Repair Parts

Manual

Manufactured 02-01 and after

P/N 0153286
February 2001 - revised December 2001
 General Information

About this manual:

This repair parts manual covers current production ma- NPT . . . . . . . . . . . . . . . . . . . . . . national pipe thread
chines only. psi . . . . . . . . . . . . . . . . . . . . . pounds per square inch
qty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .quantity
While Snorkel has attempted in every way to confirm
UL . . . . . . . . . . . . . . . Underwriters Laboratories Inc.
that all information in this manual is correct, improve-
ments are being constantly made to the machine that
may not be reflected in this manual.
If you find information in this manual that is not correct, Electrical Hazard
or is confusing, you are urged to report your findings to
Snorkel for our evaluation.
DANGER
The aerial platform is not electrically insulated.
Your input is important to us and will be used in future Death or serious injury can result from contact with,
printings of this manual. or inadequate clearance from, an energized
Every person who repairs this machine must be quali- conductor.
fied and authorized to do so. Do not go closer than the minimum safe approach
distance as defined by the minimum Safe Approach
CAUTION Distance as defined by ANSI Standards.
DO NOT modify this aerial platform without prior
written consent of Snorkel Engineering Depart- Regard all conductors as energized.
ment. Modification may void the warranty, adversely Allow for electrical wire sag and aerial platform sway.
affect stability, or affect the operational characteris-
If the work platform, or any part of the aerial platform
tics of the aerial platform.
contacts a high-voltage electrical conductor, the entire
This machine is covered by a limited warranty that spe- machine can become electrically charged.
cifically identifies items warrantied by Snorkel and those
If that happens, remain on the machine and do not con-
items covered by original manufacturers warranty.
tact any other structure or object. This includes the
A copy of the Snorkel Limited Warranty is located on the ground, adjacent buildings, poles, and any other objects
inside of the back cover of this manual. that are not part of the aerial platform.
All correspondence relative to this machine, such as Such contact could make your body a conductor to the
field reports, discrepancy reports, requests for informa- other object, creating an electrical shock hazard result-
tion, etc., should be directed to: ing in death or serious injury.
Snorkel International, Inc. If an aerial platform is in contact with an energized con-
P.O. Box 1160 ductor the platform operator must warn ground person-
St. Joseph, MO 64502-1160 USA nel in the vicinity to stay away. Their bodies can conduct
Phone: (816)-364-0317 electricity creating an electrical shock hazard resulting
http://www.snorkelusa.com in death or serious injury.
Do not approach or leave the aerial platform until the
Abbreviations electricity has been turned off.

The following abbreviations may be used in this manual: Do not attempt to operate the lower controls when the
work platform or any part of the aerial platform is in con-
AC. . . . . . . . . . . . . . . . . . . . . . . . . alternating current tact with a high-voltage electrical conductor or if there is
ANSI . . . . . . . American National Standards Institute an immediate danger of such contact.
CCA. . . . . . . . . . . . . . . . . . . . . . . cold cranking amps
cm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .centimeter Personnel on or near an aerial platform must be continu-
DC. . . . . . . . . . . . . . . . . . . . . . . . . . . . .direct current ously aware of electrical hazards, recognizing that
EMS . . . . . . . . . . . . . envelope management system death or serious injury can result from contact with an
GFCI . . . . . . . . . . . . . . . . ground fault circuit interrupt energized conductor.
LP . . . . . . . . . . . . . . . . . . . . . . . . . liquified petroleum
LPG . . . . . . . . . . . . . . . . . . . . liquified petroleum gas
mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .millimeters
ft . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .feet
in . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .inch
lbs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .pounds
no . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .number

© Snorkel – all rights reserved Printed in USA

 Table of Contents

Service and parts information Cylinder, boom lift - GBI . . . . . . . . . . . . . . . . . . . . 2-30

To order service or repair parts . . . . . . . . . . . . . . . . . . i Cylinder, boom lift - Green . . . . . . . . . . . . . . . . . . 2-31
ANSI and OSHA compliance . . . . . . . . . . . . . . . . . . . . i Cylinder, boom lift - Seabee . . . . . . . . . . . . . . . . . 2-32
Manuals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .i Cylinder, boom lift - Rosenboom . . . . . . . . . . . . . . 2-33
Parts order form . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ii Cylinder, extension - GBI . . . . . . . . . . . . . . . . . . . 2-34
Cylinder, extension - Rosenboom . . . . . . . . . . . . . 2-35
Master level cylinder . . . . . . . . . . . . . . . . . . . . . . . 2-36
Section 1. - Repair parts Cylinder, master level - Green. . . . . . . . . . . . . . . . 2-37
Chassis/turntable mounting. . . . . . . . . . . . . . . . . . . 1-2 Cylinder, master level - Prince . . . . . . . . . . . . . . . 2-38
Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-3 Cylinder, master level - Rosenboom . . . . . . . . . . . 2-39
Steering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-4 Slave level cylinder . . . . . . . . . . . . . . . . . . . . . . . . 2-40
Swing drive mounting . . . . . . . . . . . . . . . . . . . . . . . 1-7 Cylinder, slave level - GBI . . . . . . . . . . . . . . . . . . . 2-41
Fuel tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-8 Cylinder, slave level - Prince . . . . . . . . . . . . . . . . . 2-42
Hydraulic oil reservoir mounting . . . . . . . . . . . . . . . 1-9 Cylinder, slave level - Texas . . . . . . . . . . . . . . . . . 2-43
Booms mounting . . . . . . . . . . . . . . . . . . . . . . . . . . 1-10 Cylinder, steering - Texas . . . . . . . . . . . . . . . . . . . 2-44
Upper boom and hose carrier . . . . . . . . . . . . . . . . 1-12 Dual counterbalance valve, Fluid Tech . . . . . . . . . 2-45
Upper boom. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-15 Emergency power pump . . . . . . . . . . . . . . . . . . . . 2-46
Hose carrier. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-16 Flow divider, Fluid Tech . . . . . . . . . . . . . . . . . . . . . 2-47
Extend cylinder before 7-11-01 . . . . . . . . . . . . . . . 1-18 Gear flow divider . . . . . . . . . . . . . . . . . . . . . . . . . . 2-48
Extend cylinder after 7-11-01 . . . . . . . . . . . . . . . . 1-19 High-low speed valve . . . . . . . . . . . . . . . . . . . . . . 2-49
Platform, gravity gate . . . . . . . . . . . . . . . . . . . . . . 1-20 Hydraulic motor and brake . . . . . . . . . . . . . . . . . . 2-50
Platform, swinging gate . . . . . . . . . . . . . . . . . . . . . 1-23 Hydraulic oil reservoir . . . . . . . . . . . . . . . . . . . . . . 2-51
Platform rotation gear box, Hub City . . . . . . . . . . . 1-24 Hydraulic drive motor, steering . . . . . . . . . . . . . . . 2-52
Chassis cowling. . . . . . . . . . . . . . . . . . . . . . . . . . . 1-26 Hydraulic drive motor, drive. . . . . . . . . . . . . . . . . . 2-54
Turntable cowling. . . . . . . . . . . . . . . . . . . . . . . . . . 1-28 Hydraulic oil return filter . . . . . . . . . . . . . . . . . . . . 2-56
Engine mounting, Ford gasoline . . . . . . . . . . . . . . 1-30 Hydraulic pump and fittings. . . . . . . . . . . . . . . . . . 2-57
Engine, Ford gasoline . . . . . . . . . . . . . . . . . . . . . . 1-33 Sense line dump valve . . . . . . . . . . . . . . . . . . . . . 2-58
Engine mounting, Kubota diesel . . . . . . . . . . . . . . 1-36 Solenoid valve, high-low shift . . . . . . . . . . . . . . . . 2-59
Engine, Kubota diesel . . . . . . . . . . . . . . . . . . . . . . 1-39 Transmission valve package, Fluid Tech . . . . . . . . 2-60
Air cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-41 Pressure switch . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-61
Placards and decals . . . . . . . . . . . . . . . . . . . . . . . 1-42
Gear hub, drive - Auburn . . . . . . . . . . . . . . . . . . . . 1-44
Section 3. - Electrical
Gear hub, steer - Auburn. . . . . . . . . . . . . . . . . . . . 1-46
Swing drive, Perfection . . . . . . . . . . . . . . . . . . . . . 1-48 Chassis electrical, Ford . . . . . . . . . . . . . . . . . . . . . . 3-2
Tires and wheels . . . . . . . . . . . . . . . . . . . . . . . . . . 1-50 Chassis electrical, Kubota. . . . . . . . . . . . . . . . . . . . 3-5
Turntable electrical, Ford . . . . . . . . . . . . . . . . . . . . 3-6
Turntable electrical, Kubota. . . . . . . . . . . . . . . . . . . 3-9
Section 2. - Hydraulics Platform electrical . . . . . . . . . . . . . . . . . . . . . . . . . 3-10
Chassis hydraulic equipment . . . . . . . . . . . . . . . . . 2-2 Wiring box, Ford . . . . . . . . . . . . . . . . . . . . . . . . . . 3-12
Chassis hydraulic hoses . . . . . . . . . . . . . . . . . . . . . 2-5 Wiring box, Kubota . . . . . . . . . . . . . . . . . . . . . . . . 3-15
Turntable hydraulic equipment . . . . . . . . . . . . . . . . 2-6 Wiring box panel, Ford . . . . . . . . . . . . . . . . . . . . . 3-16
Turntable hydraulic hoses . . . . . . . . . . . . . . . . . . . . 2-7 Wiring box panel, Kubota . . . . . . . . . . . . . . . . . . . 3-19
Booms hydraulic equipment . . . . . . . . . . . . . . . . . . 2-8 Upper control box, Ford. . . . . . . . . . . . . . . . . . . . . 3-20
Package valve, Vickers . . . . . . . . . . . . . . . . . . . . . 2-11 Upper control box, Kubota. . . . . . . . . . . . . . . . . . . 3-24
Control valve package, Vickers . . . . . . . . . . . . . . . 2-12 Engine gauge panel, Ford . . . . . . . . . . . . . . . . . . . 3-27
Add-on valve, Vickers . . . . . . . . . . . . . . . . . . . . . . 2-14 Engine gauge panel, Kubota . . . . . . . . . . . . . . . . . 3-32
Control valve, drive . . . . . . . . . . . . . . . . . . . . . . . . 2-15 Platform foot switch . . . . . . . . . . . . . . . . . . . . . . . . 3-35
Drive control valve . . . . . . . . . . . . . . . . . . . . . . . . . 2-16 Boom switch, Ford. . . . . . . . . . . . . . . . . . . . . . . . . 3-36
Transmission valve . . . . . . . . . . . . . . . . . . . . . . . . 2-18 Boom switch, Kubota. . . . . . . . . . . . . . . . . . . . . . . 3-37
AC generator valve . . . . . . . . . . . . . . . . . . . . . . . . 2-20 Steer switch, left hand . . . . . . . . . . . . . . . . . . . . . . 3-38
Accumulator, chassis. . . . . . . . . . . . . . . . . . . . . . . 2-21 Steer switch, right hand. . . . . . . . . . . . . . . . . . . . . 3-39
Accumulator, turntable . . . . . . . . . . . . . . . . . . . . . 2-22 Power to Platform, 125 volt . . . . . . . . . . . . . . . . . . 3-40
Check valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-23 Controller, drive . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-42
Lower boom lift cylinder. . . . . . . . . . . . . . . . . . . . . 2-24
Cylinder, lower boom lift - Rosenboom . . . . . . . . . 2-25
Section 4. - Factory installed options
Cylinder, lower boom lift - Texas . . . . . . . . . . . . . . 2-26
Middle boom lift cylinder before 5-09-2001. . . . . . 2-27 Hydraulic AC generator . . . . . . . . . . . . . . . . . . . . . . 4-2
Middle boom lift cylinder after 5-09-2001 . . . . . . . 2-28 AC generator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-7
Upper boom lift cylinder . . . . . . . . . . . . . . . . . . . . 2-29 Airline to platform . . . . . . . . . . . . . . . . . . . . . . . . . . 4-8

UNO41 – 02-01 and after

 Table of contents

Driving lights and tail lights . . . . . . . . . . . . . . . . . . 4-11

Dual fuel, Ford . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-12
Dual fuel engine, Ford . . . . . . . . . . . . . . . . . . . . . . 4-15
LP fuel only, Ford. . . . . . . . . . . . . . . . . . . . . . . . . . 4-16
LP fuel engine, Ford . . . . . . . . . . . . . . . . . . . . . . . 4-19
Engine block heater. . . . . . . . . . . . . . . . . . . . . . . . 4-20
Lanyard anchor, platform floor . . . . . . . . . . . . . . . 4-21
Motion alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-22
Operator horn . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-23
Tool tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-24
Tow package . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-26
Warning lights . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-28
Work lights. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-31
Upper control box cover . . . . . . . . . . . . . . . . . . . . 4-32

UNO41 – 02-01 and after

 Service and parts information

To order service or repair parts Manuals

When placing an order for service or repair parts, please Manuals are available from Snorkel to support any of the
have the following information available for your ma- machines that we produce.
chine.
The specific manuals for UNO41 are as follows:
ü Machine model number
ü Operator’s Manual
ü Machine serial number Snorkel part number - 0153289
ü Snorkel part number ü Repair Parts Manual
Snorkel part number - 0152875
ü Description of part
ü ANSI Manual of Responsibilities
ü Quantity of parts required ANSI/SIA A92.5-1992
ü Your purchase order number
ü Address for order to “Ship To”
ü Your desired shipment method
The parts order form on the following page may be
mailed or faxed to the attention of Parts Worldwide at the
following location:
Snorkel International, Inc.
P.O. Box 1160
St. Joseph, MO 64502-1160 USA
Phone: 1-(800)-255-0317
Parts Worldwide Fax: (816)-364-6312
Attention: Parts Department
For your convenience, our electronic on-line ordering
system is available at the following Internet location:
http://www.omniquip.com

ANSI and OSHA compliance Record machine information here:

All owners and users of the aerial platform must read,
understand, and comply with all applicable regulations. Model number
Ultimate compliance to OSHA regulations is the respon-
sibility of the user and their employer.
ANSI publications clearly identify the responsibilities of Serial number
all personnel who may be involved with the aerial plat-
form. A reprint of the “Manual of Responsibilities for
Dealers, Owners, Users, Operators, Lessors and Les-
sees of ANSI/SIA A92.5-1992 Boom-Supported Ele- Date of purchase
vating Work Platforms” is available from Snorkel dealers
or from the factory upon request.
Copies are also available from: Purchased from
Scaffold Industry Association
20335 Ventura Blvd. Suite 310
Woodland Hills, CA 91364-2471 USA
Snorkel dealer or distributor

UNO41 – 02-01 and after i

 Parts order form

Fill out completely and fax to (816)-364-6312 attention: Parts Worldwide

Date Model
Company Serial number
Address Optional equipment
Purchase order number
Contact name Ship to
Phone number
Fax number
Account number
Purchase order number Ship by

Part number Description Quantity Price

Note: Backordered parts will be shipped as soon as available by the same shipping method
as the original order unless indicated below:
Ship complete order only - do not backorder parts.
Ship all available parts and supply information of disposition of backordered parts.
Other instructions as specified

ii UNO41 – 02-01 and after

 Section 1. - Repair parts

UNO41 – 02-01 and after 1-1

 Chassis/turntable mounting
item part no qty description
1 1 Chassis - (consult factory)
2 1 Turntable - (consult factory)
3 0150059 1 Rotation bearing
4 5560201 18 Capscrew 5/8-11 x 2-1/2 inch long locking hex head grade 8
5 5560169 41 Washer 5/8 hard flat ASTM-F436
6 5560051 23 Capscrew 5/8-11 self locking
7 5570001 1 Grease fitting, 1/8 NPT straight
8 5037102 1 Bulkhead connector
9 5074401 1 Bulkhead locknut
10 0070769 1 1/4 inch hydraulic hose
11 5038702 1 Male 45° elbow
12 0073492 1 Decal, rotate while greasing

6
5

12

2
9
10
11 3

5
4

AWM00309

1-2 UNO41 – 02-01 and after

 Drive
item part no qty description
1 0151751-99 2 Hydraulic motor and brake - (see page 2-50 for parts breakdown)
2 7280058 16 Wheel bolt 5/8-18 x 1-3/4 inch long
3 5560180 16 Nut 5/8-18 self locking
4 5560678 16 Washer 5/8 medium flat
5 5035303 4 Straight thread 90° elbow
6 5035305 2 Straight thread 90° elbow
7 5035316 4 Straight thread 90° elbow
8 5036705 1 Swivel nut run tee
9 0151588-99 2 Gear hub, drive - (see page 1-44 for parts breakdown)
10 7110155 2 O-ring
11 971009 2 Capscrew 1/2-13 x 4 inch long hex head grade 5
12 987139 2 Washer 1/2 medium lock

9
7 3
1 7 5 5 4 2

5
11
11 12
6
5
7
6
8

AW0151750

UNO41 – 02-01 and after 1-3

 Steering
item part no qty description
1 0151589-99 2 Gear hub, steer - (see page 1-46 for parts breakdown)
2 6030031-99 2 Hydraulic drive motor, steering - (see page 2-52 for parts breakdown)
3 0151591-99 1 Steer yoke, left hand
4 0151592-99 1 Steer yoke, right hand
5 0150216-99 2 Cylinder, steering - (see page 2-44 for parts breakdown)
6 0151604-99 1 Tie rod
7 0151602-99 1 Tie rod end
8 1 Tires and wheels - (see page 1-50 for selection)
9 0110320 2 Lock pin
10 5035318 4 Straight thread 90° elbow
11 5035316 4 Straight thread 90° elbow
12 5035303 2 Straight thread 90° elbow
13 5075205 2 Hex head plug
14 5037005 2 Swivel nut 90° elbow
15 0101028 4 Pin
16 0101321-99 4 Keeper plate
17 0151653-99 2 Pin guard
18 2502229 4 Bearing
19 2580001 2 Thrust bearing
20 5570001 2 Grease fitting, 1/8 NPT straight
21 0080348 2 Spacer, tie rod mounting
22 2690001 2 Bearing, self aligning
23 0151607 2 Pin
24 5560152 6 Roll pin 5/16 inch diameter x 1-3/4 inch long
25 0150095 2 Pin
26 7110155 2 O-ring
27 5560154 4 Capscrew 1/2-13 x 1-3/4 inch long hex head grade 8
28 5560180 16 Nut 5/8-18 self locking
29 7280058 16 Wheel bolt 5/8-18 x 1-3/4 inch long
30 5560169 16 Washer 5/8 hard flat ASTM-F436
31 987139 4 Washer 1/2 medium lock
32 5560688 1 Machine bushing 2-1/4 inch OD x 1-1/2 inch ID x 14 gauge thick
33 970449 12 Capscrew 3/8-16 x 3/4 inch long hex head grade 5
34 987119 12 Washer 3/8 medium lock
35 970229 2 Capscrew 5/16-18 x 5/8 inch long hex head grade 5
36 987109 2 Washer 5/16 medium lock
37 5560689 1 Machine bushing 1-1/2 inch OD x 1 inch ID x 14 gauge thick
38 5065734 2 Straight thread adapter

1-4 UNO41 – 02-01 and after

 34
33

15 16
3
18
3 20
9
7 21
2
38
32 11 14
34
33 22
SECTION C-C 13
16 15
32

23 11
24
28
29
30 2 12
18 33 34 19 37
17
27 25
24
SECTION D-D 31
SECTION A-A VIEW B-B 37

CL
9
24
6 36 C 7
35 4 SECTION E-E
3 B 8

2 2 1
C
27
E
10 1
A A

31
D
E
26
29
F
30 28

5 3
D
DETAIL F
B AW0151690

Steering

Snorkel model UNO41 Page 1 - 5

 Swing drive mounting
item part no qty description
1 0151063-99 1 Swing drive - (see page 1-48 for parts breakdown)
2 6030026-99 1 Swing drive motor
8230073 1 Seal repair kit
3 5560078 2 Capscrew 1/2-13 x 1-1/2 inch long hex head grade 8
4 987139 2 Washer 1/2 medium lock
5 5560156 2 Adjustment bolt - (used on Gear Products and Perfection swing drive)
5560280 2 Adjustment bolt - (used on Tulsa Winch swing drive only)
6 5560178 1 Adjustment bolt
7 984449 4 Nut 5/8-11 hex jam
8 7110152 1 O-ring
9 5560165 4 Capscrew 1/2-13 self locking socket head
10 5560168 4 Washer 1/2 hard flat ASTM-F436
11 5560022 1 Adjustment bolt

6
5
7 1

3 2
4 9
10 7 11
AWM00310

UNO41 – 02-01 and after 1-7

 Fuel tank
item part no qty description
1 0070331 1 Fuel tank, 20 gallon capacity
9940001 1 Replacement fuel tank cap
2 0071940-99 1 Fuel tank strap
3 970029 2 Capscrew 1/4-20 x 3/4 inch long hex head grade 5
4 5560004 2 Nut 1/4-20 self locking
5 970469 1 Capscrew 3/8-16 x 1 inch long hex head grade 5
6 5560033 1 Nut 3/8-16 self locking
7 0070483 1 Fuel gauge - (includes gauge lens)
8180014 1 Replacement gauge lens
8 7714202 1 Pipe plug 1/4 NPT square head
9 0151441 1 Pickup tube - (used with diesel fuel)

6
7

2 8

4 1 AWM00301

1-8 UNO41 – 02-01 and after

 Hydraulic oil reservoir mounting
item part no qty description
1 0151789-99 1 Hydraulic oil reservoir - (see page 2-51 for parts breakdown)
2 0071940-99 1 Fuel tank strap
3 7714204 1 Pipe plug 1/2 inch NPT square head
4 970029 2 Capscrew 1/4-20 x 3/4 inch long hex head grade 5
5 5560004 2 Nut 1/4-20 self locking
6 970469 1 Capscrew 3/8-16 x 1 inch long hex head grade 5
7 5560033 1 Nut 3/8-16 self locking

3 5
4
AWM00302

UNO41 – 02-01 and after 1-9

 Booms mounting
item part no qty description
1 0153173 1 Upper boom and hose carrier - (see page 1-12 for parts breakdown)
2 0152893-99 1 Floating turret, lower
3 0152710-99 1 Floating turret, upper
4 0150822-99 1 Follower bar, lower
5 0152852-99 1 Lower boom
6 0150823-99 1 Follower bar, middle
7 0152850-99 1 Middle boom
8 0151041 1 Middle boom lift cylinder after 5-09-01 - (see page 2-28 for parts breakdown)
20150276 1 Upper boom lift cylinder before 5-09-01 - (see page 2-29 for parts breakdown)
9 0151041 1 Middle boom lift cylinder before 5-09-01 - (see page 2-27 for parts breakdown)
0151041 1 Middle boom lift cylinder after 5-09-01 - (see page 2-28 for parts breakdown)
10 0150253 1 Master level cylinder - (see page 2-36 for parts breakdown)
11 0150685 1 Pin
12 0150689 1 Pin
13 0150687 1 Pin
14 5560033 4 Nut 3/8-16 self locking
15 0150828 1 Pin
16 0150826 1 Pin
17 0150186 1 Pin
18 0150192 1 Pin
19 0150184 2 Pin
20 0150190 1 Pin
21 0150175 1 Pin
22 0150182 3 Pin
23 0151016-99 4 Washer strip
24 0070033-99 13 Pin lock
25 0150179 1 Pin lock
26 0070473 26 Capscrew 5/16-18 drilled head
27 987109 26 Washer 5/16 medium lock
28 9980012 1 .040 inch diameter stainless steel safety lockwire - (sold in one pound can)
29 970919 4 Capscrew 1/2-13 x 1-3/4 inch long hex head grade 5
30 5560039 4 Nut 1/2-13 self locking
31 5560138 1 Capscrew 1/2-13 x 1 inch long hex head self locking
32 2502032 4 Bearing
33 2500016 6 Bearing
34 2500026 1 Bearing
35 0150121 2 Slide pad
36 0151015 2 Mount, lift cylinder
37 0151020 1 Booms hydraulic equipment - (see page 2-8 for parts breakdown)
38 970909 12 Capscrew 1/2-13 x 1-1/2 inch long hex head grade 5
39 987139 12 Washer 1/2 medium lock
40 0151055 1 Lower boom lift cylinder - (see page 2-24 for parts breakdown)
41 5560644 4 Capscrew 3/8-16 x 1-1/4 inch long socket flat head

1 - 10 UNO41 – 02-01 and after

 Booms mounting

34
22 24

23
38
39 36 26
27
28
Cylinder mount detail

20 24 26 27 28
21 25 31 22 24 26 27 28
3 19 24 26 27 28
8 1
10

30
29

17 24 26 27 28 32 35
22 24 26 27 28 34
6 7

2
18 24 26 27 28 33
40 15 24 26 27 28 33
13 24 26 27 28 33 5

12 24 26 27 28 32 16 24 26 27 28 32

11 24 26 27 28 9
4
19 24 26 27 28
14 35 41

AWM00311

UNO41 – 02-01 and after 1 - 11

 Upper boom and hose carrier
item part no qty description
0153173 1 Upper boom and hose carrier
1 0151044 1 Upper boom - (see page 1-15 for parts breakdown)
2 0151202 1 Hose carrier - (see page 1-16 for parts breakdown)
3 0150224-99 2 Clamp bar
4 5093027 1 Clamp
5 5560033 6 Nut 3/8-16 self locking
6 0150586-99 4 Spacer
7 986299 12 Washer 3/8 medium flat
8 970489 4 Capscrew 3/8-16 x 1-1/2 inch long hex head grade 5
9 0150286-99 1 Tube
10 0150289-99 1 Ramp
11 970469 4 Capscrew 3/8-16 x 1 inch long hex head grade 5
12 987119 5 Washer 3/8 medium lock
13 970479 2 Capscrew 3/8-16 x 1-1/4 inch long hex head grade 5
14 0151587 1 Slide pad
15 0151520-99 1 Slide pad mounting bar
16 0151519-99 1 Slide pad track
17 5560004 2 Nut 1/4-20 self locking
18 5560031 2 Nut 5/16-18 self locking
19 970239 2 Capscrew 5/16-18 x 3/4 inch long hex head grade 5
20 986269 7 Washer 5/16 medium flat
21 987109 5 Washer 5/16 medium lock
22 970219 5 Capscrew 5/16-18 x 1/2 inch long hex head grade 5
23 970169 2 Capscrew 1/4-20 x 2 inch long hex head grade 5
24 0151876-99 1 Spacer
25 5093010 1 Clamp

1 - 12 UNO41 – 02-01 and after

 10

12 12
11 11
2 7 7

A
C

A B

B C
25 5 9 4
7
12 16 20
1
21
22

20 14
19
18

9
8
7 3 15
1
17
1 23

24
20
7 5 16 21
22
13
6 SECTION B-B SECTION C-C
5
SECTION A-A AW0150254

Upper boom and hose carrier

Snorkel model UNO41 Page 1 - 13

 32
31 1
27 2
4 A B C D E
37

33 A B C 3 D E
38 30
39

5 3
41
40
8 1 1
10
6
28

2
7 3
9
2

4 29 38
SECTION A-A SECTION C-C

SECTION E-E

17
16 26 22
25 15
24 25
18 24 36
35
21
12
11

1
14
2 13
43
42 25
35 15 23
36

20
19 2

24 SIDE VIEW OF 11 SECTION D-D 1

SECTION B-B SECTION B-B
25 AW0150249

Upper boom

Page 1 - 14 Snorkel model UNO41

 Upper boom
item part no qty description
0151044 1 Upper boom
1 0150060-99 1 Base boom
2 0150050-99 1 Tip Boom
3 0150251 1 Extend cylinder - (see page 1-19 for parts breakdown)
4 0150942 1 Slave level cylinder - (see page 2-40 section for parts breakdown)
5 0151524-99 1 Channel mount plate
6 0150085-99 1 Slave level cylinder mount
7 0150171 1 Pin
8 0150248 8 Capscrew 3/8-16 x 1 inch long drilled head
9 0150113-99 2 Backup bar
10 0150170 1 Pin
11 0150121 3 Slide pad
12 0150122 2 Slide pad
13 0150117 4 Slide pad shim, .030 inch thick
14 0150118 4 Slide pad shim, .063 inch thick
15 5560033 14 Nut 3/8-16 self locking
16 0072683 4 Slide pad spacer, 1/4 inch thick
17 0073111 4 Slide pad spacer, 1/8 inch thick
18 0150115 4 Slide pad
19 0150114-99 2 Pad stop bar
20 0150116 1 Slide pad
21 0072682 1 Slide pad
22 0072681-99 1 Slide pad mount
23 970479 10 Capscrew 3/8-16 x 1-1/4 inch long hex head grade 5
24 970469 16 Capscrew 3/8-16 x 1 inch long hex head grade 5
25 987119 17 Washer 3/8 medium lock
26 970469 4 Capscrew 3/8-16 x 1 inch long hex head grade 5
27 5063701 2 Cap
28 9980012 1 .040 inch diameter stainless steel safety lockwire - (sold in one pound can)
29 988369 2 Cotter pin 3/16 inch diameter x 1-1/2 inch long
30 0150317 2 1/4 inch hydraulic hose
31 5035003 2 Bulkhead branch tee
32 5074401 2 Bulkhead locknut
33 0070768 2 1/4 inch hydraulic hose
34 5093006 1 Clamp
35 0071272 4 Slide pad shim, .063 inch thick
36 0070838 4 Slide pad shim, .030 inch thick
37 2500016 1 Bearing
38 2500034 1 Bearing
39 2500026 1 Bearing
40 970889 4 Capscrew 1/2-13 x 1 inch long hex head grade 5
41 987139 4 Washer 1/2 medium lock
42 5560599 1 Stud 3/8-16 x 2 inch long
43 5560611 1 Nut 3/8-16 hex jam

