

Note, that the end tags include a solidus " / " before the name of an element.

Empty Tag
The text that appears between start-tag and end-tag is called content. An element which has no content is termed
as empty. An empty element can be represented in two ways as follows −

A start-tag immediately followed by an end-tag as shown below −

<hr></hr>

A complete empty-element tag is as shown below −

<hr />

Empty-element tags may be used for any element which has no content.

XML Tags Rules

Following are the rules that need to be followed to use XML tags −

https://www.tutorialspoint.com/cgi-bin/printpage.cgi 8/32
3/11/2019 XML Quick Guide

Rule 1

XML tags are case-sensitive. Following line of code is an example of wrong syntax </Address>, because of the
case difference in two tags, which is treated as erroneous syntax in XML.

<address>This is wrong syntax</Address>

Following code shows a correct way, where we use the same case to name the start and the end tag.

<address>This is correct syntax</address>

Rule 2
XML tags must be closed in an appropriate order, i.e., an XML tag opened inside another element must be closed
before the outer element is closed. For example −

<outer_element>
<internal_element>
This tag is closed before the outer_element
</internal_element>
</outer_element>

XML - ELEMENTS
XML elements can be defined as building blocks of an XML. Elements can behave as containers to hold text,
elements, attributes, media objects or all of these.

Each XML document contains one or more elements, the scope of which are either delimited by start and end
tags, or for empty elements, by an empty-element tag.

Syntax
Following is the syntax to write an XML element −

<element-name attribute1 attribute2>

....content
</element-name>

where,

element-name is the name of the element. The name its case in the start and end tags must match.

attribute1, attribute2 are attributes of the element separated by white spaces. An attribute defines a
property of the element. It associates a name with a value, which is a string of characters. An attribute is
written as −

name = "value"

name is followed by an = sign and a string value inside double"" or single quotes.
′′

Empty Element

https://www.tutorialspoint.com/cgi-bin/printpage.cgi 9/32
3/11/2019 XML Quick Guide

An empty element elementwithnocontent has following syntax −

<name attribute1 attribute2.../>

Following is an example of an XML document using various XML element −

<?xml version = "1.0"?>

<contact-info>
<address category = "residence">
<name>Tanmay Patil</name>
<company>TutorialsPoint</company>
<phone>(011) 123-4567</phone>
</address>
</contact-info>

XML Elements Rules

Following rules are required to be followed for XML elements −

An element name can contain any alphanumeric characters. The only punctuation mark allowed in names
are the hyphen − , under-score _ and period ..

Names are case sensitive. For example, Address, address, and ADDRESS are different names.

Start and end tags of an element must be identical.

An element, which is a container, can contain text or elements as seen in the above example.

XML - ATTRIBUTES
This chapter describes the XML attributes. Attributes are part of XML elements. An element can have multiple
unique attributes. Attribute gives more information about XML elements. To be more precise, they define
properties of elements. An XML attribute is always a name-value pair.

Syntax
An XML attribute has the following syntax −

<element-name attribute1 attribute2 >

....content..
< /element-name>

where attribute1 and attribute2 has the following form −

name = "value"

value has to be in double "" or single quotes. Here, attribute1 and attribute2 are unique attribute labels.
′′

Attributes are used to add a unique label to an element, place the label in a category, add a Boolean flag, or
otherwise associate it with some string of data. Following example demonstrates the use of attributes −

https://www.tutorialspoint.com/cgi-bin/printpage.cgi 10/32
3/11/2019 XML Quick Guide

<?xml version = "1.0" encoding = "UTF-8"?>

<!DOCTYPE garden [
<!ELEMENT garden (plants)*>
<!ELEMENT plants (#PCDATA)>
<!ATTLIST plants category CDATA #REQUIRED>
]>

<garden>
<plants category = "flowers" />
<plants category = "shrubs">
</plants>
</garden>

Attributes are used to distinguish among elements of the same name, when you do not want to create a new
element for every situation. Hence, the use of an attribute can add a little more detail in differentiating two or
more similar elements.

In the above example, we have categorized the plants by including attribute category and assigning different
values to each of the elements. Hence, we have two categories of plants, one flowers and other color. Thus, we
have two plant elements with different attributes.

You can also observe that we have declared this attribute at the beginning of XML.

Attribute Types
Following table lists the type of attributes −

Attribute Type Description

StringType It takes any literal string as a value. CDATA is a StringType. CDATA is character data. This
means, any string of non-markup characters is a legal part of the attribute.

TokenizedType
This is a more constrained type. The validity constraints noted in the grammar are applied
after the attribute value is normalized. The TokenizedType attributes are given as −

ID − It is used to specify the element as unique.

