1 /* USER CODE BEGIN Header */

2 /**
3 ******************************************************************************
4 * @file : main.c
5 * @brief : Main program body
6 ******************************************************************************
7 * @attention
8 *
9 * Copyright (c) 2024 STMicroelectronics.
10 * All rights reserved.
11 *
12 * This software is licensed under terms that can be found in the LICENSE file
13 * in the root directory of this software component.
14 * If no LICENSE file comes with this software, it is provided AS-IS.
15 *
16 ******************************************************************************
17 */
18 /* USER CODE END Header */
19 /* Includes ------------------------------------------------------------------*/
20 #include "main.h"
21
22 /* Private includes ----------------------------------------------------------*/
23 /* USER CODE BEGIN Includes */
24
25 /* USER CODE END Includes */
26
27 /* Private typedef -----------------------------------------------------------*/
28 /* USER CODE BEGIN PTD */
29
30 /* USER CODE END PTD */
31
32 /* Private define ------------------------------------------------------------*/
33 /* USER CODE BEGIN PD */
34
35 /* USER CODE END PD */
36
37 /* Private macro -------------------------------------------------------------*/
38 /* USER CODE BEGIN PM */
39
40 /* USER CODE END PM */
41
42 /* Private variables ---------------------------------------------------------*/
43
44 /* USER CODE BEGIN PV */
45
46 /* USER CODE END PV */
47
48 /* Private function prototypes -----------------------------------------------*/
49 void SystemClock_Config(void);
50 void PeriphCommonClock_Config(void);
51 static void MX_GPIO_Init(void);
52 /* USER CODE BEGIN PFP */
53
54 /* USER CODE END PFP */
55
56 /* Private user code ---------------------------------------------------------*/
57 /* USER CODE BEGIN 0 */
58
59 /* USER CODE END 0 */
60
61 /**
62 * @brief The application entry point.
63 * @retval int
64 */
65 int main(void)
66 {
67 /* USER CODE BEGIN 1 */
68
69 /* USER CODE END 1 */
70
71 /* MCU Configuration--------------------------------------------------------*/
72
73 /* Reset of all peripherals, Initializes the Flash interface and the Systick. */
 74 HAL_Init();
75
76 /* USER CODE BEGIN Init */
77
78 /* USER CODE END Init */
79
80 /* Configure the system clock */
81 SystemClock_Config();
82
83 /* Configure the peripherals common clocks */
84 PeriphCommonClock_Config();
85
86 /* USER CODE BEGIN SysInit */
87
88 /* USER CODE END SysInit */
89
90 /* Initialize all configured peripherals */
91 MX_GPIO_Init();
92 /* USER CODE BEGIN 2 */
93 int status=0;
94 /* USER CODE END 2 */
95
96 /* Infinite loop */
97 /* USER CODE BEGIN WHILE */
98 while (1)
99 {
100 /*HAL_GPIO_WritePin(GPIOB, LED1_Pin, GPIO_PIN_SET);
101 HAL_GPIO_WritePin(GPIOB, LED3_Pin, GPIO_PIN_RESET);
102 HAL_Delay(400);
103 HAL_GPIO_WritePin(GPIOB, LED1_Pin, GPIO_PIN_RESET);
104 HAL_GPIO_WritePin(GPIOB, LED3_Pin, GPIO_PIN_SET);
105 HAL_Delay(400);*/
106
107 if(!HAL_GPIO_ReadPin(GPIOC, SW1_Pin) && status==0)
108 {
109 HAL_GPIO_WritePin(GPIOB, LED2_Pin, GPIO_PIN_SET);
110 status=1;
111 }
112 else if(!HAL_GPIO_ReadPin(GPIOC, SW1_Pin) && status==1)
113 {
114
115 HAL_GPIO_WritePin(GPIOB, LED2_Pin, GPIO_PIN_RESET);
116 status=0;
117 }
118 HAL_Delay(200);
119 /* USER CODE END WHILE */
120
121 /* USER CODE BEGIN 3 */
122 }
123 /* USER CODE END 3 */
124 }
125
126 /**
127 * @brief System Clock Configuration
128 * @retval None
129 */
130 void SystemClock_Config(void)
131 {
132 RCC_OscInitTypeDef RCC_OscInitStruct = {0};
133 RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
134
135 /** Configure the main internal regulator output voltage
136 */
137 __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
138
139 /** Initializes the RCC Oscillators according to the specified parameters
140 * in the RCC_OscInitTypeDef structure.
