®

Electronic - PC Board and Small Dimension Fuses Bussmann

In-Line Fuse and Fuseholders

GLR *HLR GMF and GRF
Fast Acting, Non-rejecting Fuseholder Time Delay, Non-rejecting
Voltage Rating: 300Vac or less Voltage Rating: 300Vac or less
Interrupting Rating: 10,000A Interrupting Rating: 10,000A
Agency Information: Std. 248-14 Agency Information: Std. 248-14
UL Listed, 0-15A/300Vac 0-10A, UL Listed (Guide JDYX,
(Guide JDYX, File E19180) File E19180)
CSA Certified, 0-10A/300V CSA Certified, (Class 1422-01,
(Class 1422-01, File 53787) File 53787)
Electrical Ratings for Type GLR Fuses Electrical Ratings for Type GMF and
and Non-Rejection Style Carriers GRF Fuses and Non-Rejection Style Carriers
Fuse Carrier1, 2 Fuse Carrier1, 2 Fuse Carrier1, 2 Fuse Carrier1, 2
GLR-‹Ω¡ § HLR GLR-5 HLR GMF-‹Ω¡ º HLR GMF-3 HLR
GLR-⁄Ω™ HLR GLR-6 HLR GMF-⁄Ω™ HLR GMF-3 ¤Ω¡ º HLR
GLR-1 HLR GLR-7 HLR GMF-flΩ¡ º HLR GMF-4 HLR
GLR-1 ⁄Ω™ HLR GLR-8 HLR GMF-°Ω¡ º HLR GMF-5* HLR
GLR-1 flΩ¡ º HLR GLR-9 HLR GMF-1 HLR GMF-6 ⁄Ω¢ HLR
GLR-2 HLR GLR-10 HLR GMF-1⁄Ω¢ HLR GMF-10 HLR
GLR-3 HLR GLR-12 HLR GMF-1flΩ¡ º HLR GRF-7 HLR
GLR-4 HLR GLR-15 HLR-2A GMF-2 HLR GRF-8 HLR
GMF-2 ⁄Ω™ HLR GRF-10 HLR
1) Carrier is UL Recognized, Guide IZLT2, File E14853 and CSA Certified,
GMF-2 °Ω¡ º HLR
Class 6225-01, File 47235 12A, 300Vac.
2) Units can be panel-mounted either in a knockout hole with a separate steel clip (BK/A- 1) Carrier is UL Recognized, Guide IZLT2, File E14853 and CSA Certified,
104) or in a keyhole punch using separate mounting clip #6374 for panels of thickness Class 6225-01, File 47235 12A, 300Vac.
0.043”to 0.062” or #4909 for thickness 0.030” to 0.042” 2) Units can be panel-mounted either in a knockout hole with a separate steel clip (BK/A-
*For two leads order HLR-2A, 15A, 300V 104) or in a keyhole punch using separate mounting clip #6374 for panels of thickness
• An alternative to the HLR fuseholder is the A fuseholder. The A fuseholder comes 0.043”to 0.062” or #4909 for thickness 0.030” to 0.042”
WITHOUT leads. The customer inserts #18 insulated solid copper wire into the line side *For two leads order HLR-2A, 15A, 300V
receptacle as well as into the load side receptacle. It has the same body dimensions, • An alternative to the HLR fuseholder is the A fuseholder. The A fuseholder comes
utilizes the same mounting hole, and takes the same mounting clips as the HLR. The A WITHOUT leads. The customer inserts #18 insulated solid copper wire into the line side
fuseholder is UL Recognized, 10A, 300Vac, Guide IZLT2, File E14853 and CSA receptacle as well as into the load side receptacle. It has the same body dimensions,
Certified, 10A, 300Vac, Class 6225-01, File 47235. utilizes the same mounting hole, and takes the same mounting clips as the HLR. The A
• Do not put tension on line (rear) terminal of fuseholder. fuseholder is UL Recognized, 10A, 300Vac, Guide IZLT2, File E14853 and CSA
Certified, 10A, 300Vac, Class 6225-01, File 47235.
• Do not put tension on line (rear) terminal of fuseholder.

