Scribd
Upload
45 views

Nucleus and Pro-Tools Tutorial

This tutorial provides instructions for enabling communication between Avid's ProTools 8 or 9 software and an SSL Nucleus console. It details steps for configuring the ipMIDI network connection and MIDI ports in ProTools to recognize the Nucleus as two HUI controllers to control ProTools from the console. The steps are similar for both Windows and Mac machines.

Uploaded by

luz.negociosenlinea
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
45 views

Nucleus and Pro-Tools Tutorial

This tutorial provides instructions for enabling communication between Avid's ProTools 8 or 9 software and an SSL Nucleus console. It details steps for configuring the ipMIDI network connection and MIDI ports in ProTools to recognize the Nucleus as two HUI controllers to control ProTools from the console. The steps are similar for both Windows and Mac machines.

Uploaded by

luz.negociosenlinea
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

www.solidstatelogic.

com

Nucleus and ProTools Tutorial


82BN0101A - V1.2

This tutorial details the steps required to enable communication between Avid’s ProTools 8 or 9 software
and your SSL Nucleus console.

This tutorial assumes that you have already installed the Nucleus software on your DAW and that there is
both a working network connection and direct USB connection to the console. If you have yet to configure
this part of your system please refer to the Nucleus Owner’s Manual before continuing.

Windows Machines
Windows XP, Vista and Windows 7 (32+64-bit)

1. Locate the ipMIDI Monitor application. By default this is in Start Menu>Programs>ipMIDI.

2. Ensure there are at least two active ipPorts and the ‘Loop Back’ box is unchecked, then
press ‘OK’ to continue.

3. Launch ProTools and navigate to Setup>Peripherals>MIDI Controllers.

Support. This is SSL.


www.solidstatelogic.com

4. Nucleus appears as 2 HUI controllers. Set controller #1 to HUI and assign its 'Receive From'
and 'Send To' ports to ipMIDI Port 1.

5. Set controller # 2 to HUI and assign its 'Receive From' and 'Send To' ports to ipMIDI Port 2.

6. Assign controllers #3 and #4 to ‘None’ as shown below.

7. Switch to the Nucleus Remote software and ensure the selected profile is ‘ProTools Default’.
Depending on the current setting this may require a reboot to place Nucleus into HUI mode.

8. Test for correct operation.

Support. This is SSL.


www.solidstatelogic.com

Apple Macintosh Machines


Mac OS 10.5.x/10.6.x

1. With all MIDI applications closed, navigate to MacHD>Applications>Utilities>Audio MIDI


Setup.

2. If the MIDI window is not open go to Window>Show MIDI Window.

3. Double click the ipMIDI icon.

4. Ensure there are at least two active ipPorts and the ‘Loop Back’ box is unchecked and press
‘Apply’.

5. Launch ProTools and navigate to Setup>Peripherals>MIDI Controllers.

6. Nucleus appears as 2 HUI controllers. Set controller #1 to HUI and assign its 'Receive From'
and 'Send To' ports to ipMIDI Port 1.

7. Set controller # 2 to HUI and assign its 'Receive From' and 'Send To' ports to ipMIDI Port 2.

Support. This is SSL.


www.solidstatelogic.com

8. Assign controllers #3 and #4 to ‘None’ as shown below.

9. Switch to the Nucleus Remote software and ensure the selected profile is ‘ProTools Default’.
Depending on the current setting this may require a reboot to place Nucleus into HUI mode.

10. Test for correct operation.

Support. This is SSL.

You might also like