Scribd
Upload
37 views2 pages

WorkCentre 6400 Internal Release Notes R14-09

This release provides bug fixes and updates for the WorkCentre 6400. It fixes issues with consumables pages showing incorrect readings and headings. The firmware version is 061.070.104.24600 R14-09 and can be downloaded from the Xerox support site. The update instructions describe downloading the file through the device's CentreWare Internet Services without interrupting the system once started. Upon completion, the device will reboot.

Uploaded by

Isaac Velasco :D
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
37 views2 pages

WorkCentre 6400 Internal Release Notes R14-09

This release provides bug fixes and updates for the WorkCentre 6400. It fixes issues with consumables pages showing incorrect readings and headings. The firmware version is 061.070.104.24600 R14-09 and can be downloaded from the Xerox support site. The update instructions describe downloading the file through the device's CentreWare Internet Services without interrupting the system once started. Upon completion, the device will reboot.

Uploaded by

Isaac Velasco :D
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

WorkCentre 6400

Internal Release Notes


Set 061.070.104.24600 R14-09
Release Date: September 2014

Software Release Details

Component Version
Firmware 061.070.104.24600 R14-09

Purpose
This release provides the following bug fixes and updates:
SPAR CQGbl00586004 - In CWIS on the Consumables Page all Imaging Units are
CQGbl00587248
reading at zero percent.
The Embedded Pages Option - "Scanning Guide" shows incorrect heading on the
CQGbl00591626
LUI/WebUI when select Portuguese Language
Firmware Location
http://www.support.xerox.com/go/getfile.asp?objid=128766&EULA=38&Xtype=downl
oad&uType=
Installation Instructions
Read before beginning the firmware update :

 Do not interrupt system once download is in process. Interruptions or loss of power may corrupt the engine
firmware and render the system temporary unusable. (Service repair may be required to return the system to
a working condition.)
 Some of the device’s settings may be changed from their present value back to the factory default values by
the firmware update. It is recommended customers save the configuration page and use it as a reference to
restore the device’s settings after the firmware update is complete.

To print the configuration page:

1. Press the Machine Status button on the device control panel.


2. Press the Information Pages button.
3. Select Configuration Report and press Print.

Note: The firmware versions currently installed are displayed on the left column on the first page, under the
Software Versions heading.

To download a file to the device using CentreWare Internet Services (Windows and Mac):

NOTE: CWIS can only be accessed if the device is connected to a network that utilizes the TCP/IP protocol. The
device must also contain a valid IP Address.
Xerox Internal Use Only Page 1 of 2 Technical Support Operations
1. From a computer, open an Internet web browser.
2. Enter the device's IP Address in the Address field, and then press Enter.
3. Click on the Properties tab. You may be prompted to login. Default account = ‘admin’, password = ‘1111’.
4. Click General Setup | Machine Software | Upgrades in the list of options on the left side of the window and
verify that the checkbox for “Enabled” is checked
5. Click General Setup | Machine Software | Manual Upgrade in the list of options on the left side of the window.
6. Depending on the browser being used, click the Browse button, and then browse to and select the
WorkCentre_6400-system-sw#06107010316300#.DLM file.
7. Click the Install Software button to send the file to the device.

The browser will display a dialog once the file has been transferred to the device. A progress indicator is
displayed on the front panel. Upon completion, the device will reboot..

© 2014 Xerox Corporation. All rights reserved. Xerox ®, the sphere of connectivity design, and Phaser® are trademarks of Xerox Corporation in the United
States and/or other countries.

Xerox Internal Use Only Page 2 of 2 Technical Support Operations

You might also like