Scribd
Upload
20 views2 pages

FD70CMT Mspec

This document provides information on several monitor mounting options for aircraft. It describes: - A compact metal enclosure monitor that can be directly mounted to a bulkhead or cabinet wall in situations where space is limited. - Several arm mounting options that allow monitors to rotate and tilt for optimal viewing angles, and can be removed when not in use. - A ceiling mount with a narrow footprint that enables the monitor to be pushed up nearly flush with the ceiling.

Uploaded by

josue jetavionics
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
20 views2 pages

FD70CMT Mspec

This document provides information on several monitor mounting options for aircraft. It describes: - A compact metal enclosure monitor that can be directly mounted to a bulkhead or cabinet wall in situations where space is limited. - Several arm mounting options that allow monitors to rotate and tilt for optimal viewing angles, and can be removed when not in use. - A ceiling mount with a narrow footprint that enables the monitor to be pushed up nearly flush with the ceiling.

Uploaded by

josue jetavionics
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

This unit is ideal in situations where bulkhead space forward and aft is

limited. The compact metal enclosure makes it easy to mount directly


to the bulkhead or build into the cabinet wall
• Built for retrofit installation with a compact metal enclosure
for increased flexibility
• No expensive switching required, three inputs included
• VGA for the Flight Display Moving Map and computer graphics
• 2 composite inputs for DVD, Glareshield camera, and more
• Controls on unit or use the included IR remote to switch video
source, adjust preferences, etc.
• Extremely wide viewing angle allows multiple passengers to
watch the same monitor FD70CV-M
• Crystal clear LCD with industry leading brightness

DO-160 TESTED FAA/PMA Approved


Dimensions 6.8” (W) x 4.75” (H) x 1.20” (D)
Weight 1.6 lbs
Display Size 5.89” x 3.5”
Power 12 - 28V @ 1.0Amps - .4Amps Display Resolution WVGA 800x480
PC Input VGA (Analog RGB 15 pin D-sub) Supported Resolutions 640x480 - 1600x1200
Video Input 2 Composite Video Aspect Ratio 16:9 Widescreen
Video Type NTSC/PAL Display Type 7” TFT LCD
Screen Control On-Screen Display Menu Brightness 400 cd/m2
Remote Control IR, included

FDBASE

not included
Ideal for any drink rail or side wall, this monitor can be mounted
FDBASE-W
virtually anywhere and stowed out of sight

• 7” and 10.2” monitors on arm mounts are interchangeable

• Arm attachment to the monitor is offset for increased flexibility not included

• Rotates full 180 degrees left and right, also adjustable tilt FDBASE-FL
forward and aft

• Monitors can be removed when not in use and for taxi, takeoff,
and landing
FD70ARM-G not included

• LCD and arm mount included, base receptacles sold separately

DO-160 TESTED (FD70CV-M FAA/PMA Approved)


Mount Dimensions Stowed 7.0” (W) x 8.75”(H) x 1.35”(D)
Weight 2 lbs 1.5 oz
Mount Type Articulating Arm
CURRENT AS OF 9/29/2009
FDBASE-2G
The FD70ARM-G set has been specifically designed as a retrofit
installation in a Gulfstream 450/550 aircraft. A unique dual-base unit
matches up with the existing mounting pattern of the base units not included
currently installed in the aircraft. This makes a retrofit installation in an
older Gulfstream aircraft very simple
Although the FD70ARM-G set is designed for the Gulfstream aircraft, it
can also be used in many other aircraft interior applications. This monitor
set is perfect for any club seating arrangement
• Arm attachment to the monitor is offset for increased flexibility
• Rotates full 180 degrees left and right, also adjustable tilt
FD70ARM-G
forward and aft
• Monitors can be removed when not in use and for taxi, takeoff,
and landing
DO-160 TESTED (FD70CV-M FAA/PMA Approved)
Mount Dimensions 7” (W) x 3.9”(H) x 1.5”(D)
* Set (pictured right) consists of: FD70ARM-G-L, FD70ARM-G-R Weight 2 lbs 1.7 oz
and FDBASE-2G (each item is sold separately) Mount Type Articulating Arm

FDBASE-W-FM

Designed to mount on the sidewall in aircraft with limited or no


drinkrail space available
• Removable arm slides into mounting bracket on side wall and locks not included
into place
• Release button allows monitor to be removed and stowed
• Rotation 180 degrees left and right, also adjustable tilt forward
and aft FD70ARM-G-FM
• Interchangeable with other size monitors on flush arm mount
• LCD and arm mount included, base receptacles
sold separately
DO-160 TESTED (FD70CV-M FAA/PMA Approved)
Mount Dimensions 7”(W) x 6.5”(H) x 1.35”(D)
Weight 2 lbs 1.5 oz
Mount Type Articulating Flush Arm

This compact ceiling mount is ideal for installations in limited space


between passenger service units or in a ceiling
• The all metal case is designed with a narrow footprint for flexibility
in mounting
• Features constant torque friction hinges which enable the user to
position the LCD at various locations for the optimal viewing angle
• Mechanical release deploys the monitor and is stowed by pushing FD70CMT-M
up to the latch
• The display can be pushed up manually 180 degrees from the
latching point where it becomes almost flush with the ceiling
for ease of egress DO-160 TESTED (FD70CV-M FAA/PMA Approved)
Mount Dimensions Stowed 6.8” (W) x 1.46” (H) x 7.25” (D)
Mount Dimensions Deployed 6.8” (W) x 6.20” (H) x 7.25” (D)
Weight 2 lbs 15 oz
Mount Type Friction Hinge Ceiling

You might also like