CE logo denotes compliance with European Union Low Voltage Directive (50- CE logo denotes compliance with European Union Low Voltage Directive (50-
1000Vac, 75-1500Vdc). Refer to Data Sheet: 8002 or contact Bussmann 1000Vac, 75-1500Vdc). Refer to Data Sheet: 8002 or contact Bussmann
Application Engineering at 636-527-1270 for more information. Application Engineering at 636-527-1270 for more information.

Data Sheet: 2032 Data Sheet: 2031

GLQ HLQ3 GMQ

Fast-Acting, Size Rejecting Fuseholder Time-Delay, Size Rejecting
Voltage Rating: 300Vac or less Voltage Rating: 300Vac or less
Interrupting Rating: 10,000A Interrupting Rating: 10,000A
Agency Information: Std. 248-14 Agency Information: Std. 248-14
UL Listed (Guide JDYX, UL Listed (Guide JDYX, File E19180)
File E19180) CSA Certified, (Class 1422-01,
CSA Certified, (Class 1422-01, File 53787)
File 53787)
Electrical Ratings for Type GLQ Electrical Ratings for Type GMQ Fuses
Fuses and Rejection Style Carriers and Rejection Style Carriers
Fuse Carrier3, 4 Fuse Carrier3, 4 Fuse Carrier3, 4 Fuse Carrier3, 4
GLQ-1 HLQ-1flΩ¡ º GLQ-3 HLQ-3 ¤Ω¡ º GMQ-⁄Ω™ HLQ-⁄Ω™ GMQ-2⁄Ω™ HLQ-3 ¤Ω¡ º
GLQ-1⁄Ω™ HLQ-1flΩ¡ º GLQ-4 HLQ-5 GMQ-flΩ¡ º HLQ-1flΩ¡ º GMQ-3 HLQ-3 ¤Ω¡ º
GLQ-1flΩ¡ º HLQ-1flΩ¡ º GLQ-5 HLQ-5 GMQ-°Ω¡ º HLQ-1flΩ¡ º GMQ-3 ¤Ω¡ º HLQ-3 ¤Ω¡ º
GLQ-2 HLQ-3 ¤Ω¡ º GLQ-9 HLQ-10 GMQ-1 HLQ-1flΩ¡ º GMQ-4 HLQ-5
GLQ-2 ⁄Ω™ HLQ-3 ¤Ω¡ º GLQ-10 HLQ-10 GMQ-1⁄Ω¢ HLQ-1flΩ¡ º GMQ-6 HLQ-8
GMQ-1flΩ¡ º HLQ-1flΩ¡ º GMQ-6 ⁄Ω¢
3) Carrier is UL Recognized, Guide IZLT2, File E14853 and CSA Certified,
Class 6225-01, File 47235 10A, 300Vac.
GMQ-2 HLQ-3 ¤Ω¡ º
4) Units can be panel-mounted either in a knockout hole with a separate steel clip (BK/A- 3) Carrier is UL Recognized, Guide IZLT2, File E14853 and CSA Certified,
104) or in a keyhole punch using separate mounting clip #6374 for panels of thickness Class 6225-01, File 47235 10A, 300Vac.
0.043”to 0.062” or #4909 for thickness 0.030” to 0.042” 4) Units can be panel-mounted either in a knockout hole with a separate steel clip (BK/A-
• Do not put tension on line (rear) terminal of fuseholder. 104) or in a keyhole punch using separate mounting clip #6374 for panels of thickness
0.043”to 0.062” or #4909 for thickness 0.030” to 0.042”
• Do not put tension on line (rear) terminal of fuseholder.

CE logo denotes compliance with European Union Low Voltage Directive (50- CE logo denotes compliance with European Union Low Voltage Directive (50-
1000Vac, 75-1500Vdc). Refer to Data Sheet: 8002 or contact Bussmann 1000Vac, 75-1500Vdc). Refer to Data Sheet: 8002 or contact Bussmann
Application Engineering at 636-527-1270 for more information. Application Engineering at 636-527-1270 for more information.

Data Sheet: 2033 Data Sheet: 2030

For complete specification data, call Bussmann Information Fax ~ 636.527.1450 39