RAYMING PCB & ASSEMBLY

ASIC vs. ASSP vs. SoC vs. FPGA – What’s the Difference?

Integrated circuits are essential building blocks powering nearly all modern electronic systems.
Various semiconductor devices offer different capabilities and tradeoffs between factors like performance,
development cost, and flexibility.

Key categories of ICs include Application-Specific ICs (ASICs), Application-Specific Standard Products
(ASSPs), System-on-Chips (SoCs), and Field Programmable Gate Arrays (FPGAs). This article contrasts the
key differences between these IC implementation approaches and provides guidance on selecting suitable
options for electronics projects.

Table of Contents

ASIC Overview

An Application-Specific Integrated Circuit, or ASIC, is a custom silicon chip designed and manufactured for
a particular application or function. Some defining traits of ASICs include:

 Fully customized to requirements with tailored circuits

 Very high performance since logic is hand-optimized

PCB Manufacturing & Assembly Services https://www.raypcb.com/

 RAYMING PCB & ASSEMBLY

 Long development time and high non-recurring engineering costs

 Manufactured by semiconductor foundry
 Amortize high upfront cost over volume production

ASICs harness the full power of integrated circuit fabrication technology, packing up to billions of
transistors tailored for target applications onto silicon dies less than a square inch. Functions consolidated
into ASICs span digital logic, analog interfaces, memory, custom processors, sensors, and mixed signal
processing.

Since ASICs are fully designed from the ground up, they entail extensive engineering investment but achieve
maximum density, performance, and power efficiency implementing desired functions in silicon. High
volume consumer products like smartphones or IoT edge nodes benefit most from custom ASIC solutions.

Request PCB Manufacturing & Assembly Quote

ASSP Overview

PCB Manufacturing & Assembly Services https://www.raypcb.com/

 RAYMING PCB & ASSEMBLY

While ASICs target a single specific application, Application-Specific Standard Parts (ASSPs) provide
common integrated circuit functions useful across a range of systems. Some key ASSP traits are:

 Standard IC products designed for broad applicability

 Integration improves cost/power/size versus discrete solutions
 Shorter time to market since designs are ready-made
 Limited customization; tailored through external components
 Lower volumes than ASICs; niche vs. mass market

Rather than invest in fully custom ASIC development, ASSPs provide integrated circuits addressing
common needs that can be adopted off the shelf with some customization through external passive
components, programming, and software drivers.

Examples include codecs, graphics processors, microcontrollers, physical layer transceivers, power
management ICs, sensors, wireless radios, and many more. ASSPs are widely used to add intelligence and
reduce component count in consumer electronics, IoT endpoints, industrial equipment, automotive,
aerospace, medical products, and other embedded systems.

SoC Overview

A System-on-Chip (SoC) integrates multiple functions onto a single silicon die, similar to ASSPs but with
greater focus on customer-specific system consolidation. Attributes of SoCs include:

 Complete electronic system integrated into one IC

 Can blend digital logic, analog, memory, processors, etc.
 Extensive incorporation of IP building blocks
 Closer to ASIC than ASSP regarding customization
 Innovation enabler for product miniaturization

SoCs enable fully integrated single-chip solutions tailored for target applications. A smartphone SoC might
pack CPU cores, graphics, cellular radios, accelerometers, and other components previously implemented
with many discrete ICs.

This system consolidation is achieved by extensive intellectual property reuse. Various processor cores,
interface blocks, and subsystems are integrated like LEGO bricks to match requirements while minimizing
expensive custom logic.

SoCs occupy a middle ground between ASSPs and full custom ASICs. Their application-optimized
integration can enable product breakthroughs by packing entire small electronic systems onto single
cost-effective ICs.

FPGA Overview

PCB Manufacturing & Assembly Services https://www.raypcb.com/

 RAYMING PCB & ASSEMBLY

Field Programmable Gate Arrays (FPGAs) offer an IC alternative maximizing flexibility and rapid
prototyping by making logic gates and routing programmable using software. Key FPGA traits are:

 Reconfigurable logic gates and routing

 Programming allows implementing custom hardware functions
 Faster bring-up compared to ASICs with reduced NRE
 No high upfront fabrication costs; sold off the shelf

This reprogrammability makes FPGAs ideal for lower volume products that demand flexibility or require
hardware upgradeability. Their architecture is also suited to hardware acceleration and high performance
computing applications using inherent fine-grained parallelism.

While not reaching the density or performance limits of fixed-function ASICs, FPGAs empower agile
development with reduced costs and risks. Programming follows a structured design flow from concept
through synthesis, place and route, and configuration bitstream generation.

Development Process Comparison

PCB Manufacturing & Assembly Services https://www.raypcb.com/

 RAYMING PCB & ASSEMBLY

These IC alternatives follow very different development processes and economics:

ASIC ASSP SoC FPGA

Design Style Fully Custom Fixed Mix of Custom and Configurable
Function IP Fabric
Process 45nm – 7nm 28nm – 5nm – 65nm 16nm – 28nm
node 180nm
Typical Gate 10M – 5B 50K – 1M 5M – 2B 100K – 5M
Count
Development 24+ months 6-12 months 12-36 months 3-12 months
Time
Mask Cost $2M – $5M $500K $1M – $3M Minimal
Unit Cost $1 – $500+ $2 – $100 $10 – $150 $5 – $100
Design Full custom System Processor, Hardware
Expertise IC integration digital/analog/RF description

PCB Manufacturing & Assembly Services https://www.raypcb.com/

 RAYMING PCB & ASSEMBLY

ASIC ASSP FPGASoC

IC language
Applications High-volume Broad Consumer devices, Aerospace/defense,
consumer market edge servers, instrumentation,
electronics, horizontal automotive, etc. networking,
network functions acceleration
systems,
computing
ASICs, ASSPs, SoCs and FPGAs each fill particular technology niches based on this range of
characteristics.

