Delta

Inspection & Petroleum Services

ROPEACCESS— NDT – LIFTING—RADIOGRAPHY

High Performance
High Quality

Website: www.deltaips.net
Salem Al Mubarak St., Soud Al Mutairi Complex ,
M1 Floor , Office 21 ,Salmiya, Kuwait
phone (00965)90078311
[email protected]
Introduction

Dips ® was established to cover the Egyptian market requirements for NDT,
Lifting Gear inspection with Rope Access Technique.

Dips ® has also added to its activities, the supply & allocation of skilled
specialist manpower, through its great database of specialized and
experienced manpower that has served the Oil / Gas sector.

Dips ® continues to provide value added services which reduce risk and protect
customers’ investment.

Dips ® inspection services have grown with the market - providing superior
support . We use the highest quality NDT methods which include UT ultrasonic,
MPI magnetic particle inspection, ET eddy current, PT Dye Penetrant, Hardness
Testing Services and radiographic & X-Ray .

Dips ® has the authority from Egyptian Atomic Authority to use isotope
and X-Ray at radiographic activities
Mission, Vision,Strategy & Values

Mission,
Our mission is to fulfill customer satisfaction, trust, and integrity by delivering quality

services conforming to industry best practices and continuous process improvement. We

deliver safe, high-quality, technology-driven equipment, services and support that focus on

the activities essential to oil and gas drilling and production.

Vision,
Become the service leader company with world class standards in the industries and market
segments we serve.

Strategy,
we are driving forward with key technologies & high qualifications to enable the inspection
to be performed in less time, less cost, high quality, fast response and high technique.

Values
Community, Integrity, Passion, Quality & Growth.
Membership & Recognition

We are ISO Certified Accredited by LIYODS Register: ISO 9001: 2015.

We are ISO Certified Accredited by LIYODS Register: ISO 9001: 2015.

We are "ISO 45001: 2018" Accredited by LIYODS register.

We are "ISO 14001: 2015" certified, Environmental Management

System - Accredited by LIYODS register.

We are Certified of full Membership, Lifting Equipment Engineers

Association. - Certificate No. 6455.

We are an IRATA International Member, for Rope Access (Operator

& Trainer) – Certificate No. 7108/OT.

We are formally recognized as a member of Drops, the industry

wide initiative focused on preventing dropped objects in the
workplace.

DIPS is licensed from the Egyptian Nuclear & Radiological Regulatory

Authority (ENRRA) for Industrial Radiography.

We are Certified for ABS Certificate, for Hull Gauging for vessels.
Our Services

1. Non-Destructive Testing Inspection & Examination Services.

2. Industrial – Radiographic Service License no. I.S. 0139/19.

3. Advanced Non-Destructive Testing.

4. Lifting Equipment Inspection.

5. In services Inspection.

6. Welding and Painting Inspection.

7. Dropped Objects Survey.

8. Rope Access Services.

9. Competancy Training Courses.

Non Destructive Test (NDT).

We can perform all the required NDT such as U.T, R.T, P.T, and M.T through a highly qualified and
certified team, we issue the reports of NDT in accordance with the applicable codes and
standards We also perform hardness testing and positive material identification (PMI).

Industrial Radiographic Testing (RT)

Is a non-destructive testing (NDT) method which uses either x-rays or gamma rays to examine the
internal structure of manufactured components identifying any flaws or defects.

In Radiography Testing the test-part is placed between the radiation source and film. The material
density and thickness differences of the test-part will attenuate and then recorded on film(s).

DIPS staff are qualified, certified, and have a lot of experience using X-ray and gamma ray devices.

Producing high quality radio-graphs according to international codes and standards requirements.

DIPS operate within strict health and safety parameters.

Advanced Non-Destructive Testing

Phased Array Ultrasonic Testing (PAUT)

is an advanced method of ultrasonic testing, which is widely used for

nondestructive testing (NDT) in several industrial sectors, such as

construction, pipelines, and power generation to detect discontinuities,

cracks or flaws and thereby determine component quality, and also can be
used for wall thickness measurements in conjunction with corrosion testing.

A PAUT is more robust and easier to use than conventional single-element probes, providing improved
efficiency, capturing hundreds of signals at once, and reducing the number of false alarms.
PAUT provides a permanent record. And because PAUT can detect defects at the surface and into the
volume of a weld (with no dead zone), it also gives information about the lateral position of a defect
(depth and height).
PEC (Pulsed Eddy Current)
Modified NDT utilize PEC-LYFT-Eddyfi equipment.

