EMC Series

3030 Series Datasheet

Features & Benefits

 Package: 3.0*3.0*0.55mm (Top view white LED)
 Emitted Color: White
 Soldering methods: All SMT assembly methods

Typical Application:
 TV backlight

Copyright ©2016 Jufei Optoelectronics All Rights Reserved www.jfled.com.cn

 01.JB.VK3030W65N00

Table of Contents

1.Absolute Maximum Ratings(Ta=25℃) ................................................................................................................3

2.Electrical-optical characteristics(Ta=25℃) .........................................................................................................3

3.Corresponding to the different current Flux ........................................................................................................3

4. Product Binning......................................................................................................................................................4

5.Package Outline Dimension..................................................................................................................................7

6.Tapping specifications (Units: mm)......................................................................................................................8

7.Package Method:(unit:mm) ...................................................................................................................................8

8.Label description：.................................................................................................................................................8

9.Typical Electro-Optical Characteristics Curves ................................................................................................10

10.Reliability test items and conditions: ...............................................................................................................13

11.Precautions for use ............................................................................................................................................13

Copyright ©2016 Jufei Optoelectronics All Rights Reserved Ver. A0 Page 2 of 17

 01.JB.VK3030W65N00
1.Absolute Maximum Ratings(Ta=25℃)

Parameter Symbol Rating Unit

Power Dissipation Pd 2730 mW
Forward Current IF 700 mA
Peak Forward Current IFP 1000 mA
Junction Temperature Tj ≦120 ℃
Thermal Resistance Rth 8 ℃/W
Soldering Temperature Tsol Reflow soldering (260 for 10seconds) ℃
Hand soldering (300 for 3 seconds)
Operating Temperature Topr -40℃~+100℃ -
Storage Temperature Tstg -40℃~+100℃ -
＊ IFP condition: pulse width ≤0.1msec, duty cycle ≤1/10.

2.Electrical-optical characteristics(Ta=25℃)

Parameter Symbol Min. Typ. Max. Unit Condition

Forward Voltage Vf 3.0 3.4 3.9 V
Luminous Flux Φ 145 155 200 Lm
Viewing Angle 2θ1/2 - 120 - deg
IF=500mA
Luminous Efficiency η 95 - Lm/W
X 0.27
Chromaticity coordinates
Y 0.25
Reverse Current IR - - 1 μA VR=5V

3.Corresponding to the different current Flux

IF(mA) Flux(lm) lm/W VF(V)

400 143.7 107.56 3.34
500 170.0 100.00 3.40
600 191.4 92.46 3.45

Notes:
 Luminous flux measurement tolerance: ±5%.
 The data of luminous flux measured under the MCPCB at 25℃.
 Typical luminous flux or light t performance is operated within the condition guided by this datasheet.

Copyright ©2016 Jufei Optoelectronics All Rights Reserved Ver. A0 Page 3 of 17

 01.JB.VK3030W65N00

4. Product Binning

a).Luminous flux (If=500mA,tolerance is ±5%)

BIN code Min (lm) Max (lm)
13A 130 135
13B 135 140
14A 140 145
14B 145 150
15A 150 155
15B 155 160
16A 160 165
16B 165 170
17A 170 175
17B 175 180
18A 180 185
18B 185 190
19A 190 195
19B 195 200
20A 200 205
20B 205 210

b).Forward voltage (IF=500mA,tolerance is ±0.1V)

BIN Code Min (V) Max (V)
30 3.0 3.2
32 3.2 3.4
34 3.4 3.6

c).Chromaticity coordinates specifications(If=500mA,tolerance is ±0.005)

Chromaticity coordinates

BIN X Y BIN X Y
0.2606 0.2233 0.2645 0.2310
0.2645 0.2310 0.2683 0.2387
T01 T02
0.2674 0.2231 0.2712 0.2308
0.2635 0.2154 0.2674 0.2231
0.2683 0.2387 0.2722 0.2464
0.2722 0.2464 0.2760 0.2541
T11 T12
0.2751 0.2385 0.2789 0.2462
0.2712 0.2308 0.2751 0.2385
0.2760 0.2541 0.2799 0.2618
T21 T22
0.2799 0.2618 0.2838 0.2695

