RESUME

RAJ KUMAR VISHWAKARMA

OBJECTIVE
To work in an environment which encourages me to success and grow professionally where I can utilize my
skills and knowledge appropriately.

CAREER SNAPSHOT:
As an quality engineer responsible to overall process, product, Machining and fabrication Quality
control during development and production in ordered to save quality and product cost.
Responsible to rejection and rework analysis with good knowledge of quality core tools.Engineer materials, National
International grade and standard i.e. IS,ISO etc.

WORKING EXPERIENCE
 LAXAMI MACHINE TOOLS PVT.LTD. Aug 2022. - Till
present
Associate (Sr.Engineer) in manufacturing (Q&I) department
1.0 Responsible to carryout in process & Inspection at supplier end,Daily Inspection calls.
2.0 Responsible to release dispatch clearance not on account of completion of delivery and
workmanship.
3.0 Responsible to ensure design/Engineering guidelines for manufacturing and Inspection.
4.0 Responsible to overall Inspection of Fabrication, Machining, Casting, Forging, Dimension,
Chemical, Mechanical etc.
5.0 Responsible to ensure ITP,QAP,BOM,SOP,WI,Workmanship, Project part list ,Procedure
followed etc.
6.0 Responsible to NCR,RCA,CAPA,Deviation and required Engineering Approvals.
7.0 Responsible to assist design and project department for revision of drawing, QAP,BOM etc.
8.0 Responsible to Maintain records as per QMS.
 AGRO AUTO GRIND ENGINEERS PVT.LTD. April 2019 - Aug 2022
Production & Quality engineer
1.0 responsible to Incoming, In process and Final Quality control.
2.0 Responsible to Manage all Quality issues
3.0 Responsible to review and discussed Drawing details and to support New products development.
4.0 Responsible to Process, product,PDI and Incoming Quality control.
5.0 Responsible to Activities planning, PFD and Inspection procedure.
6.0 Responsible to Blasting, Tinning,Babbitting and other Machining Operation.
7.0 Responsible to QAP,MTC,FIR,and Inspection procedure.
8.0 Responsible to process, product and costumer Audits.
9.0 Responsible to RCA,NC-NG handling.
 ALKA FORGING PVT.LTD. Nov 2016 - April 2019
Quality Engineer
1.0. Responsible to carryout in process & Inspection at supplier end,Daily Inspection calls.
2.0. Responsible to release dispatch clearance not on account of completion of delivery and workmanship.
3.0.Responsible to ensure design/Engineering guidelines for manufacturing and Inspection.
 4.0.Responsible to overall Inspection of Fabrication, Machining, Casting, Forging, Dimension, Chemical,
Mechanical etc.
5.0.Responsible to ensure ITP,QAP,BOM,SOP,WI,Workmanship, Project part list ,Procedure followed etc.
6.0.Responsible to NCR,RCA,CAPA,Deviation and required Engineering Approvals.
7.0.Responsible to assist design and project department for revision of drawing, QAP,BOM etc.
8.0.Responsible to Maintain records as per QMS.
PROJECT AND PRODUCT
 Cement plant equipment
1.0 Cement plant equipment I.e. Cooler,Preheated,Kiln,Tyre,Roller,Air slide etc.
2.0 Related Customers- ACC cement, UTCL,Ambuja,Star cement etc.
 HPP(Hydro Power Project)
1.0 Complete manufacturing of spiral casing, Turbine housing, Mill Base Full assembly,, Distributors
Assembly, Main Bearing Housing with liner complete Assembly, shaft and runner, turbines
2.0 Related costumer- HPP,ANDRITZ,BOITH,FLOWEL ENERGY, MHPP,NHPC JINDAL POWER,SCHENCK
PROCESS etc.
 Miscellaneous exposure
1.0 Manufacturing of various kind of shaft,Cylinder, Hub,Spiral,Housing, Liners,Roger and other Mechanical
equipment for Soap,Sugar,Packing and Paper Industry.

- EDUCATION-

Passed high school in 2007 with Second division.

COMPUTER KNOWLEDGE
 Basic Knowledge of Computer.
 Knowledge of M.S. Office.

SKILL SET
 Maintain all new samples with layout Inspection report.
 Initial Inspection, part validation & Supplier process audit of new Developing parts.
 Reading Drawing For layout Inspection.
 Geometrical&Dimension Inspection.
 Good knowledge of ITP,QAO etc.
 Making Product Inspection Standard for Part inspection during Receipt Inspection.
 Carrying out sample piece inspection.
 Carrying out final inspections.
 Looking out for defects in a product.
 Entering inspection results into a database
 Monitoring all inspection and testing equipment to ensure current and valid calibration.
PERSONAL INFORMATION

Date of Birth : 05/10/1990

DECLARATION

I solemnly declare that the above information is true and correct to the best of my knowledge. I understand
that if any information given above is found false/incorrect, my candidature is liable to be rejected.

Date:

Place: RAJ KUMAR VISHWAKARMA