Scribd
Upload
50 views3 pages

Karta Katalogowa en K-07-S-15N

Keno sp.z o.o. presents a ballast structure for installing solar panels on flat roofs without interfering with the roofing. The structure uses angled supports and ballast placed underneath to provide a slight tilt for drainage. Installation is quick with modules mounted on their short side. The technical department can calculate ballast requirements based on location, roof dimensions, module details and distribution. A 10-year warranty is provided for the ballast structure.

Uploaded by

A c
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
50 views3 pages

Karta Katalogowa en K-07-S-15N

Keno sp.z o.o. presents a ballast structure for installing solar panels on flat roofs without interfering with the roofing. The structure uses angled supports and ballast placed underneath to provide a slight tilt for drainage. Installation is quick with modules mounted on their short side. The technical department can calculate ballast requirements based on location, roof dimensions, module details and distribution. A 10-year warranty is provided for the ballast structure.

Uploaded by

A c
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

BALLAST CONSTRUCTION ON A FLAT ROOF

CHARAKTERYSTYKA
CHARACTERISTIC

Keno sp.z o.o. is pleased to present you a non-invasive solution for flat roofs with the use of a ballast
structure, with the possibility of changing the angle of inclination of the modules. The structure is
dedicated to cases where there is no possibility of interfering with the roof sheathing.

EASY AND QUICK


INSTALLATION

MOUNTING OF MODULES
ON THE SHORT SIDE

POSSIBILITY OF CHANGING
THE ANGLE OF THE MODULES

POSSIBILITY
OF MOUNTING EAST-WEST

SEE
CATALOG

W W W. K E N O - E N E R G Y.C O M
BALLAST CONSTRUCTION ON A FLAT ROOF

DESCRIPTION OF THE BALLAST CONSTRUCTION ON A FLAT ROOF

Keno sp.z o.o. provides a 10-year warranty on the above structure. The assembly of the
structure is carried out by loading the structure with ballast, which is placed on the angles
under the modules. The technical department of Keno sp.z o.o., at the request of the client,
can calculate the required minimum ballast. For this purpose, specific information on the
investment is needed (see table 2). The ballast structure can be used on roofs where the
angle of inclination does not exceed 5 ̊.
Keno sp.z o.o. ballast structures they allow modules to be installed only on the shorter side.

SMALL ASSEMBLY TRIAN- ANGLE


Fig. 1,2,3 INSTALLATION ON THE GLE (K-07-15N) 15º
SHORT SIDE (HORIZONTAL
ARRANGEMENT)
SMALL ADJUSTABLE AS-
SEMBLY TRIANGLE ANGLE
(K-07-M-RN) 20-35º

CALCULATION OF THE BALLAST

DATA FOR BALLAST CALCULATION


1. The exact location of the investment.
2. Roof dimensions + building height.
3. A Module dimensions + weight..

4. Visualization of modules distribution on the roof slope.

KENO Sp. z o.o. +48 32 230 25 71


ul. Daszyńskiego 609 44-151 Gliwice [email protected]
NIP: PL6312671983 BDO: 000006820 www.keno-energy.com
BALLAST CONSTRUCTION ON A FLAT ROOF

TECHNICAL DRAWING

FIG. 1. Dimension of K-07-M-15N

Fig. Dimenssions K-07-M-RN

KENO Sp. z o.o. +48 32 230 25 71


ul. Daszyńskiego 609 44-151 Gliwice [email protected]
NIP: PL6312671983 BDO: 000006820 www.keno-energy.com

You might also like