Copyright ©2016 Jufei Optoelectronics All Rights Reserved Ver. A0 Page 4 of 17

 01.JB.VK3030W65N00
0.2828 0.2539 0.2867 0.2616
0.2789 0.2462 0.2828 0.2539
0.2838 0.2695 0.2877 0.2772
0.2877 0.2772 0.2915 0.2849
T31 T32
0.2906 0.2693 0.2944 0.2770
0.2867 0.2616 0.2906 0.2693
0.2638 0.2217 0.2674 0.2285
0.2674 0.2285 0.2710 0.2353
H11 H12
0.2703 0.2204 0.2739 0.2272
0.2667 0.2136 0.2703 0.2204
0.2710 0.2353 0.2746 0.2421
0.2746 0.2421 0.2782 0.2489
H21 H22
0.2775 0.2340 0.2811 0.2408
0.2739 0.2272 0.2775 0.234
0.2782 0.2489 0.2818 0.2557
0.2818 0.2557 0.2854 0.2625
H31 H32
0.2847 0.2476 0.2883 0.2544
0.2811 0.2408 0.2847 0.2476
0.2477 0.2149 0.2509 0.2209
0.2509 0.2209 0.2540 0.2268
G1 G2
0.2538 0.2128 0.2569 0.2188
0.2506 0.2068 0.2538 0.2128
0.2540 0.2268 0.2572 0.2328
0.2572 0.2328 0.2603 0.2387
I1 I2
0.2601 0.2248 0.2632 0.2308
0.2569 0.2188 0.2601 0.2248
0.2603 0.2387 0.2642 0.2461
0.2642 0.2461 0.2681 0.2535
K1 K2
0.2671 0.2383 0.2710 0.2457
0.2632 0.2308 0.2671 0.2383
0.2489 0.2002 0.2528 0.2079
0.2528 0.2079 0.2567 0.2156
TH1 TH2
0.2557 0.2 0.2596 0.2077
0.2518 0.1923 0.2557 0.2000
0.2567 0.2156 0.2606 0.2233
0.2606 0.2233 0.2645 0.2310
TJ1 T01
0.2635 0.2154 0.2674 0.2231
0.2596 0.2077 0.2635 0.2154

CIE1931 xy

Copyright ©2016 Jufei Optoelectronics All Rights Reserved Ver. A0 Page 5 of 17

 01.JB.VK3030W65N00

Copyright ©2016 Jufei Optoelectronics All Rights Reserved Ver. A0 Page 6 of 17

 01.JB.VK3030W65N00
5.Package Outline Dimension

Notes:
 All dimensions are in millimeters (inches).
 Tolerance is ±0.10mm unless otherwise specified.
 Gewicht/Approx.weight:15.0±0.5mg.

Copyright ©2016 Jufei Optoelectronics All Rights Reserved Ver. A0 Page 7 of 17

 01.JB.VK3030W65N00
6.Tapping specifications (Units: mm)

7.Package Method:(unit:mm)

Label Moisture-proofbag

8.Label description：

深圳市聚飞光电股份有限公司 ⑧
SHENZHEN JUFEI OPTOELECTRONICS CO.,LTD.
型号：01.JB.VK3030W65N00① BIN 盒：125
Bin：16A/E5/33② QTY：4000 pcs③
生产日期：130609④ 批次：20150702920⑤
A20150702920E08BKA14100F1026K0BA/0/150709/1/4914⑥

入库： 检验：⑦

Copyright ©2016 Jufei Optoelectronics All Rights Reserved Ver. A0 Page 8 of 17

 01.JB.VK3030W65N00
a） Label description

①Product Type
②Product Bin
③Quantity
④Produce Date
⑤Produce Batch
⑥Product Tracing Num
⑦Proof-test Seal
⑧RoHS Sign

b） Part Number System description

X1X2.X3X4.X5X6X7X8X9X10X11X12X13X14X15
Part Number Code Description Part Number Value
X1X2 Production Type 01 Self-produce
X3 Company J JF
X4 Applications B Backlight
X5 Chip Type V Twin parallel zener
X6 Power Range K 1.7W
X7-X10 Product Size 3030 3.0mm*3.0mm
X11 Emitting Color W Cold white
X12X13 Color Gamut 65 NTSC 65+
X14 Patent N --
X15 Water code 00 --

