Scribd
Upload
28 views

TSH Ip 00.0100 - 01

This document provides instructions for setting up gauges to qualify PVD coatings on connections. It describes how to interpret the values on a gauge set-up sheet provided by Tenaris to correctly set pin thread MRP, pin seal PND, box thread MRP, and box seal MRP gauges. The document is intended to standardize the gauge setting process across Tenaris and licensed threading facilities.

Uploaded by

Cong Bui
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
28 views

TSH Ip 00.0100 - 01

This document provides instructions for setting up gauges to qualify PVD coatings on connections. It describes how to interpret the values on a gauge set-up sheet provided by Tenaris to correctly set pin thread MRP, pin seal PND, box thread MRP, and box seal MRP gauges. The document is intended to standardize the gauge setting process across Tenaris and licensed threading facilities.

Uploaded by

Cong Bui
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

For PVD Qualification

Prepared by: Reviewed by: Approved by:

Rubén Stubelt F. Tobler Daniel Baiz


Premium Connections Premium Connections Premium Connections
Manufacturing Services Coordinator Manufacturing Services Coordinator Manufacturing Engineering Manager
Tenaris Tenaris Tenaris

Inspection Procedure

MRP / PND Set-up Sheet


Interpretation

Document Number TSH-IP-00.0100


Revision 01
Revision Date 28-Dec-2009
Effective Date 31-Dec-2009
Page(s) 06

This document as well as the information or data contained herein are confidential and shall not be copied, recopied,
reproduced, transmitted, disclosed or distributed to others or otherwise used for any purpose without the express, prior
and written permission of Tenaris Connections AG and/or Hydril Company and/or its affiliated companies ("Tenaris").
This document as well as the information or data contained herein are the exclusive property of Tenaris, and are to be
returned upon request therefore. All rights in proprietary and novel features of the subject matter are expressly reserved
by Tenaris. Recipient’s agreement to the foregoing is indicated by acceptance of this document. Copyrighted 2009 as an
unpublished work. ALL RIGHTS RESERVED.
For PVD Qualification Document Type Inspection Procedure
Document Number TSH-IP-00.0100
MRP / PND Gage Set-up Sheet
Interpretation Revision 01

Page Number 2

1. REVISION HISTORY

Effective
Rev. # Change Referenced Sections Prepared By: Reviewed by: Approved By:
Date

31-Dec-2009 01 New Document New Document


Name: R. Stubelt Name: F. Tobler Name: D. Baiz

Document Change

Disposition of
Affected Material

Raw Material X
In Process X
Completed X
For PVD Qualification Document Type Inspection Procedure
Document Number TSH-IP-00.0100
MRP / PND Gage Set-up Sheet
Interpretation Revision 01

Page Number 3

2. PURPOSE

2.1 The Purpose of this document is to explain how to Set a MRP or PND up by using a Gage Set-up
Sheet provided by Tenaris.

3. PERSONS AFFECTED

3.1 This document is applicable to all:


3.1.1 All Tenaris Premium Connections Manufacturing Services Personnel.
3.1.2 Facilities licensed to thread TenarisHydril connections.

4. REFERENCES

4.1 Not Applicable.

5. DEFINITIONS AND ABBREVIATIONS

5.1 Definitions and Abbreviations are defined in the most current revision of TenarisHydril document
TSH-GP-00.0001.

6. RESPONSIBILITIES

6.1 Responsibilities are defined in the most current revision of TenarisHydril document
TSH-GP-00.0002.

7. PERSONNEL QUALIFICATION

7.1 Personnel qualification is defined in the most current revision of TenarisHydril document
TSH-GP-00.0003.

8. PROCEDURES

8.1 Shoe and Tip Diameter.

4 Shoe Width.
5 Shoe Radius.

6 Ball Tip Diameter.


For PVD Qualification Document Type Inspection Procedure
Document Number TSH-IP-00.0100
MRP / PND Gage Set-up Sheet
Interpretation Revision 01

Page Number 4

8.2 Pin Thread MRP Gage:


The values indicated in the Gage Set-Up Sheet shall be set as follows:

1 Gage Block Stack: Length from MRP reference Surface to Shoe Border line.
2 Setting Diameter: Diameter Between Shoes. (Diameter to be set with Calibrated Blocks
or Mic Trac)

8.3 Pin Seal PND Gage:


The values indicated in the Gage Set-Up Sheet shall be set as follows:

3 Tip Center Line Length: Length from PND reference Surface to Ball Tip Center line.
This length is normally pre-set by the Gage manufacturer and can not be manually
adjusted.
2 Setting Diameter: Diameter Between Tips. (Diameter to be set with Calibrated Blocks or
Mic Trac)
For PVD Qualification Document Type Inspection Procedure
Document Number TSH-IP-00.0100
MRP / PND Gage Set-up Sheet
Interpretation Revision 01

Page Number 5

8.4 Box Thread MRP Gage:


The values indicated in the Gage Set-Up Sheet shall be set as follows:

1 Gage Block Stack: Length from MRP reference Surface to Shoe Border line.
2 Setting Diameter: Diameter Between Shoes (Diameter to be set with Calibrated Blocks
and Micrometer or Mic Trac).

8.5 Box Seal MRP Gage:


The values indicated in the Gage Set-Up Sheet shall be set as follows:

1 Gage Block Stack: Length from MRP reference Surface to Tip Border line.
2 Setting Diameter: Diameter Between Tips (Diameter to be set with Calibrated Blocks and
Micrometer or Mic Trac).
For PVD Qualification Document Type Inspection Procedure
Document Number TSH-IP-00.0100
MRP / PND Gage Set-up Sheet
Interpretation Revision 01

Page Number 6

9. ANNEX

9.1 Not Applicable.

You might also like