IDREF − It is used to reference an ID that has been named for another element.

IDREFS − It is used to reference all IDs of an element.

ENTITY − It indicates that the attribute will represent an external entity in the
document.

ENTITIES − It indicates that the attribute will represent external entities in the
document.

NMTOKEN − It is similar to CDATA with restrictions on what data can be part of

the attribute.

https://www.tutorialspoint.com/cgi-bin/printpage.cgi 11/32
3/11/2019 XML Quick Guide

NMTOKENS − It is similar to CDATA with restrictions on what data can be part of

the attribute.

This has a list of predefined values in its declaration. out of which, it must assign one
value. There are two types of enumerated attribute −

NotationType − It declares that an element will be referenced to a NOTATION

EnumeratedType
declared somewhere else in the XML document.

Enumeration − Enumeration allows you to define a specific list of values that the
attribute value must match.

Element Attribute Rules

Following are the rules that need to be followed for attributes −

An attribute name must not appear more than once in the same start-tag or empty-element tag.

An attribute must be declared in the Document Type Definition DT D using an Attribute-List Declaration.

Attribute values must not contain direct or indirect entity references to external entities.

The replacement text of any entity referred to directly or indirectly in an attribute value must not contain a
less than sign (<)

XML - COMMENTS
This chapter explains how comments work in XML documents. XML comments are similar to HTML
comments. The comments are added as notes or lines for understanding the purpose of an XML code.

Comments can be used to include related links, information, and terms. They are visible only in the source code;
not in the XML code. Comments may appear anywhere in XML code.

Syntax
XML comment has the following syntax −

<!--Your comment-->

A comment starts with <!-- and ends with -->. You can add textual notes as comments between the characters.
You must not nest one comment inside the other.

Example

Following example demonstrates the use of comments in XML document −

https://www.tutorialspoint.com/cgi-bin/printpage.cgi 12/32
3/11/2019 XML Quick Guide

<?xml version = "1.0" encoding = "UTF-8" ?>

<!--Students grades are uploaded by months-->
<class_list>
<student>
<name>Tanmay</name>
<grade>A</grade>
</student>
</class_list>

Any text between <!-- and --> characters is considered as a comment.

XML Comments Rules

Following rules should be followed for XML comments −

Comments cannot appear before XML declaration.

Comments may appear anywhere in a document.
Comments must not appear within attribute values.
Comments cannot be nested inside the other comments.

XML - CHARACTER ENTITIES

This chapter describes the XML Character Entities. Before we understand the Character Entities, let us first
understand what an XML entity is.

As put by W3 Consortium the definition of an entity is as follows −

"The document entity serves as the root of the entity tree and a starting-point for an XML
processor".

This means, entities are the placeholders in XML. These can be declared in the document prolog or in a DTD.
There are different types of entities and in this chapter we will discuss Character Entity.

Both, HTML and XML, have some symbols reserved for their use, which cannot be used as content in XML code.
For example, < and > signs are used for opening and closing XML tags. To display these special characters, the
character entities are used.

There are few special characters or symbols which are not available to be typed directly from the keyboard.
Character Entities can also be used to display those symbols/special characters.

Types of Character Entities

There are three types of character entities −

Predefined Character Entities

Numbered Character Entities
Named Character Entities

https://www.tutorialspoint.com/cgi-bin/printpage.cgi 13/32
3/11/2019 XML Quick Guide

Predefined Character Entities

They are introduced to avoid the ambiguity while using some symbols. For example, an ambiguity is observed
when less than ( < ) or greater than ( > ) symbol is used with the angle tag (<>). Character entities are basically
used to delimit tags in XML. Following is a list of pre-defined character entities from XML specification. These
can be used to express characters without ambiguity.

Ampersand − &amp;

Single quote − &apos;

Greater than − &gt;

Less than − &lt;

Double quote − &quot;

Numeric Character Entities

The numeric reference is used to refer to a character entity. Numeric reference can either be in decimal or
hexadecimal format. As there are thousands of numeric references available, these are a bit hard to remember.
Numeric reference refers to the character by its number in the Unicode character set.

General syntax for decimal numeric reference is −

&# decimal number ;

General syntax for hexadecimal numeric reference is −

&#x Hexadecimal number ;

The following table lists some predefined character entities with their numeric values −

Entity name Character Decimal reference Hexadecimal reference

quot " &#34; &#x22;

amp & &#38; &#x26;

apos ' &#39; &#x27;

lt < &#60; &#x3C;

gt > &#62; &#x3E;

Named Character Entity

As it is hard to remember the numeric characters, the most preferred type of character entity is the named
character entity. Here, each entity is identified with a name.

https://www.tutorialspoint.com/cgi-bin/printpage.cgi 14/32
3/11/2019 XML Quick Guide

For example −

'Aacute' represents capital character with acute accent.

