Features Applications

T
AN
■ Radial Leaded Devices Almost anywhere there is a low voltage power

LI
LO & MP

EE
FR
CO ■ Cured, flame retardant epoxy polymer supply and a load to be protected, including:

N
S

GE
oH

insulating material meets UL 94V-0 ■ Computers & peripherals

*R

HA

requirements ■ General electronics

**

■ RoHS compliant* and halogen free** ■ Automotive applications

■ Agency recognition:

MF-R Series - PTC Resettable Fuses

Electrical Characteristics
1 Hour (R1) Tripped
Initial Max. Time
Ihold Itrip Post-Trip Power
Resistance to Trip
V max. I max. Resistance Dissipation
Model
Volts Amps Amperes Ohms Ohms Amperes Seconds Watts
at 23 °C at 23 °C at 23 °C at 23 °C at 23 °C at 23 °C
Hold Trip Min. Max. Max. Typ.
MF-R005** 60 40 0.05 0.10 7.3 11.1 22.0 0.5 5.0 0.22
MF-R010 60 40 0.10 0.20 2.50 4.50 7.50 0.5 4.0 0.38
MF-R017 60 40 0.17 0.34 2.00 3.20 8.00 0.85 3.0 0.48
MF-R020 60 40 0.20 0.40 1.50 2.84 4.40 1.0 2.2 0.40
MF-R025 60 40 0.25 0.50 1.00 1.95 3.00 1.25 2.5 0.45
MF-R030 60 40 0.30 0.60 0.76 1.36 2.10 1.5 3.0 0.50
MF-R040 60 40 0.40 0.80 0.52 0.86 1.29 2.0 3.8 0.55
MF-R050 60 40 0.50 1.00 0.41 0.77 1.17 2.5 4.0 0.75
MF-R065 60 40 0.65 1.30 0.27 0.48 0.72 3.25 5.3 0.90
MF-R075 60 40 0.75 1.50 0.18 0.40 0.60 3.75 6.3 0.90
MF-R090 60 40 0.90 1.80 0.14 0.31 0.47 4.5 7.2 1.00
MF-R090-0-9 30 40 0.90 1.80 0.07 0.12 0.22 4.5 5.9 0.60
MF-R110 30 40 1.10 2.20 0.10 0.18 0.27 5.5 6.6 0.70
MF-R135 30 40 1.35 2.70 0.065 0.115 0.17 6.75 7.3 0.80
MF-R160 30 40 1.60 3.20 0.055 0.105 0.15 8.0 8.0 0.90
MF-R185 30 40 1.85 3.70 0.040 0.07 0.11 9.25 8.7 1.00
MF-R250 30 40 2.50 5.00 0.025 0.048 0.07 12.5 10.3 1.20
MF-R250-0-10 30 40 2.50 5.00 0.025 0.048 0.07 12.5 10.3 1.20
MF-R300 30 40 3.00 6.00 0.020 0.05 0.08 15.0 10.8 2.00
MF-R400 30 40 4.00 8.00 0.010 0.03 0.05 20.0 12.7 2.50
MF-R500 30 40 5.00 10.00 0.010 0.03 0.05 25.0 14.5 3.00
MF-R600 30 40 6.00 12.00 0.005 0.02 0.04 30.0 16.0 3.50
MF-R700 30 40 7.00 14.00 0.005 0.02 0.03 35.0 17.5 3.80
MF-R800 30 40 8.00 16.00 0.005 0.02 0.03 40.0 18.8 4.00
MF-R900 30 40 9.00 18.00 0.005 0.01 0.02 45.0 ***20.0 4.20
MF-R1100 16 100 11.00 22.00 0.003 0.01 0.014 40.0 20.0 4.50