UNO41 – 02-01 and after 1 - 15

 Hose carrier
item part no qty description
0151202 1 Hose carrier
1 0150226-99 1 Lower channel
2 0151526-99 1 Top channel
3 9920014 29 Plastic track link
4 9920015 1 Mounting bracket
5 9920016 1 Mounting bracket
6 0150224-99 1 Clamp bar
7 0150586-99 2 Spacer
8 5560033 2 Nut 3/8-16 self locking
9 972489 2 Capscrew 3/8-16 x 1-1/2 inch long hex head grade 5
10 986299 4 Washer 3/8 medium flat
11 0150256-99 2 Spacer
12 3010006 1 Power wire, 12 gauge/8 conductor x 68 feet long - (terminals not included)
3044854 Replacement terminal
13 3010009 1 Control wire #1, 18 gauge/19 conductor x 68 feet long - (terminals not included)
3046972 Replacement terminal
14 970589 2 Capscrew 3/8-16 x 4-1/2 inch long hex head grade 5
15 970009 4 Capscrew 1/4-20 x 1/2 inch long hex head grade 5
16 0150315 2 1/4 inch hydraulic hose
17 5560004 4 Nut 1/4-20 self locking
18 987119 2 Washer 3/8 medium lock
19 3010005 1 Control wire #2, 18 gauge/19 conductor x 68 feet long - (terminals not included)
3046972 Replacement terminal

1 - 16 UNO41 – 02-01 and after

 16
12
13
12/8 17

18/12
2

18/19 15

4
19
11
10 14 18
VIEW A-A

5
2
A 1 15

A 17
4
9 5 VIEW B-B
3
B
6
7

10 8 B 1

AW0151202

Hose carrier

Snorkel model UNO41 Page 1 - 17

 Extend cylinder before 7-11-01
item part no qty description
0150251 1 Extend cylinder
1 0150053-99 1 Cylinder, extension - (see page 2-34 for parts breakdown)
2 0150088-99 1 Extend cylinder mount
3 0060089 2 Slide pad
4 970009 4 Capscrew 1/4-20 x 1/2 inch long hex head grade 5
5 5560164 1 Nut 1-1/4-7 self locking
6 5560714 1 Cotter pin 3/16 inch diameter x 2-1/2 inch long
7 6010294 1 Cartridge holding valve - (factory preset, do not reset)
8 0150396 1 3/8 inch hydraulic tube
9 5065707 1 Straight thread adapter
10 5065705 2 Straight thread adapter
11 5035305 1 Straight thread 90° elbow
12 5037005 1 Swivel nut 90° elbow
13 5550050 1 Clamp

9 8
11

3
4 13 10 10

12 12
4
3 7

6
5
3 1 AW0150251
4

1 - 18 UNO41 – 02-01 and after

 Extend cylinder after 7-11-01
item part no qty description
0150251 1 Extend cylinder
1 0153277 1 Cylinder, extension - (see page 2-35 for parts breakdown)
2 5035305 2 Straight thread 90° elbow
3 0060089 2 Slide pad
4 5560329 4 Capscrew 1/4-20 x 1/2 inch long socket flat head

2
4
3
1

AW0150251-1

UNO41 – 02-01 and after 1 - 19

 Platform, gravity gate
item part no qty description
1 1 Platform - (consult factory)
2 0150264-99 1 Platform rotation gear box - (see page 1-24 for parts breakdown)
3 0151748-99 1 Pylon
4 0150393 1 Manual rotation crank
5 0150244-99 1 Lower mount
6 0150180 1 Pin
7 0070033-99 1 Pin lock
8 0150172 2 Pin
9 0150179-99 1 Pin lock
10 0150210-99 1 Pin lock
11 0070473 6 Capscrew 5/16-18 drilled head
12 5560136 1 Capscrew 1/2-13 self locking drilled head
13 0150498 1 Key 3/16 inch square x 1-1/2 inch long
14 0161182-89 1 Roller, aluminum gravity gate
15 0161177-89 1 Gravity gate
016117728 1 Gravity gate, complete - (includes items 14, 15, 16, 26 and 27)
16 0161184-89 1 Roller spacer, aluminum gravity gate
17 0150532 1 Key 3/8 inch square x 2 inch long
18 0153192 2 Rotation stop
19 0161652-99 1 Upper control box handrail
20 987109 10 Washer 5/16 medium lock
21 9980012 1 .040 inch diameter stainless steel safety lockwire - (sold in one pound can)
22 970939 6 Capscrew 1/2-13 x 2-1/4 inch long hex head grade 5
23 986359 6 Washer 1/2 medium flat
24 5560039 18 Nut 1/2-13 self locking
25 5569913 1 Set screw 3/8-16 x 3/8 inch long hex socket head
26 970529 6 Capscrew 3/8-16 x 2-1/2 inch long hex head grade 5
27 5560033 6 Nut 3/8-16 self locking
28 970269 4 Capscrew 5/16-18 x 1-1/4 inch long hex head grade 5
29 0151501-99 1 Pylon mount
30 5560154 6 Capscrew 1/2-13 x 1-3/4 inch long hex head grade 8
31 5560168 12 Washer 1/2 hard flat ASTM-F436
32 986299 8 Washer 3/8 medium flat

1 - 20 UNO41 – 02-01 and after

 19

32
1 27
26

21
20
11

24
23 10
22

17

16 27 2 2
14 25
13 4

26
A A 20
28

15

3
7
6 18

29 21
20
11
18

20
28

24
23
22

VIEW A-A

12 8
9

5 7

24
30
31
11
20
21 AWA15036C

Platform, gravity gate

Snorkel model UNO41 Page 1 - 21

 14
41 19
27
1 26
21
20
11

24 10 17
23
22
2
25
13 4
20 28
C
C 7 21
6 20
29 11

DETAIL "B"

VIEW
A-A 18

24
12 30
31
8
9
3
7
5
22 11
23 20
32 24 21

14 2

34
36

34
40
37 39
18
16 15
37
38
40

35
20
28

34 DETAIL "B" VIEW C-C

VIEW A-A
(FROM BACKSIDE) AWA15037C

Platform, swinging gate

Page 1 - 22 Snorkel model UNO41

 Platform, swinging gate
item part no qty description
1 1 Platform - (consult factory)
2 0150264-99 1 Platform rotation gear box - (see page 1-24 for parts breakdown)
3 0151748-99 1 Pylon
4 0150393 1 Manual rotation crank
5 0150244-99 1 Lower mount
6 0150180 1 Pin
7 0070033-99 2 Pin lock
8 0150172 1 Pin
9 0150179-99 1 Pin lock
10 0150210-99 1 Pin lock
11 0070473 6 Capscrew 5/16-18 drilled head
12 5560136 1 Capscrew 1/2-13 self locking drilled head
13 0150498 1 Key 3/16 inch square x 1-1/2 inch long
14 0160970-89 1 Swinging gate, aluminum platform
15 0161472-89 1 Latch stop
16 300891-89 1 Door latch
17 0150532 1 Key 3/8 inch square x 2 inch long
18 0153192 2 Rotation stop
19 0161652-99 1 Upper control box handrail
20 987109 10 Washer 5/16 medium lock
21 9980012 1 .040 inch diameter stainless steel safety lockwire - (sold in one pound can)
22 970939 6 Capscrew 1/2-13 x 2-1/4 inch long hex head grade 5
23 986359 6 Washer 1/2 medium flat
24 5560039 6 Nut 1/2-13 self locking
25 5569913 1 Set screw 3/8-16 x 3/8 inch long hex socket head
26 970529 4 Capscrew 3/8-16 x 2-1/2 inch long hex head grade 5
27 5560033 4 Nut 3/8-16 self locking
28 5560674 4 Capscrew 5/16-18 x 1-1/2 inch long hex head grade 5
29 0151501-99 1 Pylon mount
30 5560154 6 Capscrew 1/2-13 x 1-3/4 inch long hex head grade 8
31 5560168 12 Washer 1/2 hard flat ASTM-F436
32 2667500 1 Knob, gate hinge pin
33 0322724 1 Pin, gate hinge
34 2502007 4 Bearing
35 0071837 1 Spring, torsion
36 5560056 1 Roll pin 1/8 inch diameter x 1 inch long
37 970099 3 Capscrew 1/4-20 x 5/8 inch long hex head grade 5
38 987099 2 Washer 1/4 medium lock
39 986019 1 Washer 1/4 medium flat
40 984529 3 Nut sert 1/4-20
41 986299 3 Washer 3/8 medium flat

UNO41 – 02-01 and after 1 - 23

 Platform rotation gear box, Hub City
item part no qty description
0150264-99 1 Platform rotation gear box, Hub City
1 8190075 1 Spacer
2 8190031 1 Worm gear
3 8190064 2 Shim, .002 inch red
4 8190065 4 Shim, .005 inch blue
5 8190072 2 Shim, .002 inch red
6 8190073 4 Shim, .005 inch red
7 8190273 2 Cap, open
8 8190070 1 Output sheave
9 8190076 1 Output spacer
10 8190274 1 Housing
11 8190275 1 Cap, open
12 8190276 1 Cap, closed
13 8190251 1 Worm
14 8190093 2 Bearing cup
15 8190068 2 Bearing cup
16 8190094 2 Bearing cone
17 8190069 2 Bearing cone
18 970239 12 Capscrew 5/16-18 x 3/4 inch long hex head grade 5
19 970249 8 Capscrew 5/16-18 x 7/8 inch long hex head grade 5
20 8190052 1 Key 1/2 inch square
21 8190054 1 Retaining ring
22 8190279 1 Grease, rustproof LPS-2
23 7714304 3 Plug, 1/2 inch NPT hollow hex
24 8190045 1 Seal
25 8190041 2 Seal
26 8190281 2 O-ring
27 8190282 2 O-ring

1 - 24 UNO41 – 02-01 and after

 Platform rotation gear box, Hub City

23
12

26
14
16
23

10
13

23

56
11

24

9
2 21

19
17 1 20
27 8
7
43 15 25 AWV00344

UNO41 – 02-01 and after 1 - 25

 Chassis cowling
item part no qty description
1 0151837-99 1 Side cowling, rear left hand
2 0151846-99 1 Engine compartment cover
3 0151836-99 1 Side cowling, rear right hand
4 972569 30 Carriage bolt 1/4-20 x 3/4 inch long
5 0151831-99 1 Grille
6 0151679-99 1 Cover, right hand drive axle
7 970469 8 Capscrew 3/8-16 x 1 inch long hex head grade 5
8 986299 27 Washer 3/8 medium flat
9 5560033 20 Nut 3/8-16 self locking
10 5560696 12 Capscrew 3/8-16 x 1-1/8 inch long hex head grade 5
11 0151858 1 Slide pad
12 5510004 2 Rubber door latch
13 5569915 10 Machine screw #8-32 x 3/4 inch long truss head
14 987079 8 Washer #8 medium lock
15 984029 8 Nut #8-32 hex
16 0151680-99 1 Cover, left hand drive axle
17 0151882-99 4 Guide pad
18 0151881 2 Guide angle
19 970449 8 Capscrew 3/8-16 x 3/4 inch long hex head grade 5
20 970479 4 Capscrew 3/8-16 x 1-1/4 inch long hex head grade 5
21 987119 8 Washer 3/8 medium lock
22 0151859-99 1 Bottom plate
23 0151922 2 Cowling pin
24 986269 2 Washer 5/16 medium flat
25 987109 2 Washer 5/16 medium lock
26 970239 2 Capscrew 5/16-18 x 3/4 inch long hex head grade 5
27 0151850-99 1 Side cowling, front left hand
28 0151849-99 1 Side cowling, front right hand
29 0151851-99 1 Cover, front top
30 986019 30 Washer 1/4 medium flat
31 5560004 32 Nut 1/4-20 self locking

1 - 26 UNO41 – 02-01 and after

 Chassis cowling

4 29

28

19
21
8
30
31

27

8
21
19

12
22 26 4
25
5
6

19 24 23 78
8 9
18 21 13
20
17
17
10
8
11 9
12 10
16 14
8 AWM00304
15
9

UNO41 – 02-01 and after 1 - 27

 Turntable cowling
item part no qty description
1 0150719 1 Door, left hand
2 0150720 1 Door, right hand
3 0150889 1 Rear panel
4 0150776 1 Cover, left front
5 986269 3 Washer 5/16 medium flat
6 987109 3 Washer 5/16 medium lock
7 970239 3 Capscrew 5/16-18 x 3/4 inch long hex head grade 5
8 970259 6 Capscrew 5/16-18 x 1 inch long hex head grade 5
9 5560031 16 Nut 5/16-18 self locking
10 5510004 2 Rubber door latch
11 5560609 10 Machine screw #10-24 x 1/2 inch long truss head
12 987089 10 Washer #10 medium lock
13 5560034 10 Nut #10-24 self locking
14 0150121 1 Slide pad
15 970479 4 Capscrew 3/8-16 x 1-1/4 inch long hex head grade 5
16 5560033 4 Nut 3/8-16 self locking
17 970049 10 Capscrew 1/4-20 x 1 inch long hex head grade 5
18 986019 10 Washer 1/4 medium flat
19 984069 10 Nut 1/4-20 hex
20 5569012 2 Rubber bumper

1 - 28 UNO41 – 02-01 and after

 Turntable cowling

7
6
5
17
18

4 19

16
15

14

3
13
12
20 10 11

1 10 AWM00312

UNO41 – 02-01 and after 1 - 29

 Engine mounting, Ford gasoline
item part no qty description
1 0152499 1 Engine, Ford gasoline - (see page 1-33 for parts breakdown)
2 0152598-99 1 Fan shroud
3 0151841-99 1 Radiator mount
4 0101642-99 2 Radiator mounting bracket
5 0070148 8 Engine mount washer
6 7630227 1 Overflow reservoir
8060277 1 Replacement reservoir cap
7 0180832-99 1 Mount plate, overflow reservoir
8 7630299-99 1 Radiator
9 7830180 4 Radiator cushion
10 7630001 4 Engine mount
11 7630239 1 Radiator cap - 13 psi
12 7630253 1 Hose
13 7630331 1 Hose, lower radiator
14 5550020 4 Clamp
15 5560004 6 Nut 1/4-20 self locking
16 5010011 1 Fuel hose 5/16 inch diameter x 48 inch long
17 5010012 1 Radiator overflow hose 5/16 inch diameter x 42 inches long
18 5033704 1 Male 90° elbow
19 5033607 1 Male adapter
20 7714202 1 Pipe plug 1/4 NPT square head
21 5560033 8 Nut 3/8-16 self locking
22 5560039 4 Nut 1/2-13 self locking
23 5560179 4 Washer, snubbing
24 970419 4 Capscrew 3/8-16 x 1-1/4 inch long hex head grade 5
25 5560362 4 Capscrew 1/2-13 x 3-1/4 inch long hex head grade 5
26 970449 7 Capscrew 3/8-16 x 3/4 inch long hex head grade 5
27 970509 4 Capscrew 3/8-16 x 2 inch long hex head grade 5
28 986299 16 Washer 3/8 medium flat
29 970069 6 Capscrew 1/4-20 x 1-1/4 inch long hex head grade 5
30 5569850 6 Machine screw #10 x 3/4 inch long self tapping
31 0151678 1 Fuel hose x 24 inch long
32 5550028 3 Clamp
33 7630286 1 Fuel filter
34 5093027 1 Clamp
35 970029 1 Capscrew 1/4-20 x 3/4 inch long hex head grade 5
36 986019 2 Washer 1/4 medium flat
37 987099 2 Washer 1/4 medium lock
38 5093010 1 Clamp
39 5569874 1 Nut metric M5 hex
40 5093002 2 Clamp
41 5090302 2 Clamp
42 991879 2 Pop rivet #AD64-ABS

1 - 30 UNO41 – 02-01 and after

 37
36
35 22
19
19
32
32 10
5

FUEL TANK

16 31

5
25
34 33 DETAIL "A"

11
1
14 17 8 12
30 4 42
14 41
32
2
6
41
"C" 42 B
3
14

28
26
40
B
28
21 24

"A" 39 38
37
29 36
13
15 7 6 SEE DETAIL "D"
38 9
4 23
21
28
27
15 13
29

17
DETAIL "C"
AW0152500
VIEW B-B DETAIL "D"
BACK VIEW OF
ALTERNATOR

Engine mounting
Ford gasoline
Snorkel model UNO41 Page 1 - 31
 13

18
65
47 58
48
6 51
3

39
38 49
35

46
38
35

28 50
14
8 63

35
38
39
41

37

27
11
10
35 SECTION VIEW
38 OF ITEM 3
39

19 56 20 9 60
59
52 19
22 62 70
47 57
74 21 17 19 65
23 1 58
21
73 71
68
64 65
46 58

7 67
61 36 34
12 66
4

46 45
46 53
55 69
30 45
53 40 46
46 43
69 3
55 44 16
45 75 77 5
Engine 2 46 76
78 AW0152499
Ford gasoline
Page 1 - 32 Snorkel model UNO41
 Engine, Ford gasoline
item part no qty description
0152499 1 Engine, Ford gasoline complete
1 7624749 1 Engine, Ford VSG-413 gasoline
7630348 1 Replacement choke
7630700 1 Replacement carburetor
7630718 1 Carburetor rebuild kit
7630719 1 Replacement governor
7630721 1 Replacement ignition distributor
7630722 1 Replacement oil filter
7630723 1 Replacement fuel filter
7630724 4 Replacement spark plug
7630725 1 Replacement spark plug wire #1
7630726 1 Replacement spark plug wire #2
7630727 1 Replacement spark plug wire #3
7630728 1 Replacement spark plug wire #4
7630747 1 Replacement starter
8110014 1 Replacement actuator on carburetor
8260003 1 Replacement fiber float
2 0153072 1 Hydraulic pump and fittings - (see page 2-57 for parts breakdown)
3 7630300 1 Flywheel housing coupling kit
4 0152594-99 1 Mount, left hand
5 0152643-99 1 Mount, right hand
6 7630102 1 Air cleaner - (see page 1-41 for parts breakdown)
7 7630025 2 Mounting band, air cleaner
8 0152601-99 1 Mounting bracket, air cleaner
9 0153079 1 Air horn
10 0151823-99 1 Air inlet tube
11 0151872 1 Air inlet elbow
12 0151757 1 Sense line dump valve - (see page 2-58 for parts breakdown)
13 0151912 1 Tail pipe
14 0152599-99 1 Exhaust flange
15 7630229 1 Elbow
16 3020095 1 Switch, oil pressure
17 7630006 1 Air cleaner service indicator
18 5550005 1 Clamp
19 5550030 3 Clamp
20 5010007 1 Vacuum hose, 3/16 inch diameter x 18 inches long
21 5560034 4 Nut #10-24 self locking
22 5560649 2 Machine screw #10-24 x 1 inch long truss head
23 7630782 1 Ignition control module - (included with Ford engine)
24 7720201 1 Reducer bushing
25 5090031 1 Street elbow 45°, 1/8 NPT
26 7720302 1 Reducer bushing
27 5093030 1 Clamp
28 7630015 1 Elbow, 90° rubber
29 7630113 1 Elbow, 90° rubber
30 5560136 2 Capscrew 1/2-13 self locking drilled head
31 7110222 2 O-ring
32 7734510 1 Pipe 90° elbow, 1-1/4 inch NPT
33 7741096 1 Nipple 1-1/4 inch NPT
34 5560004 2 Nut 1/4-20 self locking
35 5560031 10 Nut 5/16-18 self locking
36 970029 2 Capscrew 1/4-20 x 3/4 inch long hex head grade 5
37 0073484-99 1 Brace, tail pipe
38 970259 10 Capscrew 5/16-18 x 1 inch long hex head grade 5

Parts list continued on next page

UNO41 – 02-01 and after 1 - 33

 Engine, Ford gasoline
item part no qty description
39 986269 9 Washer 5/16 medium flat
40 9980012 1 .040 inch diameter stainless steel safety lockwire - (sold in one pound can)
41 5550040 3 Clamp
42 5063703 1 Cap
43 5560168 2 Washer 1/2 hard flat ASTM-F436
44 986359 2 Washer 1/2 medium flat
45 5560626 9 Capscrew metric M10-1.5 x 30mm long hex head
46 5560356 23 Washer metric M10 lock
47 0152577-99 1 Brace, muffler
48 7630002 1 Muffler, standard
49 7734510 1 Pipe 90° elbow, 1-1/4 inch NPT
50 7741056 1 Nipple, 1-1/4 NPT x 7 inch long
51 7734710 1 Pipe elbow 1-1/4 inch NPT 90° street
52 5010020 1 Fuel hose, 5/8 inch diameter x 24 inches long
53 5560653 4 Capscrew metric M10-1.5 x 85mm long hex head
54 5569917 4 Capscrew metric M10-1.5 x 90mm long hex head
55 5560671 4 Nut metric M10 hex
56 0170587 1 Air intake hose
57 0152579-99 1 Air inlet tube
58 972029 8 Capscrew metric M8-1.25 x 20mm long hex head
59 970049 1 Capscrew 1/4-20 x 1 inch long hex head grade 5
60 5560267 1 Washer 1/4 bonded
61 986019 2 Washer 1/4 medium flat
62 7630366 1 Air intake gasket
63 0152600-99 1 Exhaust adapter
64 972049 3 Capscrew metric M10-1.5 x 40mm long hex head
65 5560355 8 Washer metric M8 lock
66 7630228 1 Alternator
67 0152641-99 1 Adjustment bar
68 5560613 1 Washer metric M8 flat
69 5560364 5 Washer metric M10 flat
70 5560222 1 Washer 3/8 hard flat ASTM-F436
71 7630697 1 V-belt
72 5035325 1 Straight thread 90° elbow
73 7630781 1 External map sensor
74 5560610 2 Machine screw #10-24 x 1-1/4 inch long truss head

1 - 34 UNO41 – 02-01 and after

 Engine mounting, Kubota diesel
item part no qty description
1 0152862 1 Engine, Kubota diesel - (see page 1-39 for parts breakdown)
2 7630152 1 Hose
3 0151841-99 1 Radiator mount
4 0101642-99 2 Radiator mounting bracket
5 7630180 4 Radiator cushion
6 7630239 1 Radiator cap - 13 psi
7 970239 1 Capscrew 5/16-18 x 3/4 inch long hex head grade 5
8 0152859-99 1 Fan shroud
9 7630257 1 Hose
10 0152037 1 Bushing, radiator hose
11 7630001 4 Engine mount
12 0070148 8 Engine mount washer
13 5560039 4 Nut 1/2-13 self locking
14 970989 4 Capscrew 1/2-13 x 3-1/2 inch long hex head grade 5
15 970449 7 Capscrew 3/8-16 x 3/4 inch long hex head grade 5
16 970479 4 Capscrew 3/8-16 x 1-1/4 inch long hex head grade 5
17 970509 4 Capscrew 3/8-16 x 2 inch long hex head grade 5
18 986299 16 Washer 3/8 medium flat
19 5560033 8 Nut 3/8-16 self locking
20 5569850 6 Machine screw #10 x 3/4 inch long self tapping
21 5560179 4 Washer, snubbing
22 5010012 1 Radiator overflow hose 5/16 inch diameter x 42 inches long
23 5033607 1 Male adapter
24 5033604 1 Male adapter
25 0151786 1 Fuel hose
26 0151787 1 5/16 inch diameter fuel supply hose
27 5550040 4 Clamp
28 5550010 4 Clamp
29 5093006 1 Clamp
30 987109 1 Washer 5/16 medium lock
31 1 Fuel filter - (included with Kubota engine)
32 7630299 1 Radiator
33 7630216 1 Fuel primer bulb
34 986269 1 Washer 5/16 medium flat
35 5093012 1 Clamp

1 - 36 UNO41 – 02-01 and after

 13

25 26
24 31
23
12

29
11 FUEL TANK

35 7
30
12 34
14

SECTIONAL DETAIL "A"

9
27 21 6
20 19 32
4
18 22
8 17

25
28 22
1
5

15 18 3

10

33
A 2
28 26
27 16
18
AW0152863
19

Engine mounting
Kubota diesel
Snorkel model UNO41 Page 1 - 37
 68
71 63 33 26
46 23
45 24
12 70
77 35 39
72 76 30
37
D 50 35
24 13
D 23
1
5136
28
52
32 42
"B"
69 31
DETAIL "C"
40
43
34
62
61
60 35 39
59 30 73
64

45
46
57 66 63
75
4
58 6
45 29 74
46 30
63

VIEW D-D
30
48 47 29
14 53
68 23 80
25 18 54 79
24 15 21 19
16 8
"C"

17 21
20 14

3 SECTION A-A
8 63
44 SAE HOUSING
9 V1305-E ENGINE
46
16 2
38
44 30 4
7
DETAIL "B"
5 AW0152862

SECTION E-E

Engine
Kubota diesel
Page 1 - 38 Snorkel model UNO41
 Engine, Kubota diesel
item part no qty description
0152862 1 Engine, Kubota diesel
1 7620048 1 Engine, Kubota V1305-E diesel
7620046 1 Engine, Kubota V1305-B1 diesel
7630730 1 Replacement alternator
7630731 1 Replacement fan/alternator belt
7630732 1 Replacement fuel shutdown solenoid
7630733 1 Replacement oil filter
7630734 1 Replacement high pressure fuel filter
7630735 1 Replacement low pressure fuel filter
7630736 4 Replacement glow plug
7630737 4 Replacement fuel injector
7630738 1 Replacement starter
2 0153072 1 Hydraulic pump and fittings - (see page 2-57 for parts breakdown)
3 970299 2 Capscrew 5/16-18 x 2 inch long hex head grade 5
4 0152887-99 1 Motor mount, right rear - Kubota V1305-B1 engine
0152857-99 1 Motor mount, right rear - Kubota V1305-E engine
5 0152888-99 1 Motor mount, left rear - Kubota V1305-B1 engine
0152858-99 1 Motor mount, left rear - Kubota V1305-E engine
6 0152856-99 1 Motor mount, right front
7 0152855-99 1 Motor mount, left front
8 0152861-99 1 Solenoid bracket
9 987109 2 Washer 5/16 medium lock
10 988029 1 Cotter pin 1/16 inch diameter x 1 inch long
11 2620001 1 Clevis pin
12 0152889-99 1 Mount bracket, air cleaner - Kubota V1305-B1 engine
0151618-99 1 Mount plate - Kubota V1305-E engine
13 0151873-99 1 Air inlet tube
14 3040174 1 Solenoid
15 3040467 1 Return spring
16 0150586-99 2 Spacer
17 2650001 1 Swivel, in-line
18 2610001-99 1 Yoke
19 0152866 1 Throttle rod
20 0072104 1 Jumper wire
21 982129 3 Nut 1/4-28 hex
22 5560054 2 Nut 1/4-28 self locking
23 5560004 10 Nut 1/4-20 self locking
24 970029 11 Capscrew 1/4-20 x 3/4 inch long hex head grade 5
25 5560094 1 Coupler nut
26 986269 7 Washer 5/16 medium flat
27 5560671 4 Nut metric M10 hex
28 0080827-99 1 Engine adapter
29 972019 12 Capscrew metric M10-1.5 x 25mm long hex head
30 5560356 22 Washer metric M10 lock
31 0151757 1 Sense line dump valve - (see page 2-58 for parts breakdown)
32 7630102 1 Air cleaner - (see page 1-41 for parts breakdown)
33 7630025 2 Mounting band, air cleaner
34 7630015 1 Elbow, 90° rubber
35 5550030 3 Clamp
36 7630006 1 Air cleaner service indicator
37 7630227 1 Overflow reservoir
8060277 1 Replacement reservoir cap
38 5560626 4 Capscrew metric M10-1.5 x 30mm long hex head
39 972049 2 Capscrew metric M10-1.5 x 40mm long hex head
40 5550028 4 Clamp

Parts list continued on next page

UNO41 – 02-01 and after 1 - 39

 Engine, Kubota diesel
item part no qty description
41 0151912 1 Tail pipe
42 5010011 1 Fuel hose 5/16 inch diameter x 54 inches long
43 0153070-99 1 Brace, muffler
44 1 Fuel filter - (included with Kubota engines)
45 970259 12 Capscrew 5/16-18 x 1 inch long hex head grade 5
46 5560031 9 Nut 5/16-18 self locking
47 7630002 1 Muffler, standard
48 0151707 1 Exhaust flange
49 970259 1 Capscrew 5/16-18 x 1 inch long hex head grade 5
50 7630077 1 Elbow, 90° rubber
51 1 Adapter - (included with 7630006 air cleaner service indicator)
52 0151872 1 Air inlet elbow
53 5550005 2 Clamp
54 0151766-99 1 Exhaust tube
55 970719 8 Capscrew 7/16-14 x 1-1/4 inch long hex head grade 5
56 987129 8 Washer 7/16 medium lock
57 5093030 1 Clamp
58 0151823-99 1 Air inlet tube
59 9980012 1 .040 inch diameter stainless steel safety lockwire - (sold in one pound can)
60 987139 2 Washer 1/2 medium lock
61 986359 2 Washer 1/2 medium flat
62 5560136 2 Capscrew 1/2-13 self locking drilled head
63 986269 14 Washer 5/16 medium flat
64 7630221 1 Coupling - Kubota V1305-B1 engine
65 987119 8 Washer 3/8 medium lock
66 0073484-99 1 Brace, tail pipe
67 970489 8 Capscrew 3/8-16 x 1-1/2 inch long hex head grade 5
68 986019 15 Washer 1/4 medium flat
69 5550040 3 Clamp
70 5560033 1 Nut 3/8-16 self locking
71 3020095 1 Switch, oil pressure
72 0152881 1 Jumper wire
73 571904 1 Straight thread adapter
74 573244 1 3/8 hydraulic hose
75 5063803 1 Hex plug
76 970479 1 Capscrew 3/8-16 x 1-1/4 inch long hex head grade 5
77 986299 1 Washer 3/8 medium flat
78 7630221 1 Coupling - Kubota V1305-E engine
79 970259 6 Capscrew 5/16-18 x 1 inch long hex head grade 5
80 986269 6 Washer 5/16 medium flat

