0% found this document useful (0 votes)
85 views23 pages

8 DZ 82 XQT 9 Ehb 39 ZM 0 Qkdvxluv 7 Wuus 0 D

The document outlines the scope and content of an Olympiad test in engineering and technologies. It describes the skills and competencies required of winners, including analytical, project-oriented, and research skills in areas like mechanics, engineering graphics, mechanics of deformable solids, fluid and gas mechanics, automatic control theory, and electrical engineering. Recommended references in Russian and English are provided for each section of the test.

Uploaded by

Saad Ali khan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
85 views23 pages

8 DZ 82 XQT 9 Ehb 39 ZM 0 Qkdvxluv 7 Wuus 0 D

The document outlines the scope and content of an Olympiad test in engineering and technologies. It describes the skills and competencies required of winners, including analytical, project-oriented, and research skills in areas like mechanics, engineering graphics, mechanics of deformable solids, fluid and gas mechanics, automatic control theory, and electrical engineering. Recommended references in Russian and English are provided for each section of the test.

Uploaded by

Saad Ali khan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 23

ПРОГРАММА ПРОФИЛЯ

PROGRAM: ENGINEERING & TECHNOLOGIES


This document outlines the scope of themes, which may be included in the Olympiad tests. The
themes are grouped by areas and are followed by the list of recommended references in the Russian
and English languages.

Olympiad winner’s skill set by subject


The winner of the Olympiad in the field of Engineering and Technologies must have the following
competencies and skills.

Analytical competencies and skills


1. Analysis of mechanical systems. The ability to understand the nature of the movement of a
mechanical system by its appearance, and the nature of the loading of a structure according to
its drawing.
2. Analysis of electrical circuits. Understanding the structure of an electrical circuit from its
image.
3. Reading drawings. The ability to understand the appearance of a part by looking at its drawing.
4. Analyzing system stability. To own methods of analyzing the system stability and dynamics
performance.
Project-oriented competencies and skills
1. Execution of drawings. Ability to draw parts and assembly drawings of varying complexity.
2. Synthesis of automatic control systems. To own methods of synthesis of automatic control
systems.
Research competencies and skills
1. Calculation of mechanical systems. The ability to calculate the parameters of movement of
material points and parts of mechanisms, as well as loads in static structures.
2. Calculation of electrical circuits. Ability to calculate the parameters of electrical circuits and
electronic devices.
3. Transformation of control systems models. To be able to perform the analysis of mathematical
models of control systems.

Content
Section 1. Theoretical mechanics
1. The equilibrium of a mechanical system.
2. Kinematics of a point; translational and rotational motion of a rigid body.
3. Velocity and acceleration at points of a rigid body and with complex motion.
4. Differential equations of motion of a material point.
5. General theorems of the dynamics of a material point and a mechanical system,
applications to the dynamics of a rigid body.

Section 2. Engineering graphics and basics of designing


1. Basic terms of engineering graphics. Coordinate system. Projections. Views. Sectional
views. Sections. Unwrap.
2. Drawings. Lines of drawings. Different types of lines.
3. Mechanical engineering drawing. Classification of nodes and parts in mechanical
engineering drawing.
4. Joints of parts. Detachable joints. Non-detachable joints.
5. Development of drawings. Designations on the drawings. Projections. Sectional views.
Sections.

1
ПРОГРАММА ПРОФИЛЯ

6. Basics of digital manufacturing. Programming of CNC machines. G-CODE language.


Technology commands. Tool positioning commands.

Section 3. Mechanics of a deformable solid body


1. Tensor of the second rank. Symmetric and antisymmetric tensors of the second rank.
Principal axes and principal components of a symmetric tensor of the second rank.
Invariants.
2. Displacements and deformations. Tensor of small deformations.
3. Stressed state. Stress tensor. Differential equilibrium equation.
4. Theory of elasticity. Hooke's law. Statement of the problem in the theory of elasticity. Flat
tasks.
5. Thermodynamics of continuous media. The energy of elastic deformation. Generalized
Hooke's law.
6. Elements of resistance of materials. Bending and twisting of rods. Statistically determined
and statically indeterminate rod systems. Theorem of Castigliano.
7. Elements of the theory of viscoelasticity. Linear creep. Elementary models (Maxwell
body, Voigt body, standard body).
8. Elements of the theory of plasticity. Ideal ductility and ductility with hardening.
Deformation theory, theory of plastic flow. Associated law of plastic flow. The von Mises
principle (the principle of maximum dissipation).
9. Elements of the theory of destruction. Stress concentration. Griffith's theory of brittle
fracture.

Section 4. Fluid and Gas Mechanics


1. Analysis of dimensions. Basic and derived units of measurement. Systems of units of
measurement. Class of systems of units of measurement. Dimensionality of a physical
quantity. Dependent and independent dimensions. P-theorem. Solution of problems with the
help of the P-theorem.
2 Theory of motion of an ideal fluid. Kinematics of liquid medium. Basic equations of the
ideal fluid. Hydrostatics. Flat vortex-free steady-state flows of an ideal incompressible fluid.
Vortex motions of an ideal fluid.
3.Theory of viscous fluid motion. Basic equations of motion of viscous fluid. Exact solutions
of the equations of motion of viscous fluid. Approximate solutions of the equations of motion
of viscous fluid in the case of small and large Reynolds numbers.
4.Theory of motion of compressible fluid. Riemann invariants. Method of characteristics.
Hydraulic jumps. Theory of shallow water.

Section 5. Automatic Control Theory


1. Differential equations, transfer functions and frequency response functions of linear
continuous systems
2. Performance measures of linear system dynamics in time-, frequency- and root domains
3. Equivalent transformations of linear system block diagrams
4. Mathematical models of dynamic systems in the form of state variables
5. Routh-Hurwitz stability criterion (or Hurwitz stability criterion)
6. Nyquist stability criterion
7. State feedback system design: Modal control (pole assignment)
8. System state reconstruction using state observers

2
ПРОГРАММА ПРОФИЛЯ

9. Equilibrium states of linear and nonlinear systems. Lyapunov's first and second methods
in motion stability analysis
10. PID Controllers. Linear regulator control.
11. Optimal control problem formulation. The Bellman principle. The Pontryagin’s
maximum principle.

Section 6. Electrical Engineering


1. Calculation of resistive R-circuits
2. Transient processes in linear circuits
3. Steady-state sinusoidal mode
4. Three-phase circuits.

Section 7. Electronics
1. The main active components of electronics (diodes, transistors and operational
amplifiers).
2. Principles of construction of electronic devices (on the example of designing simple
devices).
3. Information signal generation devices (sensors, sensors).
4. Signal processing (amplifiers, converters).
5. Components and display devices (indicators, displays).