'ugrave' represents the small with grave accent.

XML - CDATA SECTIONS

In this chapter, we will discuss XML CDATA section. The term CDATA means, Character Data. CDATA is
defined as blocks of text that are not parsed by the parser, but are otherwise recognized as markup.

The predefined entities such as &lt;, &gt;, and &amp; require typing and are generally difficult to read in the
markup. In such cases, CDATA section can be used. By using CDATA section, you are commanding the parser that
the particular section of the document contains no markup and should be treated as regular text.

Syntax
Following is the syntax for CDATA section −

<![CDATA[
characters with markup
]]>

The above syntax is composed of three sections −

CDATA Start section − CDATA begins with the nine-character delimiter <![CDATA[

CDATA End section − CDATA section ends with ]]> delimiter.

CData section − Characters between these two enclosures are interpreted as characters, and not as
markup. This section may contain markup characters <, >, and & , but they are ignored by the XML
processor.

Example

The following markup code shows an example of CDATA. Here, each character written inside the CDATA section
is ignored by the parser.

<script>
<![CDATA[
<message> Welcome to TutorialsPoint </message>
]] >
</script >

In the above syntax, everything between <message> and </message> is treated as character data and not as
markup.

CDATA Rules
The given rules are required to be followed for XML CDATA −

https://www.tutorialspoint.com/cgi-bin/printpage.cgi 15/32
3/11/2019 XML Quick Guide

CDATA cannot contain the string "]]>" anywhere in the XML document.
Nesting is not allowed in CDATA section.

XML - WHITESPACES
In this chapter, we will discuss whitespace handling in XML documents. Whitespace is a collection of spaces,
tabs, and newlines. They are generally used to make a document more readable.

XML document contains two types of whitespaces - Significant Whitespace and Insignificant Whitespace. Both
are explained below with examples.

Significant Whitespace
A significant Whitespace occurs within the element which contains text and markup present together. For
example −

<name>TanmayPatil</name>

and

<name>Tanmay Patil</name>

The above two elements are different because of the space between Tanmay and Patil. Any program reading this
element in an XML file is obliged to maintain the distinction.

Insignificant Whitespace
Insignificant whitespace means the space where only element content is allowed. For example −

<address.category = "residence">

or
<address....category = "..residence">

The above examples are same. Here, the space is represented by dots .. In the above example, the space between
address and category is insignificant.

A special attribute named xml:space may be attached to an element. This indicates that whitespace should not
be removed for that element by the application. You can set this attribute to default or preserve as shown in the
following example −

<!ATTLIST address xml:space (default|preserve) 'preserve'>

Where,

The value default signals that the default whitespace processing modes of an application are acceptable for
this element.

The value preserve indicates the application to preserve all the whitespaces.

https://www.tutorialspoint.com/cgi-bin/printpage.cgi 16/32
3/11/2019 XML Quick Guide

XML - PROCESSING
This chapter describes the Processing Instructions P I s. As defined by the XML 1.0 Recommendation,

"Processing instructions P I s allow documents to contain instructions for applications. PIs are
not part of the character data of the document, but MUST be passed through to the application.

Processing instructions P I s can be used to pass information to applications. PIs can appear anywhere in the
document outside the markup. They can appear in the prolog, including the document type definition DT D, in
textual content, or after the document.

Syntax
Following is the syntax of PI −

<?target instructions?>

Where

target − Identifies the application to which the instruction is directed.

instruction − A character that describes the information for the application to process.

A PI starts with a special tag <? and ends with ?>. Processing of the contents ends immediately after the string ?>
is encountered.

Example

PIs are rarely used. They are mostly used to link XML document to a style sheet. Following is an example −

<?xml-stylesheet href = "tutorialspointstyle.css" type = "text/css"?>

Here, the target is xml-stylesheet. href="tutorialspointstyle.css" and type="text/css" are data or instructions the
target application will use at the time of processing the given XML document.

In this case, a browser recognizes the target by indicating that the XML should be transformed before being
shown; the first attribute states that the type of the transform is XSL and the second attribute points to its
location.

Processing Instructions Rules

A PI can contain any data except the combination ?>, which is interpreted as the closing delimiter. Here are two
examples of valid PIs −

<?welcome to pg = 10 of tutorials point?>

<?welcome?>

XML - ENCODING

https://www.tutorialspoint.com/cgi-bin/printpage.cgi 17/32
3/11/2019 XML Quick Guide

Encoding is the process of converting unicode characters into their equivalent binary representation. When the
XML processor reads an XML document, it encodes the document depending on the type of encoding. Hence, we
need to specify the type of encoding in the XML declaration.