c) BIN description

X1 / X 2 / X 3

Forward voltage B I N C O D E

Chromaticity coordinates B I N C O D E

Luminous flux B I N C O D E

Copyright ©2016 Jufei Optoelectronics All Rights Reserved Ver. A0 Page 9 of 17

 01.JB.VK3030W65N00
9.Typical Electro-Optical Characteristics Curves

Copyright ©2016 Jufei Optoelectronics All Rights Reserved Ver. A0 Page 10 of 17

 01.JB.VK3030W65N00

Copyright ©2016 Jufei Optoelectronics All Rights Reserved Ver. A0 Page 11 of 17

 01.JB.VK3030W65N00

Typical radiation pattern in Polar coordinate system

-10° 0° 10°
-20° 20°

-30° 30°

-40° 40°

-50° 50°

-60°
60°

-70°
70°

-80° 80°

-90° 90°
1 0.5 0 0.5 1

Copyright ©2016 Jufei Optoelectronics All Rights Reserved Ver. A0 Page 12 of 17

 01.JB.VK3030W65N00
10.Reliability test items and conditions:

No. Test Item Applicable Standard Test Conditions Sample size Ac/Re
Test If=DC600mA
Temp:25℃
1 Operation Life JESD22 A108-C 22 0/1
PinTemperature：≤70℃
Test time=1000hrs
Temp. =+65℃
High Temperature
2 JEITAED-4701 100 103 RH=90% 22 0/1
High Humidity
Test time=240hrs
-40℃～+100℃
3 Thermal Shock MIL-STD-202G 20min 10s 20min 22 0/1
Test Time=100 cycles
High Temperature High Temp. =+100℃
4 JEITAED-4701 200 201 22 0/1
Storage Test time=1000hrs
Low Temperature Low Ta=-40℃
5 JEITAED-4701 200 202 22 0/1
Storage Test time=1000hrs
-40℃～+100℃
Temperature
6 JEITAED-4701 100 105 60min 20min 60min 22 0/1
Cycle
Test Time=20cycles
Operation heating：
7 Reflow Soldering JEITAED-4701 300 301 260 ℃ (Max.),within 22 0/1
10seconds.(Max.)
※Judgment criteria of failure for the reliability
·Flux: Below 70% of initial values
·Vf: Over 20% of upper limit value

Note:
 Measurement shall be taken within 2 hours
 The tested LED have been returned to normal ambient conditions before testing.

11.Precautions for use

11.1 Soldering
SMD LED encapsulation is very flexible, outside force easily demolish radiant surface and plastic,
As soldering , Please handle with care!
a. With No-clean Flux, according to reflow soldering cure condition when soldering, Reflow soldering
should not be done more than two times, simultaneity you must insure clean on the radiant surface.
Otherwise, foreign objects can affect radiant color.
b. Don’t process manual soldering except repair. Recommended to be soldered with 25W Anti-static
iron, The temp. of the iron should be lower than 300℃ and soldering time should not be done
more than three seconds, at the same time iron can’t touch radiant surface and plastic.
c. Don’t twist LED in course of manual soldering and experiment, Otherwise, the lights will not work
possibly.
d. Please use the same BIN grade in one panel, and don’t mix the difference BIN grade in one panel
when soldering. Otherwise, it will cause a serious uneven color problem.
e. Please control the sulfur content of solder paste and PCB.

Copyright ©2016 Jufei Optoelectronics All Rights Reserved Ver. A0 Page 13 of 17

 01.JB.VK3030W65N00
f. Pb-free solder temp.-time profile as below:260℃Max.