Recommended literature

Section 1. Theoretical mechanics


Sources Topic
1. Hand L.N.; Finch J.D. (). Analytical Mechanics. 4. Differential equations of motion of
Cambridge University Press, 1998. 576 p. a material point.
5. General theorems of the dynamics
https://www.amazon.com/Analytical-Mechanics-Louis- of a material point and a mechanical
N-Hand/dp/0521575729 system, applications to the dynamics
of a rigid body.
Access regime: limited
2. Kibble T. W.; Berkshire, F. H. (2004). Classical 4. Differential equations of motion of
Mechanics. 5th edition Imperial College Press. 2011. 478 a material point.
p. 5. General theorems of the dynamics
of a material point and a mechanical
https://www.amazon.com/Classical-Mechanics-5th-Tom- system, applications to the dynamics
Kibble/dp/1860944353 of a rigid body.

Access regime: limited


3. McLean W.G., et al. Engineering Mechanics, Statics 1. Equilibrium of a rigid body under
and Dynamics, McGrawHill (1962). the conditions of a convergent, flat or
spatial system of forces; friction.
2. Kinematics of a point; translational
https://archive.org/details/schaumsoutlineof0000mcle
and rotational motion of a rigid body.

Access regime: limited

3
ПРОГРАММА ПРОФИЛЯ

3. Velocity and acceleration at points


of a rigid body and with complex
motion.
4. Differential equations of motion of
a material point.
4. Nimal Rajapakse, et al. Engineering Mechanics 1: 1. Equilibrium of a rigid body under
Statics, Springer Berlin Heidelberg. 2009. 296 p. the conditions of a convergent, flat or
https://link.springer.com/book/10.1007/978-3-540- spatial system of forces; friction.
89937-2
Access regime: limited
5. Polyakhov N.N., Yushkov M.P., Zegzhda S.A. Rational 1.Equilibrium of a rigid body under
and Applied Mechanics, Springer Cham. 2021. 520p the conditions of a convergent, flat or
spatial system of forces; friction.
https://link.springer.com/book/10.1007/978-3-030- 2.Kinematics of a point; translational
64061-3 and rotational motion of a rigid body.
3.Velocity and acceleration at points
Access regime: limited of a rigid body and with complex
motion.
4.Differential equations of motion of a
material point.
6. Бать М.И и др. Теоретическая механика в примерах 1. Equilibrium of a rigid body under
и задачах. Учеб. пособ. для вузов. В 2-х т./М.И.Бать, the conditions of a convergent, flat or
Г.Ю.Джанелидзе, А.С. Кельзон.-9-е изд., перераб. - spatial system of forces; friction.
М.: Наука, 2007.-670 с.
2. Kinematics of a point; translational
https://lib-bkm.ru/load/114-1-0-2981 and rotational motion of a rigid body.
3. Velocity and acceleration at points
Access regime: free of a rigid body and with complex
motion.
4. Differential equations of motion of
a material point.
5. General theorems of the dynamics
of a material point and a mechanical
system, applications to the dynamics
of a rigid body.
7. Бутенин Н.В. и др. Курс теоретической механики: 1. Equilibrium of a rigid body under
Учеб.пособие для студ-ов вузов по техн. спец.:В 2-х the conditions of a convergent, flat or
т./ Н.В.Бутенин, Я.Л.Лунц, Д.Р.Меркин. СПб.:Лань.- spatial system of forces; friction.
5-е изд., испр. 2008.-729 с.
2. Kinematics of a point; translational
https://lib-bkm.ru/14968 and rotational motion of a rigid body.
3. Velocity and acceleration at points
Access regime: free of a rigid body and with complex
motion.

4
ПРОГРАММА ПРОФИЛЯ

4. Differential equations of motion of


a material point.
5. General theorems of the dynamics
of a material point and a mechanical
system, applications to the dynamics
of a rigid body.
8. Гантмахер Ф.Р. Лекции по аналитической 1. Equilibrium of a rigid body under
механике. Изд. 3е. М.: ФИЗМАТЛИТ, 2001, 264 с. the conditions of a convergent, flat or
spatial system of forces; friction.
https://e.lanbook.com/book/47536
4. Differential equations of motion of
Access regime: free a material point.
5. General theorems of the dynamics
of a material point and a mechanical
system, applications to the dynamics
of a rigid body.
9. Маркеев А.П. Теоретическая механика. Учебник 1. Equilibrium of a rigid body under
для университетов. Москва: ЧеРо, 1999. 572 с. the conditions of a convergent, flat or
spatial system of forces; friction.
https://coollib.com/b/525460-a-p-markeev-
2. Kinematics of a point; translational
teoreticheskaya-mehanika-uchebnik-dlya-universitetov
and rotational motion of a rigid body.
Access regime: free 3. Velocity and acceleration at points
of a rigid body and with complex
motion.
4. Differential equations of motion of
a material point.
5. General theorems of the dynamics
of a material point and a mechanical
system, applications to the dynamics
of a rigid body.
10. Мещерский И.В. Задачи по теоретической 1. Equilibrium of a rigid body under
механике: Учеб. пособие для студ. вузов, обуч.по the conditions of a convergent, flat or
техн. спец./И.В.Мещерский; Под spatial system of forces; friction.
ред.В.А.Пальмова,Д.Д.Меркина.-45-е изд., стер.-
2. Kinematics of a point; translational
СПб. и др.: Лань, 2009.-447 с. 2.
and rotational motion of a rigid body.
https://lib-bkm.ru/load/114-1-0-3053 3. Velocity and acceleration at points
of a rigid body and with complex
Access regime: free motion.
4. Differential equations of motion of
a material point.
5. General theorems of the dynamics
of a material point and a mechanical
system, applications to the dynamics
of a rigid body.