Pulsed eddy current (PEC) is an advanced electromagnetic

inspection technology used in detecting flaws and corrosion
in ferrous materials typically hidden under layers of coating,
fireproofing, or insulation. It is a screening tool.
It will detect generalized corrosion. Pulsed Eddy Current is a unique
corrosion survey method that allows ferrous objects to be surveyed
without the need to make contact with the surface.
This means that measurements can be performed on objects
covered with insulation, asbestos, fireproofing, concrete or coating.
The high costs for removal of insulation can therefore be avoided.
Benefits:

 Inspect through thick insulation and fireproofing

 Save on insulation removal costs
 Wall thickness up to 100mm
 Lift off range up to 300mm
No problems with high temperature (tested up to 420 °c)

MFL Tank floor inspection (Magnetic Flux Leakage)

Modified NDT utilize MFL- Silverwing- Floormap 3Di-M- Eddyfi equipment.

It is an automated scanning system for accurate

and efficient corrosion inspections on tank floors.
By combining two technologies – Magnetic Flux Leakage (MFL)
and Surface Topology Air-Gap Reluctance Sensor (STARS)
it can detect and size corrosion and pitting
on storage tanks and pipelines.
Benefits:

Full tank floor mapping mode

Advanced defect sizing and classification tools
High probability of detection
IRIS Tube Inspection (Internal Rotary Inspection System)
Modified NDT utilize Ectane 2- Eddyfi equipment for IRIS Tube Inspection.

The internal rotary inspection system (IRIS) is an ultrasonic

non-destructive testing (NDT) technique used to inspect tubes.
IRIS is an ultrasonic technique that requires a couplant (water).
Tubes under test must therefore first be flooded to use this technique.
It is a technology that works on all materials, regardless of properties
(suitable for ferrous and nonferrous materials).
It provides very accurate wall thickness measurement results.
IRIS is used in detection of corrosion, pitting and wall loss.
It can detect both internal and external defects.

ECT Tube Inspection (Eddy Current Testing)

Modified NDT utilize Ectane 2- Eddyfi equipment for ECT Tube Inspection.

Eddy current testing is an electromagnetic non-destructive

testing technique used to inspect non-ferromagnetic materials.
It is widely used to examine tubing in heat exchangers,
steam generators, condensers, air coolers and feed water heaters.
This technique is used for detection and sizing of cracks, corrosion,
erosion, and mechanical damage. EC is a very fast inspection method.

MFL Tube Inspection (Magnetic Flux Leakage)

Modified NDT utilize Ectane 2- Eddyfi equipment for MFL Tube Inspection.

Magnetic flux leakage (MFL) is an electromagnetic

non-destructive testing technique used to detect
corrosion and pitting in ferromagnetic materials.
MFL uses a powerful magnet to magnetize the conductive
material under test. Where there are defects (corrosion or material loss),
the magnetic field “leaks” from the conductive material. It is a fast inspection
technique that is effective for aluminum-finned carbon steel tubes, because
the magnetic field is almost completely unaffected by the presence of such fins.
NFT Tube Inspection (Near Field Testing)
Modified NDT utilize Ectane 2- Eddyfi equipment for NFT Tube Inspection.

Near-field testing (NFT) is an electromagnetic

technique used to inspect tubes. It is specifically
suited to detecting corrosion, erosion, and pitting
in ferromagnetic materials. NFT is perfect for fin-fan
tube heat exchangers because eddy currents do not go
through the wall of the tube. It can detect internal defects.

FT Tube Inspection (Remote Field Testing)

Modified NDT utilize Ectane 2- Eddyfi equipment for RFT Tube Inspection.

Remote-field testing (RFT) is a non-destructive electromagnetic

testing technique mainly used to find defects like
corrosion and pitting in tubes. It is suitable for ferromagnetic materials.
RFT can detect both internal and external defects.

SRUT (Short Range Ultrasonic Testing)

Modified NDT utilize ISONIC 2005, OmniScan X3 and OmniScan MX2 for SRUT.

Short Range Ultrasonic testing (SRUT) is a screening

non-destructive test method to detect corrosion
on the pipe wall or plates concealed under support structures
or structural shell. The special SRUT probe is placed away
from the area of interest (generally concealed surface) to scan up to 1m
of material length without losing adequate sensitivity. Annular rings under
the Tanks shells are best inspected using Short Range Ultrasonic testing.
LRUT (Long Range Ultrasonic Testing)
Modified NDT utilize Teletest Focus- Eddyfi Equipment for LRUT.

Long Range Ultrasonic Testing is used to remotely analyze assets

for corrosion and flaws over long distances without the need for direct contact.
LRUT is used to rapidly inspect pipelines, piping systems, and other assets
with minimal insulation removal. LRUT quickly localizes cracking and corrosion
damage to pinpoint and characterize length and depth.

Phased Array
Modified NDT utilize OmniScan X3 and OmniScan MX2 for Phased Array inspection.