1 - 40 UNO41 – 02-01 and after

 Air cleaner
item part no qty description
7630102 1 Air cleaner
1 1 Housing - (not sold separately)
2 8040124 1 Primary filter element
3 8040125 1 Secondary filter element
4 8040136 1 Clamp
5 8040137 1 Dust cap
6 8040118 1 Vacuator valve

1 5
2 3

6
AW7630102

UNO41 – 02-01 and after 1 - 41

 Placards and decals
item part no qty description
1 0153285 2 Decal, UNO41 logo
2 569295 2 Decal, Snorkel brand logo
3 0074908 3 Decal, Snorkel brand logo
4 0090589 1 Placard, platform capacity 500 pounds
5 0072531 1 Decal, danger electrical hazard
6 0150448 1 Decal, attach fall restraint
7 0323899 1 Decal, danger electrical hazard
8 0150452 1 Decal, directional arrows forward/reverse
9 0070420 2 Placard, emergency bleed down valve
10 0070901 1 Placard, caution serial number
11 0323897 1 Decal, danger you must not operate
12 0323896 2 Decal, danger electrical hazard
13 5560004 2 Nut 1/4-20 self locking
14 0072277 2 Placard, lug nut torque
15 0150602 3 Decal, danger descending boom
16 0071425 1 Placard, platform identification
17 0150603 1 Decal, emergency manual bleed down
18 5560655 12 Pop rivet #AD32-ABS
19 0101397 1 Document tube
20 7050003 2 Cap, document tube
21 5093013 2 Clamp
22 0153289 1 Operator’s manual UNO41
23 970009 2 Capscrew 1/4-20 x 1/2 inch long hex head grade 5
24 987099 2 Washer 1/4 medium lock
25 986019 2 Washer 1/4 medium flat
26 7030004 2 Decal, OmniQuip logo
27 0071927 1 Decal, hydraulic oil
28 7030003 1 Decal, lube recommendations
29 0151012 2 Placard, caution operating instructions
30 0150448 2 Decal, attach fall restraint
31 0074311 7 Decal, danger cylinder failure - (1 per cylinder)
32 0151410 3 Decal, danger rotating engine parts
33 0074372 1 Placard, engine rpm
34 0181562 1 Placard, ANSI standard
35 7050004 1 Record pouch
36 0073298 2 Placard, danger foam filled tires
37 5560080 4 Bumper
38 0151917 1 Decal, directional arrows
39 0074921 2 Decal, 4 inch stripe
40 0070921 1 Placard, 125 volts 15 amps
41 0150606 1 Decal, 125 volt 15 amp power to platform
42 970049 2 Capscrew 1/4-20 x 1 inch long hex head grade 5
43 0071925 1 Decal, gasoline fuel - (Ford only)
0071926 1 Decal, diesel fuel - (Kubota only)
44 0153288 2 Decal, 41 logo
45 0320241 1 Placard, choke - (Ford only)
0152864 1 Placard, preheat 10 seconds - (Kubota only)
46 0074316 1 Decal, caution governor damage
47 0151396 2 Decal, do not use ether
48 0070421 4 Placard, tire pressure - (1 per wheel)
49 0072277 4 Decal, lug nut torque
50 0074913 2 Decal, 4 x 4 logo
51 0151886 1 Decal, lift and pull

1 - 42 UNO41 – 02-01 and after

 Placards and decals

5
25
24
23
22
44 7 20
19
9
29 33 3 50
17 15 34 9
18 1 21

2 16 4 6
15 18
31

15 11 31
1810 29 46
3 50 1
37 39 36 37 26
36 51
12 39
26 14 12

49 RH VIEW OF TURNTABLE
37
37 43 3 42
47 13
48 48 27
STEER END DRIVE END 28
40
41
45
UPPER CONTROL BOX
HYDRAULIC
OIL TANK
38

8
32
TOP VIEW OF CHASSIS

47 30
32 32 35
PKG VALVE

RH VIEW OF TURNTABLE
FAN SHROUD WITH DOOR OPEN
SIDE VIEW OF
AIR CLEANER
AWA15063A

UNO41 – 02-01 and after 1 - 43

 Gear hub, drive - Auburn
item part no qty description
0151588-99 1 Gear hub, drive - Auburn
1 0074689-99 1 Spindle
2 8010026 1 Oil seal
3 8010023 1 Bearing cone
4 8010024 2 Bearing cup
5 8010022 1 Bearing cone
6 8010098 1 Retaining ring
7 5560721 9 Wheel bolt
8 8010261 1 Sealing compound
9 8010112 8 Bolt-hex head
10 8010137 1 Cover
11 8010130 1 Primary sun gear
12 8010076 1 Retaining ring
13 8010075 1 Thrust washer
14 8010149 1 O-ring
15 8010080 1 Disengage cover
16 8010143 1 Plunger
17 8010168 2 Capscrew hex head
18 8010028 1 Magnetic plug
19 8010133 1 Primary carrier
20 8010126 1 Ring gear
21 8010134 1 Secondary carrier
22 8010148 2 Retaining ring
23 8010289 1 Hub
24 8010105 12 Flat washer
25 8010070 12 Hex head bolt
26 8010014 1 Disengage spring
27 8010043 2 Thrust washer
28 8010171 1 Input shaft
29 8010013 1 Coupling

1 - 44 UNO41 – 02-01 and after

 Gear hub, drive - Auburn

7
6
2

4 8
5 9

3 10

11

1 12
13

14

30

16 15
29

17

18
28 27 U2

19
26
25
21
20
24 22

23 AW0151588

UNO41 – 02-01 and after 1 - 45

 Gear hub, steer - Auburn
item part no qty description
0151589-99 1 Gear hub, steer - Auburn
1 0074689-99 1 Spindle
2 8010026 1 Oil seal
3 8010023 1 Bearing cone
4 8010024 2 Bearing cup
5 8010022 1 Bearing cone
6 8010098 1 Retaining ring
7 8010261 2 Sealing compound
8 8010267 8 Bolt-hex head
9 8010137 1 Cover
10 8010164 1 Primary sun gear
11 8010075 1 Thrust washer
12 8010149 1 O-ring
13 8010080 1 Disengage cover
14 8010143 1 Plunger
15 8010168 2 Capscrew hex head
16 8010028 1 Magnetic plug
17 8010147 1 Retaining ring
18 8010177 1 Secondary carrier
19 8010136 1 Ring gear
20 8010148 1 Retaining ring
21 5560721 9 Wheel bolt
22 8010014 1 Disengage spring
23 8010290 1 Hub
24 8010105 6 Flat washer
25 8010070 6 Hex head bolt
26 8010043 2 Thrust washer
27 8010172 1 Input shaft
28 8010122 1 Coupling

1 - 46 UNO41 – 02-01 and after

 Gear hub, steer - Auburn

6
7

1 5
4 8

9
3
10
2

11
12
29
13

14

15

16

28

26
17

19
27 22 25
18

20
24
21
23 AW0151589

UNO41 – 02-01 and after 1 - 47

 Swing drive, Perfection
item part no qty description
0151063-99 1 Swing drive - Perfection
0153206 1 Seal repair kit - (kit includes items 10, 13 and 18 through 25)
1 0163001 1 Housing
2 0163002 1 Gear cap
3 0163003 1 Snap ring
4 0163004 1 Worn gear
5 0153204 1 Worm
6 0153205 1 Worm cap
7 0172035 2 Bearing cup
8 0172036 2 Bearing cone
9 0163007 1 Pinion
10 Kit item 1 Oil seal - (not sold separately)
11 0163009 1 Bearing cone
12 0163010 1 Bearing cup
13 Kit item 1 Oil seal - (not sold separately)
14 0163012 1 Spacer
15 0163013 6 Capscrew 7/16-14 x 1-1/4 inch long hex socket head
16 0163014 1 Bearing cup
17 0163015 1 Bearing cone
18 Kit item 2 Shim, .010 inch thick - (not sold separately)
19 Kit item 2 Shim, .0075 inch thick - (not sold separately)
20 Kit item 2 Shim, .005 inch thick - (not sold separately)
21 Kit item 2 Shim, .003 inch thick - (not sold separately)
22 Kit item 2 Shim, .0075 inch thick - (not sold separately)
23 Kit item 2 Shim, .005 inch thick - (not sold separately)
24 Kit item 2 Shim, .003 inch thick - (not sold separately)
25 Kit item 2 Oil seal - (not sold separately)
26 0172050 4 Pipe plug
27 970469 4 Capscrew 3/8-16 x 1 inch long hex head grade 5
28 5570003 1 Grease fitting 1/8 NPT 90°
29 0172054 1 Reducer bushing
30 0172053 1 Pressure vent plug

1 - 48 UNO41 – 02-01 and after

 Swing drive, Perfection

28
2
21 16 17 4 30
20 15
19 29
18

14

12 26
11

10

13

1
8

6 22
25 23
27 24
AWV00335

UNO41 – 02-01 and after 1 - 49

 Tires and wheels
item part no qty description
Standard air filled tires and wheels
1 0152647 2 Tire and wheel, left hand drive - (includes items 3, 4 and 5)
2 0152651 2 Tire and wheel, right hand drive - (includes items 3, 4 and 5)
3 7280017 4 Tire, 12-16.5 8 ply bar lug
4 0151127-99 4 Drive wheel
5 7280054 4 Rim valve
6 7280001 36 Lug nut

Optional foam filled tires and wheels

7 0151947 2 Tire and wheel, left hand drive 12-16.5 8 ply bar lug
8 0152019 2 Tire and wheel, right hand drive 12-16.5 8 ply bar lug
9 7280001 36 Lug nut

Optional air filled flotation tires and wheels

10 0152654 4 Tire and wheel, flotation - (includes items 11, 12 and 13)
11 7280059 4 Tire, 16.5L-16.1 6 ply flotation
12 0151869-99 4 Flotation drive wheel
13 7280062 4 Rim valve
14 7280001 36 Lug nut

Note: Do not mix tire sizes or brands on any one machine.

3
6

5
4 9

1 7
2 8

11
14

13
12

AWM00306

10

1 - 50 UNO41 – 02-01 and after

 Section 2. - Hydraulics

UNO41 – 02-01 and after 2-1

 Chassis hydraulic equipment
item part no qty description
1 0151730-99 1 Drive control valve - (see page 2-16 for parts breakdown)
2 0151729-99 1 Transmission valve - (see page 2-18 for parts breakdown)
3 0151735 1 High-low speed valve - (see page 2-49 for parts breakdown)
4 0151864 1 Gear flow divider - (see page 2-48 for parts breakdown)
5 0151794 1 Hydraulic oil return filter - (see page 2-56 for parts breakdown)
6 0151790 2 Accumulator, chassis - (see page 2-21 for parts breakdown)
7 0151793 1 Emergency power pump - (see page 2-46 for parts breakdown)
8 0151795 1 Check valve - (see page 2-23 for parts breakdown)
9 0151810 1 3/4 inch hydraulic tube
10 5035403 1 Bulkhead run tee
11 5036703 1 Swivel nut run tee
12 5074401 1 Bulkhead locknut
13 987109 2 Washer 5/16 medium lock
14 5093014 4 Clamp
15 5058820 2 Clamp, suction hose
16 970449 13 Capscrew 3/8-16 x 3/4 inch long hex head grade 5
17 970469 4 Capscrew 3/8-16 x 1 inch long hex head grade 5
18 970119 2 Capscrew 5/16-18 x 3 inch long hex head grade 5
19 986299 19 Washer 3/8 medium flat
20 987119 15 Washer 3/8 medium lock
21 984109 4 Nut 3/8-16 hex
22 0151918 1 Orifice .035 inch diameter
23 5093031 2 Clamp
24 5560106 2 Capscrew 3/8-16 x 2-3/4 inch long hex head grade 5
25 970029 6 Capscrew 1/4-20 x 3/4 inch long hex head grade 5
26 986019 6 Washer 1/4 medium flat
27 987099 6 Washer 1/4 medium lock
28 5093010 2 Clamp
29 5093002 2 Clamp
30 984069 4 Nut 1/4-20 hex
31 986269 2 Washer 5/16 medium flat

2-2 UNO41 – 02-01 and after

 30
27
20
26 19 13 8 20
25 28 16 31 7 19
18 3 16
27
26 9
25
29
2
5 15

21 19
17
B

A
B
6
14 23
29
4
16
19
20
16
19
25 28 20
26
27
30 19
12 24

11 8

10
22 VIEW B-B
AW0151773-1

DETAIL C
Chassis hydraulic equipment

Snorkel model UNO41 Page 2 - 3

 RH DRIVE MOTOR
FRONT

27
S
9
F

R D

24 HYDRAULIC OIL TANK

RH DRIVE MOTOR
REAR
23 12 BR
24 25
9
S F
ACCUMULATOR
13 21
R D

4 10
26 2 6
OIL
FILTER TT VALVE
FMR PKG
EM POWER
UNIT
T
3 A1 VS P S OUT
TOP
IN
C1 C2
RMR X
5 B4
4
M1 B1
V1 DUAL
CBAL
V2
TRANS
PV1
16
C FLOW B2 B5
VALVE
20 21 (A) K
DIV 3 WAY
A1 A2 PV2 B3 VALVE
TO M2
TURNTABLE C2 A2
PACKAGE FMF RMF 1 15
VALVE 27
21 (B) 7
FMR

7 21
X 5 CHECK
20 9 RMR
11
VALVE IN

TRANS 11 S
D
PUMP
VP EP OUT
VALVE
PROP B A
C GEAR OV T X
DRIVE
FLOW
CONTROL
DIV SV P
Y P T

9 19 C A SENSE 25
26 12 21 14 LINE
DUMP
22 2 21 B VALVE

ACCUMULATOR
18 26 10 D F 17
S
R

BR

8 12 LH DRIVE MOTOR
REAR

D F

R S

AW0151773-2

LH DRIVE MOTOR
FRONT

Chassis hydraulic hoses

Page 2 - 4 Snorkel model UNO41

 Chassis hydraulic hoses
item part no qty description
1 0151425 1 1-1/4 inch suction hose x 15 inch long
2 0110907 2 3/4 inch hydraulic hose
3 0080524 1 3/4 inch hydraulic hose
4 0020276 3 3/8 inch hydraulic hose
5 0070926 2 1/2 inch hydraulic hose
6 0100422 1 3/8 inch hydraulic hose
7 0040276 2 1/4 inch hydraulic hose
8 0070911 1 1/4 inch hydraulic hose
9 0322247 1 3/8 inch hydraulic hose
10 0100271 2 1/4 inch hydraulic hose
11 0110732 1 1/2 inch hydraulic hose
12 0070772 4 1/4 inch hydraulic hose
13 0151867 2 3/4 inch hydraulic hose
14 0050137 2 1/4 inch hydraulic hose
15 0151514 3 3/4 inch hydraulic hose
16 0020270 1 3/8 inch hydraulic hose
17 5090034 1 Hose guard - (specify length required)
18 0151860 1 1/2 inch hydraulic hose
19 0151861 1 1 inch hydraulic hose
20 0020283 2 1/4 inch hydraulic hose
21 0070771 6 1/4 inch hydraulic hose
22 0110171 1 3/4 inch hydraulic hose
23 0070791 1 1/2 inch hydraulic hose
24 0020266 2 3/8 inch hydraulic hose
25 0060290 2 3/8 inch hydraulic hose
26 0070768 3 1/4 inch hydraulic hose
27 0070783 2 1/4 inch hydraulic hose

UNO41 – 02-01 and after 2-5

 Turntable hydraulic equipment
item part no qty description
1 0152330 1 Package valve, Vickers - (see page 2-11 for parts breakdown)
2 0150382 1 Pressure switch - (see page 2-61 for parts breakdown)
3 0151222-99 1 Mounting bracket
4 970169 2 Capscrew 1/4-20 x 2 inch long hex head grade 5
5 987099 3 Washer 1/4 medium lock
6 986019 3 Washer 1/4 medium flat
7 984069 3 Nut 1/4-20 hex
8 970419 2 Capscrew 3/8-16 x 1-1/4 inch long hex head grade 5
9 970119 2 Capscrew 5/16-18 x 3 inch long hex head grade 5
10 987119 2 Washer 3/8 medium lock
11 986299 4 Washer 3/8 medium flat
12 984109 2 Nut 3/8-16 hex
13 987109 4 Washer 5/16 medium lock
14 986269 4 Washer 5/16 medium flat
15 5065710 2 Straight thread adapter
16 5036903 2 Swivel nut 45° elbow
17 5064002 2 Tube end reducer
18 5063906 2 Fitting nut
19 0151508 1 Accumulator, turntable - (see page 2-22 for parts breakdown)
20 5093014 1 Clamp
21 970029 1 Capscrew 1/4-20 x 3/4 inch long hex head grade 5

16
18 15
17

7
6
5
1 4

2
3
12
11
10
8
3 19
A A
1413 9
11
VIEW A-A

20
1 5
7
21 AW0151183-1

2-6 UNO41 – 02-01 and after

 Turntable hydraulic hoses
item part no qty description
1 0070910 2 1/4 inch hydraulic hose
2 0070769 2 1/4 inch hydraulic hose
3 0150604 2 Orifice .029 inch diameter
4 0020263 1 1/4 inch hydraulic hose
5 0150975 1 Orifice .052 inch diameter
6 0100271 1 1/4 inch hydraulic hose
7 0070772 1 1/4 inch hydraulic hose
8 0070911 1 1/4 inch hydraulic hose
9 0070781 1 1/4 inch hydraulic hose
10 0050137 1 1/4 inch hydraulic hose

SWING
DRIVE

LOWER
LOWER
LIFT

RAISE
CYL
1
4

ACCUM

2
6

TO "A" PORT @ CHASIS SENSE LINE DUMP VALVE

STEER CYL

BASE END
BOOM

RAISE

BOOM

BOOM

BOOM
TO CHASIS DRIVE VALVE (TEE @ "Y" PORT)

BOOM

RAISE
RAISE
HOSE

HOSE

HOSE

HOSE
HOSE

EXT

UP
R
9
T S VS

B
B

B
B

B
B

LOWER
BOOM
BOOM
BOOM

UPPER
MIDDLE

EXT/RET
SWING

LEVEL
STEER
P TO CHASIS DRIVE VALVE (TEE @ "P" PORT)
A

A
A
L
P
BOOM HOSE

BOOM HOSE
BOOM HOSE
BOOM HOSE
STEER CYL

DOWN
LOWER

LOWER
ROD END

LOWER

RET
10 7
3

2
AW0151183-2

1 5

UNO41 – 02-01 and after 2-7

 Booms hydraulic equipment
item part no qty description
1 5090034 1 Hose guard x 24 inches long
2 5093006 2 Clamp
3 0150318-99 2 Bracket
4 0150319-99 1 Bracket
5 0110581-99 14 Spacer
6 0152892 1 Cover
7 5093002 2 Clamp
8 5093010 2 Clamp
9 5093027 2 Clamp
10 0152844-99 2 Clamp strap
11 972489 6 Capscrew 3/8-16 x 1-1/2 inch long hex head grade 5
12 970069 2 Capscrew 1/4-20 x 1-1/4 inch long hex head grade 5
13 986019 11 Washer 1/4 medium flat
14 5560004 4 Nut 1/4-20 self locking
15 5560033 10 Nut 3/8-16 self locking
16 970489 3 Capscrew 3/8-16 x 1-1/2 inch long hex head grade 5
17 986299 10 Washer 3/8 medium flat
18 970259 2 Capscrew 5/16-18 x 1 inch long hex head grade 5
19 987119 5 Washer 3/8 medium lock
20 986269 2 Washer 5/16 medium flat
21 5560031 2 Nut 5/16-18 self locking
22 987119 7 Washer 3/8 medium lock
23 970449 7 Capscrew 3/8-16 x 3/4 inch long hex head grade 5
24 0152882 2 1/4 inch hydraulic hose
25 0150715 2 1/4 inch hydraulic hose
26 0150713 2 1/4 inch hydraulic hose
27 0020283 1 1/4 inch hydraulic hose
28 0070768 1 1/4 inch hydraulic hose
29 0151142-99 2 Bracket, mounting tee
30 5035403 2 Bulkhead run tee
31 5074401 2 Bulkhead locknut
32 0152403 2 Turret hose guard
33 0152404-99 1 Clamping bar
34 970509 1 Capscrew 3/8-16 x 2 inch long hex head grade 5
35 0150586-99 1 Spacer
36 987099 1 Washer 1/4 medium lock
37 970049 3 Capscrew 1/4-20 x 1 inch long hex head grade 5
38 970479 6 Capscrew 3/8-16 x 1-1/4 inch long hex head grade 5
39 970569 1 Capscrew 3/8-16 x 3-1/2 inch long hex head grade 5
40 0150604 2 Orifice .029 inch diameter
41 0152845-99 1 Clamping bracket

2-8 UNO41 – 02-01 and after

 41
22
17 5 32
16
15 23
19 38
8 17 5 22
28
28 27
10
25 25 13 14 10
39 37
22 7

14 9 17 6
13 16 17
12 15 19
23
5 8

9 2
27 15 11 16
25 5 2
17 1 13
19 36
25
33 37
34 15 VIEW C-C
35 3 18
20
21
24 15 11 26 29
30
26 31
4 2
3
5 17
15 11
16 15
VIEW A-A 41
40
26

40 22 23
17
26
B
A C

VIEW B-B
C
B

AW0151020

Booms hydraulic equipment

Snorkel model UNO41 Page 2 - 9

 11

11

11
16
3

2
4

13
12

14 1
5 15
9

9 5 5 5 5 5 5
5 5 6

9 5 10
7 5 5 5
7 8 AW0152330-1

Package valve, Vickers

Page 2 - 10 Snorkel model UNO41

 Package valve, Vickers
item part no qty description
0152330 1 Package valve, Vickers
1 6010687 1 Control valve package - (see page 2-12 for parts breakdown)
2 6010773 1 Add-on valve - (see page 2-14 for parts breakdown)
3 6010591 1 Solenoid valve and coil
0180802 1 Seal repair kit
6010392 1 Replacement cartridge
3040496 1 Replacement coil, 12 volt DC
4 7119116 2 O-ring
5 5065705 13 Straight thread adapter
6 5035318 1 Straight thread 90° elbow
7 5037003 2 Swivel nut 90° elbow
8 5036703 1 Swivel nut run tee
9 5065707 3 Straight thread adapter
10 5037005 1 Swivel nut 90° elbow
11 0082010 1 Decal set, non-proportional control valve
12 970349 2 Capscrew 5/16-18 x 2-3/4 inch long hex head grade 5
13 987109 2 Washer 5/16 medium lock
14 5065703 1 Straight thread adapter
15 5070005 1 Diagnostic nipple
16 5035303 1 Straight thread 90° elbow

UNO41 – 02-01 and after 2 - 11

 Control valve package, Vickers
item part no qty description
6010687 1 Control valve package, Vickers
1 6010711 1 Manifold, 6 station
2 6010712 1 Directional control valve section - (extend)
3040551 2 Replacement coil, 12 volt DC
3 6010713 1 Directional control valve section - (bottom boom)
8220192 1 Seal repair kit
3040551 2 Replacement coil, 12 volt DC
4 6010713 1 Directional control valve section - (top boom)
8220192 1 Seal repair kit
3040551 2 Replacement coil, 12 volt DC
5 6010713 1 Directional control valve section - (steer)
8220192 1 Seal repair kit
3040551 2 Replacement coil, 12 volt DC
6 6010713 1 Directional control valve section - (swing)
8220192 1 Seal repair kit
3040551 2 Replacement coil, 12 volt DC
7 6010714 1 Directional control valve section - (level)
3040551 2 Replacement coil, 12 volt DC
8 6010698 1 Cartridge valve, 3-way inlet
6018019 1 Seal repair kit
6010707 1 Replacement cartridge
8220094 1 Replacement solenoid, 12 volt DC
9 6010710 1 Flow regulator cartridge valve
565666 1 Seal repair kit
10 6010591 1 Solenoid valve and coil
0180802 1 Seal repair kit
6010392 1 Replacement cartridge
3040496 1 Replacement coil, 12 volt DC
11 6010704 1 Shuttle valve cartridge
6018019 1 Seal repair kit
12 6010776 1 Pressure relief valve - (factory preset, do not reset)
565666 1 Seal repair kit
13 6010776 1 Pressure relief valve - (factory preset, do not reset)
565666 1 Seal repair kit
14 6010776 2 Pressure relief valve - (factory preset, do not reset)
565666 1 Seal repair kit
15 6010777 2 Pressure relief valve - (factory preset, do not reset)
565666 1 Seal repair kit
16 6010699 2 Check valve cartridge
565666 1 Seal repair kit

2 - 12 UNO41 – 02-01 and after

 Control valve package, Vickers

9 12 13 14 14 15

16

11

BOTTOM
EXTEND

BOOM

STEER
BOOM

TOP

LEVEL
SWING
10
2 3 4 5 6 16 7
15

10
1

A5 A6
A1 A2 A3 A4

B1 B2 B3 B4 B5 B6

16 AWV00330

UNO41 – 02-01 and after 2 - 13

 Add-on valve, Vickers
item part no qty description
6010773 1 Add-on valve, Vickers
1 6010720 1 Manifold, 1 station
2 6010713 1 Directional control valve section
8220192 1 Seal repair kit
3040551 2 Replacement coil, 12 volt DC
3 6010776 1 Pressure relief valve - (factory preset, do not reset)
565666 1 Seal repair kit

A B

MIDDLE
BOOM

A B
2

A
1

3
B

VIEW A–A VIEW B–B

AW6010773-2

2 - 14 UNO41 – 02-01 and after

 Control valve, drive
item part no qty description
6010520 1 Control valve, drive
0101497 1 Seal repair kit
1 6010234 1 Valve solenoid and pilot
3040124 2 Valve solenoid
3040260 1 Solenoid coil, 12 volt DC
6010262 1 Flux tube
6010151 1 Pilot valve

AW6010520

UNO41 – 02-01 and after 2 - 15

 Drive control valve
item part no qty description
0151730-99 1 Drive control valve
1 0151727-99 1 Mount plate
2 0101223-99 1 Valve mount bracket
3 6010520 1 Control valve, drive - (see page 2-15 for parts breakdown)
4 6010522 1 Dual counterbalance valve - (see page 2-45 for parts breakdown)
5 0151723 2 3/4 inch hydraulic tube
6 5035308 4 Straight thread 90° elbow
7 5065727 3 Straight thread adapter
8 5065807 1 Long straight thread adapter
9 5037008 1 Swivel nut 90° elbow
10 5035303 1 Straight thread 90° elbow
11 5037003 3 Swivel nut 90° elbow
12 5035705 1 Straight thread 45° elbow
13 5035305 1 Straight thread 90° elbow
14 970009 2 Capscrew 1/4-20 x 1/2 inch long hex head grade 5
15 987099 2 Washer 1/4 medium lock
16 970479 2 Capscrew 3/8-16 x 1-1/4 inch long hex head grade 5
17 986299 8 Washer 3/8 medium flat
18 987119 4 Washer 3/8 medium lock
19 984109 4 Nut 3/8-16 hex
20 970549 2 Capscrew 3/8-16 x 3 inch long hex head grade 5
21 5035003 2 Bulkhead branch tee
22 5074401 2 Bulkhead locknut

2 - 16 UNO41 – 02-01 and after

 6 6
5 8
13

6 5
12
11

10 3

9
20 11
17

2
16
7
17

17 18
22 22 17
19 19
18 14
21 15 AW0151730
 Transmission valve
item part no qty description
0151729-99 1 Transmission valve
1 0151728-99 1 Mounting plate
2 6010518 2 Transmission valve package - (see page 2-60 for parts breakdown)
3 6010542 1 Flow divider - (see page 2-47 for parts breakdown)
4 0151724 2 1/2 inch hydraulic tube
5 5065807 2 Long straight thread adapter
6 5035308 1 Straight thread 90° elbow
7 5065709 6 Straight thread adapter
8 5035320 4 Straight thread 90° elbow
9 5065703 2 Straight thread adapter
10 5037003 2 Swivel nut 90° elbow
11 5037006 2 Swivel nut 90° elbow
12 5569918 4 Carriage bolt 3/8-16 x 5-1/2 inch long
13 5569919 2 Carriage bolt 3/8-16 x 3-1/2 inch long
14 986299 6 Washer 3/8 medium flat
15 987119 6 Washer 3/8 medium lock
16 984109 6 Nut 3/8-16 hex
17 5065710 2 Straight thread adapter