**CSA approval pending. ***Tested at 40 amps

Environmental Characteristics

Operating/Storage Temperature ...................... -40 °C to +85 °C

Maximum Device Surface Temperature
in Tripped State ............................................ 125 °C
Passive Aging .................................................. +85 °C, 1000 hours...........................................±5 % typical resistance change
Humidity Aging................................................. +85 °C, 85 % R.H. 1000 hours .........................±5 % typical resistance change
Thermal Shock ................................................ -40 °C to +85 °C, 10 times ................................±10 % typical resistance change
Solvent Resistance .......................................... MIL-STD-202, Method 215 ...............................No change
Vibration .......................................................... MIL-STD-883C, Method 2007.1,.......................No change
Condition A
Test Procedures And Requirements For Model MF-R Series
Test Test Conditions Accept/Reject Criteria
Visual/Mech. .................................................... Verify dimensions and materials .......................Per MF physical description
Resistance ....................................................... In still air @ 23 °C .............................................Rmin ≤ R ≤ Rmax
Time to Trip ...................................................... 5 times Ihold, Vmax, 23 °C ...............................T ≤ max. time to trip (seconds)
Hold Current .................................................... 30 min. at Ihold .................................................No trip
Trip Cycle Life .................................................. Vmax, Imax, 100 cycles ....................................No arcing or burning
Trip Endurance ................................................ Vmax, 48 hours.................................................No arcing or burning

UL File Number ............................................... E 174545

CSA File Number ............................................. CA 110338
TÜV File Number ............................................. R2057213

* RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011.
** Bourns follows the prevailing definition of “halogen free” in the industry. Bourns considers a product to be “halogen free” if (a) the Bromine (Br) content is 900 ppm or less;
(b) the Chlorine (Cl) content is 900 ppm or less; and (c) the total Bromine (Br) and Chlorine (Cl) content is 1500 ppm or less.
Specifications are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specific applications.
Additional Features
■ Bulk packaging, tape and reel and Ammo-Pak available on most models

MF-R Series - PTC Resettable Fuses

Product Dimensions (see next page for outline drawing)