5
ПРОГРАММА ПРОФИЛЯ

11. Пятницкий Е.С., Трухан Н.М., Ханукаев Ю.И., 1. Equilibrium of a rigid body under
Яковенко Г.Н., Сборник задач по аналитической the conditions of a convergent, flat or
механике, Учебное пособие для ВУЗов, 3-е изд., spatial system of forces; friction.
перераб. и доп., М. ФИЗМАТЛИТ, 2002, 400с.
2. Kinematics of a point; translational
https://chembaby.ru/materialy/piatnitskii-e-s-trukhan-n- and rotational motion of a rigid body.
m-khanukaev-iu-i-iakovenko-g-n-sbornik-zadach-po- 3. Velocity and acceleration at points
analiticheskoi-mekhanike of a rigid body and with complex
motion.
Access regime: free 4. Differential equations of motion of
a material point.
5. General theorems of the dynamics
of a material point and a mechanical
system, applications to the dynamics
of a rigid body.
12. Тарг С.М. Краткий курс теоретической механики: 1. Equilibrium of a rigid body under
Учеб. для втузов/С.М.Тарг.-12-е изд., стер. - М.: the conditions of a convergent, flat or
Высш. шк., 2010.-415 с. spatial system of forces; friction.
2. Kinematics of a point; translational
http://mechanicsrgsu.narod.ru/Targ.pdf
and rotational motion of a rigid body.
Access regime: free 3. Velocity and acceleration at points
of a rigid body and with complex
motion.
4. Differential equations of motion of
a material point.
5. General theorems of the dynamics
of a material point and a mechanical
system, applications to the dynamics
of a rigid body.
13. Яблонский А.А., В.М.Никифорова Курс 1. Equilibrium of a rigid body under
теоретической механики. В 2х частях. (Часть I. the conditions of a convergent, flat or
Статика. Кинематика., Часть II Динамика). spatial system of forces; friction.
Учеб.пособие для вузов: 3-е изд., исправл. - М.:
2. Kinematics of a point; translational
Высшая школа, 1966.
and rotational motion of a rigid body.
https://dwg.ru/dnl/7904 3. Velocity and acceleration at points
of a rigid body and with complex
Access regime: free motion.
4. Differential equations of motion of
a material point.
5. General theorems of the dynamics
of a material point and a mechanical
system, applications to the dynamics
of a rigid body.

6
ПРОГРАММА ПРОФИЛЯ

Section 2. Engineering graphics and basics of designing


Sources Topic
1. G & M Code REFERENCE MANUAL 6. Basics of digital manufacturing.
https://machmotion.com/downloads/GCode/Mach4-G- Programming of CNC machines. G-
and-M-Code-Reference-Manual.pdf CODE language. Technology
Access regime: free
commands. Tool positioning
commands.
2. S.P. Burkova, G.F.Vinokurova, R.G. Dolotova. 1. Basic terms of engineering graphics.
Engineering Graphics. Coordinate system. Projections. Views.
Textbook. – Tomsk: TPU Press, 2014, 174 pp. Sectional views. Sections. Unwrap.
https://portal.tpu.ru/SHARED/d/DOLOTOVA/in_st/archi
2. Drawings. Lines of drawings. Using
v_1/1.pdf
Access regime: free different types of lines.
4. Joints of parts. Detachable joints.
Non-detachable joints.
5.Development of drawings.
Designations on the drawings.
Projections. Sectional views. Sections.
3. Большаков В.П. Создание трехмерных моделей и 1. Basic terms of engineering graphics.
конструкторской документации в системе КОМПАС- Coordinate system. Projections. Views.
3D. Практикум. — СПб.: БХВ-Петербург, 2010. — 496 Sectional views. Sections. Unwrap.
с.: ил. + DVD — (Учебное пособие) 2. Drawings. Lines of drawings. Using
https://bhv.ru/product/sozdanie-trehmernyh-modelej-i- different types of lines.
konstruktorskoj-dokumentatsii-v-sisteme-kompas-3d-
praktikum/
Access regime: limited
4. Виноградов В.Н., Василенко Е.А., Альхименок А.А. 1. Basic terms of engineering graphics.
и др. Словарь-справочник по черчению : книга для Coordinate system. Projections. Views.
учащихся. — М.: Просвещение, 1993. — 159 с. Sectional views. Sections. Unwrap.
https://www.studmed.ru/vinogradov-v-n-vasilenko-e-a-
2. Drawings. Lines of drawings. Using
alhimenok-a-a-i-dr-slovar-spravochnik-po-
chercheniyu_5954cc862e5.html different types of lines.
Access regime: free 3. Mechanical engineering drawing.
Classification of nodes and parts in
mechanical engineering drawing.
4. Joints of parts. Detachable joints.
Non-detachable joints.
5.Development of drawings.
Designations on the drawings.
Projections. Sectional views. Sections.
5. Инженерная и компьютерная графика: электрон. 1. Basic terms of engineering graphics.
учеб. - метод. пособие к практ. занятиям и самост. Coordinate system. Projections. Views.
работе студентов/ Р. А. Сакаев, Ю. В. Павлова, Б. М. Sectional views. Sections. Unwrap.
Перлов, А. И. Лысков — СПб. : Изд-во СПбГЭТУ 2. Drawings. Lines of drawings. Using
"ЛЭТИ", 2017. different types of lines.

7
ПРОГРАММА ПРОФИЛЯ

http://library.etu.ru/jirbis2/index.php?option=com_irbis&
view=irbis&Itemid=108&task=set_static_req&bl_id_strin
g=1&req_irb=%3c.%3eI=%D0%96%2011/%D0%9B88-
352808%3c.%3e
Access regime: limited
6. Машиностроительное черчение, Справочник, 3. Mechanical engineering drawing.
Попова Г.Н., Алексеев С.Ю., 2011 Classification of nodes and parts in
https://obuchalka.org/20180613101094/mashinostroitelno mechanical engineering drawing.
e-cherchenie-spravochnik-popova-g-n-alekseev-s-u- 4. Joints of parts. Detachable joints.
2011.html Non-detachable joints.
Access regime: free
7. Фролов С. А. Начертательная геометрия: учебник 3. Mechanical engineering drawing.
для ВТУЗов. – 2-е изд. – М.: Машиностроение, 1983. - Classification of nodes and parts in
240 с., ил. mechanical engineering drawing.
https://obuchalka.org/2017082195873/nachertatelnaya- 4. Joints of parts. Detachable joints.
geometriya-frolov-s-a-2010.html Non-detachable joints.
Access regime: free

Section 3. Mechanics of a deformable solid body


Sources Topic
1. Fridtjov Irgen, Continuum Mechanics, Springer, 2008, 1. Tensor of the second rank.
661 p. Symmetric and antisymmetric tensors
of the second rank. Principal axes and
principal components of a symmetric
https://link.springer.com/book/10.1007/978-3-540-74298-
tensor of the second rank. Invariants.
2?utm_medium=referral&utm_source=google_books&ut 2. Displacements and
m_campaign=3_pier05_buy_print&utm_content=en_080 deformations. Tensor of small
82017 deformations.
3. Stressed state. Stress tensor.
Access regime: free Differential equilibrium equation.
2. Teodor M. Atanackovic, Ardeshir Guran, Theory of 4. Theory of elasticity. Hooke's
law. Statement of the problem in the
Elasticity for Scientists and Engineers. Birkhauaser, 2000,
theory of elasticity. Flat tasks.
374 p. 5. Thermodynamics of continuous
media. The energy of elastic
https://link.springer.com/book/10.1007/978-1-4612-1330- deformation. Generalized Hooke's law.
7?utm_medium=referral&utm_source=google_books&ut 6. Elements of resistance of
m_campaign=3_pier05_buy_print&utm_content=en_080 materials. Bending and twisting of
rods. Statistically determined and
82017
statically indeterminate rod systems.
Theorem of Castigliano.
Access regime: limited 7. Elements of the theory of
3. Theory and Problems of Continuum Mechanics / George viscoelasticity. Linear creep.
E. Mase. 229 p. Elementary models (Maxwell body,
Voigt body, standard body).