Phased Array uses arrays of ultrasonic beams that are computer-controlled

and steered electronically. An array is a group of transmitters and receivers,
generally called array elements. This advanced ultrasonic testing method
is both fast and highly efficient at defect detection due to multiple simultaneous
sound beams (angles). It is used to detect discontinuities such as cracks or flaws in welds.
In addition to detecting flaws in welds, phased array is also used for corrosion mapping.

TOFD (Time of Flight Diffraction)

Modified NDT utilize OmniScan X3 and OmniScan MX2 for TOFD inspection.

Time-of-flight-diffraction is a widely used advanced ultrasonic testing method

to detect cracks or flaws and size them in welds. It can detect planar defects and
cracks not perpendicular to the measured surface. The defect height can also be
exactly determined and the high probability of detection (POD)
associated with this method greatly improves risk reduction and calculation accuracy.
Digital Radiography
Modified NDT utilize Duerr scanner for Digital Radiography.

Digital radiography is an advanced technology based on digital detector

systems instead of films, in which the image is displayed directly on a computer
screen without the need for developing chemicals or intermediate scanning.
Advantages of advanced digital radiography over conventional radiography
is that exposure time can be shorter, no chemical evaluation is needed,
better-quality testing and higher contrast image as compared to conventional radiography.

Acoustic Emission
Acoustic emission testing is a non-destructive testing (NDT) technique that detectsand
monitors the release of ultrasonic stress waves from localized sources when
a material deforms under stress. Acoustic Emission can be conducted during operation.
This technique is used to detect a range of damage mechanisms including, but not
limited to,
fiber breakages, friction, impacts, cracking, delamination and corrosion in their early
stages,
before they become significant issues. Acoustic emission is used for assessing structural
integrity and for health monitoring of components.

Indirect Visual Testing

Modified NDT utilize End Scope yateks Model p680fm for indirect visual testing.

Modified NDT performs indirect visual testing of materials with specific cameras
and video endoscopes in places that are difficult or impossible to access by humans.
Endoscopes allow for an internal inspection without disassembly, saving time and money.
With advanced visual testing it is easier to follow defect development and product state.
 Conventional NDT Services

Ultrasonic Testing
Conventional Ultrasonic Testing (UT) inspection is a commonly-used
non-destructive testing (NDT) technique that measures the propagation
of mechanical vibrations (ultrasonic waves) through a material to examine
properties, measure thickness and detect a range of discontinuities, including
corrosion/erosion, flaws and cracks. It is used to detect surface and
sub-surface defects and supply accurate readings regarding discontinuity size and shape.

Radiographic Testing
Radiographic Testing (RT) inspections use X-Ray or Gamma ray (Ir-192, Co-60)
sources to view and assess the internal structure of an asset. RT is sensitive
to corrosion, changes in thickness, voids, cracks, and material density changes,
and is able to detect both surface and sub-surface defects with minimum surface
preparation required. Radiographic Testing (RT) accurately locate, size,
and identify the defects. It provides a permanent record of the inspection.

Magnetic Particle Testing

Magnetic Particle Testing is a quick, cost-effective NDT inspection method
to detect surface and near-surface discontinuities. In MT, the ferromagnetic
material is magnetized and finely-milled iron particles coated with
a dye pigment is applied. The particles indicate a discontinuity
in the material by clustering directly over it, which can be visually
detected under proper lighting conditions.
Thickness measurement
Penetrant Testing
Penetrant Testing (PT) is a non-destructive method used for finding
surface-breaking discontinuities on relatively smooth, nonporous surfaces.
It is a low-cost technique and can inspect complex geometries easily.
In PT, assets do not have to be disassembled or removed from the facility
for inspection, making the inspection process quick and efficient.

Visual Testing
Visual Testing (VT) is a basic and cost-effective method of inspection
and is used to gain a quick indication of the inspected specimen or asset.
It is the process of looking over a piece of equipment using the naked eye
to verify the general integrity. Visual testing can be performed in direct mode
(with the bare eye) or via an indirect method, by mirrors, cameras and other
equipment also called advanced visual testing.

Vacuum Box Testing

Vacuum box testing is a non-destructive testing (NDT) method used for
locating welding leaks. A vacuum box and a compressor create a high
or low-pressure vacuum and a detergent solution is applied to the test area.
The detergent bubbles help to identify the leaks within the created pressure
envelope (formation of bubbles as leakage gas passes through the solution).
The main objective of the Vacuum box testing technique is to locate leaks
in welds due to through-thickness discontinuities.
Hardness Testing
Hardness is the measure of how resistant a material is too various
kinds of permanent shape deformation when a force is applied.
Hardness testing makes it possible to determine material characteristics
such as strength, ductility and wear resistance. It also shows whether
the heat treatment process has been carried out properly.
These properties can be critical for the intended application of a material.

