Sant Dnyaneshwar Shikshan Sanstha's

Annasaheb Dange College of Engineering and Technology, Ashta

DEPARTMENT OF AERONAUTICAL ENGINEERING
An Autonomous Institute
National Conference on
Research and Developments in Aeronautical Engineering
Tentative Schedule: Day 1 (15 March 2024, Friday)
09:00 to 10:00 Registration Department of Aeronautical Engineering

10:00 to 10:40 Conference Inauguration Seminar Hall

Keynote Talk 1 :
10:45 to 11:15 CFD Contributions to Research & Development in Aeronautical Engineering Seminar Hall
Dr. Nikhil Vijay Shende, Director, S & I Engineering Solutions Pvt. Ltd.

11:15 - 11:30 - Short Tea Break

11:30 to 13:30 Technical Session 1

Paper ID : 05 Aerodynamic Performance Study of V-Groove Riblets Inspired by Shark Skins

Optimizing Variable Volume Balloon Design for Venus: A Computational Study of Drag Coefficients Using
Paper ID : 19
ANSYS-Fluent CFD
Session Chair :
Paper ID : 51 CFD Analysis of the Effect of Optimized Hook Structures on Flow Separation Behavior of Aerofoil Surface 1. Dr. Manish Tripathi
2. Mr. Sanoj P. Suresh
Paper ID : 04 Investigation of Aerodynamic Characteristics of Airfoil Profile Through Variable Thickness Morphing Strategy
Venue : HALL A
Sensitivity studies on Vortex Panel Method and Genetic Algorithm with application to design and optimization
Paper ID : 09
of airfoils

Paper ID : 10 Efforts in the development of newer nose geometries for hypervelocity operations

11:30 to 13:30 Technical Session 2

Paper ID : 12 Optimizing Turbofan Engine Performance Through Nozzle Choking Characteristic

Paper ID : 06 Fabrication of Electrical Propulsive Fuselage In Commercial Aircraft Session Chair :

1. Dr. S. Yuvaraj
Paper ID : 11 Mitigation of Combustion Driven Oscillations in Gas Turbine Engines: New Methods and Techniques 2. Mr. Yogesh B. Kumbhar

Paper ID : 13 Numerical Simulations of Flow and Flame Characteristics of Double Cavity Trapped Vortex Combustor Venue : HALL B

Paper ID : 26 Experimental Investigation of Centre Line Core Jet Decay of Supersonic CD Nozzle with Cross-wire
 Sant Dnyaneshwar Shikshan Sanstha's
Annasaheb Dange College of Engineering and Technology, Ashta
DEPARTMENT OF AERONAUTICAL ENGINEERING
An Autonomous Institute
National Conference on
Research and Developments in Aeronautical Engineering
13:30 - 14:30 - Lunch Break

Keynote Talk 2 :
14:30 to 15:00 Seminar Hall
Armament Aerodynamics - Shri. Sunil Hiwale, Scientist F, ARDE, Pune
15:00 to 17:00 Technical Session 3

Paper ID : 15 Sago Leaf Biofuel for Sustainable RC Aviation

Paper ID : 25 Static Structural Analysis of Turbine Disc with Different Configuration Subjected to Thermal Loads And Torque Session Chair :
1. Dr. Vivekanandan A. K
Paper ID : 56 Design and Analysis of Sisal Fibre Reinforced Polymer Matrix Along with Copper Metal Powders 2. Mr. L. Oblisamy
Integrated Development of a Hexapod Robot For Space Exploration: From CAD Modeling to Kinematic
Paper ID : 54 Venue : HALL A
Analysis and Prototype Fabrication
Paper ID : 55 Surface Engineering of Aerospace Aluminium Alloy for Enhanced Corrosion Protection

15:00 to 17:00 Technical Session 4

Paper ID : 01 Modeling and Development of Non-Vectored Tail-Sitter UAV

Paper ID : 02 Technology Demonstration of Nitro Gen- Set

Paper ID : 03 Bio-Inspired Landing Gear for UAV’s Session Chair :

1. Mr. Reju R
Paper ID : 21 Longitudinal Control of Glider With Cross-Fin Configuration 2. Mr. Sabarsihwaran

Paper ID : 28 Research Study and Modelling of PEMFC for Drone Applications Venue : HALL B