8
ПРОГРАММА ПРОФИЛЯ

https://dokumen.tips/documents/mase-theory-and- 8. Elements of the theory of


problems-of-continuum-mechanicspdf.html?page=218 plasticity. Ideal ductility and ductility
with hardening. Deformation theory,
theory of plastic flow. Associated law
Access regime: free
of plastic flow. The von Mises
4. Извеков О.Я. Элементы механики деформируемого principle (the principle of maximum
твердого тела. - М.: МФТИ, 2019. - 248 с. dissipation).

http://books.mipt.ru/book/301238

Access regime: free


5. Мейз, Дж. Теория и задачи механики сплошных сред
пер. с англ. Е. И. Свешниковой ; под ред. и с предисл.
М. Э. Эглит - Москва: МИР, 1974. - 318 с

https://www.c-o-k.ru/library/document/12357

Access regime: free


6. Работнов Ю.Н. Механика деформируемого твердого 1. Tensor of the second rank.
тела М.: Наука, 1988. – 712 с. Symmetric and antisymmetric tensors
of the second rank. Principal axes and
principal components of a symmetric
https://studizba.com/files/show/djvu/2605-2-yu-n-
tensor of the second rank. Invariants.
rabotnov--mehanika-deformiruemogo.html 2. Displacements and deformations.
Tensor of small deformations.
Access regime: free 3. Stressed state. Stress tensor.
Differential equilibrium equation.
4. Theory of elasticity. Hooke's law.
Statement of the problem in the theory
of elasticity. Flat tasks.
5. Thermodynamics of continuous
media. The energy of elastic
deformation. Generalized Hooke's law.
6. Elements of resistance of materials.
Bending and twisting of rods.
Statistically determined and statically
indeterminate rod systems. Theorem of
Castigliano.
7. Elements of the theory of
viscoelasticity. Linear creep.
Elementary models (Maxwell body,
Voigt body, standard body).
8. Elements of the theory of plasticity.
Ideal ductility and ductility with
hardening. Deformation theory, theory
of plastic flow. Associated law of
plastic flow. The von Mises principle

9
ПРОГРАММА ПРОФИЛЯ

(the principle of maximum


dissipation).
9. Elements of the theory of
destruction. Stress concentration.
Griffith's theory of brittle fracture.
7. Рыжак Е.И. Бескординатное исчисление для 1. Tensor of the second rank.
механики сплошных сред. - М.: МФТИ, 2011. Symmetric and antisymmetric tensors
of the second rank. Principal axes and
principal components of a symmetric
https://www.researchgate.net/publication/295852176_BE
tensor of the second rank. Invariants.
SKOORDINATNOE_TENZORNOE_ISCISLENIE_DL
A_MEHANIKI_SPLOSNYH_SRED

Access regime: free


8. Феодосьев В.И. Сопротивление материалов: 6. Elements of resistance of materials.
Учебник для студ-ов высш.техн.учеб.зав. – 10-е изд., Bending and twisting of rods.
перераб. и доп. – М.: Изд-во МГТУ им. Н.Э. Баумана, Statistically determined and statically
indeterminate rod systems. Theorem of
1999. – 592 с.
Castigliano.

https://pnu.edu.ru/media/filer_public/2013/04/10/2-
12_fedosev_sopromat_1999.pdf

Access regime: free

Section 4. Fluid and Gas Mechanics


Sources Topic
1. G.I. Barenblatt, Dimensional Analysis, CRC Press, 1987 1. Analysis of dimensions
.135 p

https://books.google.co.uz/books?id=gHFQWEvTWBg
C

Access regime: limited


2. Т.E. Faber. Fluid dynamics for physicists. Cambridge 1.Analysis of dimensions
university press, 1995. 440 p. 2.Theory of motion of an ideal fluid
3.Theory of viscous fluid motion
https://www.cambridge.org/core/search?q=Т.E.Faber.+F
luid+dynamics+for+physicists.

Access regime: limited

3. G.B. Whitham F.R.S. Linear and nonlinear waves., 4. Theory of motion of compressible
Jown Wiley&Sons, New York London, Sydney Toronto, fluid
1974. 636 p.

10
ПРОГРАММА ПРОФИЛЯ

https://eclass.uoa.gr/modules/document/file.php/PHYS2
89/Βιβλία/Whitham_Linear_and_Nonlinear_Waves.pdf

Access regime: free


4. Г.И.Баренблатт. Анализ размерностей. М.1987, 168 1. Analysis of dimensions
с.

https://studizba.com/files/show/djvu/2986-1-g-i-
barenblatt--analiz-razmernostey.html

Access regime: free


5. С. В. Валландер. Лекции по гидроаэромеханике С.- 2.Theory of motion of an ideal fluid
Петерб. гос. ун-т .— 2-е изд. — СПб. : Изд-во С.-
Петерб. ун-та, 2005 . 304 с.

http://www.booksshare.net/books/physics/vallander-
sv/1978/files/lexciipoaerogidromehanike1978.pdf?ysclid
=lku2w1q7oc190818616

Access regime: free


6. Н. Е. Кочин, И. А. Кибель, Н. В. Розе ; под ред. И. 2. Theory of motion of an ideal fluid
А. Кибеля .— 6-е изд., испр. и доп. — Теоретическая
гидромеханика : 2 ч. Ч.1: учеб. пособие для вузов М :
Физматгиз, 1963 .— 583

https://studizba.com/files/gidrogazodinamika-
ggd/book/218683-n.e.-kochin-i.a.-kibel-n.v.-roze.html

Access regime: free


7. Н. Е. Кочин, И. А. Кибель, Н. В. Розе; под ред. И. 3. Theory of viscous fluid motion
А. Кибеля .— 4-е изд., перараб. и доп. Теоретическая
гидромеханика: 2 ч. Ч. 2 : учеб. пособие для вузов, М
: Физматлит, 1963 . 727 с.

https://studizba.com/files/gidrogazodinamika-
ggd/book/218684-n.e.-kochin-i.a.-kibel-n.v.-roze.