A B C D E Physical Characteristics
Model
Max. Max. Nom. Tol. ± Min. Max. Style Lead Dia. Material
8.0 8.3 5.1 0.7 7.6 3.1 0.405
MF-R005 4 Sn/NiCu
(0.315) (0.327) (0.201) (0.028) (0.299) (0.122) (0.016)
7.4 12.7 5.1 0.7 7.6 3.1 0.51
MF-R010 1 Sn/NiCu
(0.291) (0.5) (0.201) (0.028) (0.299) (0.122) (0.020)
7.4 12.7 5.1 0.7 7.6 3.1 0.51
MF-R017 1 Sn/CuFe
(0.291) (0.5) (0.201) (0.028) (0.299) (0.122) (0.020)
7.4 12.7 5.1 0.7 7.6 3.1 0.51
MF-R020 1 Sn/CuFe
(0.291) (0.5) (0.201) (0.028) (0.299) (0.122) (0.020)
7.4 12.7 5.1 0.7 7.6 3.1 0.51
MF-R025 1 Sn/CuFe
(0.291) (0.5) (0.201) (0.028) (0.299) (0.122) (0.020)
7.4 13.4 5.1 0.7 7.6 3.1 0.51
MF-R030 1 Sn/CuFe
(0.291) (0.528) (0.201) (0.028) (0.299) (0.122) (0.020)
7.4 13.7 5.1 0.7 7.6 3.1 0.51
MF-R040 1 Sn/CuFe
(0.291) (0.539) (0.201) (0.028) (0.299) (0.122) (0.020)
7.9 13.7 5.1 0.7 7.6 3.1 0.51
MF-R050 1 Sn/Cu
(0.311) (0.539) (0.201) (0.028) (0.299) (0.122) (0.020)
9.7 15.2 5.1 0.7 7.6 3.1 0.51
MF-R065 1 Sn/Cu
(0.382) (0.598) (0.201) (0.028) (0.299) (0.122) (0.020)
10.4 16.0 5.1 0.7 7.6 3.1 0.51
MF-R075 1 Sn/Cu
(0.409) (0.630) (0.201) (0.028) (0.299) (0.122) (0.020)
11.7 16.7 5.1 0.7 7.6 3.1 0.51
MF-R090 1 Sn/Cu
(0.461) (0.657) (0.201) (0.028) (0.299) (0.122) (0.020)
7.4 12.2 5.1 0.7 7.6 3.0 0.51
MF-R090-0-9 3 Sn/CuFe
(0.291) (0.480) (0.201) (0.028) (0.299) (0.118) (0.020)
8.9 14.0 5.1 0.7 7.6 3.0 0.51
MF-R110 1 Sn/Cu
(0.350) (0.551) (0.201) (0.028) (0.299) (0.118) (0.020)
8.9 18.9 5.1 0.7 7.6 3.0 0.51
MF-R135 1 Sn/Cu
(0.350) (0.744) (0.201) (0.028) (0.299) (0.118) (0.020)
10.2 16.8 5.1 0.7 7.6 3.0 0.51
MF-R160 1 Sn/Cu
(0.402) (0.661) (0.201) (0.028) (0.299) (0.118) (0.020)
12.0 18.4 5.1 0.7 7.6 3.0 0.51
MF-R185 1 Sn/Cu
(0.472) (0.724) (0.201) (0.028) (0.299) (0.118) (0.020)
12.0 18.3 5.1 0.7 7.6 3.0 0.81
MF-R250 2 Sn/Cu
(0.472) (0.720) (0.201) (0.028) (0.299) (0.118) (0.032)
12.0 18.3 5.1 0.7 7.6 3.0 0.51
MF-R250-0-10 3 Sn/CuFe
(0.472) (0.720) (0.201) (0.028) (0.299) (0.118) (0.020)
12.0 18.3 5.1 0.7 7.6 3.0 0.81
MF-R300 2 Sn/Cu
(0.472) (0.720) (0.201) (0.028) (0.299) (0.118) (0.032)
14.4 24.8 5.1 0.7 7.6 3.0 0.81
MF-R400 2 Sn/Cu
(0.567) (0.976) (0.201) (0.028) (0.299) (0.118) (0.032)
17.4 24.9 10.2 0.7 7.6 3.0 0.81
MF-R500 2 Sn/Cu
(0.685) (0.980) (0.402) (0.028) (0.299) (0.118) (0.032)
19.3 31.9 10.2 0.7 7.6 3.0 0.81
MF-R600 2 Sn/Cu
(0.760) (1.256) (0.402) (0.028) (0.299) (0.118) (0.032)
22.1 29.8 10.2 0.7 7.6 3.0 0.81
MF-R700 2 Sn/Cu
(0.870) (1.173) (0.402) (0.028) (0.299) (0.118) (0.032)
24.2 32.9 10.2 0.7 7.6 3.0 0.81
MF-R800 2 Sn/Cu
(0.953) (1.295) (0.402) (0.028) (0.299) (0.118) (0.032)
24.2 32.9 10.2 0.7 7.6 3.0 0.81
MF-R900 2 Sn/Cu
(0.953) (1.295) (0.402) (0.028) (0.299) (0.118) (0.032)
24.2 32.9 10.2 0.7 7.6 3.0 0.81
MF-R1100 2 Sn/Cu
(0.953) (1.295) (0.402) (0.028) (0.299) (0.118) (0.032)
Packaging options: 0.405 (26AWG) MM
0.51 (24AWG) DIMENSIONS:
BULK: All models = 500 pcs. per bag 0.81 (20AWG) (INCHES)
TAPE & REEL: MF-R005-MF-R160 12.7 mm device pitch = 3000 pcs. per reel
MF-R185-MF-R400 25.4 mm device pitch = 1500 pcs. per reel
MF-R500~MF-R1100 25.4 mm device pitch = 1000 pcs. per reel
AMMO-PACK: MF-R005-MF-R160 12.7 mm device pitch = 2000 pcs. per pack
MF-R185-MF-R400 25.4 mm device pitch = 1000 pcs. per pack
MF-R500~MF-R1100 25.4 mm device pitch = 500 pcs. per pack

Specifications are subject to change without notice.

The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specific applications.
 MF-R Series - PTC Resettable Fuses

Product Dimensions (see previous page for dimensions)

Style 1 Style 2 Style 3 Style 4

A E A E A E A E

B
B B B

C
D

D D

C C C

NOTE: Kinked lead option is NOTE: Also available with

available for board standoff. straight leads. Contact
Contact factory for details. factory for details.