Encoding Types
There are mainly two types of encoding −

UTF-8
UTF-16

UTF stands for UCS Transformation Format, and UCS itself means Universal Character Set. The number 8 or 16
refers to the number of bits used to represent a character. They are either 8onebyte or 16twobytes. For the
documents without encoding information, UTF-8 is set by default.

Syntax
Encoding type is included in the prolog section of the XML document. The syntax for UTF-8 encoding is as
follows −

<?xml version = "1.0" encoding = "UTF-8" standalone = "no" ?>

The syntax for UTF-16 encoding is as follows −

<?xml version = "1.0" encoding = "UTF-16" standalone = "no" ?>

Example

Following example shows the declaration of encoding −

<?xml version = "1.0" encoding = "UTF-8" standalone = "no" ?>

<contact-info>
<name>Tanmay Patil</name>
<company>TutorialsPoint</company>
<phone>(011) 123-4567</phone>
</contact-info>

In the above example encoding="UTF-8", specifies that 8-bits are used to represent the characters. To
represent 16-bit characters, UTF-16 encoding can be used.

The XML files encoded with UTF-8 tend to be smaller in size than those encoded with UTF-16 format.

XML - VALIDATION
Validation is a process by which an XML document is validated. An XML document is said to be valid if its
contents match with the elements, attributes and associated document type declarationDT D, and if the document
complies with the constraints expressed in it. Validation is dealt in two ways by the XML parser. They are −

Well-formed XML document

Valid XML document

https://www.tutorialspoint.com/cgi-bin/printpage.cgi 18/32
3/11/2019 XML Quick Guide

Well-formed XML Document

An XML document is said to be well-formed if it adheres to the following rules −

Non DTD XML files must use the predefined character entities for amp & , apossinglequote, gt>, lt<,
quotdoublequote .

It must follow the ordering of the tag. i.e., the inner tag must be closed before closing the outer tag.

Each of its opening tags must have a closing tag or it must be a self ending tag.
< title >. . . . < /title > or < title/ > .

It must have only one attribute in a start tag, which needs to be quoted.

amp & , apossinglequote, gt>, lt<, quotdoublequote entities other than these must be declared.

Example
Following is an example of a well-formed XML document −

<?xml version = "1.0" encoding = "UTF-8" standalone = "yes" ?>

<!DOCTYPE address
[
<!ELEMENT address (name,company,phone)>
<!ELEMENT name (#PCDATA)>
<!ELEMENT company (#PCDATA)>
<!ELEMENT phone (#PCDATA)>
]>

<address>
<name>Tanmay Patil</name>
<company>TutorialsPoint</company>
<phone>(011) 123-4567</phone>
</address>

The above example is said to be well-formed as −

It defines the type of document. Here, the document type is element type.

It includes a root element named as address.

Each of the child elements among name, company and phone is enclosed in its self explanatory tag.

Order of the tags is maintained.

Valid XML Document

If an XML document is well-formed and has an associated Document Type Declaration DT D, then it is said to be
a valid XML document. We will study more about DTD in the chapter XML - DTDs.

XML - DTDS
The XML Document Type Declaration, commonly known as DTD, is a way to describe XML language precisely.
DTDs check vocabulary and validity of the structure of XML documents against grammatical rules of appropriate

https://www.tutorialspoint.com/cgi-bin/printpage.cgi 19/32
3/11/2019 XML Quick Guide

XML language.

An XML DTD can be either specified inside the document, or it can be kept in a separate document and then liked
separately.

Syntax
Basic syntax of a DTD is as follows −

<!DOCTYPE element DTD identifier

[
declaration1
declaration2
........
]>

In the above syntax,

The DTD starts with <!DOCTYPE delimiter.

An element tells the parser to parse the document from the specified root element.

DTD identifier is an identifier for the document type definition, which may be the path to a file on the
system or URL to a file on the internet. If the DTD is pointing to external path, it is called External
Subset.

The square brackets [ ] enclose an optional list of entity declarations called Internal Subset.

Internal DTD
A DTD is referred to as an internal DTD if elements are declared within the XML files. To refer it as internal DTD,
standalone attribute in XML declaration must be set to yes. This means, the declaration works independent of an
external source.

Syntax

Following is the syntax of internal DTD −

<!DOCTYPE root-element [element-declarations]>

where root-element is the name of root element and element-declarations is where you declare the elements.

