Vehicle Tracker Command List

Device command guidance

Get Server

Command SERVER#

Reply SERVER,0,62.171.165.156,18378,0

Set Server

Command Set domain name: SERVER,1,domain name,port,0#

server in default is tracksolid
Set IP: SERVER,0,IP,port,0#
Example SERVER,1,www.trackeg.com,18378,0#
Example SERVER,0,62.171.165.156,18378,0#
Reply OK

Get GPRS

Command GPRSON#
Reply GPRSON:1(1=ON, 0=OFF)

Turn off GPRS command

Command GPRSON,X#
Note X=0/1: 1 turn on GPRS，0 turn off GPRS
default: 1
Example GPRSON,1#
Reply OK!

Command for lock domain name / IP

Command LOCKIP#
Reply Domain successfully locked!

Note: Locked domain name can’t be unlocked again.

If the server SMS sent, you should reply “Error: The platform addresses are locked

modify!”
Command for unlock domain name / IP

Command UNLOCKIP#
Reply Domain successfully unlocked!

Note: Unlocked domains could be changed.

Back up domain name

Command Set domain name: BSERVER,1,domain name,port,0#

Set IP:BSERVER,0,IP,port,0#
Example BSERVER,1,www.utrackingme.com,8841,0#
Example SERVER,0,62.171.165.156,18372,0#
Reply OK!

Note: When the device is disconnected from the main server, it will connect to
backup server. When it fails to connect the backup server, the device will switch
back to the primary server.

APN and APN self-adaption

Get APN

Command APN#

Reply Currently use APN:internet.vodafone.net,internet,internet

APN Auto Set:ON

Set APN

Command APN,network name#

Example APN,internet.vodafone.net#
Reply OK! for the newly-set APN to take effect, the device will reboot after 10s.

Get APN self-adaption

Command ASETAPN#
Reply ASETAPN:ON
Currently use APN:internet.vodafone.net,internet,internet
APN self-adaption
Command ASETAPN,X#
Note X=ON/OFF. ON: turn on APN self-adaption, OFF: turn off self-adaption
Example ASETAPN,ON#
Reply OK! for the newly-set APN to take effect, the device will reboot after 10s.

Note: In default, the APN self-adaption is ON, there is no need to set the APN.

SOS number

Command SOS#
Reply SOS1: SOS2: SOS3: SOS4: SOS5:

SOS number

Add SOS number SOS,A, phone number 1,phone number 2,phone number 3,phone number
4,phone number 5#
Add the second SOS SOS,A,,phone number2#
number
Add the third SOS SOS,A,,,phone number3#
number
Delete SOS number SOS,D,sequence number 1,sequence number 2,sequence number
3,sequence number 4,sequence number 5#
Example ( Add SOS SOS,A,13728753237,13728753238,13728753239#
Number)
Reply OK! SOS1:13728753237 SOS2:13728753238 SOS3:13728753239 SOS4:
SOS5:
Example (Delete SOS SOS,D,1#
Number)
Reply OK! SOS1: SOS2:13728753238 SOS3:13728753239 SOS4: SOS5:

SOS alarm

Get SOS alarm

Command SOSALM#
Reply SOSALM:ON mode:2(0=only
GPRS,1=GPRS+SMS,2=GPRS+SMS+Call,3=GPRS+Call)
Turn on SOS alarm

Command SOSALM,A,M#
Note A=ON/OFF, default：ON;
M=0/1/2, way of alarming, 0: GPRS only, 1: SMS+GPRS, 2:
GPRS+SMS+phone call, 3, GPRS +CALL, default：2；
Example SOSALM,ON,1#
Reply OK!

SOS alarm triggering procedure

Press the SOS button for 3S to trigger the SOS alarm. If the alarm way is GPRS+SMS+call, the
SOS alarm message is immediately uploaded to the platform. Later,the power-off alarm SMS is sent
to the set SOS number, and the set SOS phone number is dialed in sequence. If one of the SOS
numbers is answered, it will stop dialing. If there is no answer, the call will be repeated up to 3
times. The number of calls can be set.

