Scribd
Upload
38 views

Installation Guide - Documentation 2023

1. Download assembly media archive files (.tar files) to a single folder and extract each file into the same folder, merging their contents. It is recommended to keep the download path short to avoid installation issues. 2. Extract the files using 7-Zip on Windows or the tar command on Linux. This will create a single subdirectory containing the extracted media files. 3. Verify the integrity of the extracted media using the DSYInsMediaCheck utility program located in the extracted files.

Uploaded by

leeapower
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
38 views

Installation Guide - Documentation 2023

1. Download assembly media archive files (.tar files) to a single folder and extract each file into the same folder, merging their contents. It is recommended to keep the download path short to avoid installation issues. 2. Extract the files using 7-Zip on Windows or the tar command on Linux. This will create a single subdirectory containing the extracted media files. 3. Verify the integrity of the extracted media using the DSYInsMediaCheck utility program located in the extracted files.

Uploaded by

leeapower
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

1/12/23, 10:34 AM Extracting the Assembly Media - 2022 - DSSIMULIA_Established

© 1995-2023 Dassault Systèmes. All rights reserved.

Extracting the Assembly Media

After you download the Assembly Media tape archive (.tar) files, you must
extract them into a common directory before starting the installation.

1. Download the media archive files to a single folder/directory in any location.

It is strongly recommended that you keep the length of this path reasonably short to avoid
problems. The extracted media may create fairly long subdirectory paths under this root
directory, and the combined depth may cause a product installer to fail. The combined path
should be no more than 60 characters deep.

This download location is different from the folder/directory where the products will be installed
(and may optionally be deleted once installation is complete). The media archive files may vary in
number; the file names are similar to the following:
xxx.AM_SIM_Abaqus_Extend.AllOS.1-4.tar
xxx.AM_SIM_Abaqus_Extend.AllOS.2-4.tar
xxx.AM_SIM_Abaqus_Extend.AllOS.3-4.tar
xxx.AM_SIM_Abaqus_Extend.AllOS.4-4.tar

2. Extract each of the .tar or .zip files into the same directory, merging (combining) their
contents.
It is easiest to extract the files into a subdirectory/folder of the current (download) directory. A
single subdirectory/folder will be created. In the instructions throughout this guide,
<download_dir> represents the full path to this extraction directory; for example, C:\download\ on
Windows or /tmp/download/ on Linux.

On Windows, it is recommended that you use the free 7-Zip utility (V4.57 or higher) which
handles .tar format. You can download 7-Zip from http://www.7-zip.org. On Linux you can use
GNU Tar version 1.15.1 or higher, which is included in most modern Linux distributions.

You can follow the detailed instructions below, if needed:


Windows platforms
a. In Windows Explorer, select all of the .tar or .zip files.

b. Right-click on the selected files and choose 7-Zip > Extract here.

This will extract all of the compressed files into the current folder. A single media
subfolder will be created.

Linux platforms

https://help.3ds.com/2022/English/DSSIMULIA_Established/EstiInstallMap/esti-t-downloadextract.htm?contextscope=all&id=43bfdb8139ec4730abb2efbeedae1b… 1/2
1/12/23, 10:34 AM Extracting the Assembly Media - 2022 - DSSIMULIA_Established

a. In a shell/terminal, change directory (cd) to the download directory and execute


the command tar -xf filename.tar on each of the files.

tar -xf filename.1-4.tar


tar -xf filename.2-4.tar
tar -xf filename.3-4.tar
tar -xf filename.4-4.tar

A single media subdirectory will be created.

3. Verify the integrity of the extracted media by using the DSYInsMediaCheck utility:

On Windows, execute the following file:


<download_dir>\media_name\1\0data\intel_a\DSYInsMediaCheck.exe

On Linux, execute the following file:


<download_dir>/media_name/1/0data/linux_a64/DSYInsMediaCheck

After you finish extracting the files, the extraction directory will look like this:

<download_dir>/media_name/1/
/2/
/3/
...
where media_name is the name of the software package, for example AM_SIM_Abaqus_Extend.AllOS.

https://help.3ds.com/2022/English/DSSIMULIA_Established/EstiInstallMap/esti-t-downloadextract.htm?contextscope=all&id=43bfdb8139ec4730abb2efbeedae1b… 2/2

You might also like