Positive Material Identification (PMI)

Positive Material Identification is a specialized non-destructive testing
method for identifying the composition of components and material.
PMI provides information of the grade of metal and on the alloy composition.
The mechanical integrity of safety critical plant is dependent on the correct
materials being used for vessels, piping, valves and pumps. If the incorrect
material is used, the design assumptions are invalid and the components may fail
due to the material having lower strength or poor corrosion resistance.

Holiday Test
Holiday test is an inspection method used to detect discontinuities
such as pinholes and voids in painted/coated surfaces using specialized
tools and equipment. Holidays tests work on the concept of electrical conductivity.
Metal substrates are excellent conductors of electricity, and therefore allow current
to flow through them. On the other hand, many coatings are poor conductors of electricity
and resist the flow of electricity. Using this principle, holiday tests use instruments
to locate flaws in anticorrosive paints and coatings.
Online PSV testing calibration
Modified NDT utilize Online PSV testing calibration- AccuTest equipment.

The old way of PSV/PRV testing could be summarized in one word: downtime.
First, the plant went down, then valves were disassembled, and finally,
the valves were transported offsite for testing. This way was time-consuming,
costly and high risk. But using the AccuTEST System, PSV/PRV testing comes to you,
right where the valves actually operate, without adjustment in operating
pressure which is time saver, cheaper and Lower risk.
Benefits:

Reduces downtime. No need to place the plant off-line for a week

and remove the valves, or sending them to an outside testing facility.
Reduces loss of revenue by preventing the risk of safety valve damage during transportation for testing.
No system discharge (No fuel costs, so improves the environmental conditions)
No dismantling of the safety valves from the system (saves time and money)
For welded valves no cost for cutting and subsequent welding inspections
No need for shutdown to calibrate and test PSV.

Heat treatment

PWHT (Post Weld Heat Treatment)

Modified NDT has 9 PWHT machines of 70 KVA Power units and 65 KVA Power Units.

A post weld heat treatment is a process that involves elevating the temperature of
a material or materials following a welding process. A post weld heat treatment
is performed to alleviate residual stresses, increase the strength, increase or decrease
the hardness, and reduce the risk of cracking. An array of heating processes
can be used to carry out post weld heat treatment.
Lifting Equipment Inspection
DIPS has full LEEA Membership (Lifting Equipment Engineers Association) and is specializing in
thorough examination & testing of the lifting equipment to ensure that it is fit for use in accordance
with British Standard or other International Standard.

Our specialist team are highly trained in the field of all types of lifting accessories and equipment
inspection ensuring to meet the minimum safety requirements.

Send a detailed report stating deficiencies for inspected equipment that is deemed unsafe. When
deficiencies are corrected or repairs are completed , proper tests and certificates will be issued.

The examination can range from visual inspection, NDT inspection, functional testing, or load
testing. Once the item has passed the test, a “Report of Thorough Examination” is issued.

In-Service Inspection
DIPS have highly trained, certified inspectors and examiners available to customers in the
refining, petrochemical, oil and gas and power industries. Whether it is implementing a risk
based inspection program, managing a turnaround or simply maintaining day to day compliance
inspections, our services provide clients with the cost effective, high quality, value added
services that will only be realized through continued commitment to safety, skills training and
proficiency, experience, and co-operation.
In-Service Inspection Services include:

 API 510/570/653 Certified Inspectors.

 AWS Certified Welding Inspectors (CWI).
 BGAS Certified Inspectors.
 NDE Level II UT/MT/PT Certified Technicians.
 Experienced Engineering Personnel.
 AutoCAD Staffing and Services.
 Process Safety Management (PSM) Programs and Implementation.
 Positive Material Identification (PMI).
 Risk Based Inspection (RBI).
 Non-Destructive Testing (NDT) Services.
Welding Inspection & Certification.

DIPS have highly trained, certified (AWS Certified Welding Inspectors

(CWI) and examiners available to customers in the refining,
petrochemical, oil and gas and power industries.

Welding Inspection Services include:

 Review of welding procedure qualification WPS and PQR as per
applicable codes and standards.
 Witness the Procedures Qualification Records (PQR).
 Witness Welders Performance Qualification (WPQ).
 Perform the welding inspection as third party and /or client
Representative. Issue independent reports of the performed
inspection.

Painting and coating inspection

The Painting inspector judges the conditions where a coating, paint or spray is to be applied and
suggests types of coatings that will protect materials from harsh corrosive environments.
He is making sure the painting process being done based on project requirements.