Example

Following is a simple example of internal DTD −

<?xml version = "1.0" encoding = "UTF-8" standalone = "yes" ?>

<!DOCTYPE address [
<!ELEMENT address (name,company,phone)>
<!ELEMENT name (#PCDATA)>
<!ELEMENT company (#PCDATA)>
<!ELEMENT phone (#PCDATA)>
]>

https://www.tutorialspoint.com/cgi-bin/printpage.cgi 20/32
3/11/2019 XML Quick Guide

<address>
<name>Tanmay Patil</name>
<company>TutorialsPoint</company>
<phone>(011) 123-4567</phone>
</address>

Let us go through the above code −

Start Declaration − Begin the XML declaration with the following statement.

<?xml version = "1.0" encoding = "UTF-8" standalone = "yes" ?>

DTD − Immediately after the XML header, the document type declaration follows, commonly referred to as the
DOCTYPE −

<!DOCTYPE address [

The DOCTYPE declaration has an exclamation mark ! at the start of the element name. The DOCTYPE informs
the parser that a DTD is associated with this XML document.

DTD Body − The DOCTYPE declaration is followed by body of the DTD, where you declare elements, attributes,
entities, and notations.

<!ELEMENT address (name,company,phone)>

<!ELEMENT name (#PCDATA)>
<!ELEMENT company (#PCDATA)>
<!ELEMENT phone_no (#PCDATA)>

Several elements are declared here that make up the vocabulary of the <name> document. <!ELEMENT name
#PCDATA > defines the element name to be of type "#PCDATA". Here #PCDATA means parse-able text data.

End Declaration − Finally, the declaration section of the DTD is closed using a closing bracket and a closing
angle bracket (]>). This effectively ends the definition, and thereafter, the XML document follows immediately.

Rules

The document type declaration must appear at the start of the document precededonlybytheXM Lheader −
it is not permitted anywhere else within the document.

Similar to the DOCTYPE declaration, the element declarations must start with an exclamation mark.

The Name in the document type declaration must match the element type of the root element.

External DTD
In external DTD elements are declared outside the XML file. They are accessed by specifying the system attributes
which may be either the legal .dtd file or a valid URL. To refer it as external DTD, standalone attribute in the XML
declaration must be set as no. This means, declaration includes information from the external source.

Syntax

https://www.tutorialspoint.com/cgi-bin/printpage.cgi 21/32
3/11/2019 XML Quick Guide

Following is the syntax for external DTD −

<!DOCTYPE root-element SYSTEM "file-name">

where file-name is the file with .dtd extension.

Example

The following example shows external DTD usage −

<?xml version = "1.0" encoding = "UTF-8" standalone = "no" ?>

<!DOCTYPE address SYSTEM "address.dtd">
<address>
<name>Tanmay Patil</name>
<company>TutorialsPoint</company>
<phone>(011) 123-4567</phone>
</address>

The content of the DTD file address.dtd is as shown −

<!ELEMENT address (name,company,phone)>

<!ELEMENT name (#PCDATA)>
<!ELEMENT company (#PCDATA)>
<!ELEMENT phone (#PCDATA)>

Types
You can refer to an external DTD by using either system identifiers or public identifiers.

System Identifiers

A system identifier enables you to specify the location of an external file containing DTD declarations. Syntax is as
follows −

<!DOCTYPE name SYSTEM "address.dtd" [...]>

As you can see, it contains keyword SYSTEM and a URI reference pointing to the location of the document.

Public Identifiers

Public identifiers provide a mechanism to locate DTD resources and is written as follows −

<!DOCTYPE name PUBLIC "-//Beginning XML//DTD Address Example//EN">

As you can see, it begins with keyword PUBLIC, followed by a specialized identifier. Public identifiers are used to
identify an entry in a catalog. Public identifiers can follow any format, however, a commonly used format is called
Formal Public Identifiers, or FPIs.

XML - SCHEMAS

https://www.tutorialspoint.com/cgi-bin/printpage.cgi 22/32
3/11/2019 XML Quick Guide

XML Schema is commonly known as XML Schema Definition XS D. It is used to describe and validate the
structure and the content of XML data. XML schema defines the elements, attributes and data types. Schema
element supports Namespaces. It is similar to a database schema that describes the data in a database.

Syntax
You need to declare a schema in your XML document as follows −

Example

The following example shows how to use schema −

<?xml version = "1.0" encoding = "UTF-8"?>

<xs:schema xmlns:xs = "http://www.w3.org/2001/XMLSchema">
<xs:element name = "contact">
<xs:complexType>
<xs:sequence>
<xs:element name = "name" type = "xs:string" />
<xs:element name = "company" type = "xs:string" />
<xs:element name = "phone" type = "xs:int" />
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:schema>

The basic idea behind XML Schemas is that they describe the legitimate format that an XML document can take.

