Scribd
Upload
49 views1 page

AS1454-003 38kV, 250kV BIL, 2inches Stud - Viton Gaskets

This document provides specifications and drawings for a 38kV 250kV BIL bushing assembly for connecting a 2-12 copper conductor. The assembly includes a copper spade and stud with an aluminum clamp and cap. Key specifications include a rated voltage of 38kV, basic impulse level of 250kV, and nominal current rating of 3500A. Revisions to the document removed a pocket dimension and added specification #3.

Uploaded by

Angel Stragliati
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
49 views1 page

AS1454-003 38kV, 250kV BIL, 2inches Stud - Viton Gaskets

This document provides specifications and drawings for a 38kV 250kV BIL bushing assembly for connecting a 2-12 copper conductor. The assembly includes a copper spade and stud with an aluminum clamp and cap. Key specifications include a rated voltage of 38kV, basic impulse level of 250kV, and nominal current rating of 3500A. Revisions to the document removed a pocket dimension and added specification #3.

Uploaded by

Angel Stragliati
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

REVISIONS

REV. DATE ECN # DESCRIPTION BY APPROVED


ADDED SPECIFICATION #3; REMOVED CP
1 8/31/2009 JH JFS
POCKET DIMENSION.

7.00 177.75

5.30 134.62

1.12 28.45
.56 14.22 X .75" SLOTS 6.41 162.81

7.00 177.92

5.30 134.70

7.50 190.50 4.94 125.48


BOLT CIRCLE
.19 4.83 BUSHING TO ROOF GASKET
ROOF MOUNTING FLANGE ONE REQUIRED PER ASSEMBLY
TWO PIECES REQUIRED PER ASSEMBLY MATERIAL: .19" .020" VITON
MATERIAL: ALUMINUM

63.89 1622.86 (REFERENCE ONLY)


7.73 196.34
25.21±.06 640.44±1.52 30.00±.03 762±0.76
(10 SKIRTS)
2.50 63.50 VITON GASKET 5.25 133.35
MINIMUM
1.125 28.58
DAG 213
TYPICAL
.56 14.30
(4 PLACES)

1.75 44.45
4.00 101.60
TYPICAL

4.75 120.65 VITON GASKET 1.75 44.45


TYPICAL
6.62 168.15 ALUMINUM WASHER
2" - 12 UN - 2A THREADS MYLAR TUBE
1.52 38.61 1.38 34.93 .75 19.05
31.52±.25 800.60±6.35
(REF. ONLY) TYPICAL (REF. ONLY)

SPECIFICATIONS:
1. RATED VOLTAGE......................38kV
2. BASIC IMPULSE LEVEL...............250kV
1 3. NOMINAL CURRENT RATING....3500A
4. STRIKE DISTANCE.......................22.00 [558.80] TOP & BOTTOM
5. CREEP DISTANCE (MIN.)...........46.38 [1177.93] TOP & BOTTOM
6. CANTILEVER STRENGTH............200 LBS
7. APPROXIMATE WEIGHT............135.3 LBS
TOLERANCES H-J ENTERPRISES, INC.
MATERIAL: (EXCEPT AS NOTED) 3010 HIGH RIDGE BLVD. HIGH RIDGE, MO. 63049 USA
1. SPADE - COPPER C11000 - TIN PLATED PHONE 1-636-677-3421 FAX 1-636-376-1915
2. STUD - COPPER C11000 - TIN PLATED DECIMAL
3. CLAMP - ALUMINUM 356-T6 OR TENZALLOY PROPRIETARY AND CONFIDENTIAL 38kV 250kV BIL BUSHING ASSEMBLY
+/- .032"/.8mm
4. CAP & WASHER - 6061-T6511 ALUMINUM THE INFORMATION CONTAINED IN THIS
FRACTIONAL
2" - 12 COPPER CONDUCTOR
DRAWING IS THE SOLE PROPERTY OF
PORCELAIN NOTES: H-J ENTERPRISES, INC. ANY
MATERIAL
(SEE DRAWING)
1. WET PROCESS ELECTRICAL PORCELAIN. REPRODUCTION IN PART OR AS A WHOLE +/-
CHK'D APP'D DRAWING NO.
2. GRAY GLAZE MUNSELL 5BG 7.0/0.4
AS1454-003
WITHOUT THE WRITTEN PERMISSION OF ANGULAR
3. TOLERANCE 3% WITH NOTHING LESS THAT .03", UNLESS OTHERWISE NOTED ON DRAWING. H-J ENTERPRISES, INC. IS DRAWN BY DATE SCALE
PROHIBITED. +/- 2 Degrees JH 8/28/2009 N.T.S.

You might also like