Er5 | W5 | P1 Synthetic (H)EPA Media

Donaldson’s proprietary Turbo-Tek Er5 | W5 | P1 filter media

EFFICIENCY

Er5 is a premium composite filter media that delivers (H)EPA

Er0 Er1 Er2 Er3 Er4 Er5 filtration efficiency and a water tight barrier. It is durable, pulse
Higher levels of filtration efficiency indicate increased particulate filtration.
survivable, and moisture resistant. The construction of this
TIGHTNESS
WATER

filter media is designed to maximize capacity while minimizing

W5
operating restriction throughout the life of the filter element.
W0 W1 W2 W3 W4 W5
Higher levels of watertightness indicate the ability to resist ingress
and provide a more stable pressure drop when challenged with water.
RECOVERY
PULSE

P1
S P1 P2 P3 P4 P5
Higher levels of pulse recovery indicate stable pressure drop
performance even when faced with challenging dust conditions.

KEY FEATURES APPLICATION RECOMMENDATIONS

• Uses Donaldson’s proprietary (H)EPA media technology

Turbo-Tek Er5 | W5 | P1 media is a synthetic media that
• Captures over 99.5% of most penetrating particle size acts as a barrier to water. It is a premium grade media that
(MPPS) particles, virtually eliminating compressor blade
fouling which results in stable power output and less turbine is designed for most environments where water tightness
maintenance costs throughout the life of the filter
and (H)EPA filtration efficiency is desired. This media can
• Blocks water droplets from passing through the media, be utilized in a wide variety of pulse cleaning and non-pulse
stopping salts and other corrosive water soluble
contaminants from making their way to the turbine. cleaning inlet systems.

• Donaldson’s proprietary Pleatloc design ensures uniform ™

KEY BENEFITS
pleat spacing and contributes to low operating restriction
throughout the life of the filter • Optimal (H)EPA performance

• Extremely durable, resistant to burst at pressures that • Increased output

exceed OEM requirements
• Lower heat rate
• Each filter element includes a precision molded gasket and a
new gasket washer to ensure a robust sealing system. • Reduced blade fouling

• Each element includes a factory installed coalescer sleeve • Watertight filtration in wet and coastal areas
(on and offshore)

• Reduced corrosion

• Reduced long term operating costs

• High dirt loading capacity

G AS T U R B I N E S YS T E M S
 Er5 | W5 | P1 Synthetic (H)EPA Media

Efficiency Pressure Drop

100.0 1.6

1.4
99.9
1.2
Fractional Efficiency (%)

Pressure Drop (”H2O)

1.0
99.8

0.8

99.7
0.6

0.4
99.6

0.2

99.5 0.0
0 0.1 0.2 0.3 0.4 0.5 0.6 0 500 1000 1500 2000 2500
Particel Diameter (µm) Airflow (CFM)

PERFORMANCE DATA PERFORMANCE DATA PERFORMANCE DATA

Testing based on conical/cylindrical element pair at 1630 CFM / 0.77 m /s
3
Efficiency rating is based on conical/cylindrical pair at 630 CFM / 0.77 m /s 2
Testing based on 2,000 CFM / 0.94 m /s
3

EN1822 Rating E12 EN1822 Rating E12 EN1822 Rating E11

ASHRAE 52.2 Rating MERV 16 ASHRAE 52.2 Rating MERV 16 ASHRAE 52.2 Rating MERV 16

Initial Resistance with Initial Resistance with Initial Resistance with

1.15“ wg / 286 Pascal 0.95“ wg / 237 Pascal 1.4“ wg / 349 Pascal
Pre-filter/Coalescer Coalescer Sleeve Coalescer Sleeve

SPECIFICATIONS SPECIFICATIONS SPECIFICATIONS

Cylindrical 160 ft / 14.9 m of media
2 2
Cylindrical 160 ft / 14.9 m of media 2 2
Cylindrical 190 ft / 17.7 m of media
2 2

Conical 195 ft / 18.1 m of media

2 2
Filter Media Synthetic (H)EPA Media Filter Media Synthetic (H)EPA Media

Filter Media Synthetic (H)EPA Media

Other non Donaldson filter configurations are available. All end caps and liners are available in either galvanized or
stainless steel. Contact your sales representative for details.

Important Notice: Many factors beyond the control of Donaldson can affect the use and performance of Donaldson products in a particular application, including the conditions under which the product is used. Since these factors are
uniquely within the user’s knowledge and control, it is essential the user evaluate the products to determine whether the product is fit for the particular purpose and suitable for the user’s application. All products, product specifications,
availability and data are subject to change without notice, and may vary by region or country.

Donaldson Company, Inc. North America India Japan South East Asia Latinoamérica
Gas Turbine Systems +1-800-431-0555 +91-124-4807-400 +81-42-540-4113 +65-6311-7373 +52-449-300-2442
P.O. Box 1299 [email protected] [email protected] [email protected] [email protected] [email protected]
Minneapolis, MN 55440-1299 U.S.A. Australasia Greater China Korea Europe, Mid-East, Africa México
+61-2-4350-2000 +86-21-2313-7027 +82-2-517-3333 +32-16-38-3940 +1-800-343-36-39
donaldson.com [email protected] [email protected] [email protected] [email protected] [email protected]
F117657 (2/20) ©2018-2020 Donaldson Company, Inc. Donaldson, Turbo-Tek and the color blue are marks of Donaldson Company, Inc. All other marks belong to their respective owners.

G AS T U R B I N E S YS T E M S