Performance Comparison

The maximum achievable performance follows a tradeoff between flexibility and customization:

ASIC ASSP SoC FPGA

Logic Density Highest Moderate High Lowest
Speed Fastest Fast Medium Slowest
Power Efficiency Excellent Very Good Good Poorest
Cost at Scale Lowest Low Medium Highest
Design Cost Highest Lowest High Medium
Time to Market Slowest Fastest Medium Fast
IP Reuse Little None Extensive Moderate
Upgradeability None None Moderate High
ASICs achieve unparalleled density, speed and efficiency implementing logic in silicon but require immense
upfront investment. ASSPs quickly provide known functions but with less custom configurability. SoCs
balance integration with some optimization for target applications. FPGAs make iterative hardware
development accessible through their configurable architecture.

Request PCB Manufacturing & Assembly Quote

Application Fit Analysis

PCB Manufacturing & Assembly Services https://www.raypcb.com/

 RAYMING PCB & ASSEMBLY

Determining the best IC approach involves analyzing product requirements and business factors:

Volume – ASICs only make sense above very high volumes given high fixed costs. ASSPs and FPGAs suit
lower quantities.

Performance – When pushing the limits of speed, power or density, custom ASICs have an edge. But often
an SoC or FPGA meets needs.

Flexibility – FPGAs allow modifying hardware after deployment. ASSPs offer modest configurability.
ASICs are fixed.

PCB Manufacturing & Assembly Services https://www.raypcb.com/

 RAYMING PCB & ASSEMBLY

Cost – Strongly related to volume. ASSPs minimize cost for modest volumes. ASICs achieve lowest cost at
scale.

Time-to-market – ASSPs and FPGAs enable faster product development. ASICs have long lead times.

Design Experience – ASSPs leverage existing designs. ASICs require semiconductor engineering expertise.

Upgrade Cycles – FPGA and flash-based SoCs can evolve in the field. ASSPs and ASICs are fixed at
fabrication.

Analyzing these factors helps determine the best IC approach for particular products and markets. Hybrid
solutions can combine ASSPs or FPGAs with some custom logic using ASICs or eFPGAs where
programmability is still needed after volume production.

Conclusion

ASICs, ASSPs, SoCs and FPGAs each have merits depending on product requirements, markets, and
business objectives.

 ASICs provide unmatched performance through customization but require extensive investment
only warranted for mass-market consumer devices.
 ASSPs quickly integrate common functions with modest flexibility.
 SoCs deliver application-optimized consolidation blending IP reuse and customization.
 FPGAs maximize prototyping agility with in-field reconfigurability.

Understanding this IC landscape allows architects to select solutions balancing capability, cost, risk, and
time-to-market for electronics projects across diverse industries. Advances like design tool automation and
fabrication improvements continue expanding the realm of feasible customization. But fundamental tradeoffs
remain between flexibility, integration, efficiency, and fixed costs that must be weighed given business
constraints.

Frequently Asked Questions

If ASICs offer maximum performance, why aren’t they more widely used?

The extremely high non-recurring engineering costs and development time make ASICs only practical for
very high volume consumer products where the massive upfront investment is recouped over millions of
units. They are not feasible for lower volume systems.

What are some examples of common ASSP products?

PCB Manufacturing & Assembly Services https://www.raypcb.com/

 RAYMING PCB & ASSEMBLY

Some widely used ASSPs include microcontrollers, display drivers, image sensors, touchscreen controllers,
wireless modems, Ethernet PHYs, power management ICs, USB interface chips, and
codecs/DSP audio processors.

Why can’t multiple ASSPs be combined to form a low-cost substitute for an SoC?

Using multiple ASSPs requires PCB area for packaging and interconnects between chips. This increases cost
and size while reducing reliability compared to a single-chip SoC solution. SoCs improve integration.

If FPGAs are flexible, why would you ever need an ASIC or SoC?

FPGAs cannot match the density, performance, and power efficiency of either ASICs or SoCs. So for
high-volume cost-sensitive products demanding maximum speed or low power, ASICs or SoCs will be
superior through customization.

Can a product transition from FPGA to ASIC for production?

Yes, this is a common strategy allowing prototype on FPGA then cost reduce with a fixed ASIC for
manufacturing. Some even use structured ASICs or eFPGAs to retain a degree of reconfigurability.

Related Posts:

1. What is the difference between Xilinx FPGA and Altera FPGA?

2. FPGA and CPLD:What is the Difference?

3. What is Difference Between FT600 and FT601 Evaluation FPGA Board ?

4. Understanding XC7K70T-1FBG484 FPGA: How it sets itself Apart from Other FPGA

https://www.raypcb.com/soc-fpga-and-asic/

PCB Manufacturing & Assembly Services https://www.raypcb.com/