2 - 18 UNO41 – 02-01 and after

 Transmission valve

16 16
15 15
14 14 11 11
13 12 17 17

RMF RMF

FMF FMF

8
8

10 2
1
9

C
K
FMR
4

RMR

7
3

7
2
C
K
7
5
FMR RMR

7
6 7
4
8 AW0151729

UNO41 – 02-01 and after 2 - 19

 AC generator valve
item part no qty description
0152831 1 AC generator valve
1 6010489 1 AC generator valve - (includes items 2, 3 and 4 — valve is not preset)
2 6010508 1 Cartridge valve with coil
6010509 1 Replacement cartridge valve
3040457 1 Replacement coil, 12 volt DC
3 6018901 1 Flow control valve cartridge
4 6010510 1 Shuttle valve cartridge
5 5065803 2 Long straight thread adapter
6 5037003 2 Swivel nut 90° elbow
7 5035306 1 Straight thread 90° elbow
8 5035320 1 Straight thread 90° elbow

1
5
6

S
8

VS

M P
6
5

7
3
4

2
AW0152831

2 - 20 UNO41 – 02-01 and after

 Accumulator, chassis
item part no qty description
0151790 1 Accumulator, chassis
1 6070005 1 Accumulator - (shipped uncharged)
(charge accumulator to 300 psi with dry nitrogen before use)
2 5065711 1 Straight thread adapter
3 5064003 1 Tube end reducer
4 5063906 1 Fitting nut
5 5037005 1 Swivel nut 90° elbow

2
5

3
1

AW0151790

UNO41 – 02-01 and after 2 - 21

 Accumulator, turntable
item part no qty description
0151508 1 Accumulator, turntable
1 6070006 1 Accumulator - (shipped uncharged)
(charge accumulator to 750 psi with dry nitrogen before use)
2 5065711 1 Straight thread adapter
3 5063906 1 Fitting nut
4 5064002 1 Tube end reducer
5 5036903 1 Swivel nut 45° elbow

1
4
2 3 5

AW0151508

2 - 22 UNO41 – 02-01 and after

 Check valve
item part no qty description
0151795 1 Check valve
1 6010544 1 Check valve manifold
6010565 1 Replacement check valve, Fluid Tech
8080126 1 Seal repair kit
6010563 1 Replacement check valve, Weco
8190291 1 Seal repair kit
2 5065714 1 Straight thread adapter
3 5035305 1 Straight thread 90° elbow
4 5035318 2 Straight thread 90° elbow
5 5065703 1 Straight thread adapter
6 5070005 1 Diagnostic nipple
7 5035308 1 Straight thread 90° elbow

3
5

T EP

P 1
2

SV DV VP

4
4

7 AW0151795

UNO41 – 02-01 and after 2 - 23

 Lower boom lift cylinder
item part no qty description
0151055 1 Lower boom lift cylinder
1 6047094-99 1 Cylinder, lower boom lift - (see page 2-25 for Rosenboom cylinder)
5035305 2 Straight thread 90° elbow - (installed in Rosenboom cylinder ports)
0151414-99 1 Cylinder, lower boom lift - (see page 2-26 for Texas cylinder)

Following parts for Texas cylinder only

2 0151102 1 3/8 inch hydraulic tube
3 6010794 1 Cartridge holding valve - (factory preset, do not reset)
0150563 1 Seal repair kit
4 6010292 1 Manual bleed down cartridge valve
0150567 1 Seal repair kit
8060188 1 Replacement knob
5 5065707 2 Straight thread adapter
6 5037005 1 Swivel nut 90° elbow
7 5035318 1 Straight thread 90° elbow
8 5065705 1 Straight thread adapter
9 5037003 1 Swivel nut 90° elbow

6
5
2 5

7 8

4 9 1 AW0151055

2 - 24 UNO41 – 02-01 and after

 Cylinder, lower boom lift - Rosenboom
item part no qty description
6047094-99 1 Cylinder, lower boom lift - Rosenboom
6091367 1 Seal repair kit - (kit includes items 12 through 23)
1 1 Tube - (not sold separately)
2 6091364 1 Rod
3 6091365 1 Piston
4 6091366 1 Head gland
5 6091293 1 Locking nut 1-1/4-12
6 6091241 1 Poppet
7 6091405 1 Compression spring
8 5075306 1 Hex plug
9 6010115 1 Cartridge needle valve
0071845 1 Seal repair kit
10 6010794 1 Cartridge holding valve - (factory preset, do not reset)
0150563 1 Seal repair kit
11 2500026 2 Bearing
12 Kit item 1 Snap ring - (not sold separately)
13 Kit item 1 O-ring - (not sold separately)
14 Kit item 1 O-ring - (not sold separately)
15 Kit item 1 O-ring - (not sold separately)
16 Kit item 1 Back-up - (not sold separately)
17 Kit item 1 Deep Z-seal - (not sold separately)
18 Kit item 1 Cast iron piston ring - (not sold separately)
19 Kit item 1 Capped T-seal - (not sold separately)
20 Kit item 1 Rod wiper - (not sold separately)
21 Kit item 1 Wearband - (not sold separately)
22 Kit item 2 Wearband - (not sold separately)
23 Kit item 2 Locking insert - (not sold separately)

6 8
7

10

9 2
11 1 4 20
14 15
12 5 19 22 18 3 13 16 21 17 23 AW6047094

UNO41 – 02-01 and after 2 - 25

 Cylinder, lower boom lift - Texas
item part no qty description
0151414-99 1 Cylinder, lower boom lift - Texas
8200097 1 Seal repair kit - (kit includes items 17 through 24)
1 1 Cylinder tube - (not sold separately)
2 8200157 1 Rod
3 8200156 1 Head
4 8200155 1 Piston
5 8200154 1 Spacer
6 8200153 1 Poppet
7 8200152 1 Spring
8 8200151 1 Port plug
9 8200150 1 Port plug
10 8200131 5 Port plug
11 8200149 1 Set screw
12 8200148 2 Bushing
13 8200126 1 O-ring
14 8200147 1 Cavity plug
15 8200113 1 Cotter pin
16 8200138 1 Lock nut
17 Kit item 1 Wiper - (not sold separately)
18 Kit item 1 U-cup - (not sold separately)
19 Kit item 2 Wear ring - (not sold separately)
20 Kit item 1 Back-up - (not sold separately)
21 Kit item 1 O-ring - (not sold separately)
22 Kit item 1 Cast iron ring - (not sold separately)
23 Kit item 1 CST seal - (not sold separately)
24 Kit item 1 O-ring - (not sold separately)

21
10 20
6 7 11
9
16 23 22 4
14 3

17

5 8 24 13
12 15 1 19 18
2 AWV00327

2 - 26 UNO41 – 02-01 and after

 Middle boom lift cylinder before 5-09-2001
item part no qty description
0151041 1 Middle boom lift cylinder
1 0151413-99 1 Cylinder, boom lift
(see page 2-30 for GBI cylinder)
(see page 2-31 for Green cylinder)
(see page 2-32 for Seabee cylinder)
2 0150370 1 3/8 inch hydraulic tube
3 6010794 1 Cartridge holding valve - (factory preset, do not reset)
0150563 1 Seal repair kit
4 6010292 1 Manual bleed down cartridge valve
0150567 1 Seal repair kit
8060188 1 Replacement knob
5 5065707 2 Straight thread adapter
6 5037005 1 Swivel nut 90° elbow
7 5035318 1 Straight thread 90° elbow
8 5065705 1 Straight thread adapter
9 5037003 1 Swivel nut 90° elbow

6
5
2 5

7 8

4 9 1 AW0151041

UNO41 – 02-01 and after 2 - 27

 Middle boom lift cylinder after 5-09-2001
item part no qty description
0151041 1 Middle boom lift cylinder
1 0153232-99 1 Cylinder, boom lift
(see page 2-33 for Rosenboom cylinder)
2 5035305 2 Straight thread 90° elbow

AW0151041F

2 - 28 UNO41 – 02-01 and after

 Upper boom lift cylinder
item part no qty description
20150276 1 Upper boom lift cylinder
1 0151413-99 1 Cylinder, boom lift
(see page 2-30 for GBI cylinder)
(see page 2-31 for Green cylinder)
(see page 2-32 for Seabee cylinder)
2 0150370 1 3/8 inch hydraulic tube
3 6010794 1 Cartridge holding valve - (factory preset, do not reset)
0150563 1 Seal repair kit
4 6010292 1 Manual bleed down cartridge valve
0150567 1 Seal repair kit
8060188 1 Replacement knob
5 5065707 2 Straight thread adapter
6 5037005 1 Swivel nut 90° elbow
7 5035318 1 Straight thread 90° elbow
8 5065705 1 Straight thread adapter
9 5037005 1 Swivel nut 90° elbow

6
5
2 5

7 8

4 9 1 AW0150276

UNO41 – 02-01 and after 2 - 29

 Cylinder, boom lift - GBI
item part no qty description
0151413-99 1 Cylinder, boom lift - GBI
0150553 1 Seal repair kit - (kit includes items 15 through 24)
1 1 Tube - (not sold separately)
2 8070236 1 Rod
3 8070515 1 Retainer
4 8070514 1 Bearing
5 8070240 1 Piston
6 8070512 1 Spacer
7 8070160 1 Spacer
8 8070012 1 Poppet
9 8070033 1 Nut
10 8070017 1 Spring
11 8070300 1 Lock washer
12 8070301 1 Capscrew
13 8070015 1 Port plug
14 8070504 2 Bushing
15 Kit item 1 O-ring - (not sold separately)
16 Kit item 1 Cotter pin - (not sold separately)
17 Kit item 1 Nylon plug - (not sold separately)
18 Kit item 1 Back-up - (not sold separately)
19 Kit item 1 O-ring - (not sold separately)
20 Kit item 1 C. I. ring - (not sold separately)
21 Kit item 1 T-ring - (not sold separately)
22 Kit item 1 O-ring - (not sold separately)
23 Kit item 1 U-ring - (not sold separately)
24 Kit item 1 Wiper - (not sold separately)

19
8 15 18
13 4 17
16 9 5 10
21 20 6 3
24

7
14 22 23 11
1 2 12 AWV00294

2 - 30 UNO41 – 02-01 and after

 Cylinder, boom lift - Green
item part no qty description
0151413-99 1 Cylinder, boom lift - Green
8070489 1 Seal repair kit - (kit includes items 14 through 20)
1 1 Cylinder barrel - (not sold separately)
2 8070482 1 Rod
3 8070481 1 Gland
4 8070480 1 Piston
5 8070484 2 Set screw
6 6091066 1 Full lock nut
7 8070493 1 Stop tube
8 8070432 1 Cotter pin
9 8070487 1 Cushion poppet
10 8070488 1 Spring
11 8070486 1 Threaded spacer
12 2500026 2 Bearing
13 8070863 1 Bearing spacer
14 Kit item 1 O-ring - (not sold separately)
15 Kit item 1 O-ring - (not sold separately)
16 Kit item 1 Back-up - (not sold separately)
17 Kit item 1 Base seal - (not sold separately)
18 Kit item 1 Rod seal - (not sold separately)
19 Kit item 1 Rod wiper - (not sold separately)
20 Kit item 1 Piston ring - (not sold separately)

16
9 10 15
17 4 11
8 6 20 5
3
19

12
13 14 7 1 18 2 AWV00303

UNO41 – 02-01 and after 2 - 31

 Cylinder, boom lift - Seabee
item part no qty description
0151413-99 1 Cylinder, boom lift - Seabee
8190263 1 Seal repair kit - (kit includes items 16 through 24)
1 1 Cylinder case - (not sold separately)
2 8190261 1 Shaft
3 8190260 1 Piston
4 8190259 1 Head gland
5 8190080 1 Piston nut
6 8190258 1 Thrust plate
7 8190251 1 Set screw
8 8190222 4 Plug
9 8190249 1 Plug
10 8190248 2 Bushing
11 8190088 1 Poppet
12 8190145 1 Plug
13 8190089 1 Spring
14 8190218 1 Pin
15 8190247 1 Bushing spacer
16 Kit item 1 Wiper - (not sold separately)
17 Kit item 1 U-cup - (not sold separately)
18 Kit item 1 O-ring - (not sold separately)
19 Kit item 1 Back-up - (not sold separately)
20 Kit item 1 O-ring - (not sold separately)
21 Kit item 2 Back-up - (not sold separately)
22 Kit item 1 Piston T seal - (not sold separately)
23 Kit item 2 Piston ring - (not sold separately)
24 Kit item 1 Cotter key - (not sold separately)

14
11 13 19 4
23 22 12 18 7
8 5 3 6
16

10
15 9 24 20 1 2 17
21 AWV00296

2 - 32 UNO41 – 02-01 and after

 Cylinder, boom lift - Rosenboom
item part no qty description
0153232-99 1 Cylinder, boom lift - Rosenboom
6091367 1 Seal repair kit - (kit includes items 12 through 23)
1 1 Tube - (not sold separately)
2 6091364 1 Rod
3 6091365 1 Piston
4 6091366 1 Head gland
5 6091293 1 Locking nut 1-1/4-12
6 6091241 1 Poppet
7 6091405 1 Compression spring
8 5075306 1 Hex plug
9 6010115 1 Cartridge needle valve
0071845 1 Seal repair kit
10 6010794 1 Cartridge holding valve - (factory preset, do not reset)
0150563 1 Seal repair kit
11 2500026 2 Bearing
12 Kit item 1 Snap ring - (not sold separately)
13 Kit item 1 O-ring - (not sold separately)
14 Kit item 1 O-ring - (not sold separately)
15 Kit item 1 O-ring - (not sold separately)
16 Kit item 1 Back-up - (not sold separately)
17 Kit item 1 Deep Z-seal - (not sold separately)
18 Kit item 1 Cast iron piston ring - (not sold separately)
19 Kit item 1 Capped T-seal - (not sold separately)
20 Kit item 1 Rod wiper - (not sold separately)
21 Kit item 1 Wearband - (not sold separately)
22 Kit item 2 Wearband - (not sold separately)
23 Kit item 2 Locking insert - (not sold separately)

6 8
7

10

9 2
11 1 4 20
14 15
12 5 19 22 18 3 13 16 21 17 23 AW0153232

UNO41 – 02-01 and after 2 - 33

 Cylinder, extension - GBI
item part no qty description
0150053-99 1 Cylinder, extension - GBI
0150554 1 Seal repair kit - (kit includes items 12 through 19)
1 1 Case - (not sold separately)
2 8070550 1 Rod
3 8070549 1 Thread ring
4 8070024 1 Head gland
5 8070547 1 Spacer
6 8070546 1 Piston
7 8070362 1 Lock washer
8 8070363 1 Capscrew
9 8070543 1 Nut
10 8070542 1 Port plug
11 8070540 1 Snap ring
12 Kit item 1 O-ring - (not sold separately)
13 Kit item 1 Nylon plug - (not sold separately)
14 Kit item 1 Back-up - (not sold separately)
15 Kit item 1 O-ring - (not sold separately)
16 Kit item 1 T-ring - (not sold separately)
17 Kit item 1 O-ring - (not sold separately)
18 Kit item 1 U-cup - (not sold separately)
19 Kit item 1 Wiper - (not sold separately)

12 15
16 14
10 6 5
13
4 3
19

11 17
9 1 2 7
18 8 AWV00311

2 - 34 UNO41 – 02-01 and after

 Cylinder, extension - Rosenboom
item part no qty description
0153277 1 Cylinder, extension - Rosenboom
6091412 1 Seal repair kit - (kit includes items 10 through 19)
1 1 Tube - (not sold separately)
2 6091407 1 Rod
3 6091408 1 Head gland cap
4 6091410 1 Head gland
5 6091409 1 Piston
6 6091411 1 Rod spacer
7 6091237 1 Locking nut
8 6010294 1 Cartridge holding valve - (factory preset, do not reset)
9 5569835 1 Set screw 5/16-18 x 1/4 inch long
10 Kit item 1 Snap ring - (not sold separately)
11 Kit item 1 O-ring - (not sold separately)
12 Kit item 1 O-ring - (not sold separately)
13 Kit item 1 Back-up - (not sold separately)
14 Kit item 1 Diso-pac - (not sold separately)
15 Kit item 1 Deep Z-seal - (not sold separately)
16 Kit item 1 Rod wiper - (not sold separately)
17 Kit item 2 Wearband - (not sold separately)
18 Kit item 2 Wearband - (not sold separately)
19 Kit item 1 Locking insert - (not sold separately)

15 9
1 8 10 7 18 14 5 6 4 12 3 2
17 13 19 16
11 AW0153277

UNO41 – 02-01 and after 2 - 35

 Master level cylinder
item part no qty description
0150253 1 Master level cylinder
1 0150045-99 1 Cylinder, master level - (see page 2-37 for Green cylinder)
0150045-99 1 Cylinder, master level - (see page 2-38 for Prince cylinder)
0153278-99 1 Cylinder, master level - (see page 2-39 for Rosenboom cylinder)
2 0150110-99 1 Mount, master level cylinder
3 5560138 1 Capscrew 1/2-13 x 1 inch long hex head self locking
4 0150179-99 1 Pin lock
5 0150177 1 Pin, master level cylinder to mount plate
6 5065703 2 Straight thread adapter

5
1

4 1
2 3
2

6 6 AW0150253

2 - 36 UNO41 – 02-01 and after

 Cylinder, master level - Green
item part no qty description
0150045-99 1 Cylinder, master level - Green
0150556 1 Seal repair kit - (kit includes items 11 through 19)
1 1 Cylinder barrel - (not sold separately)
2 6091132 1 Rod
3 6091061 1 Gland
4 6091131 1 Piston
5 8070462 1 Cap
6 5560339 2 Set screw
7 6091093 1 Full lock nut
8 6091058 2 Nylon ball
9 8070832 2 Bearing
10 8070831 1 Bearing spacer
11 Kit item 1 O-ring - (not sold separately)
12 Kit item 1 Back-up - (not sold separately)
13 Kit item 1 Piston seal - (not sold separately)
14 Kit item 1 Rod seal - (not sold separately)
15 Kit item 1 Dust seal - (not sold separately)
16 Kit item 1 Oil seal - (not sold separately)
17 Kit item 1 U-cup seal - (not sold separately)
18 Kit item 1 O-ring - (not sold separately)
19 Kit item 1 Cotter pin - (not sold separately)

13 12 8
4 11 6
7 5
17
16

9
10 15
18 1 2 3
19 14 AWV00276

UNO41 – 02-01 and after 2 - 37

 Cylinder, master level - Prince
item part no qty description
0150045-99 1 Cylinder, master level - Prince
8160051 1 Seal repair kit - (kit includes items 12 through 17)
1 8160183 1 Piston rod
2 1 Butt and tube - (not sold separately)
3 8160185 1 Piston
4 8160186 1 Gland
5 6091104 1 Locknut
6 8160174 1 Cotter pin
7 8160187 1 Set screw
8 8160188 2 Bushing
9 8160189 1 Spacer
10 8160171 2 Plug, shipping
11 8160175 1 Wiper cover
12 Kit item 1 Capped T-seal - (not sold separately)
13 Kit item 1 O-ring - (not sold separately)
14 Kit item 1 O-ring - (not sold separately)
15 Kit item 1 BU-washer - (not sold separately)
16 Kit item 1 U-cup - (not sold separately)
17 Kit item 1 Wiper - (not sold separately)

12 15
6 5 2 1 14 16
3
13 7 17
8 4
11

10
9
10

AWV00249

2 - 38 UNO41 – 02-01 and after

 Cylinder, master level - Rosenboom
item part no qty description
0153278-99 1 Cylinder, master level - Rosenboom
6091333 1 Seal repair kit - (kit includes items 7 through 17)
1 1 Tube - (not sold separately)
2 6091372 1 Rod
3 6091331 1 Piston
4 6091336 1 Head gland
5 6091282 1 Locknut
6 2500034 2 Bearing
7 Kit item 1 Snap ring - (not sold separately)
8 Kit item 1 O-ring - (not sold separately)
9 Kit item 1 O-ring - (not sold separately)
10 Kit item 1 O-ring - (not sold separately)
11 Kit item 2 Backup ring - (not sold separately)
12 Kit item 1 Backup ring - (not sold separately)
13 Kit item 1 Deep Z-seal - (not sold separately)
14 Kit item 1 Capped T-seal - (not sold separately)
15 Kit item 1 Rod wiper - (not sold separately)
16 Kit item 1 Wearband - (not sold separately)
17 Kit item 1 Locking insert - (not sold separately)

6
5 14 3 8 4 9 13 10 2
7 11 1 15
16 12 17 AW0153278

UNO41 – 02-01 and after 2 - 39

 Slave level cylinder
item part no qty description
0150942 1 Slave level cylinder
1 0150939-99 1 Cylinder, slave level
(see page 2-41 for GBI cylinder)
(see page 2-42 for Prince cylinder)
(see page 2-43 for Texas cylinder)
2 0150940 1 1/4 inch hydraulic tube
3 0150941 1 1/4 inch hydraulic tube
4 6010794 2 Cartridge holding valve - (factory preset, do not reset)
0150563 1 Seal repair kit
5 5065703 4 Straight thread adapter
6 5035303 2 Straight thread 90° elbow
7 5037003 4 Swivel nut 90° elbow
8 5036903 1 Swivel nut 45° elbow

7 7
2 5
6 5

5 2 1

6 4 3

6
4 5
3
5

8
7
6

4 3

7
AW0150942
1

2 - 40 UNO41 – 02-01 and after

 Cylinder, slave level - GBI
item part no qty description
0150939-99 1 Cylinder, slave level - GBI
0150555 1 Seal repair kit - (kit includes item 14 through 22)
1 1 Tube - (not sold separately)
2 8070211 1 Rod
3 8070213 1 Retainer
4 8070587 1 Bearing
5 8070586 1 Piston
6 8070585 1 Spacer
7 8070584 1 Spacer
8 8070300 1 Lock washer
9 8070301 1 Capscrew
10 8070180 1 Bushing
11 8070581 2 Bushing
12 8070580 2 Port plug
13 8070253 1 Nut
14 Kit item 2 O-ring - (not sold separately)
15 Kit item 1 Cotter pin - (not sold separately)
16 Kit item 1 Nylon plug - (not sold separately)
17 Kit item 1 Back-up - (not sold separately)
18 Kit item 1 O-ring - (not sold separately)
19 Kit item 1 T-ring - (not sold separately)
20 Kit item 1 O-ring - (not sold separately)
21 Kit item 1 U-ring - (not sold separately)
22 Kit item 1 Wiper - (not sold separately)

14 18
12 5 17
19 7 16
2
3
22

10
6
11 13 20 1 4 8
15 21 9 AWV00275

UNO41 – 02-01 and after 2 - 41

 Cylinder, slave level - Prince
item part no qty description
0150939-99 1 Cylinder, slave level - Prince
8160053 1 Seal repair kit - (kit includes items 16 through 21)
1 8160317 1 Piston rod
2 1 Butt and tube - (not sold separately)
3 8160319 1 Piston
4 8160320 1 Gland
5 6091104 1 Locknut
6 8160174 1 Cotter pin
7 8160187 1 Set screw
8 8160321 1 Spacer
9 8160188 2 Bushing
10 8160322 1 Bushing
11 8160189 1 Spacer
12 8160173 2 Plug
13 8160171 6 Plug
14 8160172 2 Counterbalance cavity plug
15 8160175 1 Rod and wiper cover
16 Kit item 1 Capped T-seal - (not sold separately)
17 Kit item 1 O-ring - (not sold separately)
18 Kit item 1 O-ring - (not sold separately)
19 Kit item 1 BU-washer - (not sold separately)
20 Kit item 1 U-cup - (not sold separately)
21 Kit item 1 Wiper - (not sold separately)

12 8 19 4 21
13 12 6 3 17 2 18 7
20
9 5 15
16 1
10

11
14

Butt end view AWV00251

2 - 42 UNO41 – 02-01 and after

 Cylinder, slave level - Texas
item part no qty description
0150939-99 1 Cylinder, slave level - Texas
8200103 1 Seal repair kit - (kit includes items 15 through 20)
1 1 Cylinder tube - (not sold separately)
2 8200162 1 Rod
3 8200118 1 Piston
4 8200117 1 Head
5 8200116 1 Headcap
6 8200161 1 Bushing
7 8200114 2 Bushing
8 8200113 1 Cotter pin
9 8200112 8 Port plug
10 8200111 1 Nylon plug
11 8200049 1 Set screw
12 8200110 1 Lock nut
13 8200147 2 Cavity plug
14 8200160 1 Spacer
15 Kit item 1 Wiper - (not sold separately)
16 Kit item 1 U-cup - (not sold separately)
17 Kit item 1 Back-up - (not sold separately)
18 Kit item 1 O-ring - (not sold separately)
19 Kit item 1 CST seal - (not sold separately)
20 Kit item 1 O-ring - (not sold separately)

13 18
4 17
19 11
12 10
9 14 5
3

15

6
7 20
8
1 2 16
AWV00326

UNO41 – 02-01 and after 2 - 43

 Cylinder, steering - Texas
item part no qty description
0150216-99 1 Cylinder, steering - Texas
8200122 1 Seal repair kit - (kit includes items 11 through 17)
1 1 Cylinder tube - (not sold separately)
2 8200135 1 Rod
3 8200134 1 Piston
4 8200133 1 Head
5 8200115 1 O-ring
6 8200132 1 Bushing
7 8200131 2 Port plug
8 8200130 1 Cotter pin
9 8200129 1 Retaining ring
10 8200128 1 Lock nut
11 Kit item 1 Wiper - (not sold separately)
12 Kit item 1 U-cup - (not sold separately)
13 Kit item 1 Back-up - (not sold separately)
14 Kit item 1 O-ring - (not sold separately)
15 Kit item 1 Cap seal - (not sold separately)
16 Kit item 1 O-ring - (not sold separately)
17 Kit item 1 O-ring - (not sold separately)

14
7 16 13
15 9
10 4
3
11

6
17 5
8 1 2 12 AWV00325

2 - 44 UNO41 – 02-01 and after

 Dual counterbalance valve, Fluid Tech
item part no qty description
6010522 1 Dual counterbalance valve, Fluid Tech
1 6010553 1 Counterbalance valve body
2 6010554 2 Counterbalance cartridge - (factory preset, do not reset)
6010555 1 Seal repair kit

2 2

V1 V2

C1 C2
AW6010522-1

UNO41 – 02-01 and after 2 - 45

 Emergency power pump
item part no qty description
0151793 1 Emergency power pump
1 5035305 1 Straight thread 90° elbow
2 5036706 1 Swivel nut run tee
3 5037006 1 Swivel nut 90° elbow
4 5063906 1 Fitting nut
5 5064003 1 Tube end reducer
6 5065728 1 Straight thread adapter
7 6020037-99 1 Emergency power motor/pump

7 5

1
3
2

AW0151793

2 - 46 UNO41 – 02-01 and after

 Flow divider, Fluid Tech
item part no qty description
6010542 1 Flow divider, Fluid Tech
1 6010558 1 Flow divider valve body
2 6010797 1 Flow divider cartridge
6010561 1 Seal repair kit
3 6010560 2 Check valve cartridge
565666 1 Seal repair kit

2 1

PV1 PV2

3 3
AW6010542-1

UNO41 – 02-01 and after 2 - 47

 Gear flow divider
item part no qty description
0151864 1 Gear flow divider
1 6030033 1 Flow divider, gear type
2 5035319 1 Straight thread 90° elbow
3 5035322 2 Straight thread 90° elbow

2
1

3 3
AW0151864

2 - 48 UNO41 – 02-01 and after

 High-low speed valve
item part no qty description
0151735 1 High-low speed valve
1 6010519 1 Solenoid valve, high-low shift - (see page 2-59 for parts breakdown)
2 5035318 4 Straight thread 90° elbow
3 5065705 3 Straight thread adapter
4 5036105 1 Straight thread run tee
5 5075205 1 Hex head plug
6 5035305 1 Straight thread 90° elbow

4 6

A1 B7 B2 B3 A2

5 B4 B5 B6
C2 2
2 2 2
1 3 AW0151735

UNO41 – 02-01 and after 2 - 49

 Hydraulic motor and brake
item part no qty description
0151751-99 1 Hydraulic motor and brake
1 6030027-99 1 Hydraulic drive motor - (see page 2-54 for parts breakdown)
2 7200023-99 1 Hydraulic drive motor brake
0153065 1 Lining repair kit
0153066 1 O-ring repair kit
0153067 1 Bearing repair kit
3 5075203 2 Hex head plug
4 970849 2 Capscrew 1/2-13 x 1-1/4 inch long hex head grade 5
5 971009 1 Capscrew 1/2-13 x 4 inch long hex head grade 5
6 987139 3 Washer 1/2 medium lock

6 3
5
1
64

64

3 2 AW0151751

2 - 50 UNO41 – 02-01 and after

 Hydraulic oil reservoir
item part no qty description
0151789-99 1 Hydraulic oil reservoir
1 0151590-99 1 Hydraulic oil reservoir, 20 gallon capacity
2 5035308 1 Straight thread 90° elbow
3 5035305 1 Straight thread 90° elbow
4 0151788 1 Elbow, special o-ring to hose
5 5080004 1 Filter, sump strainer
6 5090007 1 Liquid level gauge with thermometer
7 5065707 2 Straight thread adapter
8 5037006 1 Swivel nut 90° elbow