141 */
142 RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI|RCC_OSCILLATORTYPE_MSI;
143 RCC_OscInitStruct.HSIState = RCC_HSI_ON;
144 RCC_OscInitStruct.MSIState = RCC_MSI_ON;
145 RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
146 RCC_OscInitStruct.MSICalibrationValue = RCC_MSICALIBRATION_DEFAULT;
147 RCC_OscInitStruct.MSIClockRange = RCC_MSIRANGE_6;
148 RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;
149 if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
150 {
151 Error_Handler();
152 }
153
154 /** Configure the SYSCLKSource, HCLK, PCLK1 and PCLK2 clocks dividers
155 */
156 RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK4|RCC_CLOCKTYPE_HCLK2
157 |RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
158 |RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
159 RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_MSI;
160 RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
161 RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;
162 RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
163 RCC_ClkInitStruct.AHBCLK2Divider = RCC_SYSCLK_DIV1;
164 RCC_ClkInitStruct.AHBCLK4Divider = RCC_SYSCLK_DIV1;
165
166 if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_0) != HAL_OK)
167 {
168 Error_Handler();
169 }
170 }
171
172 /**
173 * @brief Peripherals Common Clock Configuration
174 * @retval None
175 */
176 void PeriphCommonClock_Config(void)
177 {
178 RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0};
179
180 /** Initializes the peripherals clock
181 */
182 PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_SMPS;
183 PeriphClkInitStruct.SmpsClockSelection = RCC_SMPSCLKSOURCE_HSI;
184 PeriphClkInitStruct.SmpsDivSelection = RCC_SMPSCLKDIV_RANGE1;
185
186 if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK)
187 {
188 Error_Handler();
189 }
190 /* USER CODE BEGIN Smps */
191
192 /* USER CODE END Smps */
193 }
194
195 /**
196 * @brief GPIO Initialization Function
197 * @param None
198 * @retval None
199 */
200 static void MX_GPIO_Init(void)
201 {
202 GPIO_InitTypeDef GPIO_InitStruct = {0};
203 /* USER CODE BEGIN MX_GPIO_Init_1 */
204 /* USER CODE END MX_GPIO_Init_1 */
205
206 /* GPIO Ports Clock Enable */
207 __HAL_RCC_GPIOC_CLK_ENABLE();
208 __HAL_RCC_GPIOB_CLK_ENABLE();
209
210 /*Configure GPIO pin Output Level */
211 HAL_GPIO_WritePin(GPIOB, LED2_Pin|LED3_Pin|LED1_Pin, GPIO_PIN_RESET);
212
213 /*Configure GPIO pin : SW1_Pin */
214 GPIO_InitStruct.Pin = SW1_Pin;
215 GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
216 GPIO_InitStruct.Pull = GPIO_PULLUP;
217 HAL_GPIO_Init(SW1_GPIO_Port, &GPIO_InitStruct);
218
219 /*Configure GPIO pins : LED2_Pin LED3_Pin LED1_Pin */
220 GPIO_InitStruct.Pin = LED2_Pin|LED3_Pin|LED1_Pin;
221 GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
222 GPIO_InitStruct.Pull = GPIO_NOPULL;
223 GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
224 HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
225
226 /* USER CODE BEGIN MX_GPIO_Init_2 */
227 /* USER CODE END MX_GPIO_Init_2 */
228 }
229
230 /* USER CODE BEGIN 4 */
231
232 /* USER CODE END 4 */
233
234 /**
235 * @brief This function is executed in case of error occurrence.
236 * @retval None
237 */
238 void Error_Handler(void)
239 {
240 /* USER CODE BEGIN Error_Handler_Debug */
241 /* User can add his own implementation to report the HAL error return state */
242 __disable_irq();
243 while (1)
244 {
245 }
246 /* USER CODE END Error_Handler_Debug */
247 }
248
249 #ifdef USE_FULL_ASSERT
250 /**
251 * @brief Reports the name of the source file and the source line number
252 * where the assert_param error has occurred.
253 * @param file: pointer to the source file name
254 * @param line: assert_param error line source number
255 * @retval None
256 */
257 void assert_failed(uint8_t *file, uint32_t line)
258 {
259 /* USER CODE BEGIN 6 */
260 /* User can add his own implementation to report the file name and line number,
261 ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
262 /* USER CODE END 6 */
263 }
264 #endif /* USE_FULL_ASSERT */
265