Access regime: free


8. Дж. Уизем ; пер. с англ. В. В. Жаринова ; под ред. 4.Theory of motion of compressible
А. Б. Шабата . Линейные и нелинейные волны. М. : fluid.
Мир, 1977 .— 622 с.

https://studizba.com/files/show/djvu/2719-1-dzh-uizem--
lineynye-i-nelineynye-volny.html

Access regime: free

Section 5. Automatic Control Theory

11
ПРОГРАММА ПРОФИЛЯ

Source Topics
1. Donald, E. Optimal control theory: an introduction. 11. Optimal control problem
DOVER PUBNS, 2016. formulation. Bellman principle.
Pontryagin maximum principle.
https://www.amazon.com/Optimal-Control-Theory-
Introduction-Engineering/dp/0486434842

Access regime: limited


2. Dorf R. C., Bishop R. H. Modern Control Systems. 1.Differential equations, transfer
10th edition. L.: Pearson Prentice Hall, 2005. functions and frequency response
functions of linear continuous systems
https://powerunit-ju.com/wp-
2.Performance measures of linear
content/uploads/2016/11/Book-
Modern_Control_Systems_11th_Edition.pdf system dynamics in time-, frequency-
and root domains
Access regime: free 4.Mathematical models of dynamic
systems in the form of state variables
5.Routh-Hurwitz stability criterion (or
Hurwitz stability criterion)
6.Nyquist stability criterion
3. Gantmacher, Felix (1959), Theory of matrices, AMS 5.Routh-Hurwitz stability criterion (or
Chelsea publishing Hurwitz stability criterion)

https://www.maths.ed.ac.uk/~v1ranick/papers/gantmacher
1.pdf

Access regime: free


4. Hägglund T. Automatic Control. Lecture Notes. Lund, 7.State feedback system design: Modal
2019. control (pole assignment)

https://www.control.lth.se/fileadmin/control/Education/En
gineeringProgram/FRTF05/engforel.pdf

Access regime: free


5. Khalil H. K. Nonlinear Systems. 3rd Edition. N. J.: 9.Equilibrium states of linear and
Prentice Hall, 2002. nonlinear systems. Lyapunov's first and
second methods in motion stability
https://www.lirmm.fr/~chemori/Temp/Ines/Khalil_Nonline
analysis
ar_Systems.pdf

Access regime: free


6. Kwakernaak H., Sivan R. Linear Optimal Control 8.System state reconstruction using
Systems. N. Y.: Wiley, 1972. state observers

https://yandex.ru/search/?text=kwakernaak+sivan&lr=2&c
lid=2296048&win=375&src=suggest_T

12
ПРОГРАММА ПРОФИЛЯ

Access regime: free


7. Modern Control. Engineering. Fifth Edition (2010). 1. Differential equations, transfer
Katsuhiko Ogata. Prentice Hall. Boston Columbus functions and frequency response
Indianapolis New York San Francisco Upper Saddle functions of linear continuous systems
River.
2. Performance measures of linear
http://docs.znu.ac.ir/members/pirmohamadi_ali/Control/K system dynamics in time-, frequency-
atsuhiko%20Ogata%20_%20Modern%20Control%20Engi and root domains
neering%205th%20Edition.pdf 3. Equivalent transformations of linear
system block diagrams
Access regime: free 4. Mathematical models of dynamic
systems in the form of state variables
5. Routh-Hurwitz stability criterion (or
Hurwitz stability criterion)
6. Nyquist stability criterion
7. State feedback system design: Modal
control (pole assignment)
8. System state reconstruction using
state observers’ analysis
10. PID Controllers. Linear regulator
control.
8. Slotine Lectures on Nonlinear Systems 5. Routh-Hurwitz stability criterion (or
Hurwitz stability criterion)
https://web.mit.edu/nsl/www/videos/lectures.html 9. Equilibrium states of linear and
nonlinear systems. Lyapunov's first and
Access regime: free
second methods in motion stability
analysis
9. Wonham W. M. On Pole Assignment in Multivariable 7. State feedback system design: Modal
Linear Systems // IEEE Trans. on Automatic Control, control (pole assignment)
Dec.1968, pp. 747–748.

https://www.researchgate.net/publication/3025444_On_pol
e_assignment_in_multivariable_linear_systems/link/5488c
9fa0cf268d28f08ff49/download

Access regime: free


10. Бесекерский В. А., Попов Е. П. Теория систем 1. Differential equations, transfer
автоматического управления. М.: Профессия, 2003. functions and frequency response
functions of linear continuous systems
https://studizba.com/files/show/pdf/3931-1-besekerskiy-v-
2. Performance measures of linear
a-popov-e-p--teoriya.html
system dynamics in time-, frequency-
and root domains
Access regime: free
3. Equivalent transformations of linear
system block diagrams

13
ПРОГРАММА ПРОФИЛЯ

5. Routh-Hurwitz stability criterion (or


Hurwitz stability criterion)
6. Nyquist stability criterion
11. Бороденко В. А. Сборник задач по теории 7. State feedback system design: Modal
автоматического управления. Павлодар: Кереку, 2009. control (pole assignment)
8. System state reconstruction using
http://knigainformatika.com/rule/Borodenko_zadania_TA state observers
U.pdf

Access regime: free


12. Гантмахер Ф. Р. Теория 5. Routh-Hurwitz stability criterion (or
матриц. — М.: Наука, 1967. Hurwitz stability criterion)

http://mathscinet.ru/files/Gantmaher.pdf

Access regime: free


13. Дорф Р., Бишоп Р. Современные системы 1. Differential equations, transfer
управления. М.: Лаборатория Базовых Знаний, 2014. functions and frequency response
functions of linear continuous systems
http://centrlit.com/Market/Book/Index/5149
2. Performance measures of linear
Access regime: limited system dynamics in time-, frequency-
and root domains
4. Mathematical models of dynamic
systems in the form of state variables
5. Routh-Hurwitz stability criterion (or
Hurwitz stability criterion)
6. Nyquist stability criterion
14. Квакернаак Х., Сиван Р. Линейные оптимальные 8. System state reconstruction using
системы управления. М.: Мир, 1977. state observers

https://www.studmed.ru/kvakernaak-h-sivan-r-lineynye-
optimalnye-sistemy-upravleniya_a4588c1364c.html