1
6

2
3

8
4 5 AW0151789

UNO41 – 02-01 and after 2 - 51

 Hydraulic drive motor, steering
item part no qty description
6030031-99 1 Hydraulic drive motor, steering
1 8050058 1 Shaft and bearing, splined
2 Kit item 3 Seal - (not sold separately)
3 8050059 1 Valve plate
4 Kit item 1 Seal - (not sold separately)
5 8050060 1 Valve
6 8050061 2 Spring
7 8050062 2 Balance ring S/A with 2 pins
8 8050084 4 Bolt
9 Kit item 1 O-ring - (not sold separately)
10 Kit item 1 Back-up ring - (not sold separately)
11 Kit item 1 O-ring - (not sold separately)
12 Kit item 1 Back-up ring - (not sold separately)
13 Kit item 1 O-ring - (not sold separately)
14 Kit item 2 Back-up ring - (not sold separately)
15 Kit item 1 Dust seal - (not sold separately)
16 Kit item 1 Shaft seal - (not sold separately)
17 Kit item 1 Back-up ring - (not sold separately)
18 8050063 1 Bearing housing, SAE B 2 bolt
19 8050082 1 Drive
20 Kit item 1 Face seal - (not sold separately)
21 8050065 1 Wear plate
22 8050083 1 Geroler
23 8050067 1 Main drive
24 8050068 1 Valve housing
25 8050069 2 Steel ball
26 8050070 2 Plug with o-ring
Kit item 2 Replacement o-ring - (not sold separately)
27 8050071 2 Compression spring
28 8050072 1 Plug with o-ring
Kit item 1 Replacement o-ring - (not sold separately)
29 8050073 1 Plug with o-ring
Kit item 1 Replacement o-ring - (not sold separately)
30 8050074 1 Control spool
31 8050032 1 Compression spring
32 8050033 1 Compression spring
33 8050077 1 Plug with o-ring
Kit item 1 Replacement o-ring - (not sold separately)
34 Kit item 1 O-ring - (not sold separately)

2 - 52 UNO41 – 02-01 and after

 Hydraulic drive motor, steering

4
3
2
23
17 16 22
2 19
2
18 21
15 20 26 8
27
25
30
28
33
32
1 31
6

29
11
14 12 24
6
13
34
5 14
AWV00319

10
9

UNO41 – 02-01 and after 2 - 53

 Hydraulic drive motor, drive
item part no qty description
6030027-99 1 Hydraulic drive motor, drive
0152189 1 Seal repair kit
1 Kit item 2 Seal - (not sold separately)
2 8050059 1 Valve plate
3 Kit item 1 Seal - (not sold separately)
4 8050060 1 Valve
5 8050061 2 Spring
6 8050062 2 Balance ring S/A with 2 pins
7 8050078 4 Bolt
8 Kit item 1 O-ring - (not sold separately)
9 Kit item 1 Back-up ring - (not sold separately)
10 Kit item 1 O-ring - (not sold separately)
11 Kit item 1 Back-up ring - (not sold separately)
12 Kit item 1 O-ring - (not sold separately)
13 Kit item 2 Back-up ring - (not sold separately)
14 8050050 1 Shaft seal
15 8050051 1 Back-up ring
16 8050079 1 Mounting flange SAE B 4 bolt bearingless
17 8050064 1 Drive
18 Kit item 1 Face seal - (not sold separately)
19 8050065 1 Wear plate
20 8050066 1 Geroler
21 8050067 1 Main drive
22 8050068 1 Valve housing
23 8050069 2 Steel ball
24 8050070 2 Plug with o-ring
Kit item 2 Replacement o-ring - (not sold separately)
25 8050071 2 Compression spring
26 8050072 1 Plug with o-ring
Kit item 1 Replacement o-ring - (not sold separately)
27 8050073 1 Plug with o-ring
Kit item 1 Replacement o-ring - (not sold separately)
28 8050074 1 Control spool
29 8050032 1 Compression spring
30 8050033 1 Compression spring
31 8050077 1 Plug with o-ring
Kit item 1 Replacement o-ring - (not sold separately)
32 Kit item 1 O-ring - (not sold separately)

2 - 54 UNO41 – 02-01 and after

 Hydraulic drive motor, drive

14
15 3
1 2
16 1
21
20
17
1
19
18 7
24
25
23
28
26
31
30
29
5

27
10
11 22
13 5
12
32 AWV00331
4
13

9
8

UNO41 – 02-01 and after 2 - 55

 Hydraulic oil return filter
item part no qty description
0151794 1 Hydraulic oil return filter
1 5080039 1 Hydraulic oil filter
5080040 1 Replacement filter element
5080049 1 Replacement filter head
5080011 1 Replacement filter condition gauge
2 5035308 2 Straight thread 90° elbow
3 5036708 1 Swivel nut run tee
4 5064007 1 Tube end reducer
5 5063908 1 Fitting nut
6 7740021 1 Close nipple 1/8 NPT
7 7754001 1 Pipe coupling, 1/8 inch NPT

OUT

7
6
1

FLOW
IN

3 45

AW0151794

2 - 56 UNO41 – 02-01 and after

 Hydraulic pump and fittings
item part no qty description
0153072 1 Hydraulic pump and fittings
1 6020036-79 1 Hydraulic pump - (pump compensator is not preset)
8160071 1 Seal repair kit - Parker pump
8180031 1 Seal repair kit - Rexroth pump
8160081 1 Replacement compensator - Parker pump
8180032 1 Replacement compensator - Rexroth pump
2 5038001 1 Beaded 90° elbow
3 5037605 1 Split flange kit
4 5035320 1 Straight thread 90° elbow
5 5038902 1 Straight flange adapter
6 5070005 1 Diagnostic nipple
7 5036503 1 Straight thread branch tee
8 5021506 1 Flange o-ring adapter
9 970699 8 Capscrew 7/16-14 x 1-1/2 inch long hex head grade 5
10 987129 8 Washer 7/16 medium lock

7
6

S
4
10
9
DR 9 10

IN OUT
5

3
8

1 AW0153072

UNO41 – 02-01 and after 2 - 57

 Sense line dump valve
item part no qty description
0151757 1 Sense line dump valve
1 6010499 1 Solenoid valve
0073620 1 Seal repair kit
6010472 1 Replacement cartridge
3040473 1 Replacement solenoid, 10 volt DC
2 5065705 2 Straight thread adapter
3 5037003 1 Swivel nut 90° elbow
4 5035305 1 Straight thread 90° elbow
5 0152687-99 1 Mounting bracket
6 970169 2 Capscrew 1/4-20 x 2 inch long hex head grade 5
7 5560004 2 Nut 1/4-20 self locking
8 986019 2 Washer 1/4 medium flat

2
78
6

3 A

B
C 2

4 AW0151757

2 - 58 UNO41 – 02-01 and after

 Solenoid valve, high-low shift
item part no qty description
6010519 1 Solenoid valve, high-low shift
1 6010552 1 Valve body
2 6010500 3 Solenoid valve
0073620 1 Seal repair kit
6010472 1 Replacement cartridge valve
3040473 1 Replacement solenoid, 10 volt DC

B1 B2 B3

1 AW6010519

UNO41 – 02-01 and after 2 - 59

 Transmission valve package, Fluid Tech
item part no qty description
6010518 1 Transmission valve package, Fluid Tech
1 6010546 1 Valve body
2 6010547 1 Relief valve cartridge
565666 1 Seal repair kit
3 6010548 2 Relief valve cartridge
565666 1 Seal repair kit
4 6010549 2 Cartridge valve, 3-way
6010551 1 Seal repair kit
5 6010550 1 Flow divider/combiner cartridge
6010551 1 Seal repair kit
6 6090050 1 Passage plug with .030 inch diameter orifice

2 3

AW6010518-1

2 - 60 UNO41 – 02-01 and after

 Pressure switch
item part no qty description
0150382 1 Pressure switch
1 3020053 1 Switch, pressure
2 5033704 1 Male 90° elbow
3 3040046 2 Terminal .250 tab male slip-on fully insulated 22/18 wire
4 3040478 1 Shrink tube x 2 inch long

3 AW0150382

UNO41 – 02-01 and after 2 - 61

 Section 3. - Electrical

UNO41 – 02-01 and after 3-1

 Chassis electrical, Ford
item part no qty description
1 0152561 1 Engine gauge panel - (see page 3-27 for parts breakdown)
2 0151865-99 2 Spacer
3 5093002 3 Clamp
4 3040268 2 Insulator boot
5 3040452 1 Insulator boot
6 0072319 1 Ground wire
7 0090959 1 Jumper wire
8 0151157 1 Battery wire
9 0151176 1 Wire harness, 110 volt power
10 0151800 1 Wire harness, high-low speed
11 0151799 1 Wire harness, chassis drive
12 0151866-99 2 Mounting bar
13 0151797 1 Steer switch, left hand - (see page 3-38 for parts breakdown)
14 0151798 1 Steer switch, right hand - (see page 3-39 for parts breakdown)
15 3044704 1 Terminal strip, 4 circuit #10 stud
16 0152571-99 1 Governor control box
17 0151816 2 Jumper wire
18 5560038 4 Nut #10-32 self locking
19 5560648 2 Machine screw #10-24 x 3/4 inch long truss head
20 5560034 6 Nut #10-24 self locking
21 5560585 4 Machine screw #10-24 x 1/2 inch long pan head
22 987089 4 Washer #10 medium lock
23 970259 4 Capscrew 5/16-18 x 1 inch long hex head grade 5
24 986299 4 Washer 3/8 medium flat
25 987119 4 Washer 3/8 medium lock
26 970049 2 Capscrew 1/4-20 x 1 inch long hex head grade 5
27 986019 6 Washer 1/4 medium flat
28 0151920 1 Wire harness, alternator connector
29 970029 2 Capscrew 1/4-20 x 3/4 inch long hex head grade 5
30 5560004 4 Nut 1/4-20 self locking
31 970509 2 Capscrew 3/8-16 x 2 inch long hex head grade 5
32 5090301 2 Clamp
33 5560662 2 Drive screw #4 x 1/4 inch long PK type U
34 0152569 1 Wire harness, chassis/turntable
35 0151160 1 Jumper wire
36 0152560 1 Wire harness, Ford 7620051 engine
0153287 1 Wire harness, Ford 7624749 engine
37 0151820 1 Wire harness, shift signal
38 5560033 2 Nut 3/8-16 self locking
39 0151736 1 Decal, steer circuit
40 5560649 2 Machine screw #10-24 x 1 inch long truss head
41 0150606 1 Decal, 125 volt 15 amp power to platform
42 7630319 1 Governor control module - (included with engine)
43 7630305 1 Spark module - (included with engine)
44 5560609 2 Machine screw #10-24 x 1/2 inch long truss head

3-2 UNO41 – 02-01 and after

 22
14 21
40
20 41 3
12 30
29
37 43 27

23
24
25 EMER 4
POWER
UNIT
34A
1 5
2
17 170 32
3 AIR CLNR
MOUNT
33
4 STARTER
10 SEE
DETAIL C 30
35
11
3
TO BATTERY 27
DISCONNECT
SWITCH

18 17

3 7
9 26 27
8

37
13

13 42
64A 28
64A
34L 164B
34L 14
34A 34A
30
29 ALTERNATOR
34R
D+
15 34R STARTER
64A
B+
20 38
19 31
24
2 16 5A

39 20
44
64A
34A

34R
34L

ENGINE 56
HARNESS
TO SOLENOID #1
TO SOLENOID #2

34A 18 3
27 DETAIL C
29 AW0152542-1
30
10
DETAIL "B" Chassis electrical
Ford
Snorkel model UNO41 Page 3 - 3
 14
22
25 21
24
23
30
12 41 29
37
42

IGN
ALT

6 3 B
4 90 56

17 64A

8A 165
40
3A
34A
1 START
2 4 16 POWER START OIL
SIGNAL PRESS
170 3 SENSE LINE TEMP
10 DUMP VALVE 34 36 GLOW
BULB
3 7 114
PLUG
28A

3
140 8D 8A 3

THROTTLE
18
17 + 37
- RUN
11 8
DRIVE VALVE A
SHOWN ROTATED 90°

5 32 26
33 27
28
35

13

37
13
64A
34L
34L 14
34A 1
34A

18
34R

34R

30
64A

64A
29
15
24
31
38 3
64A
34A

34R
34L

2
TO SOLENOID #1

34A
TO SOLENOID #2

19
39 19 20
20

10 VIEW A-A

DETAIL B AW0151774

Chassis electrical
Kubota
Page 3 - 4 Snorkel model UNO41
 Chassis electrical, Kubota
item part no qty description
1 0152134 1 Engine gauge panel - (see page 3-32 for parts breakdown)
2 0151865-99 2 Spacer
3 5093002 3 Clamp
4 3040268 2 Insulator boot
5 3040270 1 Insulator boot
6 0072319 1 Ground wire
7 0090959 1 Jumper wire
8 0151157 1 Battery wire
9 0151176 1 Wire harness, 110 volt power
10 0151800 1 Wire harness, high-low speed
11 0151799 1 Wire harness, chassis drive
12 0151866-99 2 Mounting bar
13 0151797 1 Steer switch, left hand - (see page 3-38 for parts breakdown)
14 0151798 1 Steer switch, right hand - (see page 3-39 for parts breakdown)
15 3044704 1 Terminal strip, 4 circuit #10 stud
16 0151160 1 Jumper wire
17 0151816 2 Jumper wire
18 5560038 4 Nut #10-32 self locking
19 5560648 2 Machine screw #10-24 x 3/4 inch long truss head
20 5560034 2 Nut #10-24 self locking
21 5560585 4 Machine screw #10-24 x 1/2 inch long pan head
22 987089 4 Washer #10 medium lock
23 970469 4 Capscrew 3/8-16 x 1 inch long hex head grade 5
24 986299 6 Washer 3/8 medium flat
25 987119 4 Washer 3/8 medium lock
26 970259 2 Capscrew 5/16-18 x 1 inch long hex head grade 5
27 986269 4 Washer 5/16 medium flat
28 5560031 2 Nut 5/16-18 self locking
29 970029 2 Capscrew 1/4-20 x 3/4 inch long hex head grade 5
30 5560004 2 Nut 1/4-20 self locking
31 970509 2 Capscrew 3/8-16 x 2 inch long hex head grade 5
32 5090301 2 Clamp
33 5560662 2 Drive screw #4 x 1/4 inch long PK type U
34 0151819 1 Wire harness, chassis/turntable
35 3040269 1 Insulator boot
36 0152860 1 Wire harness, Kubota engine
37 0151820 1 Wire harness, shift signal
38 5560033 2 Nut 3/8-16 self locking
39 0151736 1 Decal, steer circuit
40 1 Bushing - (included with temperature gauge)
41 0150606 1 Decal, 125 volt 15 amp power to platform
42 0152715 1 Alternator connector

UNO41 – 02-01 and after 3-5

 Turntable electrical, Ford
item part no qty description
1 0152544 1 Wiring box, Ford - (see page 3-12 for parts breakdown)
2 0151223-99 1 Mounting bracket, wiring box
3 3020040 1 Tilt alarm sensor 5°
4 0152569 1 Wire harness, chassis/turntable
5 3020049 1 Switch, battery disconnect
6 0073089 1 Placard, battery disconnect switch
7 3050002 1 Battery, 12 volt DC - 550 CCA
8 3050008 1 Battery hold down
9 3050004 2 Battery hold down bolt
10 0152611 1 Boom switch, Ford - (see page 3-36 for parts breakdown)
11 0090959 2 Jumper wire
12 0151157 1 Battery wire
13 0151159 1 Wire
14 3040269 2 Insulator boot
15 0152613 1 Wire harness, turntable
16 5093013 2 Clamp
17 5093002 3 Clamp
18 970029 12 Capscrew 1/4-20 x 3/4 inch long hex head grade 5
19 986019 8 Washer 1/4 medium flat
20 987099 12 Washer 1/4 medium lock
21 984069 9 Nut 1/4-20 hex
22 970479 4 Capscrew 3/8-16 x 1-1/4 inch long hex head grade 5
23 986299 8 Washer 3/8 medium flat
24 987119 4 Washer 3/8 medium lock
25 984109 4 Nut 3/8-16 hex
26 3044162 1 Terminal 1/4 stud insulated 16/14 wire
27 3040082 2 Terminal .250 tab male slip-on fully insulated 16/14 wire
28 3046972 23 Terminal .188 tab female slip-on insulated 22/18 wire
29 3044854 14 Terminal ring tongue insulated 12/10 wire
30 3044146 2 Terminal #10 stud insulated 22/18 wire
31 5569911 2 Machine screw #10-24 x 1-1/2 inch long truss head
32 986009 2 Washer #10 medium flat
33 987089 2 Washer #10 medium lock
34 984049 2 Nut #10-24 hex
35 573114 1 Resistor

3-6 UNO41 – 02-01 and after

 7
8
9

20
19
18
17
3
34 5
33 6
32 10
31
20
19
18
17
13
12

27 11
27 26

14 20
19
18
3

20
19
18
16

13 35

Boom wires 15
13

16 18
19 20
21

22
23 2
24
25 AW0152543

Turntable electrical
Ford
Snorkel model UNO41 Page 3 - 7
 8 34
33
7 32
10 6
31

20
9 19
18

24
23
22 17
5

13
3 14

23 25 20
X axis 18 19
SECTION A-A
14
11 12

26
17
3

27

27 20
19
18
16
13

Boom wires 18 20
4 21

15
13

15 16 18
19 20
21

18
19
20
21
1

22 2
23 AW0151777
24
25
Turntable electrical
Kubota
Page 3 - 8 Snorkel model UNO41
 Turntable electrical, Kubota
item part no qty description
1 0151694 1 Wiring box, Kubota - (see page 3-15 for parts breakdown)
2 0151223-99 1 Mounting bracket, wiring box
3 3020040 1 Tilt alarm sensor 5°
4 0151819 1 Wire harness, chassis/turntable
5 3020049 1 Switch, battery disconnect
6 0073089 1 Placard, battery disconnect switch
7 3050002 1 Battery, 12 volt DC - 550 CCA
8 3050008 1 Battery hold down
9 3050004 1 Battery hold down bolt
10 0151189 1 Boom switch, Kubota - (see page 3-9 for parts breakdown)
11 0090959 1 Jumper wire
12 0151157 1 Battery wire
13 0151159 2 Wire
14 3040269 2 Insulator boot
15 0151201 1 Wire harness, turntable
16 5093014 2 Clamp
17 5093006 3 Clamp
18 970029 12 Capscrew 1/4-20 x 3/4 inch long hex head grade 5
19 986019 8 Washer 1/4 medium flat
20 987099 12 Washer 1/4 medium lock
21 984069 12 Nut 1/4-20 hex
22 970479 4 Capscrew 3/8-16 x 1-1/4 inch long hex head grade 5
23 986299 8 Washer 3/8 medium flat
24 987119 4 Washer 3/8 medium lock
25 984109 4 Nut 3/8-16 hex
26 3044162 1 Terminal 1/4 stud insulated 16/14 wire
27 3040082 2 Terminal .250 tab male slip-on fully insulated 16/14 wire
28 3046972 23 Terminal .188 tab female slip-on insulated 22/18 wire
29 3044854 14 Terminal ring tongue insulated 12/10 wire
30 3044146 2 Terminal #10 stud insulated 22/18 wire
31 5569911 2 Machine screw #10-24 x 1-1/2 inch long truss head
32 986009 2 Washer #10 medium flat
33 987089 2 Washer #10 medium lock
34 984049 2 Nut #10-24 hex

UNO41 – 02-01 and after 3-9

 Platform electrical
item part no qty description
1 0152546 1 Upper control box, Ford - (see page 3-20 for parts breakdown)
0151698 1 Upper control box, Kubota - (see page 3-24 for parts breakdown)
2 0071800 1 Platform foot switch - (see page 3-35 for parts breakdown)
3 5093008 2 Clamp
4 970049 2 Capscrew 1/4-20 x 1 inch long hex head grade 5
5 986019 2 Washer 1/4 medium flat
6 987099 2 Washer 1/4 medium lock
7 970469 4 Capscrew 3/8-16 x 1 inch long hex head grade 5
8 986299 8 Washer 3/8 medium flat
9 5560033 4 Nut 3/8-16 self locking

9
78

6
45

3 6
5
4

AWA15024A

3 - 10 UNO41 – 02-01 and after

 Wiring box, Ford
item part no qty description
0152544 1 Wiring box, Ford
1 0152610-99 1 Wiring box
2 0152602 1 Wiring box panel - (see page 3-16 for parts breakdown)
3 5560667 4 Machine screw #10-24 x 3/8 inch long pan head
4 0070967 1 Corrosion inhibitor
5 3040358 1 Connector
6 3040070 3 Connector locknut
7 3040116 2 Connector
8 3040110 6 Connector locknut
9 3040285 1 Connector
10 3040301 1 Hole plug 7/8 inch diameter
11 3040298 1 Connector
12 3040295 2 Connector
13 0152614 1 Wire harness, wiring box internal
14 3020087 1 Switch, keyed start
8030044 1 Replacement key
15 3020020 1 Switch, emergency stop push/pull
3040194 1 Replacement switch knob
16 3020055 1 Switch, toggle
17 5560654 1 Washer #10 star tooth lock
18 0150986 1 Rheostat
19 3040348 1 Switch knob
20 3020048 1 Switch, toggle
21 3020018 6 Switch, toggle
22 5093003 3 Clamp
23 5560648 4 Machine screw #10-24 x 3/4 inch long truss head
24 986009 2 Washer #10 medium flat
25 5560034 4 Nut #10-24 self locking
26 3020081 1 Switch, toggle
27 0240483 1 Jumper wire
28 986019 2 Washer 1/4 medium flat
29 3044704 1 Terminal strip, 4 circuit #10 stud
30 5560038 4 Nut #10-32 self locking
31 0152609 1 Decal, terminal strip
32 0152616 1 Placard, wiring box
33 0070742 1 Jumper wire
34 0110727 2 Jumper wire
35 0070747 16 Jumper wire
36 0060373 6 Jumper strap
37 0071564 1 Jumper wire
38 0070746 3 Jumper wire
39 3040187 1 Connector
40 3040115 1 Connector
41 0181104 1 Jumper wire
42 974219 1 Machine screw #6-32 x 3/8 inch long round head
43 0071565 1 Jumper wire
44 986159 1 Washer #6 medium flat
45 984009 1 Nut #6-32 hex

3 - 12 UNO41 – 02-01 and after

 25 33 35
31 23 38
32
36

29
30

35
28
25
42 24 35
44 43 23 38
45
WIRING BOX 35
FRONT VIEW
35

22
VIEW A-A
35
34
35
A
41
34

35

38
37
A
27
21 21 21 13 17
20 1
19 43
18
13

4 12 40
8 39 9
6 10 6 8
26
6
5
16

7 8 8 7
8 12 11 8
2
WIRING BOX
21 21 22 BOTTOM VIEW
14 15 21 23 AW0152544
24 3
25
Wiring box
Ford
Snorkel model UNO41 Page 3 - 13
 43
25
32
33
42
39

A
VIEW B-B

WIRING BOX 28
FRONT VIEW 27
49 26 26

47
27
50 41
A
33 28
25
24
40 23
22 1 29
2
20 21 21 21 13 3
53 25
23
13 19
18
31

30
4
17
B
6
16 5
35
35 35 35
36
B

35 35 25
35 39 23
42 22
24
54 43 25
57
14 21 21 21 VIEW A-A
15
38
34 8 6 7
38 12 6 10 52 8
7 51 8
8 8 8 9
12 11
48 45

AW0151694
55
38 34 56
37

Wiring box
Kubota
Page 3 - 14 Snorkel model UNO41
 Wiring box, Kubota
item part no qty description
0151694 1 Wiring box, Kubota
1 0152610-99 1 Wiring box
2 0151695 1 Wiring box panel - (see page 3-19 for parts breakdown)
3 5560667 4 Machine screw #10-24 x 3/8 inch long pan head
4 0070967 1 Corrosion inhibitor
5 3040358 1 Connector
6 3040070 3 Connector locknut
7 3040116 2 Connector
8 3040110 6 Connector locknut
9 3040285 1 Connector
10 3040301 1 Hole plug 7/8 inch diameter
11 3040298 1 Connector
12 3040295 2 Connector
13 0151703 1 Wire harness, wiring box internal
14 3026027 1 Switch, push button
15 7140092 1 Switch seal
16 3020055 1 Switch, toggle
17 3020081 1 Switch, toggle
18 0150986 1 Rheostat
19 3040348 1 Switch knob
20 3020048 1 Switch, toggle
21 3020018 6 Switch, toggle
22 5093004 2 Clamp
23 5560648 3 Machine screw #10-24 x 3/4 inch long truss head
24 986009 2 Washer #10 medium flat
25 5560034 4 Nut #10-24 self locking
26 974239 3 Machine screw #6-32 x 1/2 inch long round head
27 986159 3 Washer #6 medium flat
28 984009 3 Nut #6-32 hex
29 3044704 1 Terminal strip, 4 circuit #10 stud
30 5560038 4 Nut #10-32 self locking
31 0151454 1 Decal, terminal strip
32 0152622 1 Placard, wiring box
33 986019 2 Washer 1/4 medium flat
34 0110727 2 Jumper wire
35 0070747 16 Jumper wire
36 0060373 6 Jumper strap
37 0071564 1 Jumper wire
38 0070746 3 Jumper wire
39 987089 1 Washer #10 medium lock
40 0070713 3 Jumper wire
41 987349 2 Washer #6 medium lock
42 974709 1 Machine screw #10-24 x 1 inch long round head
43 984049 1 Nut #10-24 hex
44 3040188 1 Relay, 12 volt DC
45 0071583 1 Jumper wire
46 0150951 1 Diode jumper wire - (includes 3040293 diode)
47 3040047 1 Terminal .250 tab female slip-on fully insulated 22/18 wire
48 0070742 1 Jumper wire
49 3040082 1 Terminal .250 tab male slip-on fully insulated 16/14 wire
50 0070711 1 Jumper wire
51 3040115 1 Connector
52 3040187 1 Connector
53 3020020 1 Switch, emergency stop push/pull
3040194 1 Replacement switch knob
54 3020087 1 Switch, keyed start
8030044 1 Replacement key
55 0071565 1 Jumper wire
56 0240483 1 Jumper wire
57 0181104 1 Jumper wire

UNO41 – 02-01 and after 3 - 15

 Wiring box panel, Ford
item part no qty description
0152602 1 Wiring box panel, Ford
1 0072950 1 Panel, drilled
2 3044712 1 Terminal strip, 12 circuit #10 stud
3 3040433 1 Terminal strip, 12 circuit .188 tab slip-on
4 0152604 1 Decal, power
5 0152605 1 Decal, terminal strip
6 0150854 1 Decal, control
7 5560654 1 Washer #10 star tooth lock
8 3040469 2 Relay, 12 volt DC
9 3040057 1 Terminal strip, 18 circuit .188 tab slip-on
10 0150488 1 Diode holder
3040108 Replacement diode - (order quantity required)
11 5560038 22 Nut #10-32 self locking
12 974279 4 Machine screw #6-32 x 3/4 inch long round head
13 984049 5 Nut #10-24 hex
14 974689 1 Machine screw #10-24 x 3/4 inch long round head
15 974729 1 Machine screw #10-24 x 1-1/4 inch long round head
16 5560034 5 Nut #10-24 self locking
17 5560609 8 Machine screw #10-24 x 1/2 inch long truss head
18 987089 6 Washer #10 medium lock
19 987349 4 Washer #6 medium lock
20 0152606 1 Decal, diode
21 0073631 2 Diode stand off
22 0181030 1 Diode wire
23 0090622 1 Jumper wire
24 0081560 1 Jumper wire
25 0181113 1 Jumper wire
26 0070682 3 Diode wire - (includes 3040108 diode)
27 0071532 2 Jumper wire
28 0170335 1 Diode wire - (includes 3040108 diode)
29 0071552 1 Jumper wire
30 0181136 1 Jumper wire
31 0090975 1 Jumper wire
32 0181110 2 Diode wire - (includes 3040108 diode)
33 0110918 4 Diode wire - (includes 3040108 diode)
34 0152603 1 Jumper wire
35 986009 6 Washer #10 medium flat
36 0070724 3 Jumper wire
37 0070711 1 Jumper wire
38 0070713 1 Jumper wire
39 0140317 1 Diode wire - (includes 3040108 diode)

3 - 16 UNO41 – 02-01 and after

 AUX. TILT

22 18 18 8 6
14 4 17
39 34 26

25 30 36
9
11
38
31 33 24 35
33

26

12 19
11

10
32
36
2 20
26
18 17
37 36

7 12 1 3 5
13 19
15
27 33 16
18

21 17
27 16

10

29 23

VIEW A-A
28
AW0152602

Wiring box panel

Ford
Snorkel model UNO41 Page 3 - 17
 23
18
4
6
5 3
24
23

9
21 21
1

10
26

2 18
17
8

17
10

19
17

13 21
25

19

5
22

14 20
15
16
27

22

20
7 11 12 5
23 AW0151695

Wiring box panel

Kubota
Page 3 - 18 Snorkel model UNO41
 Wiring box panel, Kubota
item part no qty description
0151695 1 Wiring box panel, Kubota
1 0072950 1 Panel, drilled
2 3040057 1 Terminal strip, 18 circuit .188 tab slip-on
3 0150854 1 Decal, control
4 3040188 1 Relay, 12 volt DC
5 974239 6 Machine screw #6-32 x 1/2 inch long round head
6 986159 2 Washer #6 medium flat
7 0150856 1 Decal, power
8 3044710 1 Terminal strip, 10 circuit #10 stud
9 0150488 1 Diode holder
3040108 Replacement diode - (order quantity required)
10 5560038 19 Nut #10-32 self locking
11 0151697 1 Decal, terminal strip
12 3040433 1 Terminal strip, 12 circuit .188 tab slip-on
13 5560609 4 Machine screw #10-24 x 1/2 inch long truss head
14 974709 1 Machine screw #10-24 x 1 inch long round head
15 984049 1 Nut #10-24 hex
16 5560034 1 Nut #10-24 self locking
17 0070724 3 Jumper wire
18 0070713 2 Jumper wire
19 0071532 2 Jumper wire
20 0071566 2 Jumper wire
21 0110918 3 Diode wire - (includes 3040108 diode)
22 0070682 5 Diode wire - (includes 3040108 diode)
23 0071511 3 Jumper wire
24 974659 1 Machine screw #10-24 x 1/2 inch long round head
25 0071848 1 Diode wire - (includes 3040108 diode)
26 0151696 1 Diode wire
27 5560654 1 Washer #10 star tooth lock