Thermal Derating Chart - Ihold / Itrip (Amps)

Ambient Operating Temperature

Model
-40 ºC -20 ºC 0 ºC 23 ºC 40 ºC 50 ºC 60 ºC 70 ºC 85 ºC
MF-R005 0.08 / 0.16 0.07 / 0.14 0.06 / 0.12 0.05 / 0.10 0.04 / 0.08 0.04 / 0.08 0.03 / 0.07 0.03 / 0.07 0.02 / 0.05
MF-R010 0.16 / 0.32 0.14 / 0.28 0.12 / 0.24 0.10 / 0.20 0.08 / 0.16 0.07 / 0.14 0.06 / 0.12 0.05 / 0.10 0.04 / 0.08
MF-R017 0.26 / 0.52 0.23 / 0.46 0.20 / 0.40 0.17 / 0.34 0.14 / 0.28 0.12 / 0.24 0.11 / 0.22 0.09 / 0.18 0.07 / 0.14
MF-R020 0.31 / 0.62 0.27 / 0.54 0.24 / 0.48 0.20 / 0.40 0.16 / 0.32 0.14 / 0.28 0.13 / 0.26 0.11 / 0.22 0.08 / 0.16
MF-R025 0.39 / 0.78 0.34 / 0.68 0.30 / 0.60 0.25 / 0.50 0.20 / 0.40 0.18 / 0.36 0.16 / 0.32 0.14 / 0.28 0.10 / 0.20
MF-R030 0.47 / 0.94 0.41 / 0.82 0.36 / 0.72 0.30 / 0.60 0.24 / 0.48 0.22 / 0.44 0.19 / 0.38 0.16 / 0.32 0.12 / 0.24
MF-R040 0.62 / 1.24 0.54 / 1.08 0.48 / 0.96 0.40 / 0.80 0.32 / 0.64 0.29 / 0.58 0.25 / 0.50 0.22 / 0.44 0.16 / 0.32
MF-R050 0.78 / 1.56 0.68 / 1.36 0.60 / 1.20 0.50 / 1.00 0.41 / 0.82 0.36 / 0.72 0.32 / 0.64 0.27 / 0.54 0.20 / 0.40
MF-R065 1.01 / 2.02 0.88 / 1.76 0.77 / 1.54 0.65 / 1.30 0.53 / 1.06 0.47 / 0.94 0.41 / 0.82 0.35 / 0.70 0.26 / 0.52
MF-R075 1.16 / 2.32 1.02 / 2.04 0.89 / 1.78 0.75 / 1.50 0.61 / 1.22 0.54 / 1.08 0.47 / 0.94 0.41 / 0.82 0.30 / 0.60
MF-R090 1.40 / 2.80 1.22 / 2.44 1.07 / 2.14 0.90 / 1.80 0.73 / 1.46 0.65 / 1.30 0.57 / 1.14 0.49 / 0.98 0.36 / 0.72
MF-R090-0-9 1.40 / 2.80 1.22 / 2.44 1.07 / 2.14 0.90 / 1.80 0.73 / 1.46 0.65 / 1.30 0.57 / 1.14 0.49 / 0.98 0.36 / 0.72
MF-R110 1.60 / 3.20 1.43 / 2.86 1.27 / 2.54 1.10 / 2.20 0.91 / 1.82 0.85 / 1.70 0.75 / 1.50 0.67 / 1.34 0.57 / 1.14
MF-R135 1.96 / 3.92 1.76 / 3.52 1.55 / 3.10 1.35 / 2.70 1.12 / 2.24 1.04 / 2.08 0.92 / 1.84 0.82 / 1.64 0.70 / 1.40
MF-R160 2.32 / 4.64 2.08 / 4.16 1.84 / 3.68 1.60 / 3.20 1.33 / 2.66 1.23 / 2.46 1.09 / 2.18 0.98 / 1.96 0.83 / 1.66
MF-R185 2.68 / 5.36 2.41 / 4.82 2.13 / 4.26 1.85 / 3.70 1.54 / 3.08 1.42 / 2.84 1.26 / 2.52 1.13 / 2.26 0.96 / 1.92
MF-R250 3.63 / 7.26 3.25 / 6.50 2.88 / 5.76 2.50 / 5.00 2.08 / 4.16 1.93 / 3.86 1.70 / 3.40 1.53 / 3.06 1.30 / 2.60
MF-R250-0-10 3.63 / 7.26 3.25 / 6.50 2.88 / 5.76 2.50 / 5.00 2.08 / 4.16 1.93 / 3.86 1.70 / 3.40 1.53 / 3.06 1.30 / 2.60
MF-R300 4.35 / 8.70 3.90 / 7.80 3.45 / 6.90 3.00 / 6.00 2.49 / 4.98 2.31 / 4.62 2.04 / 4.08 1.83 / 3.66 1.56 / 3.12
MF-R400 5.80 / 11.6 5.20 / 10.4 4.60 / 9.20 4.00 / 8.00 3.32 / 6.64 3.08 / 6.16 2.72 / 5.44 2.44 / 4.88 2.08 / 4.16
MF-R500 7.25 / 14.5 6.50 / 13.0 5.75 / 11.5 5.00 / 10.0 4.15 / 8.30 3.85 / 7.70 3.40 / 6.80 3.05 / 6.10 2.60 / 5.20
MF-R600 8.70 / 17.4 7.80 / 15.6 6.90 / 13.8 6.00 / 12.0 4.98 / 9.96 4.62 / 9.24 4.08 / 8.16 3.66 / 7.32 3.12 / 6.24
MF-R700 10.1 / 20.3 9.10 / 18.2 8.05 / 16.1 7.00 / 14.0 5.81 / 11.6 5.39 / 10.7 4.76 / 9.52 4.27 / 9.44 3.64 / 7.28
MF-R800 11.6 / 23.2 10.4 / 20.8 9.20 / 18.4 8.00 / 16.0 6.64 / 13.2 6.16 / 12.3 5.44 / 10.8 4.88 / 9.76 4.16 / 8.32
MF-R900 13.0 / 26.1 11.7 / 23.4 10.3 / 20.7 9.00 / 18.0 7.47 / 14.9 6.93 / 12.7 6.12 / 12.2 5.49 / 10.9 4.68 / 9.36
MF-R1100 16.1 / 32.0 14.6 / 29.2 13.1 / 26.2 11.0 / 22.1 9.40 / 18.4 8.80 / 17.6 7.80 / 15.6 6.90 / 13.8 5.20 / 10.4

