Scribd
Upload
108 views1 page

Silres® BS 333

SILRES® BS 333 is a nonionic, solvent-free, water-dilutable emulsion of a reactive polysiloxane used as an additive for aqueous indoor paints and coatings. When added to paints, it improves workability by positively influencing wetting, leveling, and extending the open time of subsequent coats. It also improves antiblocking properties and increases the contact angle of the final coating. SILRES® BS 333 can be added undiluted to paints or coatings during or after their production, with 1-3 wt-% recommended. It is stored until the best use date shown on the label.

Uploaded by

Azhar Abdul Razak
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
108 views1 page

Silres® BS 333

SILRES® BS 333 is a nonionic, solvent-free, water-dilutable emulsion of a reactive polysiloxane used as an additive for aqueous indoor paints and coatings. When added to paints, it improves workability by positively influencing wetting, leveling, and extending the open time of subsequent coats. It also improves antiblocking properties and increases the contact angle of the final coating. SILRES® BS 333 can be added undiluted to paints or coatings during or after their production, with 1-3 wt-% recommended. It is stored until the best use date shown on the label.

Uploaded by

Azhar Abdul Razak
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

SILRES® BS 333

MASONRY WATER REPELLENTS

Product description aqueous indoor paints or coatings during or after their


production. The addition of 1-3 wt.-% is recommended.
SILRES® BS 333 is a nonionic, solvent-free, water- The product should be stirred well before use.
dilutable emulsion of a reactive polysiloxane.

Application Storage

SILRES® BS 333 is used in undiluted form as an The 'Best use before end' date of each batch is shown
additive for aqueous indoor paints or coatings in order on the product label.
to improve the workability.
Storage beyond the date specified on the label does
In indoor paints SILRES® BS 333 positively influences not necessarily mean that the product is no longer
the wetting and leveling properties which leads to a usable. In this case however, the properties required
very even and smooth coating. Especially on surfaces for the intended use must be checked for quality
with sidelight applications without visible overlap are assurance reasons.
possible. Because of hydrophobation of the first coat
the open time of the second coat is extended. Safety notes
Therefore the application is mendable well.
Furthermore the antiblocking properties of the paint Comprehensive instructions are given in the
are improved. The use of SILRES® BS 333 also corresponding Material Safety Data Sheets. They are
causes a considerable increase regarding the contact available on request from WACKER subsidiaries or
angle of the final coating. may be printed via WACKER web site
http://www.wacker.com.

Processing

SILRES® BS 333 can be added in undiluted form to

Product data

Typical general characteristics Inspection Method Value


Appearance milky, white
Solid content approx. 50 % by weight
pH-Value Indicator strips 8 - 9 at 25 °C

These figures are only intended as a guide and should not be used in preparing specifications.

The data presented in this leaflet are in accordance with the present state of The management system has been For technical, quality, or product
our knowledge, but do not absolve the user from carefully checking all certified according to DIN EN ISO safety questions, please contact:
9001 and DIN EN ISO 14001
supplies immediately on receipt. We reserve the right to alter product
constants within the scope of technical progress or new developments. The Wacker Chemie AG
WACKER is a trademark of Wacker
recommendations made in this leaflet should be checked by preliminary Hanns-Seidel-Platz 4
Chemie AG.
trials because of conditions during processing over which we have no 81737 München, Germany
SILRES® is a trademark of Wacker
control, especially where other companies' raw materials are also being [email protected]
Chemie AG.
used. The recommendations do not absolve the user from the obligation of
investigating the possibility of infringement of third parties' rights and, if www.wacker.com
necessary, clarifying the position. Recommendations for use do not
constitute a warranty, either express or implied, of the fitness or suitability of
the products for a particular purpose.

Technical data sheet for SILRES® BS 333 / Version: 1.0 / Date of last alteration: 02.05.2013 1/1

You might also like