UNO41 – 02-01 and after 3 - 19

 Upper control box, Ford
item part no qty description
0152546 1 Upper control box, Ford
1 0153076-99 1 Control box
2 3040477 1 Controller, drive - (see page 3-42 for parts breakdown)
3 0071557 1 Jumper wire
4 3020018 7 Switch, toggle
5 3020020 1 Switch, emergency stop push/pull
3040194 1 Replacement switch knob
6 3020081 1 Switch, toggle
7 3020017 1 Switch, toggle
8 0150986 1 Rheostat
9 3040348 1 Switch knob
10 3040411 1 Mini siren, engine alarm
11 3040068 1 Circuit breaker, 20 amp capacity
12 3040071 1 Fuse holder
13 3040111 1 Fuse, 3 amp capacity
14 0152617 1 Placard, control box top
15 5560655 4 Pop rivet #AD32-ABS
16 5560086 2 Capscrew 1/4-20 x 1 inch long hex plated with sems
17 5560004 3 Nut 1/4-20 self locking
18 0150914 1 Placard, control box front
19 3020090 1 Switch, anti-restart
20 3040295 3 Connector
21 970099 2 Capscrew 1/4-20 x 5/8 inch long hex head grade 5
22 3040110 5 Connector locknut
23 7190001 1 Gasket, weatherproof x 48 inches long
24 0070967 1 Corrosion inhibitor
25 5093004 2 Clamp
26 3044704 1 Terminal strip, 4 circuit #10 stud
27 0150915 1 Decal, terminal strip
28 5560038 8 Nut #10-32 self locking
29 974709 1 Machine screw #10-24 x 1 inch long round head
30 984049 2 Nut #10-24 hex
31 5560034 1 Nut #10-24 self locking
32 970049 1 Capscrew 1/4-20 x 1 inch long hex head grade 5
33 986019 4 Washer 1/4 medium flat
34 0150901 1 Wire harness, upper control box internal
35 0070747 16 Jumper wire
36 0060373 7 Jumper strap
37 3040285 1 Connector
38 5560654 2 Washer #10 star tooth lock
39 0070730 5 Jumper wire
40 0070715 1 Jumper wire
41 0091202 1 Jumper wire
42 0070732 2 Jumper wire
43 984069 1 Nut 1/4-20 hex
44 3044158 1 Terminal #6 stud insulated 16/14 wire
45 3040116 1 Connector
46 5569003 1 Grommet
47 0151556 2 Jumper wire
48 0240483 2 Jumper wire
49 974689 1 Machine screw #10-24 x 3/4 inch long round head
50 987089 1 Washer #10 medium lock
51 480652 1 Siren, tilt alarm

3 - 20 UNO41 – 02-01 and after

 13 50
6 11 12 38
7 15 31 49
30
29 30
14

4
26
27 28
4
46 33
4 32
4 17

25

16

5 43
8 24
9

23

10 18

19

20
22 20 22
20 22 37
22
22 17 21
45 33
46

3 51 AW0152546-1

Upper control box

Ford, sheet 1
Snorkel model UNO41 Page 3 - 21
 DRIVE

EMER A
SHUT DOWN

+
10 16
36 -
3
LEVEL 47 NO X
UP
NC
35 B
C
41
R
39
39 BOOM SPEED
DN CONTROL
47
48

35

RET
UP UP 36 UP 36
35 35 CW
CCW

36 DN DN DN 36 44
35 35
EXT SWING
BOTTOM
35 MIDDLE TOP
EXT/RET 36
BOOM
BOOM BOOM

35

CIRCUIT
ENGINE BREAKER
RUN
FUSE 40 HI
3 AMP
RANGE MED 39
4
LO
RIGHT LEFT 39
EMER
STEER
POWER 9

36

34

25
3 START
48 SWITCH
9
- + IGN

10
9 BAT STRT

10 ENGINE 42 ACC
ALARM
28

AW0152546-2

Upper control box

Ford, sheet 2
Page 3 - 22 Snorkel model UNO41
 Upper control box, Kubota
item part no qty description
0151698 1 Upper control box, Kubota
1 0150907-99 1 Control box
2 3040477 1 Controller, drive - (see page 3-42 for parts breakdown)
3 3026027 1 Switch, push button
4 3020018 7 Switch, toggle
5 3020020 1 Switch, emergency stop push/pull
3040194 1 Replacement switch knob
6 3020081 1 Switch, toggle
7 3020017 1 Switch, toggle
8 0150986 1 Rheostat
9 3040348 1 Switch knob
10 3040411 1 Mini siren, engine alarm
11 3040068 1 Circuit breaker, 20 amp capacity
12 3040071 2 Fuse holder
13 3040111 2 Fuse, 3 amp capacity
14 0151877 1 Placard, control box top
15 5560655 4 Pop rivet #AD32-ABS
16 5560086 1 Capscrew 1/4-20 x 1 inch long hex plated with sems
17 5560004 3 Nut 1/4-20 self locking
18 0150914 1 Placard, control box front
19 3020090 1 Switch, anti-restart
20 3040295 3 Connector
21 3040116 1 Connector
22 3040110 5 Connector locknut
23 7190001 1 Gasket, weatherproof x 48 inches long
24 0070967 1 Corrosion inhibitor
25 5093004 2 Clamp
26 3044704 1 Terminal strip, 4 circuit #10 stud
27 0150915 1 Decal, terminal strip
28 5560038 8 Nut #10-32 self locking
29 974709 1 Machine screw #10-24 x 1 inch long round head
30 984049 2 Nut #10-24 hex
31 5560034 1 Nut #10-24 self locking
32 970049 1 Capscrew 1/4-20 x 1 inch long hex head grade 5
33 986019 4 Washer 1/4 medium flat
34 0150901 1 Wire harness, upper control box internal
35 0070747 16 Jumper wire
36 0060373 8 Jumper strap
37 3040285 1 Connector
38 5560654 1 Washer #10 star tooth lock
39 0070730 5 Jumper wire
40 0070715 1 Jumper wire
41 0091202 1 Jumper wire
42 0070732 2 Jumper wire
43 0101467 1 Jumper wire
44 3044158 1 Terminal #6 stud insulated 16/14 wire
45 0153194 1 Jumper wire
46 7140092 1 Switch seal
47 0151556 2 Jumper wire
48 0240483 1 Jumper wire
49 984069 1 Nut 1/4-20 hex
50 974689 1 Machine screw #10-24 x 3/4 inch long round head
51 970099 2 Capscrew 1/4-20 x 5/8 inch long hex head grade 5
52 480652 1 Siren, tilt alarm
53 5569003 1 Grommet
54 0071557 1 Jumper wire

3 - 24 UNO41 – 02-01 and after

 13 38
12 31
6 11 7 15 30 50
29 30

14

28
26 53
27

4 4
4
4 4 33
32
17
5
25
2

49

16
8
9 24

46
3 1
23

18

10

19

22
37
20
22 20 20 21
22 22 22
53 17
33
51

54 52 AW0151698-1

Upper control box

Kubota, sheet 1
Snorkel model UNO41 Page 3 - 25
 DRIVE

EMER 45 A
SHUT DOWN
41
+
- 3
35 47
10 LEVEL NO X
UP
36
NC
B
C

39 R
DN BOOM SPEED
CONTROL
39 47

35

35
UP 36
UP 36 UP RET
CCW CW

DN DN DN EXT 36
SWING
36 TOP 35 44
BOTTOM
35 MIDDLE
35
EXT/RET 36
BOOM BOOM BOOM

35

THROTTLE
ENGINE CIRCUIT FUSE RUN
BREAKER 3 AMP FUSE
HI
3 AMP
RANGE MED 39
4 40
25
LO
RIGHT LEFT
39 EMER
STEER POWER 9

36

34

48 3 4
25
START
9 25 SWITCH
(-) (+) IGN
10
9 48 BAT STRT
45
10 42 ACC
28

AW0151698-2

Upper control box

Kubota, sheet 2
Page 3 - 26 Snorkel model UNO41
 Engine gauge panel, Ford
item part no qty description
0152561 1 Engine gauge panel, Ford
1 0152562-99 1 Panel, engine gauge
2 0151812-99 1 Solenoid mounting angle
3 3044712 1 Terminal strip, 12 circuit #10 stud
4 0152608 1 Decal, gauge panel
5 3070003 1 Ammeter
6 3070001 1 Hour meter
7 3070020 1 Temperature gauge
8 3020093 1 Switch, magnetic
9 3040069 1 Circuit breaker, 25 amp capacity
10 3040252 2 Circuit breaker, 15 amp capacity
11 970049 2 Capscrew 1/4-20 x 1 inch long hex head grade 5
12 0152560 1 Wire harness, Ford engine
13 3040502 1 Relay, 12 volt DC
14 3040506 2 Solenoid, 12 volt DC
15 3040469 4 Relay, 12 volt DC
16 3040503 1 Connector
17 0152569 1 Wire harness, chassis/turntable
18 984049 1 Nut #10-24 hex
19 3040270 1 Insulator boot
20 5560609 6 Machine screw #10-24 x 1/2 inch long truss head
21 5560034 8 Nut #10-24 self locking
22 5560648 4 Machine screw #10-24 x 3/4 inch long truss head
23 5560038 14 Nut #10-32 self locking
24 987109 2 Washer 5/16 medium lock
25 970029 4 Capscrew 1/4-20 x 3/4 inch long hex head grade 5
26 5560004 4 Nut 1/4-20 self locking
27 986019 10 Washer 1/4 medium flat
28 984089 2 Nut 5/16-18 hex
29 5560610 1 Machine screw #10-24 x 1-1/4 inch long truss head
30 5560654 1 Washer #10 star tooth lock
31 0071555 1 Jumper wire
32 0151813 1 Diode wire
33 0071566 1 Jumper wire
34 0073642 1 Jumper wire
35 0111623 1 Placard, engine protection system
36 0070735 1 Jumper wire
37 0071541 1 Jumper wire
38 0081559 1 Jumper wire
39 0151816 2 Jumper wire
40 0152123 1 Jumper wire
41 0072112 2 Jumper wire
42 0110596 1 Jumper wire
43 0111512 1 Jumper bar
44 0151370 1 Jumper wire
45 0152677 1 Jumper wire
46 0152124 1 Jumper wire
47 0152127 1 Jumper wire
48 0152586 1 Jumper wire
49 0152587 1 Jumper wire
50 0152566 1 Diode/resister wire

Parts list continued on next page

UNO41 – 02-01 and after 3 - 27

 Engine gauge panel, Ford
item part no qty description
51 0152585 1 Dual diode jumper wire
52 0152121 1 Jumper wire
53 3044146 1 Terminal #10 stud insulated 22/18 wire
54 3044145 2 Terminal #8 stud insulated 22/18 wire
55 0181104 2 Jumper wire
56 0181113 1 Jumper wire
57 0130115 2 Jumper wire
58 0070732 1 Jumper wire
59 0152564 2 Jumper wire
60 0073253 2 Jumper wire
61 0073753 1 Jumper wire
62 0071556 1 Jumper wire
63 3040269 2 Insulator boot
64 0151371 1 Jumper wire
65 0090317 1 Jumper wire
66 0151820 1 Wire harness, shift signal
67 0111735 1 Placard, circuit breaker
68 987089 1 Washer #10 medium lock

3 - 28 UNO41 – 02-01 and after

 22 3 21
23 21 21 7 5 6 20
20 A A

9 15

15 1

8 35 67
10
16 13

29
30
21
18
68
22
21

28
14 27 24 14
25 26 3

23
26

27
24
28
15
27

11

VIEW A-A

2
AW0152561-1

Engine gauge panel

Ford, Sheet 1
Snorkel model UNO41 Page 3 - 29
 MID
TEMP THROTTLE
GAUGE
87

86 85
HOURMETER AMMETER 57 30
59 56
37
RED

WHT

BLK
HIGH
BLK 57 THROTTLE
36 87

59
86 85
30 31
1A
34
25 AMP
4A

87 85 55 40 RUN
49 41 5C 85
55 60
86

30
6
87
30
61
15 AMP 126
51
86

15 AMP 53 63
25A

87 85 CIRCUIT 125 62
BREAKER

86

START
164B
30
60
63
80 46
47 39
41
G 3C

167
NO NC S B
48 33 64
164
EMER
POWER
38 3

44
65

19
50
58 52 45
54 42
39
43 AW0152561-2

32
Engine gauge panel
Ford, sheet 2
Page 3 - 30 Snorkel model UNO41
 Engine gauge panel, Kubota
item part no qty description
0152134 1 Engine gauge panel, Kubota
1 0152910 1 Panel, engine gauge
2 0151812-99 1 Solenoid mounting angle
3 3044710 1 Terminal strip, 10 circuit #10 stud
4 0151403 1 Decal, terminal strip
5 3070003 1 Ammeter
6 3070001 1 Hour meter
7 3070021 1 Temperature gauge
8 3020076 1 Switch, magnetic
9 3040069 1 Circuit breaker, 25 amp capacity
10 3040071 2 Fuse holder
11 3040039 2 Fuse, 10 amp capacity
12 0111735 1 Placard, circuit breaker
13 3040506 1 Solenoid, 12 volt DC
14 3040469 1 Relay, 12 volt DC
15 0070732 1 Jumper wire
16 3040503 4 Connector
17 3040502 4 Relay, 12 volt DC
18 0151817 1 Jumper wire
19 0152124 2 Jumper wire
20 0152123 6 Jumper wire
21 0152125 1 Jumper wire
22 0152127 1 Jumper wire
23 0071566 1 Jumper wire
24 0152131 1 Jumper wire
25 0152121 1 Jumper wire
26 0152122 2 Jumper wire
27 0152133 1 Jumper wire
28 0071541 1 Jumper wire
29 0070735 1 Jumper wire
30 0151818 1 Jumper wire
31 0071550 1 Jumper wire
32 0081560 2 Jumper wire
33 0151813 1 Diode wire
34 0071812 1 Jumper wire
35 0152860 1 Wire harness, Kubota engine
36 0151819 1 Wire harness, chassis/turntable
37 0151820 1 Wire harness, shift signal
38 5560038 12 Nut #10-32 self locking
39 3044160 2 Terminal #10 stud insulated 16/14 wire
40 3040082 1 Terminal .250 tab male slip-on fully insulated 16/14 wire
41 5560648 2 Machine screw #10-24 x 3/4 inch long truss head
42 5560034 6 Nut #10-24 self locking
43 5560609 4 Machine screw #10-24 x 1/2 inch long truss head
44 970259 2 Capscrew 5/16-18 x 1 inch long hex head grade 5
45 5560031 2 Nut 5/16-18 self locking
46 970029 2 Capscrew 1/4-20 x 3/4 inch long hex head grade 5
47 5560004 2 Nut 1/4-20 self locking
48 0151370 1 Jumper wire
49 986269 4 Washer 5/16 medium flat
50 986019 4 Washer 1/4 medium flat
51 987109 2 Washer 5/16 medium lock
52 984089 2 Nut 5/16-18 hex

3 - 32 UNO41 – 02-01 and after

 49
45
3 44
42
41 7 5
6
A A

43
42
1A
4
9
THROT
17

10 11

16
MAIN SYSTEM

RUN

THROTTLE RUN

164

8
12 1
START
START 42 43
BY-PASS
42
41
14
50
47
46 4
16
GLOW
PLUG
52 3
51

2
13

EMER
POWER
38

17

51
52
VIEW A-A AW0152134-1

Engine gauge panel

Kubota, sheet 1
Snorkel model UNO41 Page 3 - 33
 3A
57
57 26
HOURMETER TEMP 25
GAUGE 32
21 3A 85
AMMATER THROTTLE
+ 13D
- 87 30 14D
RED
40 25A 86
BL
K
56 29 WHT
3A 85
64
4A RUN
56
1A 3A
1A 3A 87 30
CIRCUIT
33 20
32 BREAKERS 56 3A 3A
MAG 3A 86 164
B 4A
SWITCH
S 4A 4A
22 4A 5A
C 85 26
5A 5A
1A 5A 57 START
6A 6A
6A 87 30 165
7D
31 39
28 7D
7D 5A 86
9D
20
8D 25A
85
15 25A GLOW
25A
164 THROTLE 87 PLUG
FUSE 28A 28A
64 28D 164 20 30 114

RUN 164 86
18 38 7D
FUSE 24
13D
57
34 19 EMER
30 POWER

SHIFT 36
WIRE
ASSY 3A 48
5A
TURNTABLE/ 27 6A
CHASSIS WIRE 86
37 ASSY 87
30
85 23

START BY-PASS
RELAY
8D

35

ENGINE WIRE ASSY

AW0152134-2

Engine gauge panel

Kubota, sheet 2
Page 3 - 34 Snorkel model UNO41
 Platform foot switch
item part no qty description
0071800 1 Platform foot switch
1 3020021 1 Foot switch
3020037 Replacement switch, Square D switch
3020038 Replacement switch, Linemaster switch
2 0070596 1 Wire harness, platform foot switch
3 3040116 1 Connector
4 3040110 1 Connector locknut
5 0070967 1 Corrosion inhibitor
6 0060373 1 Jumper strap - (used on Square D switch only)

C NO NC

C NO NC

10

8
2
3
4

1
Foot switch wiring shown for
Linemaster switch

6
10

1B 1A 2A 2B
9

Foot switch wiring shown for

Square D switch
AW0071800

UNO41 – 02-01 and after 3 - 35

 Boom switch, Ford
item part no qty description
0152611 1 Boom switch, Ford
1 3020059 1 Switch
2 0152612 1 Wire harness, boom switch
3 3040115 1 Connector
4 3040070 1 Connector locknut
5 0151684 1 Limit switch lever
6 3011601 1 Wire, 16 gauge single conductor x 2 inches long

5 6

11A

34

4
24 23 21 22
NO NC

NO NC
14 13 11 12

1D
70
2
3
1 4 AW0152611

3 - 36 UNO41 – 02-01 and after

 Boom switch, Kubota
item part no qty description
0151189 1 Boom switch, Kubota
1 3020059 1 Switch
2 0151188 1 Wire harness, boom switch
3 3040115 1 Connector
4 3040070 1 Connector locknut
5 0151684 1 Limit switch lever
6 3011601 1 Wire, 16 gauge single conductor x 2 inches long

11A

34

74

72
24 23 21 22
NO NC

NO NC
14 13 11 12

70
6
3
4
1 AW0151189

UNO41 – 02-01 and after 3 - 37

 Steer switch, left hand
item part no qty description
0151797 1 Steer switch, left hand
1 3020079 1 Switch
2 0151802 1 Wire harness, steer switch - left hand
3 3040187 1 Connector
4 3040070 1 Connector locknut

34L
2
34L

64A
34A

4 AW0151797

3 - 38 UNO41 – 02-01 and after

 Steer switch, right hand
item part no qty description
0151798 1 Steer switch, right hand
1 3020079 1 Switch
2 0151803 1 Wire harness, steer switch - right hand
3 3040187 1 Connector
4 3040070 1 Connector locknut

34R
2
34R

64A
34A

4 AW0151798

UNO41 – 02-01 and after 3 - 39

 Power to Platform, 125 volt
item part no qty description
1 0074379 1 Electrical outlet box
2 3040625 1 Cover, electrical outlet
3 0074368 1 Cable, 110 volt power to platform - (aluminum platforms only)
4 3040624 1 Electrical outlet, GFCI - 20 amp capacity
5 5560258 2 Machine screw #8 x 3/4 inch long self tapping
6 3040472 4 Plug
7 3040691 1 Connector
8 0151176 1 Wire harness, 110 volt power
9 5093002 1 Clamp
10 0070921 1 Placard, 125 volts 15 amps
11 0150606 1 Decal, 125 volt 15 amp power to platform
12 3040252 1 Circuit breaker, 15 amp capacity
13 0071582 1 Jumper wire

3 - 40 UNO41 – 02-01 and after

 Power to Platform, 125 volt

WIRING BOX

BLUE

BRN

4 3
2 6
5
12 10

12 13

BRS
4
8 SILV GRN

to upper BLK
WHT
GRN

control box
11 Outlet wiring detail
9

AWA15060B

UNO41 – 02-01 and after 3 - 41

 Controller, drive
item part no qty description
3040477 1 Controller, drive
1 8150087 1 Knob
2 8150008 1 Tension clip
3 8150205 1 Washer
4 8150220 1 Gasket
5 8150215 1 Sleeve
6 8150216 1 Spring, heavy duty
7 8150217 1 Detent
8 8150080 1 Boot clamp
9 8150102 1 Slave gear
10 8150211 2 Standoff
11 8150200 1 Coupling
12 8150218 1 Tinnerman nut
13 8150212 2 Mounting screw
14 8150213 2 Nylon washer
15 8150201 1 Boot
16 8150202 2 Microswitch
17 8150139 2 Insulator
18 8150129 1 Insulator
19 8150206 4 Mounting screw metric M3.5 x 12mm long
20 1 Cam assembly - (not sold separately)
21 8150219 1 Cam nut
22 1 Circuit board assembly - (not sold separately)
8150001 1 Replacement potentiometer

3 - 42 UNO41 – 02-01 and after

 Controller, drive

2
3

7 56
8 A
4

11
9

12

A + – X B R A
10
22

14 15
13

8
19

19
Cam assembly
16
16

20

AW3040477

17
17 21 18
View A - A

UNO41 – 02-01 and after 3 - 43

 Section 4. - Factory installed options

UNO41 – 02-01 and after 4-1

 Hydraulic AC generator
item part no qty description
1 0151471 1 AC generator - (see page 4-7 for parts breakdown)
2 0151513-99 1 Bar
3 0151474 1 Wire harness, AC generator
4 0151472 1 Cable, 110 volt power
5 5036705 1 Swivel nut run tee
6 5063905 1 Fitting nut
7 5064001 1 Tube end reducer
8 5037003 3 Swivel nut 90° elbow
9 5065729 1 Straight thread adapter
10 5036707 1 Swivel nut run tee
11 5063907 1 Fitting nut
12 5064004 1 Tube end reducer
13 5037005 1 Swivel nut 90° elbow
14 5035305 1 Straight thread 90° elbow
15 5064011 1 Tube end reducer
16 0070772 1 1/4 inch hydraulic hose
17 0070764 1 3/8 inch hydraulic hose
18 0070793 1 1/2 inch hydraulic hose
19 0070781 1 1/4 inch hydraulic hose
20 0070911 1 1/4 inch hydraulic hose
21 5093002 4 Clamp
22 3040472 1 Plug
23 5093010 2 Clamp
24 3040252 1 Circuit breaker, 15 amp capacity
25 0150606 1 Decal, 125 volt 15 amp power to platform
26 3020048 1 Switch, toggle
27 0070742 1 Jumper wire
28 0070747 3 Jumper wire
29 0073295 1 Jumper wire
30 0070730 1 Jumper wire
31 3044142 2 Terminal #6 stud insulated 22/18 wire
32 3044852 4 Terminal ring tongue insulated 12/10 wire
33 3040046 1 Terminal .250 tab male slip-on fully insulated 22/18 wire
34 0151459 1 Placard, AC generator
35 970889 1 Capscrew 1/2-13 x 1 inch long hex head grade 5
36 987139 1 Washer 1/2 medium lock
37 986359 1 Washer 1/2 medium flat
38 970029 2 Capscrew 1/4-20 x 3/4 inch long hex head grade 5
39 987099 2 Washer 1/4 medium lock
40 986019 2 Washer 1/4 medium flat

4-2 UNO41 – 02-01 and after

 1
21

22

34

4
MACH

3
GEN
26

35
36
21 37

21
38
39
40

23

24

25

UPPER CONTROL BOX

AW0152089-1

Hydraulic AC generator
sheet 1
Snorkel model UNO41 Page 4 - 3
 28 26
28
31 31 31 AC GENERATOR
HYDRAULIC OIL MOTOR
RETURN FILTER 12
11
GEN 8
28

13
25
30 27
9
MACH

169
ENG THROTTLE RANGE
FUSE

15 10 7
EMER 4
POWER 6
29
9
25
28
169
18
AC GENERATOR
VALVE
12/8 POWER
WIRE
8 5
8 CONT
WIRE
NO 2 SENSE LINE
25 DUMP VALVE
110 VOLT 3
9 RECEPTACLE ON CHASSIS
28

10

CHECK VALVE
MANIFOLD ON
CHASSIS
T EP 16

P
24 SV 17
DV VP

32

14
33
LOWER CONTROL BOX

20
110 110
19
110 110
169 169 S

T P
TO GRD

TO AC GENERATOR
4 VALVE COIL
TURNTABLE VALVE PKG
TO AC GENERATOR

3 AW0152089-2

Hydraulic AC generator
sheet 2
Page 4 - 4 Snorkel model UNO41
 31
31 26
28 28 28
26 28

25 25
GEN GEN
28 28
31 27 31 27

30 30
MACH MACH

169 169 RANGE

ENG RANGE ENG

4 4

28 EMER 28 EMER
POWER 9 POWER 9

12/8 POWER 12/8 POWER

WIRE WIRE

CONT
WIRE
NO 2 CONT
8 8 WIRE
NO 2
110 VOLT
25 25 RECEPTACLE
25 110 VOLT 25
RECEPTACLE
9 9
28 28

10 10

32 32

LIGHT
24 SWITCH
24

FORD 4X4 PLATFORM BOX CONNECTIONS FORD 4X4 UPPER CONTROL BOX CONNECTIONS
GENERATOR ONLY GENERATOR WITH DRIVING LIGHTS AW0152089-3

Hydraulic AC generator
sheet 3
Snorkel model UNO41 Page 4 - 5
 11 19 15
11 14 19

Generator shaft and motor 3 6

must line-up for proper
coupling installation. 18 13
1
11 19 16 8 7

12

5
4

10
18 2
17 18 13 AW0151471

AC generator

Page 4 - 6 Snorkel model TB 60 DWG. 0151471

 AC generator
item part no qty description
0151471 1 AC generator
1 3080001 1 Generator, AC hydraulic powered
2 0151457 1 Mount plate
3 7240012 1 Coupling
4 0151458-99 1 Motor mounting angle
5 6030029 1 Hydraulic motor, AC generator
8020018 1 Seal repair kit
6 0151469-99 1 Bracket, valve mounting
7 0152831 1 AC generator valve - (see page 2-20 for parts breakdown)
8 0151484-99 1 Coupling cover
9 0151470 1 1/2 inch hydraulic tube
10 5035306 1 Straight thread 90° elbow
11 5560031 18 Nut 5/16-18 self locking
12 5035320 1 Straight thread 90° elbow
13 5560033 8 Nut 3/8-16 self locking
14 970299 2 Capscrew 5/16-18 x 2 inch long hex head grade 5
15 970269 8 Capscrew 5/16-18 x 1-1/4 inch long hex head grade 5
16 970369 8 Capscrew 5/16-18 x 1 inch long hex head grade 5
17 970499 4 Capscrew 3/8-16 x 1-3/4 inch long hex head grade 5
18 986299 12 Washer 3/8 medium flat
19 986269 30 Washer 5/16 medium flat

UNO41 – 02-01 and after 4-7

 Airline to platform
item part no qty description
1 5240004 1 Hose reel
2 0151663-99 1 Mounting plate
3 0151672 2 Guide mounting bar
4 5550021 2 Cable guide, 4 roller
5 5093014 3 Clamp
6 5260012 2 Pipe fitting, 1/2 inch diameter x 3/8 inch NPT
7 5031003 1 Street elbow 90° 3/8 NPT
8 0151740 1 Air hose, 1/2 inch diameter
9 0151741 1 Air hose, 3/16 inch diameter
10 0151664 1 Support angle
11 0151743-99 2 Angle, air hose
12 0150759 2 Gusset
13 25560083 1 Trim lock x 5 inches long
14 970426 4 Capscrew 3/8-16 x 7/8 inch long hex head grade 5
15 987119 4 Washer 3/8 medium lock
16 5093002 3 Clamp
17 5093006 6 Clamp
18 970029 10 Capscrew 1/4-20 x 3/4 inch long hex head grade 5
19 5560004 4 Nut 1/4-20 self locking
20 986019 7 Washer 1/4 medium flat
21 5550010 4 Clamp
22 5260010 2 Pipe fitting, 3/8 inch diameter x 3/8 inch NPT
23 987139 1 Washer 1/2 medium lock
24 987099 6 Washer 1/4 medium lock
25 7714203 2 Hex head plug
26 970469 4 Capscrew 3/8-16 x 1 inch long hex head grade 5
27 986299 4 Washer 3/8 medium flat
28 5560033 4 Nut 3/8-16 self locking
29 970849 1 Capscrew 1/2-13 x 1-1/4 inch long hex head grade 5
30 986359 1 Washer 1/2 medium flat

4-8 UNO41 – 02-01 and after

 17 7 22 21
8 6

11
18
18 19
24 24 View C - C
21
6
18
19
20
19
18
25 16
13
11 15
17 14 16 9
4 16
Detail –D–
28 View B - B C C
5
27 15
26 12 14
4