Dropped Objects Survey

An effective Dropped Objects Prevention Scheme (DROPS) plays an important role in supporting the

safety practices of a platform.

Our team will scan an area for any potential falling hazards with the aim of preventing future
dropped objects.
This can cover everything from lost fittings to pipe clamps and ladders to hand rails and includes the
checking of all primary and secondary securing. We check for potential static and dynamic dropped
objects.
Rope Access services
Rope access techniques lead to execution of jobs that cannot be performed with the use of traditional
techniques and bring a drastic reduction term in costs while maintaining the highest safety standards.

DIPS as an IRATA member , has highly qualified professionals and equipment constantly maintained and
inspected, in accordance with the industry’s highest regulatory standards.

Rope access techniques minimize interference with other activities and reduce the time needed to close
the maintenance stop and programmed works.

Our qualified and experienced personnel are professionally trained and Certified by IRATA, the
Industrial Rope Access Trade Association and being operated under the guidelines of the IRATA
international code of Practice.

Dips works with IRATA technicians for many years. Dips has been certified as Operator and training
member by IRATA no 7108/OT.

As an IRATA member, DIPS offers a wide range of Rope Access services involving the Oil & Gas industry
and with our experience and knowledge we can deliver the quality.

Rope Access INSPECTION SERVICES

 NDT & Inspection.
 Hull Inspection and Class Surveys.
 Lifting Equipment Inspection.
 Dropped Objects Survey.
 Painting and coating inspection.

Rope Access MAINTENANCE SERVICES

 Painting & Blasting.
 Welding & Fabrication.
 Bolt Torque Tensioning.
 Industrial Cleaning.
 Cladding and Insulation.
 Installation and Repair.
 Fixing Gas Detectors / Fire Detectors.
 Work Positioning Nets.
 Work Positioning Platforms.
Rope Access EMERGENCY RESCUE TEAMS

A fast management on site of Emergency with appropriate

intervention techniques will reduce the consequences of an
accident and the risks of damage from lack of skill from the
rescuers.

DIPS offers support services to the site HSE structure that, through suitable organizational models,
highly qualified tools and skills, ensures the correct management of emergencies scenarios in confined
spaces or at height.

Our Rescue Teams are composed of highly qualified professionals able to properly handle the initial
phases of the recovery operation by providing for the proper immobilization and mobilization of the
injured within the yard or the industrial environment, guaranteeing a first medical intervention and
stabilization, avoiding damage from lack of skills and coordinating with the Public Rescue Service for any
subsequent hospitalization.

Supporting the HSE structure for prevention purposes is achieved by involving our technicians in the
process of monitoring the work environment, preparation of work permits, verification of individual
protection devices and evacuation devices, handling of preliminary toolboxes and editing of daily
reports related to unsafe acts and conditions detected and corrective actions suggested.

The presence of a Rescue Team during the works adds the value of a coaching on the job, crucial to
ensure effective supervision, operational training of workers, and immediate resolution of specific issues
related to execution of works at height and in confined spaces.

Training Courses

DIPS have professional & skillful trainers, certified from IRATA they can introduce several certified courses,

Training courses include:

 Rope access I, II, and III level.

 Working at height.
 Rescue plan.
 Confined space.
 Lifting Equipment Engineer Association.
 Health & Safety and Environmental Policy

Feb 11, 2020

To: All DIPS
From: Khaled Ramadan – Managing Director

DIPS is a leading company in the field of Non-Destructive Testing (NDT), Lifting Gear Inspection
(LGI), Rope access services, Rope access Training, Dropped Object Survey and Hull gauging. is
committed to improve HSE management system which is appropriate to its purpose and context of
organization throughout the following:

 Comply with all applicable Health, Safety and Environment (HSE) laws, regulations, and
standards.

 A systematic framework of hazard identification and risk assessment through which safe
operations can be managed.
 Commitment of consultation and participation of workers.

 Commitment to provide safe and healthy working condition for the prevention of work-
related to injury and ill-health
 Commitment of protection of the environment including prevention of pollution.

 Set a framework for setting HSE objectives to achieve continual improvement of HSE
management system.

The HSE Policy is communicated within the organization to all levels and made available to
Interested parties. The Policy is periodically reviewed for continuing suitability.

Khaled Ramadan
Managing Director — DIPS

T +2 02 220724126
F +2 02 20724126
www.deltaips.net
HSEP- REV. 02 17 Foad Bedwany 8th district , Nasr City, Cairo, Egypt PC 11765, Nasr City,Cairo-Egypt
 Quality Policy
Feb 11, 2020
To: All DIPS
From: Khaled Ramadan – Managing Director

DIPS is a leading company in the field of Non-Destructive Testing (NDT), Lifting Gear Inspection
(LGI), Rope access services, Rope access Training, Dropped Object Survey and Hull gauging. Is
commitment to Impervo high quality services by developing the quality management system which is
appropriate to the purpose and context of the organization and supports its strategic direction.