Paper ID : 30 Study and Analysis of Voltage Drop in Proton Exchange Membrane for Drone Applications

Paper ID : 46 Design and Fabrication of Fixed-wing Vertical Takeoff and Landing (VTOL) Unmanned Aerial Vehicle (UAV)

Session Chair :
1. Mr. K. M. Kiran Babu
15:00 to 17:00 Poster Presentation 2. Mr. Karthick Pullela

Venue : Seminar Hall

 Sant Dnyaneshwar Shikshan Sanstha's
Annasaheb Dange College of Engineering and Technology, Ashta
DEPARTMENT OF AERONAUTICAL ENGINEERING
An Autonomous Institute
National Conference on
Research and Developments in Aeronautical Engineering
Tentative Schedule: Day 2 (16 March 2024, Saturday)
09:30 to 10:00 Keynote Talk 3 : Dr. R. K. Satapathy, Professor, Director - School of Robotics, DIAT, Pune Seminar Hall

10:00 to 10:30 Keynote Talk 4 : Dr. Manish Tripathi, IIT Bombay Seminar Hall

10:45 - 11:00 - Short Tea Break

11:00 to 13:00 Technical Session 5

Experimental Investigation on the Vibration and Energy Absorption of a Foam-Based Multi-Fiber Polymer
Paper ID : 42 Session Chair :
Composite
1. Dr. S. Sendhil Kumar
Paper ID : 57 Qualitative Comparison of Modal Analysis Response on An Aircraft Wing 2. Mr. Basithrahman A

Paper ID : 27 Investigation of Variables Impacting Micro-Channel (MCH) Evaporator Performance Venue : Hall A

Paper ID : 61 Aeroelastic modelling of a flexible wing HALE UAV

Paper ID : 62 Extensive review on Recess Vane Casing Treatment used in Axial Flow Fan

11:00 to 13:00 Technical Session 6

Paper ID : 31 Design, Fabrication and Testing of Hydrogen Storage System of Fuel Cell

Paper ID : 35 Design of a Modular Ornithopter with Replaceable Wings

Sizing, Fabrication and Flight Test Experiments of Reusable Indoor Hot Air Balloon (Rihab) For Various Envelope
Paper ID : 38 Session Chair :
Shapes and Materials.
1. Shri. Thaariq Ahmad Rafiq
Analyzing and Comparing the Performance of Diverse UAV Path Planning Techniques Based on Real-Time
Paper ID : 43 2. Mr. Sabarsihwaran R
Experimentation
Paper ID : 44 Design and Fabrication of Drone with Paint Spraying Mechanism Venue : Hall B

Paper ID : 45 Efficient Aerial Parcel Delivery Drone with Retractable Pulley Mechanism

Paper ID : 7 Development and Implementation of a Multipurpose Drone

13:00 - 14:00 - Lunch Break

 Sant Dnyaneshwar Shikshan Sanstha's
Annasaheb Dange College of Engineering and Technology, Ashta
DEPARTMENT OF AERONAUTICAL ENGINEERING
An Autonomous Institute
National Conference on
Research and Developments in Aeronautical Engineering

14:00 to 14:30 Keynote Talk 5 : Shri. Thaariq Rafiq, Co-Founder, NextLeap Aeronautics Pvt. Ltd., Bengaluru Seminar Hall

14:30 to 16:30 Technical Session 7

Paper ID : 39 Aerodynamic Study on Proposed Design of an Aerostat at Various Flow Conditions.

Paper ID : 40 Aerodynamic Analysis of a Passenger Transport Aircraft using OpenVSP

Performance Enhancement of NACA 0012 Airfoil Using A Leading-Edge Duct: An Experimental And Session Chair :
Paper ID : 52
Computational Study 1. Dr. Sudharson Murugan
2. Mr. P. Kaleeshwaran
Paper ID : 48 Design Analysis and Fabrication of a Small Scale Air Cushion Vehicle

Paper ID : 93 High Speed Fighter UAV with Electric Coil Gun Venue : Hall A

Paper ID : 22 Study of Resonant Periodic Orbits in the Binary Stellar Systems.

Preparation of Navigation Plan for Scenic Routes Between Bangkok and U-Tapao and Validation Using Flight
Paper ID : 24
Simulator
16:30 to 17:00 Valedictory & Award Distribution Seminar Hall