Access regime: free


15. Ким Д. П., Дмитриева Н. Д. Сборник задач по 1.Differential equations, transfer
теории автоматического управления. Линейные functions and frequency response
системы. М.: ФИЗМАТЛИТ, 2007. functions of linear continuous systems
3. Equivalent transformations of linear
https://www.litres.ru/book/nikterne-dmitrieva-8/sbornik-
zadach-po-teorii-avtomaticheskogo-upravleniya- system block diagrams
16957671/ 5. Routh-Hurwitz stability criterion (or
Hurwitz stability criterion)
Access regime: limited
16. Кузовков Н. Т. Модальное управление и 4. Mathematical models of dynamic
наблюдающие устройства. М.: Машиностроение, 1976. systems in the form of state variables

14
ПРОГРАММА ПРОФИЛЯ

https://www.studmed.ru/kuzovkov-nt-modalnoe- 7.State feedback system design: Modal


upravlenie-i-nablyudayuschie- control (pole assignment)
ustroystva_ab682bb12fd.html 8.System state reconstruction using
state observers
Access regime: free
17. Мирошник И . В. Теория автоматического 9. Equilibrium states of linear and
управления. Линейные системы. СПб.: Питер, 2006. nonlinear systems. Lyapunov's first and
second methods in motion stability
https://www.studmed.ru/view/miroshnik-iv-teoriya-
analysis
avtomaticheskogo-upravleniya-lineynye-
sistemy_ac833bdfa9f.html

Access regime: free


18. Поляк Б.Т., Хлебников М.В., Рапопорт Л.Б. 1. Differential equations, transfer
Математическая теория автоматического управления: functions and frequency response
учебное пособие. М.: ЛЕНАНД, 2019. 500 с functions of linear continuous systems
2. Performance measures of linear
https://urss.ru/cgi- system dynamics in time-, frequency-
bin/db.pl?lang=Ru&blang=ru&page=Book&id=249750 and root domains
3. Equivalent transformations of linear
Access regime: limited system block diagrams
4. Mathematical models of dynamic
systems in the form of state variables
5. Routh-Hurwitz stability criterion (or
Hurwitz stability criterion)
6. Nyquist stability criterion
7. State feedback system design:
Modal control (pole assignment)
8. System state reconstruction using
state observers
9. Equilibrium states of linear and
nonlinear systems. Lyapunov's first
and second methods in motion
stability analysis
10. PID Controllers. Linear regulator
control.
11. Optimal control problem
formulation. The Bellman principle.
The Pontryagin’s maximum principle.
19. Сю Д., Мейер А. Современная теория 4. Mathematical models of dynamic
автоматического управления и ее применение. М.: systems in the form of state variables
Машиностроение, 1972. 9. Equilibrium states of linear and
nonlinear systems. Lyapunov's first and
https://www.studmed.ru/syu-d-meyer-a-sovremennaya-
teoriya-avtomaticheskogo-upravleniya-i-ee- second methods in motion stability
primenenie_c02398a1ac9.html analysis

Access regime: free

15
ПРОГРАММА ПРОФИЛЯ

20. Филлипс Ч., Харбор Р. Системы управления с 1. Differential equations, transfer


обратной связью. М.: Лаборатория Базовых Знаний, functions and frequency response
2001. functions of linear continuous systems
2. Performance measures of linear
https://www.studmed.ru/fillips-ch-harbor-r-sistemy-
upravleniya-s-obratnoy-svyazyu_8ae801e5eb2.html system dynamics in time-, frequency-
and root domains
Access regime: free 4. Mathematical models of dynamic
systems in the form of state variables
5. Routh-Hurwitz stability criterion (or
Hurwitz stability criterion)
6. Nyquist stability criterion
21. Халил Х. К. Нелинейные системы. 3-е изд. М.– 9. Equilibrium states of linear and
Ижевск: НИЦ «Регулярная и хаотическая динамика», nonlinear systems. Lyapunov's first and
Институт компьютерных исследований, 2009. second methods in motion stability
analysis
https://ru.ug1lib.org/book/2524855/134f6a

Access regime: free

Section 6. Electrical Engineering


Sources Topic
1. Charles K. Alexander, Matthew N.O. Sadiku 1. Calculation of resistive R-circuits
Fundamentals of Electric Circuits. 5th edition. — 2. Transient processes in linear circuits
McGraw-Hill, 2012. 992 p. 3. Steady sinusoidal mode
4. Three-phase circuits
https://lms.su.edu.pk/lesson/1793/fundamentals-of-
electric-circuits-5th-edition-charles-k-alexander-matthew-
n-o-sadiku

Access regime: free


2. Nilsson J.W., Riedel S. Electric Circuits. Peanon 1. Calculation of resistive R-circuits
Prentice Hall, 2008. 855 p. 2. Transient processes in linear circuits
3. Steady sinusoidal mode
https://mohamadramdhani.staff.telkomuniversity.ac.id/fil
es/2016/08/James_W._Nilsson_Susan_Riedel_Electric_C
ircuits_RL-2015Book4You.pdf

Access regime: free


3. Rizzoni Giorgio. Fundamentals of Electrical 1. Calculation of resistive R-circuits
Engineering. New York: McGraw-Hill Education, 2009. 2. Transient processes in linear circuits
736 p. 3. Steady sinusoidal mode

16
ПРОГРАММА ПРОФИЛЯ

https://www.opentextbooks.org.hk/system/files/export/9/
9648/pdf/Fundamentals_of_Electrical_Engineering_I_96
48.pdf

Access regime: limited


4. Wadhwa C.L. Basic Electrical Engineering. New 3.Steady sinusoidal mode
Delhi, New Age International (P) Ltd., Publishers, 2007. 4.Three-phase circuits
422 p.

https://sciarium.com/file/180796/

Access regime: limited


5. Аполлонский С.М., Виноградов А.Л. 1. Calculation of resistive R-circuits
Теоретические основы электротехники. М.: 2. Transient processes in linear circuits
КНОРУС, 2016. 250 с. 3. Steady sinusoidal mode
4. Three-phase circuits
https://www.litres.ru/book/aleksandr-vinogradov-
5991645/teoreticheskie-osnovy-elektrotehniki-22984016/

Access regime: limited


6. Атабеков Г. И. Теоретические основы 2. Transient processes in linear circuits
электротехники. Линейные электрические цепи. 3. Steady sinusoidal mode
СПб.: Издательство «Лань», 2009. 592 с. 4. Three-phase circuits

http://eor.dgu.ru/lectures_f/ЛабТОЭгиперссылки/учебн
ики/26331_72f3adc944e19929b2ba15787d758c01.pdf

Access regime: free


7. Бакалов В.П., Дмитриков В.Ф., Крук Б.Е. Основы 1. Calculation of resistive R-circuits
теории цепей. М.: Радио и связь, 2000. 592 с. 3. Steady sinusoidal mode

http://mts.edu.27.ru/biblio/OTC/31325_bakalov_v_p_osn
ovy_teorii_cepey_3_e_izdanie(2).pdf

