0% found this document useful (0 votes)
147 views8 pages

ECL Comfort 310 - A333 - 1 - Adaos

This document contains configuration information for an ECL 310 heating controller with software version 2.15 and hardware serial number 406604. It lists settings for temperatures, schedules, alarms, inputs and outputs for an application controlling a heating circuit. Measurement data such as current temperatures and pressures are also displayed.

Uploaded by

Lupu Sorin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
147 views8 pages

ECL Comfort 310 - A333 - 1 - Adaos

This document contains configuration information for an ECL 310 heating controller with software version 2.15 and hardware serial number 406604. It lists settings for temperatures, schedules, alarms, inputs and outputs for an application controlling a heating circuit. Measurement data such as current temperatures and pressures are also displayed.

Uploaded by

Lupu Sorin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 8

Description

ECL310 A333_1 V02


V2.15 (11356)
(modify description)

ECL 310 System Information

087H3040 SW Version 2.15(11356) HW I Serial no. 406604


Application A333.1 V02

Date 10/5/2023 13:12

Values

Flow temperature_1

11175 Heat curve 1


11177 Temp. min. 10 °C
11178 Temp. max. 90 °C
11253 Des. flow T 10 °C
11400 Y1 75 °C
11401 Y2 60 °C
11402 Y3 50 °C
11403 Y4 45 °C
11404 Y5 40 °C
11405 Y6 28 °C

Return limit_1

11031 High T out X1 15 °C


11032 Low limit Y1 40 °C
11033 Low T out X2 -15 °C
11034 High limit Y2 60 °C
11035 Infl. - max. 0
11036 Infl. - min. 0
11037 Adapt. time 25 s
11085 Priority 0
11255 S5 Sensor reference 50 °C
Page 1 / 8
Flow / Power limit_1

11109 Input type 10


11110 Actual 0
11111 Limit 999.9
11112 Adapt. time 0s
11113 Filter constant 10
11115 Units 0
11116 High limit Y2 999.9
11117 Low limit Y1 999.9
11118 Low T out X2 -15 °C
11119 High T out X1 15 °C

Optimization_1

11011 Auto saving -15 °C


11012 Boost 0%
11013 Ramp 0m
11014 Optimizer 9
11021 Total stop 0
11026 Pre-stop 1
11179 Summer, cut-out 20 °C

Control Parameter_1

11174 Motor pr. 9m


11184 Xp 80 K
11185 Tn 30 s
11186 M run 60 s
11187 Nz 3K
11189 Min. act. time 10

Application_1

11017 Demand offset 0K


11023 M exercise 0
11052 DHW priority 0
11077 P frost T 2 °C
11078 P heat T 20 °C
11093 Frost pr. T 10 °C
11141 Ext. input 0
11142 Ext. mode 0
11500 Send desired T 1

Temp monitoring_1

11147 Upper difference 0K


11148 Lower difference 0K
11149 Delay 180 s
11150 Lowest temp. 30 °C

Schedule_1 (3110)
Page 2 / 8
Day: Start1 Stop1 Start2 Stop2 Start3 Stop3
Monday 900 1200 1800 2200 2400 2400
Tuesday 900 1200 1800 2200 2400 2400
Wednesday 900 1200 1800 2200 2400 2400
Thursday 900 1200 1800 2200 2400 2400
Friday 900 1200 1800 2200 2400 2400
Saturday 900 1200 1800 2200 2400 2400
Sunday 900 1200 1800 2200 2400 2400

Holiday1_1 (10700)

Mode: Start: End:


1 1 2014 1 1 2014

Holiday2_1 (10707)

Mode: Start: End:


1 1 2014 1 1 2014

Holiday3_1 (10714)

Mode: Start: End:


1 1 2014 1 1 2014

Holiday4_1 (10721)

Mode: Start: End:


1 1 2014 1 1 2014

Alarm1_1

11614 Alarm high 25 bar


11615 Alarm low 0 bar
11617 Alarm time-out 10 m

General_1

4201 Mode

10500 Min Outdoor Temp 192 °C


10501 Min Hour Time 0
10502 Min Minute Time 0
10505 Max Outdoor Temp 192 °C
10506 Max Hou Time 0
10507 Max Minute Time 0
10510 Outdoor Trend 0
11100 Outdoor acc. T 192 °C
11180 Des. T comfort 20 °C
11181 Des. T saving 16 °C
11201 S1 sensor 192 °C
Page 3 / 8
11501 Reference place 10 °C
4211 Circuit 1 status

General_2

12614 Alarm high 25 bar


12615 Alarm low 0 bar
12617 Alarm time-out 10 m
4212 Circuit 2 status

General_3

13614 Alarm high 25 bar


13615 Alarm low 0 bar
13617 Alarm time-out 10 m
4213 Circuit 3 status

General_4

14614 Alarm high 25 bar


14615 Alarm low 0 bar
14617 Alarm time-out 10 m
4214 Circuit 4 status

Input_config

4100 Config type S7 2


4101 Config type S8 2
4102 Config type S9 2
4103 Config type S10 2
4104 Config type S11 1 (0)
4105 Config type S12 1 (0)
4120 Config option S7 0
4121 Config option S8 0
4122 Config option S9 0
4123 Config option S10 0
4124 Config option S11 0
4125 Config option S12 0

Pump control_1

11022 P exercise 0s
11310 Retry time 0m
11311 Change, duration 7
11312 Change time 12
11313 Stab. time 50 s
11314 Chan.-over time 15 s
11316 Alarm handling 0
11322 Pressure, diff. 1.5 bar