Elements
As we saw in the XML - Elements chapter, elements are the building blocks of XML document. An element can be
defined within an XSD as follows −

<xs:element name = "x" type = "y"/>

Definition Types
You can define XML schema elements in the following ways −

Simple Type

Simple type element is used only in the context of the text. Some of the predefined simple types are: xs:integer,
xs:boolean, xs:string, xs:date. For example −

<xs:element name = "phone_number" type = "xs:int" />

Complex Type

A complex type is a container for other element definitions. This allows you to specify which child elements an
element can contain and to provide some structure within your XML documents. For example −

<xs:element name = "Address">

<xs:complexType>

https://www.tutorialspoint.com/cgi-bin/printpage.cgi 23/32
3/11/2019 XML Quick Guide

<xs:sequence>
<xs:element name = "name" type = "xs:string" />
<xs:element name = "company" type = "xs:string" />
<xs:element name = "phone" type = "xs:int" />
</xs:sequence>
</xs:complexType>
</xs:element>

In the above example, Address element consists of child elements. This is a container for other <xs:element>
definitions, that allows to build a simple hierarchy of elements in the XML document.

Global Types

With the global type, you can define a single type in your document, which can be used by all other references. For
example, suppose you want to generalize the person and company for different addresses of the company. In such
case, you can define a general type as follows −

<xs:element name = "AddressType">

<xs:complexType>
<xs:sequence>
<xs:element name = "name" type = "xs:string" />
<xs:element name = "company" type = "xs:string" />
</xs:sequence>
</xs:complexType>
</xs:element>

Now let us use this type in our example as follows −

<xs:element name = "Address1">

<xs:complexType>
<xs:sequence>
<xs:element name = "address" type = "AddressType" />
<xs:element name = "phone1" type = "xs:int" />
</xs:sequence>
</xs:complexType>
</xs:element>

<xs:element name = "Address2">

<xs:complexType>
<xs:sequence>
<xs:element name = "address" type = "AddressType" />
<xs:element name = "phone2" type = "xs:int" />
</xs:sequence>
</xs:complexType>
</xs:element>

Instead of having to define the name and the company twice (once for Address1 and once for Address2), we now
have a single definition. This makes maintenance simpler, i.e., if you decide to add "Postcode" elements to the
address, you need to add them at just one place.

Attributes
Attributes in XSD provide extra information within an element. Attributes have name and type property as shown
below −

https://www.tutorialspoint.com/cgi-bin/printpage.cgi 24/32
3/11/2019 XML Quick Guide

<xs:attribute name = "x" type = "y"/>

XML - TREE STRUCTURE

An XML document is always descriptive. The tree structure is often referred to as XML Tree and plays an
important role to describe any XML document easily.

The tree structure contains root parent elements, child elements and so on. By using tree structure, you can get to
know all succeeding branches and sub-branches starting from the root. The parsing starts at the root, then moves
down the first branch to an element, take the first branch from there, and so on to the leaf nodes.

Example
Following example demonstrates simple XML tree structure −

<?xml version = "1.0"?>

<Company>
<Employee>
<FirstName>Tanmay</FirstName>
<LastName>Patil</LastName>
<ContactNo>1234567890</ContactNo>
<Email>[email protected]</Email>
<Address>
<City>Bangalore</City>
<State>Karnataka</State>
<Zip>560212</Zip>
</Address>
</Employee>
</Company>

Following tree structure represents the above XML document −

In the above diagram, there is a root element named as <company>. Inside that, there is one more element
<Employee>. Inside the employee element, there are five branches named <FirstName>, <LastName>,

https://www.tutorialspoint.com/cgi-bin/printpage.cgi 25/32
3/11/2019 XML Quick Guide

<ContactNo>, <Email>, and <Address>. Inside the <Address> element, there are three sub-branches, named
<City> <State> and <Zip>.

XML - DOM
The Document Object Model DOM is the foundation of XML. XML documents have a hierarchy of
informational units called nodes; DOM is a way of describing those nodes and the relationships between them.

A DOM document is a collection of nodes or pieces of information organized in a hierarchy. This hierarchy allows
a developer to navigate through the tree looking for specific information. Because it is based on a hierarchy of
information, the DOM is said to be tree based.

The XML DOM, on the other hand, also provides an API that allows a developer to add, edit, move, or remove
nodes in the tree at any point in order to create an application.