DIPS is committed to meeting or exceeding the needs and expectations of all interested parties to
support our quality goals and objectives and to continually improve the effectiveness of our Quality
Management System

DIPS will comply to it quality policy through the achieving the following quality objectives:

 Achieving customer satisfaction by meeting customer requirements.

 Profitable Revenue growth.
 Complying with applicable requirements.
 Plan, Deliver, Verify and adjust business processes to continually
improve our Quality Management System.

DIPS strives to achieve customer satisfaction by preventing non-conformities at all

stages of it’s services, from request to final delivery including risk assessment and action
plan, we also consider hierarchy responsibilities, satisfaction of interested parties,
employees and workplace safety.
By providing reliable, high quality and safe to operate services that are environmentally
sound, we assure our customers’ satisfaction and our continued presence in the market
place.
Top management reviews the quality policy and objectives on a continuous and periodic basis.

This policy will be available to relevant interested parties when required.

Khaled Ramadan
Managing Director — DIPS
T +2 02 220724126
F +2 02 20724126
www.deltaips.net
QP- REV. 1 17 Foad Bedwany 8th district , Nasr City, Cairo, Egypt PC 11765, Nasr City,Cairo-Egypt
 Reference: OC.01 Issue No.7
Date: Sept.02,2021
Khaled Ramadan
Managing Director

ORGANIZATIONAL
CHART
Ahmed Hassan Mohamed Elsayed Mohamed
CHRIS Ahmed
BRADLEY

Financial Manager Warehouse Officer Purchasing Manager

Maher Gamal Ahmed Mohamed Mohamed Elsayed Hala Emam Esraa Tarek
QHSE Coordinator QHSE Manager Operation Manager HR Manager HR Assistant

Moataz Mohy Ahmed El Shaer Mohamed Fouda Alan Forrest

Rope Access Manager R.A Training Manager NDT & Lifting Manager Rope Access Consultant
NICOLAS
COPER Service Specialist
Senior
Specialist
Mohamed Shaban
ORS NDT INSPECTORS
Tech Authority & R.A Trainer

Andrel Vasiliev Assistant

Level 3 Supervisors
R.A Trainer

Mohamed Samy Approved By: Khaled Ramadan – Managing Director

Level 1 & 2 Technicians
R.A Trainer Signature:

Mahmoud Shaban
Tech. Trainees
R.A Trainer Assistant

Page 1 of 1
 ‫ادارة السجل التجاري ‪ -‬شهادة قيد وكالة‬

‫‪01/18/2022‬‬ ‫الكويت في ‪:‬‬

‫بعد الطلع على قانون تنظيم الوكالت التجارية رقم ‪ 13‬لسنة ‪ 2016‬الصادر بتاريخ ‪ 6‬مارس سنة ‪ 2016‬وبعد‬
‫استيفاء جميع البيانات والرسوم المطلوبة بموجب القانون آنف الذكر تم تسجيل‬

‫‪09/01/2022‬‬ ‫تاريخ القيد ‪:‬‬ ‫‪2022/001915‬‬ ‫رقم القيد ‪:‬‬

‫الي ‪31/10/2029 :‬‬ ‫‪01/11/2021‬‬ ‫للمدة من ‪:‬‬
‫السادة ‪ /‬شركه بتروماك للمقاولت العامه للمباني‬

‫دلتا للتفتيش الهندسي والخدمات البتروليه‬ ‫وكيل في الكويت لي ‪:‬‬

‫‪Delta inspection and petroleum services‬‬

‫و الصادر منتجاتة بأسم ‪:‬‬

‫اختبار المواد والمعدات المتعلقه بالنشاءات الهندسيه ‪ -‬دلتا للتفتيش الهندسي والخدمات البتروليه‬

‫‪test all material and equipment related to construction‬‬

‫ملحظات ‪:‬‬

‫مستند الكتروني ل يحتاج الي ختم او توقيع‬

‫‪1/18/2022‬‬ ‫تاريخ الطباعة‪:‬‬ ‫رقم الصفحة‪1 / 1 :‬‬ ‫وزارة التجارة و الصناعة‬

 J,,:411 doWl d.,!,-11 �I
��1, �iH .:.16,.;:Jl � �u->11
,;l:.w�I, �I .:.�,.;:J �->J,..11 �

1- Sucker rod surface, down.hole pumps, rods aud related accessories (supµly and services ).
2- Progressive cavity pumping solutions (rods, pumps, drives 1111d �mto,n:itious). 3- Gas Hft
& plunger lifl services. 4- Cased hole logging. 5- Cementing. 6- Stimulation coiled lubiug
services nud hydnmlic fracturing. 7- Surface nncl down.hole well tcsliug D.S.T / tubing
conveyed pcrformiou (r.C.P) and subsea testing. 8- Complecio11. 9- Lim:r hangur, 10-
Down.holc gauges {reservoir monitoring ;md control). t 1- lnfonnation solutions oilfield
sofhvarc. l2- Dara anrl cousuhiug services. 13- Drilling jars. 14- DriJHug tools (Stabilizers,
roller re.:uuers, hole cufargemeut 1ools ). IS-Turbo drilling .