Page 4 / 8
Refill water_1

11318 Max. pressure 40 bar


11319 Max. press. diff. -0.5 bar
11320 P exercise 0s
11321 Pressure, des. 2 bar (3)
11323 Time-out 10 m
11325 Valve delay 1s
11326 No. of pumps 2 (1)
12311 Change, duration 1 (7)
12316 Alarm handling 0
12341 Time left 1h
13322 Pressure, diff. 0.4 bar (1.5)
15615 Alarm low 0 bar
15617 Alarm time-out 10 s

Pressure1

11600 Pressure 2.3 bar


11607 Low X 2V
11608 High X 10 V
11609 Low Y 2 bar (0)
11610 High Y 10 bar (25)
17113 Filter constant 2

Pressure2

14113 Filter constant 4


14600 Pressure 0 bar
14607 Low X 2V
14608 High X 10 V
14609 Low Y 0 bar
14610 High Y 25 bar

Pressure3

12113 Filter constant 2


12600 Pressure 0 bar
12607 Low X 2V
12608 High X 10 V
12609 Low Y 0 bar
12610 High Y 25 bar

Pressure4

13113 Filter constant 4


13600 Pressure 0 bar
13607 Low X 2V
13608 High X 10 V
13609 Low Y 0 bar
13610 High Y 25 bar

General_5

Page 5 / 8
4215 Circuit 5 status

4246 Circuit 5 limiter flags 1 0


4247 Circuit 5 limiter flags 2 0
4248 Circuit 5 limiter flags 3 0
4249 Circuit 5 limiter flags 4 0

General_6

4216 Circuit 6 status

4250 Circuit 6 limiter flags 1 0


4251 Circuit 6 limiter flags 2 0
4252 Circuit 6 limiter flags 3 0
4253 Circuit 6 limiter flags 4 0

ECL_alarm

1024 Alarm field 2 0


1025 Alarm field 1 0
1032 Alarm clear 2 0
1033 Alarm clear 1 0
2052 Sensor monitor valid mask1 0
2054 Sensor monitor error mask1 0

ECL_system

1 System Command 0
8 Build no. 11356
19 Code no. 3040
34 Hardware 18692
35 Software 527
36 Serial no. 406604
38 Modbus addr. 1
39 Baud 38 (0)
2048 ECL 485 addr. 15
2049 Modbus bias. 0
2050 Language 1
2097 Wink 0
2099 Production week 5654
10198 Aut. daylight 1
60058 Backlight 5
60059 Contrast 3

ECL_Extension

2150 Service pin 0


2151 Ext. reset 0

Ethernet

258 Address type 1


278 IP 1 192.168.102.101
282 Gateway IP 1 192.168.102.1
286 Net Mask 1 255.255.255.0
2152 Inbound accept 2 (0)
Page 6 / 8
2153 Portal encryption 1 (0)
2160 ECL Portal 0
2161 Connection status 0
2162 Portal status 0
2165 Server name, char 1 ecl.portal.danfoss.ro
2230 Password, char 1 ----
2240 DNS IP1 1 192.168.102.1
2244 DNS IP2 1 208.67.222.222

Raw_sensor

10201 S1 sensor 192 °C


10202 S2 sensor 192 °C
10203 S3 sensor 192 °C
10204 S4 sensor 192 °C
10205 S5 sensor 192 °C
10206 S6 sensor 192 °C
10207 S7 sensor 0V
10208 S8 sensor 0V
10209 S9 sensor 0V
10210 S10 sensor 2.38 V
10211 S11 sensor 192 °C
10212 S12 sensor 192 °C
10213 Room Unit A, Sensor 1 192 °C
10216 Room Unit B, Sensor 1 192 °C

SCADA_override

10399 Scada Timeout 3


10400 Scada Outdoor temperature 192 (0)
10401 Scada heat offset 1 0
10402 Scada heat offset 2 0
10403 Scada heat offset 3 0
10404 Scada heat offset 4 0
10405 Scada boiler ctrl 1 0
10406 Scada boiler ctrl 2 0
10407 Scada boiler ctrl 3 0
10408 Scada boiler ctrl 4 0
10409 SCADA slave request -64 (0)
10410 SCADA resulting reference 10
10420 Scada Schedule timeout 180
10421 Scada Schedule 1 0
10422 Scada Schedule 2 0
10423 Scada Schedule 3 0
10424 Scada Schedule 4 0
10425 Scada Schedule 5 0
10426 Scada Schedule 6 0
10427 Scada Optim value 1 0
10428 Scada Optim value 2 0
10429 Scada Optim value 3 0
10430 Scada Optim value 4 0
10431 Scada Optim value 5 0
10432 Scada Optim value 6 0

Output_status

3995 Estimated Motor Position 1 0%


3996 Estimated Motor Position 2 0%
3997 Estimated Motor Position 3 0%
4000 Triac 1 0
4001 Triac 2 1
Page 7 / 8
4002 Triac 3 0
4003 Triac 4 0
4004 Triac 5 0
4005 Triac 6 0
4006 Relay 1 1
4007 Relay 2 0
4008 Relay 3 0
4009 Relay 4 0
4010 Relay 5 0
4011 Relay 6 0
4019 ECA35 PWM4 0

M-bus Config

5994 GW Command request 0


5995 GW State 3
5996 GW Telegram size 0
5997 Baud 3
5998 Command 0
5999 State 3

ECL_system_ex

4236 AccumulatedPulse 1 0
4238 AccumulatedPulse 2 0
4240 AccumulatedPulse 3 0

Page 8 / 8

You might also like