Scribd
Upload
29 views1 page

Pbsk278 - Fail Ub

This document contains a steel beam design check according to Eurocode standards. It analyzes Beam 1 under a loading of 4 kN. The beam is a S235 grade steel stub533x210x92 section. It was found to satisfy all clause checks with a critical ratio of 1.676 for lateral-torsional buckling. Key properties are provided, including material properties, section geometry, design data, and critical load calculations for each clause check.

Uploaded by

Bebeto
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
29 views1 page

Pbsk278 - Fail Ub

This document contains a steel beam design check according to Eurocode standards. It analyzes Beam 1 under a loading of 4 kN. The beam is a S235 grade steel stub533x210x92 section. It was found to satisfy all clause checks with a critical ratio of 1.676 for lateral-torsional buckling. Key properties are provided, including material properties, section geometry, design data, and critical load calculations for each clause check.

Uploaded by

Bebeto
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Job No Sheet No Rev

1
Part
Software licensed to Microsoft
Job Title Ref

By Date25-Jan-24 Chd

Client File Date/Time1b.std


PBSK278 ICE - PORTAL FRAME 31-Jan-2024 16:53

Steel Design (Track 2) Beam 1 Check 1


ALL UNITS ARE - KN METE (UNLESS OTHERWISE NOTED)
MEMBER TABLE RESULT/ CRITICAL COND/ RATIO/ LOADING/
FX MY MZ LOCATION
=======================================================================

* 1 STUB533X210X92 (BRITISH SECTIONS)


FAIL EC-6.3.2 LTB 1.676 4
341.40 C 0.00 276.36 0.00
=======================================================================
MATERIAL DATA
Grade of steel = S 235
Modulus of elasticity = 205 kN/mm2
Design Strength (py) = 235 N/mm2

SECTION PROPERTIES (units - cm)


Member Length = 1036.42
Gross Area = 117.00 Net Area = 117.00

z-axis y-axis
Moment of inertia : 55200.004 2390.000
Plastic modulus : 2360.000 355.000
Elastic modulus : 2070.906 228.380
Shear Area : 58.770 57.236
Radius of gyration : 21.721 4.520
Effective Length : 1036.418 1036.418

DESIGN DATA (units - kN,m) EUROCODE NO.3 /2005


Section Class : CLASS 1
Squash Load : 2749.50
Axial force/Squash load : 0.124
GM0 : 1.00 GM1 : 1.00 GM2 : 1.25

z-axis y-axis
Slenderness ratio (KL/r) : 47.7 229.3
Compression Capacity : 2534.3 401.0
Tension Capacity : 2749.5 2749.5
Moment Capacity : 554.6 83.4
Reduced Moment Capacity : 554.6 83.4
Shear Capacity : 797.4 776.6

BUCKLING CALCULATIONS (units - kN,m)


Lateral Torsional Buckling Moment MB = 164.9
co-efficients C1 & K : C1 =1.132 K =1.0, Effective Length=10.364

CRITICAL LOADS FOR EACH CLAUSE CHECK (units- kN,m):


CLAUSE RATIO LOAD FX VY VZ MZ MY
EC-6.3.1.1 0.851 4 341.4 94.1 0.0 276.4 0.0
EC-6.2.9.1 0.498 4 341.4 94.1 0.0 276.4 0.0
EC-6.3.3-661 0.833 4 341.4 94.1 0.0 276.4 0.0
EC-6.3.3-662 1.576 4 341.4 94.1 0.0 276.4 0.0
EC-6.2.6-(Y) 0.121 4 341.4 94.1 0.0 276.4 0.0
EC-6.3.2 LTB 1.676 4 341.4 94.1 0.0 276.4 0.0
Torsion and deflections have not been considered in the design.

Print Time/Date: 31/01/2024 16:58 STAAD.Pro V8i (SELECTseries 6) 20.07.11.33 Print Run 1 of 1

You might also like