. (...-,i,""'1 _,,;)I ,J.:.S - u,...11 ,J.:.S - '-fJ-" J,'11 "'""f' - .,....,_'I, .1-,_.,h) ,,.....w, _;..,,LJ1 J..,_, - I
.:,�.,,_'I,-,
.t/t,VU\'l'"I.
, t/T T , V 1' t \ Ti .( RT - UT - MT- PT - VT) .,i-,c, _,.11
-�)1 .:,1 .i.,.,.._l-r
,.
.Lifting inspection by rope :1cccss technique -t

M::umfacturiug oflino pipe. casing, tubing, couplings, pup joints and pipe threaded
as a representative for Cangzhou Ruitai Petrolc11111 Machinery Co. Ltd
ol/'rl/\V\H\
. ',11,,\li\t \
Representative ofHeilougjiaugJianloug lrou and Steel Co. (Of China) without any ,,
previous cxperieuce
n/,o/T•T• U-(VoJ.;11;,1.,,l;>:----IJ,1..!.J;JW.\
----- ----+--------- -+-----------------------..J...----------------------------------1------ --------------

As representative for Al wadi for n1ini11g cornpany for the following activitics:­
,t/tva1v, , Producing beutonite aud different types of calcimn carbonate •without auy previous I!
experiences·.

,T/tttVU,'\
.,.),,.,,...,,,.,!,
�•A .,,...,_,i.,J .:,1,b.ll1 � .,..., ..;..,.s:i,J ...._;1,..-,J (!)' "''-""J (!'J)'J .:,1.....U .,.....w, ..,.,...i,, ._..i, _,:+ell Jw.l
, , ./rrv. rr.,A
""'-:-il' i_;p.� ,.:.A...l:,iJ� i
.J..W1 Jwl 1.\Sj

T, I,/, ,/1, J rlAi• ;,,'ii i>J..., t_ll,;-i,l,-1.tll ;Jl.iJ ;,> ,-,L.oJ1 ./1/fai --� -,JJ;J . .!,ii J'-1.tll ;,> .:,�I ;...i,,­
T • tl/lT/rl J •1'"!

.4-ll ty.)1 .i.., '/I ;.tJ.1 o.l> J� j,....JI JI ;JW,'/� ,1,- IS"_,.:..U .SJ�I J<--1• Jd-' �• j,, e;-·
"
l • l •/• \/t'r C::>l::f ( \ T t)ell it'-- 1k-:::,i Vil':, ,k.W
 Approved
Standard Purchase Order
PO 12623

PO , Rev # 12623 , 0
66 Kornish El Nile Approved Date 30-OCT-2019 12:34:07
Maadi Created by Mr. Youssef El Gaar
Cairo Priority
Egypt

Supplier: Ship to:

No.: 1649 Organization : AD6
Name: Delta Inspection & Petroluem Services Location: ADM-VI
Address: Nasr City Address: , ,
Cairo , Egypt, Egypt
Egypt Bill to:
ADES Egypt - Legal Address
66 Kornish El Nile
Maadi
Cairo,
Egypt
Ship Via FOB Freight Terms Payment Terms
Cash In Advance
Notes: PAYMENT TERM: CASH IN ADVANCE all prices and amounts on this order are expressed in US Dollar (USD)
Unit
Total
Line Item Description Quantity UOM Price
(USD)
(USD)
SR to conduct NDT for the above water part as required by UWILD survey scope

1 Item No: Supplier item: 1 EACH 000000 000000

Promise date: 05-NOV-2019 00:00:00 Need by date:05-NOV-2019 00:00:00

Total (Without Tax) 0000000(USD)

Tax Rate 14%

Please acknowledge receiving and acceptance of the PO by a return e-mail that must include the PO number and the following confirmation:
Notwithstanding anything to the contrary stated elsewhere on P.O. #[12623] or attached hereto, the parties agree that this P.O.'s shall be exclusively governed by
ADES's Terms and Conditions. We undertake and acknowledge that we have read and accepted the Terms and Conditions received from ADES.