Example
The following example sample. htm parses an XML document " address. xml " into an XML DOM object and
then extracts some information from it with JavaScript −

<!DOCTYPE html>
<html>
<body>
<h1>TutorialsPoint DOM example </h1>
<div>
<b>Name:</b> <span id = "name"></span><br>
<b>Company:</b> <span id = "company"></span><br>
<b>Phone:</b> <span id = "phone"></span>
</div>
<script>
if (window.XMLHttpRequest)
{// code for IE7+, Firefox, Chrome, Opera, Safari
xmlhttp = new XMLHttpRequest();
}
else
{// code for IE6, IE5
xmlhttp = new ActiveXObject("Microsoft.XMLHTTP");
}
xmlhttp.open("GET","/xml/address.xml",false);
xmlhttp.send();
xmlDoc = xmlhttp.responseXML;

document.getElementById("name").innerHTML=
xmlDoc.getElementsByTagName("name")[0].childNodes[0].nodeValue;
document.getElementById("company").innerHTML=
xmlDoc.getElementsByTagName("company")[0].childNodes[0].nodeValue;
document.getElementById("phone").innerHTML=
xmlDoc.getElementsByTagName("phone")[0].childNodes[0].nodeValue;
</script>
</body>
</html>

Contents of address.xml are as follows −

https://www.tutorialspoint.com/cgi-bin/printpage.cgi 26/32
3/11/2019 XML Quick Guide

<?xml version = "1.0"?>

<contact-info>
<name>Tanmay Patil</name>
<company>TutorialsPoint</company>
<phone>(011) 123-4567</phone>
</contact-info>

Now let us keep these two files sample.htm and address.xml in the same directory /xml and execute the
sample.htm file by opening it in any browser. This should produce the following output.

Here, you can see how each of the child nodes is extracted to display their values.

XML - NAMESPACES
A Namespace is a set of unique names. Namespace is a mechanisms by which element and attribute name can
be assigned to a group. The Namespace is identified by URIU nif ormResourceI dentif iers.

Namespace Declaration
A Namespace is declared using reserved attributes. Such an attribute name must either be xmlns or begin with
xmlns: shown as below −

<element xmlns:name = "URL">

Syntax
The Namespace starts with the keyword xmlns.

The word name is the Namespace prefix.

The URL is the Namespace identifier.

Example
Namespace affects only a limited area in the document. An element containing the declaration and all of its
descendants are in the scope of the Namespace. Following is a simple example of XML Namespace −

<?xml version = "1.0" encoding = "UTF-8"?>

<cont:contact xmlns:cont = "www.tutorialspoint.com/profile">
<cont:name>Tanmay Patil</cont:name>
<cont:company>TutorialsPoint</cont:company>
<cont:phone>(011) 123-4567</cont:phone>
</cont:contact>

https://www.tutorialspoint.com/cgi-bin/printpage.cgi 27/32
3/11/2019 XML Quick Guide

Here, the Namespace prefix is cont, and the Namespace identifier U RI as www.tutorialspoint.com/profile. This
means, the element names and attribute names with the cont prefix includingthecontactelement, all belong to
the www.tutorialspoint.com/profile namespace.

XML - DATABASES
XML Database is used to store huge amount of information in the XML format. As the use of XML is increasing
in every field, it is required to have a secured place to store the XML documents. The data stored in the database
can be queried using XQuery, serialized, and exported into a desired format.

XML Database Types

There are two major types of XML databases −

XML- enabled
Native XML N XD

XML - Enabled Database

XML enabled database is nothing but the extension provided for the conversion of XML document. This is a
relational database, where data is stored in tables consisting of rows and columns. The tables contain set of
records, which in turn consist of fields.

Native XML Database

Native XML database is based on the container rather than table format. It can store large amount of XML
document and data. Native XML database is queried by the XPath-expressions.

Native XML database has an advantage over the XML-enabled database. It is highly capable to store, query and
maintain the XML document than XML-enabled database.

Example

Following example demonstrates XML database −

<?xml version = "1.0"?>

<contact-info>
<contact1>
<name>Tanmay Patil</name>
<company>TutorialsPoint</company>
<phone>(011) 123-4567</phone>
</contact1>

<contact2>
<name>Manisha Patil</name>
<company>TutorialsPoint</company>
<phone>(011) 789-4567</phone>
</contact2>
</contact-info>

https://www.tutorialspoint.com/cgi-bin/printpage.cgi 28/32
3/11/2019 XML Quick Guide

Here, a table of contacts is created that holds the records of contacts contact1andcontact2, which in turn consists
of three entities − name, company and phone.

XML - VIEWERS
This chapter describes THE various methods to view an XML document. An XML document can be viewed
using a simple text editor or any browser. Most of the major browsers supports XML. XML files can be opened in
the browser by just double-clicking the XML document if itisalocalf ile or by typing the URL path in the address
bar if thef ileislocatedontheserver, in the same way as we open other files in the browser. XML files are saved
with a ".xml" extension.