21 A
6
2 18
10 19
23 20
29
30

1 5
3

20
17 8 18
17 8
1
5
B B

17
See detail –D–

AW0151073

View A - A

Air line to platform

Snorkel model UNO41 Page 4 - 9

 15 13

85
87A
19 30

87
86

20
21 15 6

8 25
3
22 9

IGN
27
STRT
14
18
BAT ACC 10
16

25
MASTER
4 SWITCH

WIRING BOX 3
17
4
13

8
1

11
9
3
10 5 6

2
12 5
RIGHT HAND SIDE
OF LOWER WIRING BOX

6
23 FRONT VIEW OF
UPPER CONTROL BOX

4 AW0152424

Driving lights and taillights

Page 4 - 10 Snorkel model UNO41

 Driving lights and tail lights
item part no qty description
1 3067619 2 Headlight, halogen flood
2 3060017 2 Light, turn signal
3 3020013 1 Switch, toggle
4 3011601 1 Wire, 16 gauge single conductor x 240 inch long
5 3040083 4 Terminal .250 tab female slip-on fully insulated 16/14 wire
6 3040082 4 Terminal .250 tab male slip-on fully insulated 16/14 wire
7 5093019 10 Clamp
8 3040068 1 Circuit breaker, 20 amp capacity
9 5560692 8 Machine screw #10-24 x 1 inch long pan head
10 5560034 9 Nut #10-24 self locking
11 0181376 1 Placard, light switch
12 5569003 2 Grommet
13 3040469 1 Relay, 12 volt DC
14 5560609 1 Machine screw #10-24 x 1/2 inch long truss head
15 3044599 1 Terminal .250 tab female slip-on insulated 22/18 wire
16 3044161 4 Terminal #10 stud insulated 16/14 wire
17 3044142 1 Terminal #6 stud insulated 22/18 wire
18 0071541 1 Jumper wire
19 0151817 2 Jumper wire
20 0181187 1 Jumper wire
21 0073252 1 Jumper wire
22 0073781 1 Jumper wire
23 3090019 1 Flexgard tube, 240 inch long
24 970029 10 Capscrew 1/4-20 x 3/4 inch long hex head grade 5
25 986019 10 Washer 1/4 medium flat
26 5560004 10 Nut 1/4-20 self locking
27 0073254 1 Diode jumper wire

UNO41 – 02-01 and after 4 - 11

 Dual fuel, Ford
item part no qty description
1 0152583 1 Dual fuel engine, Ford - (see page 4-15 for parts breakdown)
2 3020017 1 Switch, toggle
3 0090492 1 Placard, dual fuel switch
4 0090493 1 Decal, dual fuel instructions
5 0081441 1 Placard, caution liquid withdrawal
6 0070974 1 Coupler, female LPG
7 0070969-99 1 Bracket, LP gas cylinder - (includes left and right hand brackets)
8 0080672 2 LP gas fuel hose
9 0151909 2 Mount plate, LP cylinder bracket
10 Kit item 1 Straight thread adapter - (included in 0151899 dual fuel kit)
11 Kit item 1 Hydrostatic relief valve - (included in 0151899 dual fuel kit)
12 Kit item 1 Bulkhead tee - (included in 0151899 dual fuel kit)
13 9940018 1 LP gas cylinder, liquid withdrawal 43.5 lb capacity
14 970479 4 Capscrew 3/8-16 x 1-1/4 inch long hex head grade 5
15 986299 4 Washer 3/8 medium flat
16 5560033 4 Nut 3/8-16 self locking
17 5560655 4 Pop rivet #AD32-ABS

4 - 12 UNO41 – 02-01 and after

 9
9
VACUUM
SWITCH
80D

5C

77A

77B

FILTERLOCK
VIEW B-B
ENGINE GAUGE PANEL
ENGINE PARTS SHOWN
ROTATED 90° FOR CLARITY
FUEL SHUT MURPHY
OFF SOLENOID SWITCH
1 2
78 G NO NC S B

80D
3 FUEL SHUT
OFF VALVE
80C

80C
4

6 CHOKE

14 15 16
78
77A

77B

8 2
A
A 17

B B
12
9
11
8
11
12
TO FILTERLOCK
9 TO LP TANK

8
VIEW A-A 10 AW0152582

Dual fuel
Ford
Snorkel model UNO41 Page 4 - 13
 VIEW OF BOTTOM
REGULATOR FITTINGS
LOOKING FROM TOP
19

20

23

21 23
19

14
23 16
32

30
31
13
6
24 23
7
22 5
26 3
25 18 5
11

1
29 17

12
28
27

15
20 10
9

AW0152583
Dual fuel engine
Ford
Page 4 - 14 Snorkel model UNO41
 Dual fuel engine, Ford
item part no qty description
0152583 1 Dual fuel engine, Ford
1 0152499 1 Engine, Ford gasoline - (see page 1-33 for parts breakdown)
2 0151899 1 Dual fuel kit, liquid withdrawal - (kit includes items 3 through 11)
3 Kit item 1 Regulator
4 Kit item 1 Filterlock
5 Kit item 1 Hose adapter
6 Kit item 1 LP hose
7 Kit item 1 Street elbow 45° 3/8 NPT
8 Kit item 1 Elbow 90° male 1/4 NPT brass
9 Kit item 1 Street tee, 1/8 inch NPT
10 Kit item 1 Street 90° elbow, 1/8 inch NPT
11 Kit item 1 Connector
12 3020054 1 Vacuum switch - (included with engine)
8130005 1 Replacement switch
13 5230005 1 Gasoline fuel shut-off valve
14 3044146 1 Terminal #10 stud insulated 22/18 wire
15 3040083 1 Terminal .250 tab female slip-on fully insulated 16/14 wire
16 5090011 2 Nipple 1/8 NPT brass
17 5090024 1 Vacuum fitting 1/8 NPT brass straight
18 5550030 2 Clamp
19 5039601 2 Splice
20 5039501 2 Beaded 90° elbow
21 5010020 2 Fuel hose, 5/8 inch diameter x 24 inch long
22 5090044 1 Vacuum line tee
23 5550010 8 Clamp
24 5010007 1 Vacuum hose, 3/16 inch diameter x 9 inch long
25 970029 2 Capscrew 1/4-20 x 3/4 inch long hex head grade 5
26 987099 2 Washer 1/4 medium lock
27 970049 2 Capscrew 1/4-20 x 1 inch long hex head grade 5
28 5560004 2 Nut 1/4-20 self locking
29 0152629-99 1 Bracket, dual fuel
30 7630335 1 Shut-off solenoid
31 5560038 1 Nut #10-32 self locking
32 5090035 1 Vacuum fitting

UNO41 – 02-01 and after 4 - 15

 LP fuel only, Ford
item part no qty description
1 0152630 1 LP fuel engine, Ford - (see page 4-19 for parts breakdown)
2 0090493 1 Decal, dual fuel instructions
3 0081441 1 Placard, caution liquid withdrawal
4 0070974 1 Coupler, female LPG
5 0070969-99 1 Bracket, LP gas cylinder - (includes left and right hand brackets)
6 0080672 2 LP gas fuel hose
7 0151908-99 2 Mount plate, LP cylinder bracket
8 Kit item 1 Straight thread adapter - (included in 0151899 dual fuel kit)
9 Kit item 1 Hydrostatic relief valve - (included in 0151899 dual fuel kit)
10 Kit item 1 Bulkhead tee - (included in 0151899 dual fuel kit)
11 9940018 1 LP gas cylinder, liquid withdrawal 43.5 lb capacity
12 970479 4 Capscrew 3/8-16 x 1-1/4 inch long hex head grade 5
13 986299 4 Washer 3/8 medium flat
14 5560033 4 Nut 3/8-16 self locking

4 - 16 UNO41 – 02-01 and after

 VACUUM
9 9 SWITCH
80D

5C

77A

77B

FILTERLOCK

ENGINE GAUGE PANEL

MURPHY
VIEW B-B SWITCH

78 G NO NC S B

ENGINE PARTS SHOWN

80D
ROTATED 90° FOR CLARITY

1 80C

80C

14
13 CHOKE
12

78
4 77A

77B

3
10
8 A 9
A
B B
6

7
TO FILTERLOCK TO LP TANK

9 7 8
10 4
6

VIEW A-A

AW0152732

LP fuel only
Ford
Snorkel model UNO41 Page 4 - 17
 VIEW OF BOTTOM
REGULATOR FITTINGS
LOOKING FROM TOP
19

20

23

21

23
19
16

23

6
24
7 23
22
5 5
3
26 18
25 11

1
29 17

28 12
27

15
20
10
9

AW0152630

LP fuel engine
Ford
Page 4 - 18 Snorkel model UNO41
 LP fuel engine, Ford
item part no qty description
0152630 1 LP fuel engine, Ford
1 0152499 1 Engine, Ford gasoline - (see page 1-33 for parts breakdown)
2 0151899 1 Dual fuel kit, liquid withdrawal - (kit includes items 3 through 11)
3 Kit item 1 Regulator
4 Kit item 1 Filterlock
5 Kit item 1 Hose adapter
6 Kit item 1 LP hose
7 Kit item 1 Street elbow 45° 3/8 NPT
8 Kit item 1 Elbow 90° male 1/4 NPT brass
9 Kit item 1 Street tee, 1/8 inch NPT
10 Kit item 1 Street 90° elbow, 1/8 inch NPT
11 Kit item 1 Connector
12 3020054 1 Vacuum switch - (included with engine)
8130005 1 Replacement switch
13 0152629-99 1 Bracket, dual fuel
14 3044146 1 Terminal #10 stud insulated 22/18 wire
15 3040083 1 Terminal .250 tab female slip-on fully insulated 16/14 wire
16 7710013 1 Pipe plug 1/8 NPT square head
17 5090024 1 Vacuum fitting 1/8 NPT brass straight
18 5550030 2 Clamp
19 5039601 2 Splice
20 5039501 2 Beaded 90° elbow
21 5010020 1 Fuel hose, 5/8 inch diameter x 24 inch long
22 5090044 1 Vacuum line tee
23 5550010 8 Clamp
24 5010007 1 Vacuum hose, 3/16 inch diameter x 9 inch long
25 970029 2 Capscrew 1/4-20 x 3/4 inch long hex head grade 5
26 987099 2 Washer 1/4 medium lock
27 970049 2 Capscrew 1/4-20 x 1 inch long hex head grade 5
28 5560004 2 Nut 1/4-20 self locking

UNO41 – 02-01 and after 4 - 19

 Engine block heater
item part no qty description
1 7630338 1 Engine block heater, Ford VSG-413 engine
7630287 1 Engine block heater, Kubota engine
2 0181634 1 Decal, engine block heater - (decal located as close to plug as possible)

Ford engine

Kubota engine AWM00260

4 - 20 UNO41 – 02-01 and after

 Lanyard anchor, platform floor
item part no qty description
1 0360892 2 Tie down D ring
2 0360891 2 Bracket, lanyard attachment
3 0360893 2 Plate, lanyard attachment
4 5560704 4 Capscrew 3/8-16 x 1-1/4 inch long hex head grade 8
5 986299 4 Washer 3/8 medium flat
6 5560033 4 Nut 3/8-16 self locking
7 0150448 2 Decal, attach fall restraint

1 2

3 4
5
6

AWA15073B

UNO41 – 02-01 and after 4 - 21

 Motion alarm
item part no qty description
1 3040593 1 Alarm, drive motion
2 3046972 1 Terminal .188 tab female slip-on insulated 22/18 wire
3 3044142 1 Terminal #6 stud insulated 22/18 wire
4 0152536 1 Jumper wire
5 0152537 1 Jumper wire
6 974679 4 Machine screw #10-24 x 5/8 inch long round head
7 987089 4 Washer #10 medium lock
8 984049 4 Nut #10-24 hex

3
1
4 Control
Wire #2

Wiring box

16B
16A

11A
16

39
5

Turntable wire

6
7
8

AWM00307

4 - 22 UNO41 – 02-01 and after

 Operator horn
item part no qty description
1 3040127 1 Horn, 12 volt DC
2 3040128 1 Horn relay, 12 volt DC
3 3026027 1 Switch, push button
4 7140092 1 Switch seal
5 0071269 1 Placard, horn
6 0151557 2 Jumper wire
7 0110596 2 Jumper wire
8 0152388 1 Jumper wire
9 3044599 2 Terminal .250 tab female slip-on insulated 22/18 wire
10 5560655 2 Pop rivet #AD32-ABS
11 970009 2 Capscrew 1/4-20 x 1/2 inch long hex head grade 5
12 5560004 2 Nut 1/4-20 self locking

6 10
1

29

34
7 43
Upper control box wiring Upper control box
5
7
2
9 6 1
H
B
S
Wiring box 29

18 gauge boom wire

11
1 12

Horn mounted on turntable AWM00308

UNO41 – 02-01 and after 4 - 23

 Tool tray
item part no qty description
1 0150701 1 Tote box
2 0151539-99 2 Side bar, inner
3 0153058-99 1 Support gusset, right hand
4 0153060-99 1 Support gusset, left hand
5 970069 4 Capscrew 1/4-20 x 1-1/4 inch long hex head grade 5
6 5560004 4 Nut 1/4-20 self locking
7 986019 8 Washer 1/4 medium flat
8 5560648 2 Machine screw #10-24 x 3/4 inch long truss head
9 5560034 2 Nut #10-24 self locking
10 986009 2 Washer #10 medium flat
11 5510011 2 Spring clip
12 5560082 1 Trim lock, 1/4 inch x 9 inch long

12 6
5
4
1

10
9
11 8

AW0153056

4 - 24 UNO41 – 02-01 and after

 Tow package
item part no qty description
1 0152346-99 1 Tow bar
2 0111464-99 1 Bracket, chassis
3 0152348-99 1 Tie rod
4 0111465-99 1 Tie rod end
5 0152350 1 Lug
6 0111520-99 1 Rotator stop
7 0152353-99 1 Tow bar cradle, front
8 0152351-99 1 Tow bar cradle, rear
9 0110836-99 2 Drag link storage cradle
10 0110943 1 Pin, drag link
11 0110833 1 Pin, drag link
12 0110831 1 Pin, tow bar
13 0072203 2 Decal, towing instructions
14 0090760 1 Decal, float valve
15 5550005 1 Clamp
16 5580002 1 Snapper pin
17 5561550 2 Hairpin clip pin
18 2690001 1 Bearing, self aligning
19 5036105 1 Straight thread run tee
20 5064001 1 Tube end reducer
21 5063905 1 Fitting nut
22 5065707 2 Straight thread adapter
23 5036705 3 Swivel nut run tee
24 5037005 2 Swivel nut 90° elbow
25 5065705 1 Straight thread adapter
26 0020266 2 3/8 inch hydraulic hose
27 0020277 1 3/8 inch hydraulic hose
28 0152745 2 Back plate
29 0070839 1 1/4 inch hydraulic hose
30 5560189 1 Roll pin 3/16 inch diameter x 1-1/4 inch long
31 6010616 1 Steering float valve
32 971009 2 Capscrew 1/2-13 x 4 inch long hex head grade 5
33 5560647 2 Capscrew 1/2-13 x 5 inch long hex head grade 5
34 5560039 4 Nut 1/2-13 self locking
35 970239 2 Capscrew 5/16-18 x 3/4 inch long hex head grade 5
36 986269 4 Washer 5/16 medium flat
37 987109 2 Washer 5/16 medium lock
38 984089 2 Nut 5/16-18 hex
39 970029 2 Capscrew 1/4-20 x 3/4 inch long hex head grade 5
40 986019 4 Washer 1/4 medium flat
41 987099 4 Washer 1/4 medium lock
42 5569886 2 Capscrew 1/4-20 x 1-3/4 inch long hex head grade 5
43 984069 2 Nut 1/4-20 hex
44 0152354-99 1 Float valve mount bracket
45 5560662 10 Drive screw #4 x 1/4 inch long PK type U
46 0070795 2 1/4 inch hydraulic hose
47 5035305 2 Straight thread 90° elbow
48 7714301 1 Pipe plug 1/8 NPT hollow hex

4 - 26 UNO41 – 02-01 and after

 45
14 8

31 7
13 45
B

B
35
47 36
37
38
TOP VIEW OF TURNTABLE
23 24
23
HYDRAULIC OIL
RETURN FLITER

TO DRIVE VALVE

A 23 TO TRNTBL PKG VALVE

A 47
15 27
10 12 29
17 16
18 25 21
30 22 20
3
10
6 4 26 24
30 19
11 FLOAT
17 5 VALVE
46
18 26
TO BULKHEAD TEE'S
1 17

SECTION A-A LH STEER CYLINDER

43 33 34
34 9 42
32 41
28 40

48

45 13 SECTION B-B
5 2 44
39
40 AW0152345
41
Tow package

Snorkel model UNO41 Page 4 - 27

 Warning lights
item part no qty description
1 3060083 1 Warning light, amber lens
3060084 1 Warning light, red lens
8160047 1 Replacement bulb
2 3040300 1 Connector
3 3040070 1 Connector locknut
4 3011802 1 Wire 18 gauge, 2 conductor x 324 inch long
5 3040046 1 Terminal .250 tab male slip-on fully insulated 22/18 wire
6 3044599 1 Terminal .250 tab female slip-on insulated 22/18 wire
7 5560082 1 Trim lock, 1/4 inch x 36 inch long
8 987099 1 Washer 1/4 medium lock
9 5093019 3 Clamp
10 0150539-99 1 Mounting bracket
11 3044146 3 Terminal #10 stud insulated 22/18 wire
12 970009 1 Capscrew 1/4-20 x 1/2 inch long hex head grade 5
13 5560708 4 Pop rivet #AD46-ABS
14 5560004 1 Nut 1/4-20 self locking
15 986019 1 Washer 1/4 medium flat
16 970099 1 Capscrew 1/4-20 x 5/8 inch long hex head grade 5

4 - 28 UNO41 – 02-01 and after

 1

10
11
9
16
14 15
13
47
5

9 6
7

8
12
15

10 16
15
14
9 7 4A 47
13 WHT

11

3
3

BLK
9 8
12
15

2
3

AW0151003

Warning lights

Snorkel model UNO41 Page 4 - 29

 14
9 14 8
8

3
10

ACC
START 1 1
SWITCH
14

4 8

UPPER CONTROL BOX 13 12

TOP VIEW

11
1

25
3 6 7
2

52
76

15 2

AW0151247

Work lights

Page 4 - 30 Snorkel model UNO41

 Work lights
item part no qty description
1 3064413 2 Light, incandescent with clamp bracket
3067620 2 Light, halogen with clamp bracket
2 5093002 6 Clamp
3 3090006 1 Flexgard tube, 60 inch long
4 5569003 1 Grommet
5 970029 4 Capscrew 1/4-20 x 3/4 inch long hex head grade 5
6 987099 4 Washer 1/4 medium lock
7 986019 4 Washer 1/4 medium flat
8 3040082 3 Terminal .250 tab male slip-on fully insulated 16/14 wire
9 3011601 1 Wire, 16 gauge single conductor x 120 inch long
10 3040114 1 Connector, in-line 16/14 wire
11 3044160 1 Terminal #10 stud insulated 16/14 wire
12 3040038 1 Fuse holder, in-line
13 3040039 1 Fuse, 10 amp capacity
14 3040083 3 Terminal .250 tab female slip-on fully insulated 16/14 wire
15 970479 2 Capscrew 3/8-16 x 1-1/4 inch long hex head grade 5
16 3060088 2 Lamp, 24 volt DC

UNO41 – 02-01 and after 4 - 31

 Upper control box cover
item part no qty description
1 0152685 1 Cover, upper control box
(vinyl coated nylon cover, includes mounting snaps)

AW0152685

4 - 32 UNO41 – 02-01 and after

 index
A Decal, attach fall restraint, 1-42, 4-21
Decal, caution governor damage, 1-42
AC generator, 4-2, 4-7
Decal, control, 3-16, 3-19
AC generator valve, 2-20, 4-7
Decal, danger cylinder failure, 1-42
Accumulator, 2-21, 2-22
Decal, danger descending boom, 1-42
Accumulator, chassis, 2-2, 2-21
Decal, danger electrical hazard, 1-42
Accumulator, turntable, 2-22
Decal, danger rotating engine parts, 1-42
Add-on valve, 2-11, 2-14
Decal, danger you must not operate, 1-42
Adjustment bar, 1-34
Decal, diesel fuel, 1-42
Adjustment bolt, 1-7
Decal, diode, 3-16
Air cleaner, 1-33, 1-39, 1-41
Decal, directional arrows, 1-42
Air cleaner service indicator, 1-33, 1-39
Decal, directional arrows forward/reverse, 1-42
Air hose, 4-8
Decal, do not use ether, 1-42
Air inlet elbow, 1-33, 1-40
Decal, dual fuel instructions, 4-12, 4-16
Air inlet tube, 1-33, 1-34, 1-39, 1-40
Decal, emergency manual bleed down, 1-42
Air intake gasket, 1-34
Decal, engine block heater, 4-20
Air intake hose, 1-34
Decal, float valve, 4-26
Alarm, drive motion, 4-22
Decal, gasoline fuel, 1-42
Ammeter, 3-32
Decal, gauge panel, 3-27
Angle, air hose, 4-8
Decal, hydraulic oil, 1-42
B Decal, lift and pull, 1-42
Decal, lube recommendations, 1-42
Base boom, 1-15 Decal, lug nut torque, 1-42
Battery hold down, 3-6, 3-9 Decal, OmniQuip logo, 1-42
Battery hold down bolt, 3-6, 3-9 Decal, power, 3-16, 3-19
Battery, 12 volt DC - 550 CCA, 3-6, 3-9 Decal, rotate while greasing, 1-2
Bearing, self aligning, 1-4, 4-26 Decal, Snorkel brand logo, 1-42
Boom switch, Ford, 3-6, 3-36 Decal, steer circuit, 3-2, 3-5
Boom switch, Kubota, 3-9, 3-37 Decal, terminal strip, 3-12, 3-15, 3-16, 3-19, 3-20, 3-24, 3-32
Brace, muffler, 1-34, 1-40 Decal, towing instructions, 4-26
Brace, tail pipe, 1-33, 1-40 Decal, UNO41 logo, 1-42
Bracket, chassis, 4-26 Diagnostic nipple, 2-11, 2-23, 2-57
Bracket, LP gas cylinder, 4-12, 4-16 Diode stand off, 3-16
Document tube, 1-42
C Door latch, 1-23
Cable guide, 4 roller, 4-8 Drag link storage cradle, 4-26
Cable, 110 volt power, 4-2 Drive control valve, 2-2, 2-16
Cable, 110 volt power to platform, 3-40 Drive wheel, 1-50
Cartridge holding valve, 1-18, 2-24, 2-27, 2-29, 2-35, 2-40 Dual counterbalance valve, 2-16, 2-45
Cartridge valve, 3-way , 2-60 Dual fuel engine, Ford, 4-15
Cartridge valve, 3-way inlet, 2-12 Dual fuel kit, liquid withdrawal, 4-15, 4-19
Check valve, 2-2, 2-23
Check valve cartridge, 2-12
E
Circuit breaker, 15 amp capacity, 3-27, 3-40, 4-2 Electrical hazard
Circuit breaker, 20 amp capacity, 3-20, 3-24, 4-11 See inside front cover
Circuit breaker, 25 amp capacity, 3-27, 3-32 Electrical outlet box, 3-40
Clevis pin, 1-39 Electrical outlet, GFCI - 20 amp capacity, 3-40
Control valve package, 2-11, 2-12 Emergency power motor/pump, 2-46
Control valve, drive, 2-15, 2-16 Emergency power pump, 2-2, 2-46
Control wire #1, 1-16 Engine adapter, Ford engine, 1-39
Control wire #2, 1-16 Engine block heater, 4-20
Controller, drive, 3-42 Engine gauge panel, Ford, 3-2, 3-27
Corrosion inhibitor, 3-12, 3-15, 3-20, 3-24 Engine gauge panel, Kubota, 3-5, 3-32
Coupler, female LPG, 4-12, 4-16 Engine mount, 1-30, 1-36
Cover, electrical outlet, 3-40 Engine mount washer, 1-30, 1-36
Cylinder, boom lift, 2-27, 2-28, 2-29, 2-30, 2-31, 2-32, 2-33 Engine, Ford gasoline, 1-30, 1-33
Cylinder, extension, 1-18, 1-19, 2-35 Engine, Ford VSG-413 gasoline, 1-33
Cylinder, lower boom lift, 2-24, 2-25, 2-26 Engine, Kubota diesel, 1-36, 1-39
Cylinder, master level, 2-36, 2-37, 2-38, 2-39 Exhaust adapter, 1-34
Cylinder, slave level, 2-40, 2-41, 2-42, 2-43 Exhaust flange, 1-33, 1-40
Cylinder, steering, 1-4 Exhaust tube, 1-40
Extend cylinder, 1-15, 1-18, 1-19
D
Decal set, non-proportional control valve, 2-11
F
Decal, 125 volt 15 amp power to platform, 1-42, 3-2, 3-5, Filter, sump strainer, 2-51
3-40, 4-2 Float valve mount bracket, 4-26
Decal, 4 inch stripe, 1-42 Floating turret, lower, 1-10
Decal, 4 x 4 logo, 1-42 Floating turret, upper, 1-10
Decal, 41 logo, 1-42 Flotation drive wheel, 1-50

UNO41 – 02-01 and after index 1

 Index
Flow divider, 2-18, 2-47 Motor mount, right rear, 1-39
Flywheel housing coupling kit, 1-33 Mount plate, overflow reservoir, 1-30
Fuel gauge, 1-8 Mount, left hand, 1-33
Fuel hose, 1-30, 1-34, 1-40, 4-15, 4-19 Mount, master level cylinder, 2-36
Fuel hose assembly, 1-36 Mount, right hand, 1-33
Fuel primer bulb, 1-36 Mounting band, air cleaner, 1-33, 1-39
Fuel tank strap, 1-8, 1-9 Mounting bracket, air cleaner, 1-33
Fuel tank, 20 gallon capacity, 1-8 Mounting bracket, wiring box, 3-6, 3-9
Fuse holder, in-line, 4-31 Muffler, standard, 1-34, 1-40
Fuse, 10 amp capacity, 3-32, 4-31
O
G Overflow reservoir, 1-30, 1-39
Gasoline fuel shut-off valve, 4-15
Gear flow divider, 2-2, 2-48 P
Gear hub, drive, 1-3, 1-44
Package valve, Vickers, 2-11
Gear hub, steer, 1-4, 1-46
Pad stop bar, 1-15
Gravity gate, 1-20
Panel, engine gauge, 3-27, 3-32
Grommet, 4-31
Pin lock, 1-10, 1-20, 1-23
Pin, drag link, 4-26
H Pin, gate hinge, 1-23
Hairpin clip pin, 4-26 Pin, master level cylinder to mount plate, 2-36
Headlight, halogen flood, 4-11 Pin, tow bar, 4-26
High-low speed valve, 2-2, 2-49 Placard, 125 volts 15 amps, 1-42, 3-40
Horn relay, 12 volt DC, 4-23 Placard, AC generator, 4-2
Horn, 12 volt DC, 4-23 Placard, ANSI standard, 1-42
Hose carrier, 1-12 Placard, battery disconnect switch, 3-6, 3-9
Hour meter, 3-27, 3-32 Placard, caution liquid withdrawal, 4-12, 4-16
Hydraulic drive motor, 1-4, 2-52, 2-54 Placard, caution operating instructions, 1-42
Hydraulic motor and brake, 1-3, 2-50 Placard, caution serial number, 1-42
Hydraulic oil filter, 2-56 Placard, choke, 1-42
Hydraulic oil reservoir, 1-9, 2-51 Placard, circuit breaker, 3-28, 3-32
Hydraulic oil return filter, 2-2, 2-56 Placard, control box front, 3-20, 3-24
Hydraulic pump, 2-57 Placard, control box top, 3-20, 3-24
Hydraulic pump and fittings, 1-33, 1-39, 2-57 Placard, danger foam filled tires, 1-42
Placard, dual fuel switch, 4-12
I Placard, emergency bleed down valve, 1-42
Placard, engine protection system, 3-27
Insulator boot, 3-2, 3-5, 3-6, 3-9, 3-27, 3-28
Placard, engine rpm, 1-42
K Placard, horn, 4-23
Placard, light switch, 4-11
Knob, gate hinge pin, 1-23 Placard, lug nut torque, 1-42
Placard, platform capacity 500 pounds, 1-42
L Placard, platform identification, 1-42
Latch stop, 1-23 Placard, preheat 10 seconds, 1-42
Light, halogen with clamp bracket, 4-31 Placard, tire pressure, 1-42
Light, incandescent with clamp bracket, 4-31 Placard, wiring box, 3-12, 3-15
Light, turn signal, 4-11 Plastic track link, 1-16
Limit switch lever, 3-36, 3-37 Platform foot switch, 3-10, 3-35
Liquid level gauge with thermometer, 2-51 Platform rotation gear box, 1-20, 1-24
Lock pin, 1-4 Power wire, 1-16
Lower boom, 1-10 Pressure switch, 2-6, 2-61
Lower boom lift cylinder, 1-10, 2-24 Pylon mount, 1-20, 1-23
LP fuel engine, Ford, 4-16, 4-19
LP gas cylinder, liquid withdrawal, 4-12, 4-16 R
LP gas fuel hose, 4-12, 4-16 Radiator cap, 1-30, 1-36
Lug nut, 1-50 Radiator cushion, 1-30, 1-36
Radiator mount, 1-30, 1-36
M Radiator mounting bracket, 1-30, 1-36
Manual bleed down cartridge valve, 2-24, 2-27, 2-29 Radiator overflow hose, 1-30, 1-36
Manual rotation crank, 1-20, 1-23 Record pouch, 1-42
Master level cylinder, 1-10, 2-36 Relay, 12 volt DC, 3-15, 3-16, 3-19, 3-27, 3-32, 4-11
Middle boom, 1-10 Roller spacer, aluminum gravity gate, 1-20
Middle boom lift cylinder, 1-10 Roller, aluminum gravity gate, 1-20
Middle boom lift cylinder, 2-27, 2-28 Rotation bearing, 1-2
Mini siren, engine alarm, 3-20, 3-24 Rotator stop, 4-26
Motor mount, left front, 1-39 Rubber bumper, 1-28
Motor mount, left rear, 1-39 Rubber door latch, 1-26, 1-28
Motor mount, right front, 1-39

index 2 UNO41 – 02-01 and after

 Index

S W
Sense line dump valve, 1-33, 1-39, 2-58 Warning light, 4-28
Shuttle valve cartridge, 2-12 Warranty
Siren, tilt alarm, 3-20, 3-24 See inside back cover
Slave level cylinder, 1-15, 2-40 Wire harness, 110 volt power, 3-2, 3-5, 3-40
Slave level cylinder mount, 1-15 Wire harness, AC generator, 4-2
Slide pad, 1-10, 1-12, 1-15, 1-18, 1-19, 1-26, 1-28 Wire harness, alternator connector, 3-2
Slide pad mount, 1-15 Wire harness, boom switch, 3-36, 3-37
Slide pad mounting bar, 1-12 Wire harness, chassis drive, 3-2, 3-5
Slide pad shim, 1-15 Wire harness, chassis/turntable, 3-2, 3-5, 3-6, 3-9, 3-27,
Slide pad spacer, 1-15 3-32
Slide pad track, 1-12 Wire harness, Ford engine, 3-2, 3-27
Solenoid valve, 2-58 Wire harness, high-low speed, 3-2, 3-5
Solenoid valve and coil, 2-11, 2-12 Wire harness, Kubota engine, 3-5, 3-32
Solenoid valve, high-low shift, 2-49, 2-59 Wire harness, platform foot switch, 3-35
Spacer, tie rod mounting, 1-4 Wire harness, shift signal, 3-2, 3-5, 3-28, 3-32
Spring, torsion, 1-23 Wire harness, steer switch, 3-38, 3-39
Steer switch, left hand, 3-2, 3-5, 3-38 Wire harness, turntable, 3-6, 3-9
Steer switch, right hand, 3-2, 3-5, 3-39 Wire harness, upper control box internal, 3-20, 3-24
Steer yoke, left hand, 1-4 Wire harness, wiring box internal, 3-12, 3-15
Steer yoke, right hand, 1-4 Wiring box panel, Ford, 3-16
Steering float valve, 4-26 Wiring box panel, Kubota, 3-19
Swing drive, 1-7, 1-48 Wiring box, Ford, 3-6, 3-12
Swing drive motor, 1-7 Wiring box, Kubota, 3-9, 3-15
Swinging gate, aluminum platform, 1-23
Switch knob, 3-12, 3-15, 3-20, 3-24
Switch seal, 3-15, 3-24, 4-23
Switch, anti-restart, 3-20, 3-24
Switch, battery disconnect, 3-6, 3-9
Switch, emergency stop push/pull, 3-12, 3-15, 3-20, 3-24
Switch, keyed start, 3-12, 3-15
Switch, magnetic, 3-27, 3-32
Switch, oil pressure, 1-33, 1-40
Switch, pressure, 2-61
Switch, push button, 3-15, 3-24, 4-23
Switch, toggle, 3-12, 3-15, 3-20, 3-24, 4-2, 4-11, 4-12