300

Tp：260℃
250
Ramp-up:3℃/sec.max
TL：217℃
Tsmax：200℃ tp:10-30sec.30sec max.
Temperature(℃）

200

Tsmin：150℃
150

ts：60-120sec. ts：60-150sec.max
100

50

0
0 50 100 150 200 250 300
Time（second）

Profile Feature Lead Free Assembly

Temperature min（Tsmin） 150℃
Temperature max(Tsmax) 200℃
Maximum time (ts)from Tsmin to Tsmax 120 seconds
Ramp-up(TL to TP) 3℃/sec
Liquids Temperature(TL) 217℃
Maximum Time(tL) Maintained TL 150 seconds
Maximum Peak Package Body 260℃
Temperature(Tp)
Time Within 5℃ of the Specified Temperature 10-30seconds
Maximum Ramp-Down Rate(Tp to TL) 6℃/seconds
Maximum Time 25℃ to Peak Temperature 8minutes

11.2 Cleaning
a. Don’t be cleaned with ultrasonic. Recommended to be wiped with isopropyl alcohol or pure alcohol,
wiping time should not be more than one minute. LED must be placed at room temperature for
fifteen minutes before producing .you must insure clean on the radiant surface. Otherwise, foreign
objects can affect radiant color.

Copyright ©2016 Jufei Optoelectronics All Rights Reserved Ver. A0 Page 14 of 17

 01.JB.VK3030W65N00

b. LED can’t be in contact with acetate、trichloroethylene，acetone、sulfur、nitride、acid、alkali、salt.

These matters can destroy LED.
11.3 Sealing
a. Sealing glue can’t contain sulfur，because these matter can affect fluorescence powder poisoning.
b. When using normal sealing glue, recommended will be operated life for 168hrs under normal
temperature.
11.4 Storage
a. Don’t open the moisture proof bag before ready to use the LEDs.
b. The LEDs should be kept at 30℃ or less and 60%RH or less before opening the package. The
max. period before opening the package is 1 year.
c. After opening the package, the LEDs should be kept at 30-35%RH or less, and it should be used
within 3 days. If the LEDs should be kept at 30-35%RH or more, and it should be used within 4
hours.
d. If the LEDs be kept over the conditions of 20%, baking is required before mounting. Baking
condition as below: 70±5℃ for 12 hours for bulk goods, 105±5℃ for 1 hours for roll goods.
e. The environment have no acid、alkali、corrosive gas、intensively shake and high magnetic field.
11.5 Static
a. Static and Peak surge voltage can destroy LED, Avoiding Instantaneous voltage when turn on or
turn off the lights.
b. Please wear Anti-static wrist band、Anti-static glove、Anti-static shoes in the course of operation,
and the equipment must be grounded.
c. After LED is be destroyed, leakage current increase obviously, and it will be forward voltage falling
or failure lamp in the case of low current.

11.6 Test
a. Customer must apply the current limiting resistor in the circuit so as to drive the LEDs within the
rated current. Otherwise slight voltage shift maybe will cause big current change and burn out will
happen.
b. Also, caution should be taken not to overload the LEDs with instantaneous high voltage at the
turning ON and OFF of the circuit. Otherwise LED will be destroyed, testing methods as follows:

c. The reverse voltage mustn’t exceed 5v when lighting on or testing the LED, otherwise,
LEDs will be damaged.
Copyright ©2016 Jufei Optoelectronics All Rights Reserved Ver. A0 Page 15 of 17
 01.JB.VK3030W65N00
11.7 Else
Radiant color of LEDs will be a little change with the current, recommended that LED is be used in
series and resistance, when lighting, please don’t see directly radiant surface of LED, otherwise LED
will burn eyes.

Copyright ©2016 Jufei Optoelectronics All Rights Reserved Ver. A0 Page 16 of 17

 01.JB.VK3030W65N00

Revision History
Version:
Created by：
Page Subjects(major change in previous version) Date of change

About Jufei@
The company production plant to the implementation of 10,000 purification, temperature and humidity, anti-static, the company

introduced the most advanced SMD LED automatic production equipment, strict real integrated management system of

ISO9001/TS16949, QC080000, ISO14001, OHSAS18001, and passed the CQC third-party certification; products by SGS, fully

comply with the ROHS / REACH / halogen-free product environmental requirements. Jufei cost photoelectric LED products,

widely recognized by the customers, has become the top ten brands of Chinese LED industry market customer satisfaction,

and received the title of "Shenzhen Top Brand".

Address:No.4, Eling Industrial Area, Egongling Community, Pinghu Street, Longgang District, Shenzhen
Web：http://www.jfled.com.cn

Tel：0755-29632280/29632290

Fax：0755-29632282/29632285

Copyright ©2016 Jufei Optoelectronics All Rights Reserved Ver. A0 Page 17 of 17