Parameter status

Version

Command VERSION#
Reply [VERSION]NT36_GT06N_WAAD_V2.1.1_211108.2013

Parameters

Command PARAM#
Reply Device parameters
Example PARAM#
Reply GPS report on time interval：
IMEI:356153591305617; TIMER:10,10; SENDS:5; SOS:,,; Center
Number:; Sensorset:10,1,5,1; Defense time:10; TimeZone:E,8,0;

GPS report on distance interval：

IMEI:868120103643505; Distance:200; SENDS:5; SOS:13730454825,,;
Center Number:;Sensorset:10,3,5,1; Defense time:10; TimeZone:E,8,0;
GPRS

Command GPRSSET#
Reply GPRS:ON; Currently use APN:internet.vodafone.net,internet,internet;
SERVER,1,www.trackeg.com,18378,0;
URL:http://maps.google.com/maps?q=N22.577156,E113.916748;

Status

Command STATUS#
Reply Battery:3.89V,NORMAL; GPRS:Link Up; GSM Signal Level:Strong;
GPS:Successful positioning; SVS Used in fix:19(24); , GPS Signal
Level:32,36,41,31,33,33,22,39,26,30,0,0,0,0,0,0,0,0 ACC:OFF;
Defense:OFF;

Reset

Command RESET#
Reply The terminal will restart after 20sec!

Restore to factory

Command FACTORY#
Reply OK!
The terminal will restart after 60s!

Note: If you send the FACTORY# command, all parameters except domain name, APN,
locked domain name will restore to default.

Timezone/Heartbeat packet

Get Timezone

Command GMT#
Reply GMT:E,8,0 (AUTO)
Timezone

Command GMT,A,B,C#
Note A: E/W; E for East Time Zone, W for West Time Zone; Default: E
B: 0 to 12; time zone; default: 8
C: 0/15/30/45; half time zone; default: 0
Example GMT,E,8# = GMT,E,8,0#
Reply OK!

Get Heartbeat packet time

Command HBT#

Reply HBT:3min, 5min

Heartbeat packet time

Command HBT,T1,T2#

Note T1 = 1 to 300 minutes, heartbeat packet upload interval when ACC ON ,

default value: 3 minutes;
T2 = 1 ~ 300 minutes, heartbeat packet upload interval when ACC OFF,
default: 5 minutes;
Example HBT,2,2#
Reply OK!

Position
Latitude and longitude

Command WHERE#
Reply Current position!
Lat:N30.234623,Lon:E31.497961,Course:234.68,Speed:0.00Km/h,DateTime:
2022-12-17 02:37:38
Location link

Command EURL,network links#

Note Network link in default：http://maps.google.com/maps?q=
Example EURL, http://www.google.cn/maps?q=#
Reply OK!

Address
Command URL#
Reply <11-15 14:13>http://maps.google.com/maps?q=N22.576740,E113.916530

GPS data sending interval

Get time interval

Command TIMER#
Reply TIMER:10,10

Upload in fixed time interval

Command TIMER,T1,T2#
Note T1 ranges 0/5~18000 seconds, upload interval when ACC ON, default
is 10;
T2 ranges 0/5~18000seconds, upload interval when ACC OFF, default is
10;
Example TIMER,60,60#
Reply OK!

Get fixed distance

Command DISTANCE#
Reply DISTANCE:300

Upload in fixed distance

Command DISTANCE,D#
Note D ranges 0/50~10000 meters, distance interval, default is 300;
Example DISTANCE,500#
Reply OK!
Get ACC status

Command ACCREP#
Reply ACCREP:ON

ACC status changes upload

Command ACCREP,A#
Note A=ON/OFF，upload for ACC status change，default: ON
Example ACCREP,ON#
Reply OK!

Get Number of calls setting

Command CALL#
Reply CALL:3

Number of calls setting

Command CALL,A#
Note A=times of calling, range: 1-3, default: 3
Example CALL,1#
Reply OK!

Power cut-off alarm

Get power cutoff alarm

Command POWERALM#
Reply POWERALM:ON,2,5,300
 Turn on power cutoff alarm

Command POWERALM,A,M,T1,T2#
Note A=ON/OFF, default: ON;
M=0/1/2, way of alarming,
0: GPRS only, 1:
SMS+GPRS,
2 : GPRS+SMS+phone call, M=3 GPRS+CALL,
default: 2; T1=2～60 (second), default: 5;
T2=1～3600 (second), default: 300
Example POWERALM,ON,1,10,60#
Reply OK!

Triggering process

When the fuse of external power supply is blown (or the external power supply is depleted) or the
external power cable is cut off, the device will immediately send a power off alarm to the SOS
number and platform.

Cut off Power Alarm!