Specifications are subject to change without notice.

The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specific applications.
 MF-R Series - PTC Resettable Fuses

Typical Time to Trip at 23 ºC How to Order

MF - R 110 - 0 - 99
MF 005

90
10

MF 1 7
MF 020
MF 025
MF 030
MF 040
MF 050
MF 065
MF 075
®

-R0
Multifuse
-R0

-R0
-R

-R
-R
-R
-R
-R
-R
-R
Product Designator
MF

MF

Series
R = Radial Leaded Component
Hold Current, Ihold
005-1100 (0.05 Amps - 11.0 Amps)
Packaging Options
- __ = Bulk Packaging without part
number suffix option
- 0-99 = Bulk Packaging with part
100 number suffix option
-2= Tape and Reel without part
Time to trip (Seconds)

number suffix option*

- 2-99 = Tape and Reel with part number
10 suffix option
- AP = Ammo-Pak*
- 0-14 = Kinked leads where straight
leads are standard
1 - 0-17 = Straight leads where kinked
leads are standard
Part Number Suffix Option
- 99 = As of date code April 1, 2005 all
0.1 MF-R models are RoHS
compliant. The suffix “-99”
can be used if a new part
number is required to reference
0.01 the RoHS compliance.
Examples:
MF-R110 ..................Bulk packaging
0.001 MF-R110-0-99 .........Bulk packaging
with part number
0.1 1 10 100 suffix option
MF-R110-2...............Tape and reel
Fault Current (Amps) packaging
MF-R110-2-99 .........Tape and reel
packaging with
part number
100
250 50,

MF 600
MF 00
9 0

MF 110
MF 135
MF 160
MF 185

MF -10
MF 00
MF 400
MF 500

MF 800
MF 900

suffix option
-0--R09

-R7
-R2

-R3

-R1
-0

-R

MF-R090-0-9-99 ......Bulk packaging

-R
-R
-R
-R

-R
-R

-R
-R
MF

MF

with part number

suffix option
MF-R250-0-10-99 ....Bulk packaging
with part number
suffix option

*Packaged per EIA486-B

Typical Part Marking: MF-R005 - R025

100
Represents total content. Layout may vary.
Time to trip (Seconds)

PART DATE CODE:

10 IDENTIFICATION
025 WEEK 1 OF 2000 = 0A
(YEAR & WEEK)
MANUFACTURER'S 0A WEEK 27 OF 2000 = A0
TRADEMARK (WEEK & YEAR)
1

Typical Part Marking: MF-R030 - R1100

0.1 Represents total content. Layout may vary.
MANUFACTURER'S
TRADEMARK
0.01 PART
IDENTIFICATION
R250 LOT NO.
DATE CODE 0180T (T = TAIWAN
0.001 (FIRST DIGIT = S = CHINA)
LAST DIGIT OF YEAR;
1 10 100 NEXT THREE DIGITS =
DAY OF YEAR)
Fault Current (Amps) MF-R SERIES, REV. AC, 11/14
Specifications are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specific applications.
 MF-R, MF-R/90, MF-R/600, MF-RX, & MF-RX/72 Series
Tape and Reel Specifications

Devices taped using EIA468–B/IEC286-2 standards. See table below and Figures 1 and 2 for details.