T
Tail pipe, 1-33, 1-40
Temperature gauge, 3-27, 3-32
Terminal strip, 12 circuit .188 tab slip-on, 3-16, 3-19
Tie rod, 1-4
Tie rod end, 1-4, 4-26
Tilt alarm sensor 5°, 3-6, 3-9
Tip Boom, 1-15
Tire and wheel, flotation, 1-50
Tire and wheel, left hand drive, 1-50
Tire and wheel, right hand drive, 1-50
Tow bar, 4-26
Transmission valve, 2-2, 2-18
Transmission valve package, 2-60
Turret hose guard, 2-8

U
Upper boom, 1-12, 1-15
Upper boom and hose carrier, 1-12
Upper boom lift cylinder, 1-10, 2-29
Upper control box handrail, 1-20, 1-23
Upper control box, Ford, 3-10, 3-20
Upper control box, Kubota, 3-10, 3-24

V
Vacuum hose, 1-33, 4-15, 4-19
Vacuum switch, 4-15, 4-19
V-belt, 1-34

UNO41 – 02-01 and after index 3

 LIMITED WARRANTY
Snorkel warrants each new machine manufactured and sold by it to be free from defects in material and workmanship for a
period of one (1) year from date of delivery to a Customer or for one year after the machine has been placed in first service in a
Dealer rental fleet, whichever comes first. Any part or parts which, upon examination by the Snorkel Service Department, are
found to be defective, will be replaced or repaired, at the sole discretion of Snorkel, through its local Authorized Dealer at no
charge.
Snorkel further warrants the structural components; specifically, the mainframe chassis, turntable, booms and scissor arms,
of each new machine manufactured by it to be free from defects in material and workmanship for an additional period of four
(4) years. Any such part or parts which, upon examination by the Snorkel Service Department, are found to be defective will
be replaced or repaired by Snorkel through its local Authorized Dealer at no charge; however, any labor charges incurred as a
result of such replacement or repair will be the responsibility of the Customer or Dealer.
The Snorkel Service Department must be notified within forty-eight (48) hours of any possible warranty situation during the
applicable warranty period. Personnel performing warranty repair or replacement must obtain specific approval by Snorkel
Service Department prior to performing any warranty repair or replacement.
Customer and Dealer shall not be entitled to the benefits of this warranty and Snorkel shall have no obligations hereunder
unless the “Pre-Delivery and Inspection Report” has been properly completed and returned to the Snorkel Service
Department within ten (10) days after delivery of the Snorkel product to Customer or Dealer’s rental fleet. Snorkel must be
notified, in writing, within ten (10) days, of any machine sold to a Customer from a Dealer’s rental fleet during the warranty
period.
At the direction of the Snorkel Service Department, any component part(s) of Snorkel products to be replaced or repaired
under this warranty program must be returned freight prepaid to the Snorkel Service Department for inspection. All warranty
replacement parts will be shipped freight prepaid (standard ground) from the Snorkel Service Department or from Snorkel’s
Vendor to Dealer or Customer.

REPLACEMENT PARTS WARRANTY

Any replacement or service part made or sold by Snorkel is not subject to the preceding Limited Warranty beyond the
normal warranty period of the machine upon which the part was installed.

THIS WARRANTY EXCLUDES AND SNORKEL DOES NOT WARRANT:

1. Engines, motors, tires and batteries which are manufactured by suppliers to Snorkel, who furnish their own warranty.
Snorkel will, however, to the extent permitted, pass through any such warranty protection to the Customer or Dealer.
2. Any Snorkel product which has been modified or altered outside Snorkel’s factory without Snorkel’s written approval, if
such modification or alteration, in the sole judgment of Snorkel’s Engineering and/or Service Departments, adversely
affects the stability, reliability or service life of the Snorkel product or any component thereof.
3. Any Snorkel product which has been subject to misuse, improper maintenance or accident. “Misuse” includes but is not
limited to operation beyond the factory-rated load capacity and speeds. “Improper maintenance” includes but is not
limited to failure to follow the recommendationscontained in the Snorkel Operation, Maintenance, Repair Parts Manuals.
Snorkel is not responsible for normal maintenance, service adjustments and replacements, including but not limited to
hydraulic fluid, filters and lubrication.
4. Normal wear of any Snorkel component part(s). Normal wear of component parts may vary with the type application or
type of environment in which the machine may be used; such as, but not limited to sandblasting applications.
5. Any Snorkel product that has come in direct contact with any chemical or abrasive material.
6. Incidental or consequential expenses, losses, or damages related to any part or equipment failure, including but not
limited to freight cost to transport the machine to a repair facility, downtime of the machine, lost time for workers, lost
orders, lost rental revenue, lost profits or increased cost.
This warranty is expressly in lieu of all other warranties, representations or liabilities of Snorkel, either expressed or implied,
unless otherwise amended in writing by Snorkel’s President, Vice President-Engineering, Vice President-Sales or Vice
President-Marketing.
SNORKEL MAKES NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION OF THIS LIMITED WARRANTY.
SNORKEL MAKES NO IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
AND DISCLAIMS ALL LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT
LIMITED TO INJURY TO PERSONS OR PROPERTY.
The Customer shall make all warranty claims through its local Authorized Dealer and should contact the Dealer from whom
the Snorkel product was purchased for warranty service. Or, if unable to contact the Dealer, contact the Snorkel Service
Department for further assistance.

Effective July 1995

 Maintenance and Schematics

Maintenance information
The parts drawings located in the repair parts sections, Parts should be thoroughly inspected before restoring to
are designed for use as a guide for proper disassembly service at the time of reassembly. Burrs, nicks or
of the machine and components as well as for parts re- scratches may be removed from machined surfaces by
placement. Always refer to the hydraulic system installa- honing or polishing with #600 crocus cloth, followed by a
tion drawings and the electrical wiring diagram before thorough cleaning in an approved cleaning solvent, and
removing or disassembling associated parts. blown dry with compressed air. Do not alter the contour
of any part. If this operation does not restore the part to a
CAUTION serviceable condition, replace the part. Replace all
Do not attempt to disconnect or remove any hydrau- O-rings, seals, and gaskets at reassembly. Use new roll
lic line before reading and understanding all text pins or cotter pins. Dip all packing rings and seals in hy-
concerning the system hydraulics. In most cases, draulic oil before reassembling in cylinder and manifold
disassembly of the machine will be obvious from the installations. Replace any part having imperfect threads.
illustration. In general, units that have been disassembled can be
reassembled by reversing the order of disassembly.
When disassembling or reassembling components,
complete the procedural steps in sequence. Do not par- Remember that the service life of a machine can be in-
tially disassemble or assemble one part, then start on creased by keeping dirt and foreign materials out of the
another. Always check your work to assure that nothing vital components. Precautions have been taken to safe-
has been overlooked. guard against this; shields, covers, seals and filters are
provided to keep air and oil supplies clean; however,
The following list is a gentle reminder when disassem-
these items must be maintained on a scheduled basis in
bling or assembling the machine.
order to function properly.
ü Always be conscious of weight. At any time air or oil lines are disconnected, clean sur-
ü Never attempt to lift heavy objects without the aid of rounding areas as well as the opening and fittings them-
a mechanical device. selves. As soon as a line or component is disconnected,

ü Do not allow heavy objects to rest in an unstable cap or cover all openings to prevent the entry of dirt or
foreign materials.
condition.
New parts should remain in their container until they are
ü Always make sure work platform is in stowed ready to be used.
position - blocked or the weight removed by a
suitable lifting device before disconnecting the Clearly mark or tag hydraulic lines and electrical wiring
hydraulic hose from the motor/pump unit to the lift connections when disconnecting or removing them from
cylinder. unit. This will assure that they are correctly reinstalled.

ü When raising a portion of the machine, be sure that Proper assembly is critical to the successful rebuilding
of any unit. Carefully inspect any parts which are to be
adequate blocking is properly positioned - Do not
reused. If in doubt, replace.
depend on lifting device to hold and secure weight.
ü If a part resists removal, check to see if all “SAFETY FIRST” is a good slogan.
fasteners, electrical wiring, hydraulic lines, etc., Replace any guards and protective devices that have
have been removed or that other parts are not been removed to carry out maintenance and repair
interfering. work.

UNO41 – revised December 2001 1

 Maintenance schedules
Snorkel has established a Preventive Maintenance They also require that all placards and decals on the unit
Schedule that includes Daily Maintenance (Operator's are to be inspected.
Inspection), 90 Day or 150 Hour (frequent) Maintenance
All placards and decals must be in place and legible. Use
and Yearly or 500 Hour (annual) Maintenance, to detect
the placards installation drawing and parts listing in the
any defective, damaged or improperly secured parts
repair parts section 1 of this manual to check these plac-
and provide information regarding lubrication and other
ards and decals.
minor maintenance items.
Snorkel recommends that you make additional copies of
The Maintenance Schedule following, outlines the re-
the Preventive Inspection Maintenance Checklist forms
quirements of these maintenance checks for each time
for your use in performing these inspections.
interval. The Operator's Daily Maintenance and inspec-
tion must be performed by a trained operator. All other
maintenance and inspections must be performed by a
DANGER
Failure to perform the Preventive Maintenance at
trained service technician only.
the intervals outlined in the Maintenance Schedule
Note that the 90 Day or 150 hour (frequent) and yearly or may result in a unit being operated with a defect that
500 hour (annual) Maintenance, require use of the Pre- could result in INJURY or DEATH of the unit opera-
ventive Inspection Maintenance Checklist to pinpoint all tor. Do not allow a unit to be operated that has been
inspection items. Retain a copy of these forms for your found to be defective.
records.
Repair all defects before returning the unit to service.

Daily maintenance (operator’s inspection)

Components Service Required
Emergency power motor/pump Check operation
Air filter Check condition
Engine oil Check oil level
Fuel leaks Visually inspect (hoses, connections, etc.)
Fuel tank cap Visually inspect (installation)
Engine coolant Check fluid level
Engine fuel level Check fuel gauge
Bolts and fasteners Visually inspect (looseness)
Platform gate Visually inspect (operation)
Slide pads Visually inspect (boom wear marks)
Structural damage and welds Visually inspect (weld cracks, dents)
Tires and wheels Visually inspect (condition)
Battery fluid level Check fluid level
Battery terminals Visually inspect (corrosion)
Charging system Visually inspect (belt, gauge)
Control switches Visually inspect (operation)
Personal protective devices Visually inspect (installation, condition)
Wiring harnesses Visually inspect (installation, condition)
Hydraulic leaks Visually inspect (hoses, tubes, fittings)
Hydraulic oil Check fluid level
Operator's manual Visually inspect (on machine in document holder)
Placards and decals Visually inspect (installation, condition)

2 UNO41 – revised December 2001

 Maintenance schedules
90 day or 150 hour maintenance (trained service technician)
Components Service Required Recommended Lubricant or
Further Instructions
Daily maintenance Perform maintenance as per schedule
Preventive inspection mainte- Perform inspection, complete form Retain copy of checklist
nance checklist
Placards and decals inspection Inspect using drawing and parts listing Replace any missing or unread-
in section 1 (repair parts) able decals/placards
Door hinges and latches Lubricate SAE 10W oil or spray lubricant
Rotation bearing Lubricate Conoco Super Sta #2
Above 32° Mobilgrease CM-P
Below 32° Mobilgrease CM-L
Rotation bearing teeth & pinion Lubricate Mobil Mobiltac 375NC
Tie rods Lubricate Conoco Super Sta #2
Above 32° Mobilgrease CM-P
Below 32° Mobilgrease CM-L
Pump coupling, (Kubota units) Lubricate Conoco M-EP
Drive gear reducer Check fluid level, fill if low Mobil Mobilube HD 80W-90
Gear hubs Check fluid level, fill if low Mobil Mobilube HD 80W-90
Swing drive Check fluid level, fill if low Mobil Mobilube HD 80W-90
Platform rotation gear box Check fluid level, fill if low Mobil Mobilube HD 80W-90
Platform controller Check smooth operation & speeds
Batteries Check specific gravity 1.260/1.275 at 80° F.
Charging system Check operation
Engine RPM Check for proper engine RPM See engine manufactures
Engine oil and filter Replace per engine owners manual owner's manual

Engine fuel filter Check condition Replace every 6 months or if dirty

Yearly or 500 hour maintenance (trained service technician

Components Service Required Recommended Lubricant or
Further Instructions
90 day or 150 hour maintenance Perform maintenance per schedule
Hydraulic oil reservoir Clean and replace fluid Above 10° Mobil DTE-13M
Below 10° Mobil DTE-11M
Hydraulic return filter Replace After 1st. 50 hours, thereafter
at recommended interval
Hydraulic reservoir suction filter Clean and reinstall
Hydraulic pressures Check pressures
Drive gear reducer Replace fluid Mobil Mobilube HD 80W-90
Gear hubs Replace fluid Mobil Mobilube HD 80W-90
Swing drive Replace fluid Mobil Mobilube HD 80W-90
Engine coolant Check Condition See engine manufacturer's
owner's manual
Wheel bearings Clean and repack Conoco Super Sta #2
Above 32° Mobilgrease CM-P
Below 32° Mobilgrease CM-L

UNO41 – revised December 2001 3

 Service information
Lubrication illustration
11
8 10
6 9

Slide pads
Steer 1 Drive do not lubricate
3 2 5 7
4 12

The illustration locates the lubrication points of the UNO41.

Lubricants Tie rods

Specific lubricants as recommended by Snorkel, should Tie rods (item 3.): Lubricate at recommended interval
be used in maintaining your unit. If in doubt regarding the using lubricant as outlined in the maintenance schedule.
use of lubricants other than those listed, contact Snorkel
Customer Service Department, St. Joseph Missouri, for Swing drive
evaluation and recommendation.
Swing drive (item 4.): To check oil level, remove check
Refer to the above lubrication illustration for location of plug located on the side of the gear box. Unit is full if oil is
item numbers. level with bottom of fill hole or just starts to run out.

Pressure gun application Gear hubs

Service all fittings as indicated in the Maintenance Gear hubs (item 5.): To check and fill Gear hubs:
Schedule and lubrication illustration. Wipe away all ex- 1. Rotate wheel until bottom of filler/drain plug is
cess lubricant from exposed surfaces. Over lubrication about 1 inch above horizontal centerline.
can collect dirt and foreign matter which acts as an abra-
sive. Lubrication of accessory equipment should be in 2. Remove plug with drive ratchet and extension.
accordance with the manufacturer’s recommendations. 3. Fill until lubricant is level with bottom of fill hole.

Rotation bearing Note:

Do not overfill gear hubs as they are not vented and
Rotation bearing (item 1.): Pressure gun lubricate bear- need air space for expansion of oil to prevent damage
ing at recommended interval using lubricant as outlined to hubs.
in the maintenance schedule. Rotate while lubricating.
Lubrication fitting is located on the font plate of the turn- Hydraulic oil reservoir
table.
Hydraulic oil reservoir (item 6.): The fluid level should be
Rotation gear teeth and pinion kept between the low and full marks on the sight gauge
indicator and should be checked with all cylinders fully
Rotation gear teeth and pinion (item 2.): Gear teeth and retracted and the platform in stowed position.
gear box pinion should be lubricated with a spray-on
type open gear lubricant. The interior of the reservoir should be wiped out and
cleaned each time the hydraulic oil is changed.

4 UNO41 – revised December 2001

 Service information
The reservoir filler/breather cap should be removed and The filter condition indicator is accurate only when the
the cap strainer cleaned with Kerosene, Fuel Oil, or engine is running at maximum RPM and pump is dis-
other solvent at this time. charging maximum flow, which occurs only during full
speed driving. This requires that the indicator be ob-
It is absolutely necessary that only new, clean hydraulic
served while the unit is in motion, booms fully retracted
oil is added.
and in stowed position, drive range switch in “LO” posi-
Note: tion, and drive controller fully forward. Oil temperature
If it becomes necessary to add or use an oil other should be at least 90 degrees.
than the recommended fluid, it is important that it be Note:
compatible and equivalent to the factory fill. Local oil
suppliers can generally furnish this information. Use extreme caution while observing the condition
indicator because of the motion of the drive wheels.
If questions still remain, contact Snorkel Customer Ser- The condition indicator is best observed from outside
vice Department, St. Joseph, Missouri, for further infor- of the tract of the vehicle wheels to avoid possible
mation. personal injury or machine damage.
When changing the filter element, the oil inside of the fil-
Engines
ter element, should be examined for deposits of metal
Engine (item 7.): Refer to the engine manufacturer’s in- cuttings, which is present, could indicate excessive
struction manual or consult your local engine service wear in some of the system components.
representative if engine adjustments or repairs are
needed. The engine MUST be operated in accordance Suction strainer
with manufacturer’s instructions and serviced at recom-
Suction strainer (item 11.): A 100 mesh strainer is lo-
mended intervals.
cated within the hydraulic oil reservoir and filters the
pump suction flow.
Door hinges and latches
The strainer is cleanable and should be cleaned at the
Door hinges and latches (item 8.): After lubricating, re-
time interval shown in the maintenance schedule chart,
move any excess oil or over spray so it will not collect dirt
using Kerosene, Fuel oil or other solvent and a soft bris-
or debris.
tled brush.
Platform rotation gear box Inspect filter for damage to wire cloth. Holes in the filter
cloth leak dirt into the pump and other vital hydraulic
Platform rotation gear box (item 9.): To check fluid level
components. If element is damaged, replace.
and fill with rotation gear box rotary gear reducer.
1. Remove lubrication level check plug on rear of When filter has been thoroughly cleaned, reinstall filter
worm drive housing. on suction line and tighten securely.

2. Check that lubricant is level with bottom of check Pump drive shaft
plug.
Pump drive shaft (item 12. - Kubota units only): The uni-
3. If low on oil, remove fill plug on top side and add lu-
versal joint bearings (2 fittings) and pump spline yoke
bricant as required to bring oil level up to bottom of
lubrication level check plug. should be lubricated at recommended interval using lu-
bricant as outlined in the maintenance schedule.
Hydraulic oil return filter The pump spline yoke should also be re-lubricated after
Return filter (item 10.): On UNO41 models, the hydrau- any high pressure washing or steam cleaning operation
lic oil return filter is located on the right side of the chas- if applied directly to the pump drive yoke.
sis near the front (steer) wheel.
The filter element is a spin on throw-away type filter and
should be changed after the initial break-in period (ap-
proximately 50 hours operation time).
The filter is equipped with a hydraulic pressure gauge to
indicate the filter element condition. A by-pass relief
within the filter base is provided and is set to by-pass at
25 PSI. If pressure readings are above 25 PSI, the filter
should be changed.
The filter condition should be checked at the 90 day or
150 hour Preventive Inspection Maintenance interval or
more frequently under extreme working conditions.

UNO41 – revised December 2001 5

 Service information
Batteries
Batteries (item 13.): Batteries will have longer life if the
water level is maintained and they are kept charged. The
unit will have better starting characteristics with a fully
charged battery.
n cold weather the battery should be maintained at full
charge to keep from freezing. An extremely low or dead
battery can freeze in cold weather. Make sure connec-
tions are clean and tight.
Make sure charging equipment is operating properly.

DANGER
Lead-acid batteries produce flammable and explo-
sive gases. Never allow smoking, flames or sparks
around batteries.
Lead-acid batteries contain sulfuric acid which will
damage eyes or skin on contact. When working
around batteries, always wear a face shield to avoid
acid in eyes.
If acid contacts eyes, flush immediately with clear water
and get medical attention.
Wear rubber gloves and protective clothing to keep acid
off skin, if acid contacts skin, wash off immediately with
clear water.

6 UNO41 – revised December 2001

 Preventive inspection maintenance
90 day or 150 hour checklist
OK OK - No Service Required
Serial Number
✔ Corrective Action Required
X Corrected, (Record description of corrective action).

Inspection Procedures Codes Check OK ✔ X

Booms
(1) Weld cracks, dents and/or rust
Structural (1)
(2) Installation
Bottom boom pin caps and tie wire (2,6)
(3) Leaks Hydraulic hoses and tubes (3,5)
(4) Operation Master level cylinder washers and bolts (2,6)
(5) Condition Master level cylinder and holding valves (3,4)
(6) Tightness Extension cylinder pin caps and tie wire (2,6)
(7) Residue buildup Extension cylinder and holding valve (3,4)
(8) See placards and decals inspection chart Hose carrier (7)
Plastic hose track (5)
Electrical wires (5)
Check OK ✔ X
Lift cylinder pin caps and tie wire (2,6)
Chassis Lift cylinder and holding valve (3,4)
Structural (1) Follower arm pin caps and tie wire (2,6)
Steering cylinder pin caps and tie wire (2,6) Decals and placards (2,8)
Steering linkage (4)
Tires (5) Platform
Hydraulic tubes and hoses (3,5) Structural (1)
Decals and placards (2,8) Decals and placards (2,8)
Torque drive wheel lug nuts per placard on wheel (6) Gravity gate (4)
Torque steer wheel lug nuts per placard on wheel (6) Hydraulic tubes and hoses (3,5)
Right rear drive motor/brake (3) Slave level cylinder washers and bolts (2,6)
Left rear drive motor/brake (3) Slave level cylinder holding valve (3,4)
Right front drive motor (3) Platform mounting bolts (2,6)
Left front drive motor (3)
Lubrication points
Platform rotator
Structural (1)
Turntable Platform manual rotator (4)
Structural (1) Pylon pin caps and tie wire (2,6)
Torque turntable top bolts @180 ft. lbs. (6) Manual rotator mounting bolts (2,6)
Torque turntable bottom bolts @180 ft. lbs. (6)
Hydraulic tubes and hoses (3,5)
Upper control station
Lift cylinder pin caps and tie wire (2,6)
Foot switch, unit will not start when engaged (4)
Lift cylinder and holding valves (3,4)
Foot switch, functions operate when engaged (4)
Emergency bleed down valve (4)
Engine START-STOP (4)
Cowling (5,6)
Electric throttle, fast - foot switch down (4)
Wire harness (2,5)
Engine choke, gasoline units (4)
Decals and placards (2,8)
Turntable rotation (4)
Master level cylinder washers and bolts (2,6)
Bottom boom UP - DOWN (4)
Master level cylinder and holding valves (3,4)
Middle boom UP - DOWN (4)
Rotation backlash (5)
Top boom UP - DOWN (4)
Correct operators manual in document holder
Boom extension IN-OUT (4)
System pressure
Platform leveling UP-DOWN (4)
Lubrication points
Drive range HIGH - MID - LOW, forward drive (4)
Drive range MID - LOW, reverse drive (4)
Lower control station Drive speed SLOW - boom raised (4)
Station selector switch - ground controls Emergency power, all functions (4)
platform controls DO NOT work (4)
Emergency shutdown control (4)
Station selector switch - platform controls
ground controls DO NOT work (4) Gradual start to stop, drive controller (4)
Ground control switches (4) Speed limit switch (4)
Turntable rotation (4) 5° tilt alarm (4)
Bottom boom UP - DOWN (4) 110 volt AC power to platform (2,4)
Middle boom UP - DOWN (4)
Top boom UP - DOWN (4) Hydraulic reservoir
Boom extension IN - OUT (4) Filler/breather cap and tank (6)
Platform leveling UP - DOWN (4) Hydraulic fluid level (5)
Emergency power, all functions (4) Hydraulic filter (3,4)

UNO41 – revised December 2001 7

 Preventive inspection maintenance

Check OK ✔ X Check OK ✔ X
Engine Optional equipment
Charging system (4) 110 volt on-board AC generator(2,4)
Air filter (5) Air line to platform (2,4)
Hour meter (4) Dual fuel system (3,4)
Belts and hoses (5) LP gas system (4)
Hydraulic pump (4) Horn (2,4)
Engine oil (2,5) Motion warning alarm (2,4)
Battery terminals (6,7) Operation warning light (2,4,6)
Battery electrolyte level (5) Keyed selector switch (4)
Indicator gauges (4,5) Optional platform (2,4,6)
Engine START-STOP (4) Platform work lights (2,4)
Electric throttle (4) Tool tray (5)
Electric choke, if equipped (4) Tow package (1,2)
Coolant level (5) Foam filled tires (4)
Engine idle (4)

Corrective Action Required

Note: If correction action is required on any item, attach sheet indicating problem and action taken.

All items have been properly checked and tested and found to be operating satisfactory or necessary corrective action has been completed.

Inspected By: Date

8 UNO41 – revised December 2001

 Capscrew torque chart

GRADE SAE GRADE SAE GRADE SAE GRADE SAE GRADE

BOLT 1 OR 2 5 6 8
MARKING
INDETERMINATE MINIMUM MEDIUM
DEFINITION QUALITY COMMERCIAL COMMERCIAL
QUALITY QUALITY
LOW MEDIUM MEDIUM MED. CARBON
MATERIAL CARBON CARBON CARBON ALLOY
STEEL STEEL STEEL STEEL
TEMPERED Q&T Q&T
MIN. TENSILE 64,000 P.S.I. 105,000 P.S.I. 133,000 P.S.I. 150,000 P.S.I.
STRENGTH
BOLT SIZE RECOMMENDED TORQUE VALUES (FT - LBS)
1/4 5 7 10 10.5
5/16 9 14 19 22
3/8 15 25 34 37
7/16 24 40 55 60
1/2 37 60 85 92
9/16 53 88 120 132
5/8 74 120 167 180
3/4 120 200 280 296
7/8 190 302 440 473
1 282 466 660 714

The following rules apply to the chart

1. Consult manufacturers' specific recommendations when available.
2. The chart may be used with both course and fine thread fasteners lightly lubricated.
3. Increase torque by 20% when multiple tapered tooth (shake proof) lock washers are used.
4. The torque values are given in foot-pounds.
5. Inch pound equivalent may be obtained by multiplying by 12.

UNO41 – revised December 2001 9

 AWA150038

Hydraulic schematic

Snorkel model UNO41 Page 11

 AW0152704

Wiring schematic
Ford VSG-413
Page 12 Snorkel model UNO41
 AW0152705

Wiring schematic
Kubota diesel
Snorkel model UNO 41DG 4x4 Page 13