Access regime: free


8. Бессонов Л. А. Теоретические основы 1. Calculation of resistive R-circuits
электротехники. Электрические цепи. 3. Steady sinusoidal mode
М.: «Высшая школа», 1996. 638 с. 4. Three-phase circuits

http://publ.lib.ru/ARCHIVES/B/BESSONOV_Lev_Aleks
eevich/_Bessonov_L.A..html

Access regime: free

17
ПРОГРАММА ПРОФИЛЯ

9. Бычков Ю.А., Золотницкий В.М., Чернышев Э.П., 1. Calculation of resistive R-circuits


Белянин А.Н. Основы теоретической электротехники. 3. Steady sinusoidal mode
СПб.: Издательство «Лань», 2008. 592 с. 4. Three-phase circuits

http://group8209.ru/Books/TOE/Bychkov_uchebnik.pdf

Access regime: free


10. Демирчян К.С., Нейман Л.Р., Коровкин Н.В. 3.Steady sinusoidal mode
Теоретические основы электротехники. Том 1. – 4-е 4.Three-phase circuits
изд. СПб.: Питер, 2003. 463 с.

https://www.elec.ru/viewer?url=/files/2020/01/30/nejman
_teo_osn_eltex_t1.pdf

Access regime: free


11. Иванов И.И., Соловьев Г.И., Фролов В.Я. 1. Calculation of resistive R-circuits
Электротехника и основы электроники. СПб.: 2. Transient processes in linear circuits
Издательство «Лань», 2021. 736 с. 3. Steady sinusoidal mode
4. Three-phase circuits
https://www.rulit.me/data/programs/resources/pdf/Ivanov
_Elektrotehnika-i-osnovy-
elektroniki_RuLit_Me_689668.pdf

Access regime: free

Section 7. Electronics
Sources Topic
1. S.S. Bhatti, Rahul Malhotra. A Textbook of 2. Principles of construction of
Digital Electronics, nov, 2011. eBook - Amazon.com. electronic devices (on the example
of designing simple devices).
https://www.amazon.com/Textbook-Digital-Electronics- 3. Information signal generation
devices (sensors, sensors).
Bhatti-Malhotra-
4. Signal processing (amplifiers,
ebook/dp/B01IGUSY80/ref=sr_1_9?crid=1WAY1Q51Y converters).
5MS9&keywords=electronics+books&qid=1688757983
&s=books&sprefix=electronics%2Cstripbooks-intl-
ship%2C177&sr=1-9

Access regime: limited


2. Easy Electronics (Make: Handbook). by Charles 1. The main active components of
Platt. 2017. electronics (diodes, transistors and
operational amplifiers).
https://www.amazon.com/Make-Electronics-hands- 2. Principles of construction of
electronic devices (on the example
electronics- of designing simple devices).

18
ПРОГРАММА ПРОФИЛЯ

enthusiast/dp/1680456873/ref=sr_1_1?crid=1WAY1Q51 3. Information signal generation


Y5MS9&keywords=electronics+books&qid=169455993 devices (sensors, sensors).
4&s=books&sprefix=electronics%2Cstripbooks-intl- 4. Signal processing (amplifiers,
ship%2C177&sr=1-1 converters).

Access regime: limited


3. Martin Hartley Jones. A Practical Introduction to 1. The main active components of
Electronic Circuits. Cambridge University Press, 1995. electronics (diodes, transistors and
operational amplifiers).
https://books.google.ru/books?id=EEcemABAU44C&sit 2. Principles of construction of
electronic devices (on the example
esec=buy&hl=ru&source=gbs_atb of designing simple devices).
3. Information signal generation
Access regime: limited devices (sensors, sensors).
4. Signal processing (amplifiers,
converters).

4. READING SCHEMATICS 101: A step by step 1. The main active components of


guidebook on the basics of understanding how to read electronics (diodes, transistors and
schematics for beginners. 2023. operational amplifiers).
2. Principles of construction of
electronic devices (on the example
https://www.amazon.com/READING-SCHEMATICS- of designing simple devices).
step-step- 3. Information signal generation
understanding/dp/B0BVDJ35NZ/ref=sr_1_1?qid=16945 devices (sensors, sensors).
59795&refinements=p_27%3ACALVIN+BRENNAN&s
=books&sr=1-1&text=CALVIN+BRENNAN

Access regime: limited


5. Robert Erickson. Fundamentals of Power 1. The main active components of
Electronics. 3rd ed. 2020. electronics (diodes, transistors and
operational amplifiers).
https://www.amazon.com/Fundamentals-Power- 2. Principles of construction of
electronic devices (on the example
Electronics-Robert- of designing simple devices).
Erickson/dp/3030438791/ref=sr_1_14?crid=1WAY1Q51
Y5MS9&keywords=electronics+books&qid=168875798
3&s=books&sprefix=electronics%2Cstripbooks-intl-
ship%2C177&sr=1-14

Access regime: limited


6. Windell Oskay and Eric Schlaepfer. 2022. Open 1. The main active components of
Circuits: The Inner Beauty of Electronic Components. electronics (diodes, transistors and
operational amplifiers).

19
ПРОГРАММА ПРОФИЛЯ

https://www.amazon.com/Open-Circuits-Beauty- 2. Principles of construction of


Electronic- electronic devices (on the example
Components/dp/1718502346/ref=sr_1_2?crid=1WAY1Q of designing simple devices).
51Y5MS9&keywords=electronics+books&qid=1688763 3. Information signal generation
devices (sensors, sensors).
786&s=books&sprefix=electronics%2Cstripbooks-intl-
4. Signal processing (amplifiers,
ship%2C177&sr=1-2 converters).
5. Components and display devices
Access regime: limited (indicators, displays).

7. Артемов Р.Г. Электроника: конспект лекций. – 1. The main active components of


Омск: Изд-во Ом-ГТУ, 2010. – 88 с. electronics (diodes, transistors and
operational amplifiers).
https://www.studmed.ru/artemov-ad-elektronika- 2. Principles of construction of
electronic devices (on the example
konspekt-lekciy_4c1a2502a3a.html of designing simple devices).
3. Information signal generation
Access regime: free devices (sensors, sensors).
5. Components and display devices
(indicators, displays).

8. Джексон Р.Г. Новейшие датчики. – М. 5. Components and display devices


Техносфера. 2007. с. (indicators, displays).

https://djvu.online/file/NMpd8NDLxa6bC#p=1

Access regime: free


9. Джонс М.Х. Электроника – практический курс. 1. The main active components of
Перевод выполнен на кафедре радиотехники МФТИ. electronics (diodes, transistors and
– М.: Техносфера. 2006. – 512 с.ISBN 5-94836-086-5. operational amplifiers).
2. Principles of construction of
https://studizba.com/files/show/djvu/1973-1-m-h-dzhons- electronic devices (on the example
-elektronika-prakticheskiy.html of designing simple devices).
3. Information signal generation
devices (sensors, sensors).
4. Signal processing (amplifiers,
Access regime: free converters).