<12-13 19:21>http://maps.google.com/maps?q=N22.577143,E113.916718
Geo-fence alarm

Get geo-fence alarm

Command FENCE#
Reply FenceType:Circle, OFF, Latitude:0.000000, Longitude:0.000000,
radius:300m, in out:IN or OUT, alarm type:1

Or

FenceType:Circle, ON, Latitude:N22.577091, Longitude:E113.916748,

radius:600m, in out:IN or OUT, alarm type:1

Turn on geo-fence alarm

Circular fence
Command FENCE,B,0,D,E,F,X,M#
Note B=ON/OFF, turn on/off fence alarm, default: off;
D=the latitude of the circle center; D=0, take current location as the center
E=the longitude of the circle center; E=0, take current location as the center
F=1～9999, the fence radius, unit：100 meters;
X=IN/OUT; IN: alarming when enter the fence, OUT: alarming when exit
the fence, blank means both alarming when enter or exit the fence, default:
blank.

M=0/1; way of alarming, 0: GPRS only, 1: SMS+GPRS, default: 1

Example FENCE,ON,0,N22.577124,E113.916786,8,,1#
Reply OK! FenceType:Circle, ON, Latitude:N22.577124,
Longitude:E113.916786,
radius:800m, in out:IN or OUT, alarm type:1.

Rectangle fence

Command FENCE,B,1,D,E,F,G,X,M#
Note B=ON/OFF, turn on/off fence alarm, default：off;
D=the latitude of the position 1；
E=the longitude of the position 1； F=the latitude of the position 2； G=the
longitude of the position 2；
X=IN/OUT; IN: alarming when enter the fence, OUT: alarming when exit
the
fence, blank means both alarming when enter or exit the fence, default:
blank.

M=0/1；way of alarming, 0：GPRS only, 1：SMS+GPRS, default：1

Example FENCE,ON,1,S23.34333,W112.54343,S23.56789,W112.78654,,0#
Reply OK! FenceType:Square, ON, Latitude1:S23.343330,
Longitude1:W112.543427, Latitude2:S23.567890,
Longitude2:W112.786537, in out:IN or OUT, alarm type:0.

Alarm message will be sent to the SOS numbers and platform if the

device is out of the geo-fence.

Out The Fence Alarm!<01-10 22:17>

http://maps.google.com/maps?q=N22.582577,E113.923843

Alarm message will be sent to the SOS numbers and platform if the

device is into the geo-fence and GPS is working.

Enter The Fence Alarm!<01-11 08:47>

http://maps.google.com/maps?q=N22.570841,E113.919792

Displacement alarm

Get displacement alarm

Command MOVING#
Reply Moving Switch:OFF; Radius:300m; Alarm type:1

Turn on displacement alarm

Command MOVING,A,R,M#
Note A=ON/OFF, default: OFF;
R=100～1000, moving radius, unit: meter, default: 300；
M=0～3, way of alarm. 0: GPRS only, 1: SMS+GPRS, 2:
GPRS+SMS+phone call, 3, GPRS+CALL, default: 1；
Example MOVING,ON,100,2#
Reply OK!

When the car is changing from ACC ON to ACC OFF, alarm will be triggered if the car moves
out of the displacement radius.
Attention! The vehicle is moved.<04-08 16:08>
http://maps.google.com/maps?q=N22.488430,E113.937729

Get Arming delay

Command DEFENSE#
Reply DEFENSE:10min

Arming delay command

Command DEFENSE,A#
Note A:1～600minutes，time for alarming delay，default: 10minutes
Query current DEFENSE#
parameter
Example DEFENSE,5#
Reply Ok!
Note: In arming state, if the car’s ACC is OFF for 10 minutes, the device
will switch to arming.

Low battery alarm

Get low battery alarm

Command BATALM#
Reply BATALM,ON,1

Turn on low battery alarm

Command BATALM,A,M#
Note A=ON/OFF; Default: ON
M= alarm way, range 0~1; default M=1
Example BATALM,ON,0#
Reply OK!

Note: When the remaining battery capacity is less than 10%, the device will send low

battery alarm to the SOS number and platform.

 SMS/GPRS: “Attention! The built-in battery is low, please charge!”

Low external battery alarm

Get low external battery alarm

Command EXBATALM#
Reply EXBATALM,ON,0,100,130,10

Turn on low external battery alarm

Command EXBATALM,A,M,N1,N2,T#
Note A=ON/OFF; Default: OFF
M = alarm way, range 0 ~ 1; 0 only GPRS, 1 SMS + GPRS;
default: M = 1;
N1=10-360; low voltage alarm threshold, unit: V default: 100
N2=10-360; contact alarm threshold, unit: V default: 130
T=1-300; detection time, unit: second, default value: 10 seconds;
Example EXBATALM,ON,0,100,130,10#
Reply OK!
Note: If the battery detected is lower than N1 for 10 seconds, external low battery

protection alarm will be triggered. If battery detected is higher than N2, the alarm will

be released.