1 of 6
 Approved
Standard Purchase Order
PO 12623

THIS SERVICE ORDER / PURCHASE ORDER IS EXPRESSLY CONDITIONED UPON ACCEPTANCE BY SUPPLIER OF THE TERMS
AND CONDITIONS CONTAINED HEREIN

SERVICE ORDER / PURCHASE ORDER TERMS AND CONDITIONS

1.DEFINITIONS.
In these Terms and Conditions ("Conditions"): (A) 'ADES' means (A) The Goods shall be properly packed, marked and delivered at
Advanced Energy Systems (ADES) S.A.E company, or any of its the Supplier's expense in accordance with the Order. ADES shall
affiliates, subsidiaries or branch offices placing the Purchase not accept a charge for packages, containers or freight unless
Order. specified explicitly in the Order.
(B) 'The Supplier' means the person, firm, or company to whom the (B) Each advice note, bill of lading and invoice shall bear the
Purchase Order is addressed. (C) 'The Goods' means the articles, applicable Order number, delivery date and/or date of completion
raw materials or any of them to be supplied by the Supplier to of the Services and the location to which the Goods are to be
ADES pursuant to the Purchase Order (including any materials or delivered or at which the Services are to be provided.
articles supplied in connection with services.) (D) 'The Services' 5. DELIVERY.
means work and/or services or any of them to be performed by the (A) Time is of the essence in the performance by the Supplier of
Supplier for ADES pursuant to the Purchase Order. the Order. If delivery dates for the Goods or the dates for the
(E) 'The Purchase Order or Order' means a service or purchase provision and/or performance of the Services cannot be met, the
order in respect of Goods and/or Services issued by ADES to the Supplier shall promptly notify ADES of the earliest possible date
Supplier on ADES's official purchase order form, together with all for delivery of the Goods or the provision of the Services.
other documents referred to therein. Notwithstanding such notice, and unless a substitute delivery date
for the Goods or date for the provision of the Services has been
2. APPLICATION. expressly agreed by ADES in writing, the Supplier's failure to
These Conditions shall apply to and be incorporated in the effect delivery of the Goods or the provision of Services on the
Purchase Order issued to Supplier for the supply of the Goods date specified shall entitle ADES to cancel the Order without
and/or the Services and shall be in substitution for any oral or liability towards the Supplier, to purchase substitute items or
written arrangements, unless in case there was a written executed services elsewhere, and to recover from the Supplier any loss and
and valid supply agreement in place, made between ADES and the additional costs incurred.
Supplier and shall prevail over any inconsistent terms or conditions (B) If delivery pursuant to the Order is incomplete, ADES reserves
contained in or referred to in the Supplier's quotation or acceptance the right (without prejudice to any of its other rights) to accept or
of order or correspondence or elsewhere or implied by trade, reject the Goods so delivered or Services performed and to cancel
custom or practice or course of dealing. No addition to or variation or vary the balance of the Order.
of or exclusion or attempted of the Purchase Order and/or these (C) The Goods must be delivered at the delivery point specified in
Conditions or any of them shall be binding upon ADES unless the Order. If the Goods are incorrectly delivered, the Supplier will
specifically agreed to in writing and signed by a duly authorized be liable for any additional expense involved in handling and
representative of ADES. delivering them to their correct destination.
3. ACCEPTANCE OF ORDER. 6. WARRANTY.
(A) The Supplier warrants, and it is a condition of the Order, that
All the terms of the Order between ADES and the Supplier are the Goods supplied to ADES under the Order shall be of first class
contained in or referred to in the Order and in these Conditions. materials and workmanship throughout and will meet the
The Supplier's execution or commencement of work or governing specifications referred to in the Order as to quantity,
commencement of delivery pursuant to the Order constitutes quality standards and description; that the design, construction and
acceptance of the Order on the terms hereof by the Supplier. The quality of the Goods will comply in all respects with applicable
acceptance of the Order is limited to and conditional upon laws and regulations and with any samples furnished by the
acceptance by the Supplier of these Conditions. Supplier and accepted by ADES; and that the Goods will be fit and
4. PACKING, MARKING AND DOCUMENTATION suitable for the purpose intended by ADES, of merchantable
quality and free from defect.

2 of 6
Our Main Customers.
Head Office

17 Fouad Bedwany District 8, Nasr City, Cairo, Egypt.

Training venue

DIPS Training venue in 3 Block G, Free Zone, Attaka, Suez

Website: www.deltaips.co

Email: [email protected]

Phone: 01004968478- 01010424216

Kuwait Office / Training Venue

Salem Al Mubarak St. , Soud Al Mutairi Complex , M1 Floor ,

Office 21 ,Salmiya, Kuwait

Website: www.deltaips.co

Email: [email protected]

Phone: 90078311