10. Манаев Е.И. Основы радиоэлектроники / Е.И. 1. The main active components of
Манаев. - М.: КД Либроком, 2019. - 512 c. electronics (diodes, transistors and
operational amplifiers).
https://www.elec.ru/files/2020/02/21/_Manaev_E.I.__Os 2. Principles of construction of
novue_radioyelektroniki.PDF electronic devices (on the example
of designing simple devices).
3. Information signal generation
Access regime: free devices (sensors, sensors).

20
ПРОГРАММА ПРОФИЛЯ

4. Signal processing (amplifiers,


converters).

11. Марченко А. Л. Основы электроники. Учебное 1. The main active components of


пособие для вузов / А. Л. Марченко. — М : ДМК Пресс, electronics (diodes, transistors and
2008. — 296 с. operational amplifiers).
2. Principles of construction of
electronic devices (on the example
https://rucont.ru/file.ashx?guid=f1f0d248-779b-466a- of designing simple devices).
a297-1ac04ab75a39 3. Information signal generation
devices (sensors, sensors).
Access regime: free 4. Signal processing (amplifiers,
converters).
5. Components and display devices
(indicators, displays).

12. Прянишников В.А. Электроника: полный курс 1. The main active components of
лекций. 4-е изд. - СПб: 2004. - 416 с., electronics (diodes, transistors and
operational amplifiers).
https://www.studmed.ru/pryanishnikov-va-elektronika- 2. Principles of construction of
electronic devices (on the example
polnyy-kurs-lekciy_a5e31f8251d.html of designing simple devices).
3. Information signal generation
Access regime: free devices (sensors, sensors).
4. Signal processing (amplifiers,
converters).
5. Components and display devices
(indicators, displays).

RECOMMENDED ONLINE COURSES

Section 1. Theoretical mechanics


1. Introduction to Engineering Mechanics (Coursera)
https://coursera.org/learn/engineering-mechanics-statics
2. Particle Dynamics (Coursera)
https://www.coursera.org/learn/particle-dynamics
3. Physics 101 - Rotational Motion and Gravitation (Coursera)
https://www.coursera.org/learn/physics-101-rotational-motion-gravitation
4. Rigid Body Dynamics (Coursera)
https://www.coursera.org/learn/rigid-body-dynamics

Section 2. Engineering graphics and basics of designing


1. How to Read Engineering Drawings – a Simple Guide (MakeUK)
https://www.makeuk.org/insights/blogs/how-to-read-engineering-drawings-a-simple-guide
2. Engineering Graphics/Drawing (MyGreatLearning)

21
ПРОГРАММА ПРОФИЛЯ

https://www.mygreatlearning.com/academy/learn-for-free/courses/engineering-graphics-
drawing
3. Engineering Graphics and Design (ClassCentral)
https://www.classcentral.com/course/swayam-engineering-graphics-and-design-43589
4. Nihar Ranjan Patra. Engineering Graphics. (ClassCentral)
https://www.classcentral.com/course/swayam-engineering-graphics-5305

Section 3. Mechanics of a deformable solid body


1. Strength of Materials (FreeVideoLectures)
https://freevideolectures.com/course/96/strength-of-materials
2. Strength of Materials (FreeVideoLectures)
https://freevideolectures.com/course/2361/strength-of-materials
3. Mechanics of Materials I: Fundamentals of Stress & Strain and Axial Loading (Coursera)
https://www.coursera.org/learn/mechanics-1
4. Mechanics of Materials III: Beam Bending (Coursera)
https://www.coursera.org/learn/beam-bending
5. Mechanics of Materials IV: Deflections, Buckling, Combined Loading & Failure Theories
(Coursera)
https://www.coursera.org/learn/materials-structures

Section 4. Fluid and Gas Mechanics


1. Механика сплошных сред: газодинамика, Жмур В. В., 06.09.2021г. - YouTube
https://www.youtube.com/watch?v=bt_CoRnkbFY
2. Механика сплошных сред | Видеолекции Физтеха: Лекторий МФТИ - видеолекции по
физике, математике, биологии, биоинформатике, информатике и другим дисциплинам
(lectoriy.ru)
3. https://mipt.lectoriy.ru/course/TheoreticalPhysics-ContinuumMechanics-14L
4. https://www.udemy.com/course/fluid-mechanics

Section 5. Automatic Control Theory


1. Classical Control Theory (Brian Douglas).
https://www.youtube.com/playlist?list=PLUMWjy5jgHK1NC52DXXrriwihVrYZKqjk
2. Principles of Automatic Control (MIT Open Corseware)
https://ocw.mit.edu/courses/16-06-principles-of-automatic-control-fall-2012/pages/lecture-
notes/
3. Control Systems. (ClassCentral)
https://www.classcentral.com/course/youtube-control-systems-48209/classroom

Section 6. Electrical Engineering


1. Circuits And Electronics (MIT Open Corseware)
https://ocw.mit.edu/courses/electrical-engineering-and-computer-science/6-002-circuits-and-
electronics-spring-2007/
2. Introduction to circuit analysis (Udemy)
https://www.udemy.com/course/full-course-circuit-analysis/
3. Circuits and Electronics 1: Basic Circuit Analysis (EdX)
https://www.edx.org/course/circuits-and-electronics-1-basic-circuit-analysi-2
4. Linear Circuits 2: AC Analysis (Coursera)
https://www.coursera.org/learn/linear-circuits-ac-analysis
5. Basic Electrical Circuits (ClassCentral)

22
ПРОГРАММА ПРОФИЛЯ

https://www.classcentral.com/course/swayam-basic-electrical-circuits-618

Section 7. Electronics
1. Введение в цифровую электронику.
https://www.intuit.ru/studies/courses/588/444/
2. Introduction to Electronics (Coursera)
https://www.coursera.org/learn/electronics
3. Semiconductor Physics (Coursera)
https://www.coursera.org/learn/semiconductor-physics.
4. Basic Electronics For Beginners (YouTube)
https://youtu.be/uXr4lXYjXuU
5. Beginner Electronics (YouTube)
https://youtube.com/playlist?list=PLah6faXAgguOeMUIxS22ZU4w5nDvCl5gs
6. Semiconductor Fundamentals (EdX)
https://www.edx.org/course/semiconductor-fundamentals

23

You might also like