Let us explore various methods by which we can view an XML file. Following example sample. xml is used to view
all the sections of this chapter.

<?xml version = "1.0"?>

<contact-info>
<name>Tanmay Patil</name>
<company>TutorialsPoint</company>
<phone>(011) 123-4567</phone>
</contact-info>

Text Editors
Any simple text editor such as Notepad, TextPad, or TextEdit can be used to create or view an XML document as
shown below −

Firefox Browser

https://www.tutorialspoint.com/cgi-bin/printpage.cgi 29/32
3/11/2019 XML Quick Guide

Open the above XML code in Chrome by double-clicking the file. The XML code displays coding with color, which
makes the code readable. It shows plus+ or minus − sign at the left side in the XML element. When we click the
minus sign − , the code hides. When we click the plus + sign, the code lines get expanded. The output in Firefox is
as shown below −

Chrome Browser
Open the above XML code in Chrome browser. The code gets displayed as shown below −

Errors in XML Document

If your XML code has some tags missing, then a message is displayed in the browser. Let us try to open the
following XML file in Chrome −

<?xml version = "1.0"?>

<contact-info>
<name>Tanmay Patil</name>
<company>TutorialsPoint</company>
<phone>(011) 123-4567</phone>
</contact-info>

In the above code, the start and end tags are not matching ref erthecontact i nf otag , hence an error message is
displayed by the browser as shown below −

XML - EDITORS

https://www.tutorialspoint.com/cgi-bin/printpage.cgi 30/32
3/11/2019 XML Quick Guide

XML Editor is a markup language editor. The XML documents can be edited or created using existing editors
such as Notepad, WordPad, or any similar text editor. You can also find a professional XML editor online or for
downloading, which has more powerful editing features such as −

It automatically closes the tags that are left open.

It strictly checks syntax.
It highlights XML syntax with colour for increased readability.
It helps you write a valid XML code.
It provides automatic verification of XML documents against DTDs and Schemas.

Open Source XML Editors

Following are some open source XML editors −

Online XML Editor − This is a light weight XML editor which you can use online.

Xerlin − Xerlin is an open source XML editor for Java 2 platform released under an Apache license. It is a
Java based XML modelling application, for creating and editing XML files easily.

CAM - Content Assembly Mechanism − CAM XML Editor tool comes with XML+JSON+SQL Open-XDX
sponsored by Oracle.

XML - PARSERS
XML parser is a software library or a package that provides interface for client applications to work with XML
documents. It checks for proper format of the XML document and may also validate the XML documents. Modern
day browsers have built-in XML parsers.

Following diagram shows how XML parser interacts with XML document −

The goal of a parser is to transform XML into a readable code.

To ease the process of parsing, some commercial products are available that facilitate the breakdown of XML
document and yield more reliable results.

Some commonly used parsers are listed below −

MSXML M icrosof tC oreXM LS ervices − This is a standard set of XML tools from Microsoft that
includes a parser.

https://www.tutorialspoint.com/cgi-bin/printpage.cgi 31/32
3/11/2019 XML Quick Guide

System.Xml.XmlDocument − This class is part of .NET library, which contains a number of different
classes related to working with XML.

Java built-in parser − The Java library has its own parser. The library is designed such that you can
replace the built-in parser with an external implementation such as Xerces from Apache or Saxon.

Saxon − Saxon offers tools for parsing, transforming, and querying XML.

Xerces − Xerces is implemented in Java and is developed by the famous open source Apache Software
Foundation.

XML - PROCESSORS
When a software program reads an XML document and takes actions accordingly, this is called processing the
XML. Any program that can read and process XML documents is known as an XML processor. An XML processor
reads the XML file and turns it into in-memory structures that the rest of the program can access.

The most fundamental XML processor reads an XML document and converts it into an internal representation for
other programs or subroutines to use. This is called a parser, and it is an important component of every XML
processing program.

Processor involves processing the instructions, that can be studied in the chapter Processing Instruction.

Types
XML processors are classified as validating or non-validating types, depending on whether or not they check
XML documents for validity. A processor that discovers a validity error must be able to report it, but may
continue with normal processing.

A few validating parsers are − xml4c I BM , inC + + , xml4j I BM , inJ ava , MSXML M icrosof t, inJ ava ,
TclXML T C L, xmlproc P ython, XML::Parser P erl, Java Project X S un, inJ ava .

A few non-validating parsers are − OpenXML J ava, Lark J ava, xp J ava, AElfred J ava, expat C , XParse
J avaS cript , xmllib P ython .

https://www.tutorialspoint.com/cgi-bin/printpage.cgi 32/32