SMS/GPRS: “Attention! Vehicle's battery power is low. Please charge!”

External low battery protection

Get external low battery protection

Command EXBATCUT#
Reply EXBATCUT,ON,1,120,135,10
Turn on external low battery protection

Command EXBATCUT,A,M,N1,N2,T#
Note A=ON/OFF ON：Power IC turned off if external low battery
protection requirements obtained. OFF: neither cut power IC nor enter
flight mode default: ON

M=alarm way, range: 0～1. 0: GPRS, 1: SMS+GPRS default: 1

N1=external voltage is lower than the low voltage protection

threshold ,range: 10-360; unit:V default: 120

N2=recover the external power supply voltage，range：10-360; unit:V

default: 135

T=detection time, range: 1-300, unit: second, default: 10 seconds

Query current EXBATCUT#
parameter
Example EXBATCUT,ON,1,120,135,10#
Reply OK!

Note: If the battery detected is lower than N1 for 10 seconds, external low battery

protection alarm will be triggered. If battery detected is higher than N2, the alarm will

be released.

SMS/GPRS: “Attention! Low voltage power supply!,Entry fly mode“

Get Centre number

Command CENTER#
Reply CENTER: 15942703401

Or

CENTER:

Centre number

Command CENTER,A,center number#

Delete center number CENTER,D#
Query current parameter CENTER#
Example CENTER,A,13827840728# / CENTER,D#
Reply OK
Center Number: 13827840728

Or

OK
Center Number:

Get Power/petrol

Command RELAY,A#
Reply RELAY:0

Power/petrol restore command

Command RELAY,A#
Note A=0/1: 0: connect the power/petrol;
1: disconnect the power/petrol
default: 0
Example RELAY,0#
Reply Restore fuel supply: Success!

Or

Already in the state of fuel supply to resume, the command is not

running!
Power/petrol cutoff command

Command RELAY,A#
Note A=0/1: 0: connect the power/petrol;
1: disconnect the power/petrol
default: 0
Example RELAY,1#
Reply Cut off the fuel supply: Success!

Or

Already in the state of fuel supply cut off, the command is not running!

Mileage

Get mileage statistics.

Command MILEAGE#
Reply MILEAGE:OFF, Total Mileage:0km,K:1000

Turn on mileage statistics.

Command MILEAGE,A,L#
Note A=ON/OFF; Default OFF
L = mileage initial value, mileage value, unit: km, range 0-999999km; when L is
0, it means that the mileage is cleared. The default is 0;
Example MILEAGE,ON,100#
Reply OK!

Note: The device will only calculate mileage when the car starts (ACC ON).
Get IMEI

Command IMEI#
Reply IMEI:359647091149455

Set IMEI

Command IMEI,A,New IMEI#

Example IMEI,A,356153590247828#
Reply OK! 356153590247828
General Notes:

• SOS command is before Center Number command (at least one

number in SOS).
• Count of SOS numbers is 5 numbers.
• Center number must be one of SOS numbers.
• If SOS numbers changed, you must make sure that center number
still one the new numbers, if not delete it.
• To set only SOS phone number 1: SOS,A, number 1#
• To set SOS phone number 2: SOS,A,,number 2#
• To set only SOS phone number 1,3: SOS,A, number 1,, number 3#
• To set only SOS phone number 2: SOS,A,, number 2# or
SOS,A,,number 2#
• In Rebooting you really waits for 20 seconds: “The terminal will
restart after 20sec”
• In case of SOS alarm, and calling SOS number as a response, may
be the battery will be removed, and the power cut off alarm will be
fired too, so if the call is already on, just send alarm packet, and
SMS.
• There is a default value for any parameter at any command.
Sometimes blank is a default value. So.
• If a command has 3 parameters, and the command sent with only
one value, you should depend on index to detect the parameter, and
also, other parameter should be set according to their default value.
Ex. MILEAGE,ON#. In this case MILEAGE command should
have 2 parameters, but I set only the 1st one, and the 2nd should be
assigned according to its default value which is “0”. Also, I can set
only the 2nd parameter (MILEAGE,,100#), and leave the 1st
parameter to be assigned to its default value which is “OFF”.