IEC EIA Dimensions

Dimension Description Mark Mark Dimensions Tolerance
18 -0.5/+1.0
Carrier tape width W W
(.709) (-0.02/+.039)
11
Hold down tape width W0 W4 min.
(.433)
Hold down tape No protrusion
3
Top distance between tape edges W2 W6 max.
(.118)
9 -0.5/+0.75
Sprocket hole position W1 W5
(.354) (-0.02/+0.03)
4 ±0.2
Sprocket hole diameter D0 D0
(.157) (±.0078)
18.5 ±3.0
Abscissa to plane (straight lead) H H
(.728) (±.118)
16 ±0.5
Abscissa to plane (kinked lead) H0 H0
(.63) (±.02)
38.0
Abscissa to top (straight lead) H1 H1 max.
(1.496)
32.2
Abscissa to top (kinked lead) H1 H1 max.
(1.268)
55.0
Overall width w/lead protrusion (straight lead) C1 max.
(2.165)
43.2
Overall width w/lead protrusion (kinked lead) C1 max.
(1.7)
54.0
Overall width w/o lead protrusion (straight lead) C2 max.
(2.126)
42.5
Overall width w/o lead protrusion (kinked lead) C2 max.
(1.673)
1.0
Lead protrusion I1 L1 max.
(.039)
11
Protrusion of cutout L L max.
(.433)
Protrusion beyond hold-down tape I2 I2 Not specified
12.7 ±0.3
Sprocket hole pitch P0 P0
(0.5) (±.012)
±1
Pitch tolerance 20 consecutive
(±.039)
Device pitch: MF-R005–MF-R160, MF-R/90, 12.7 ±0.3
MF-RX110/72–MF-RX185/72 (0.5) (±.012)

Device pitch: MF-R185–MF-R400, MF-RX110–MF-RX375 25.4 ±0.6

MF-R/600, MF-RX250/72–MF-RX375/72 (1.0) (±.024)
0.9
Tape thickness t t max.
(.035)
Tape thickness with splice: MF-R010–MF-R160, t1 1.5 max.
MF-RX110/72–MF-RX185/72 (.059)

Tape thickness with splice: MF-R250–MF-R1100, t1 2.3 max.

MF-RX110–MF-RX375, MF-R/90, MF-RX250/72-MF-RX375/72 (.091)
±0.3
Splice sprocket hole alignment 0
(±.012)
±1.0
Body lateral deviation Δh Δh 0
(±.039)
±1.3
Body tape plane deviation Δp Δp 0
(±.051)
MM
DIMENSIONS:
(INCHES)
Specifications are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specific applications.
 MF-R, MF-R/90, MF-R/600, MF-RX, & MF-RX/72 Series
Tape and Reel Specifications

IEC EIA Dimensions

Dimension Description Mark Mark Dimensions Tolerance
5.08 ±0.2
Lead spacing: MF-R, MF-R/90, MF-R/600, MF-RX, MF-RX/72 F F
(0.2) (±0.008)
56.0
Reel width w W2 max.
(2.205)
370.0
Reel diameter d a max.
(14.57)
4.75 ±3.25
Space between flanges less device W1 h
(.187) (±.128)
26.0 ±12.0
Arbor hole diameter f c
(1.024) (±.472)
80
Core diameter: MF-R, MF-RX, MF-R/90 h n max.
(3.15)
91
Core diameter: MF-R/600 h n max.
(3.58)
62 355 345
Box: MF-R, MF-RX, MF-R/90 nom.
(2.44) (14.0) (13.6)
64 372 362
Box: MF-R/600 max.
(2.52) (14.6) (14.25)
Consecutive missing places: MF-R, MF-RX, MF-R/90 3 max.

Consecutive missing places: MF-R/600 none

Empty places per reel: MF-R, MF-RX, MF-R/90 Not specified

Empty places per reel: MF-R/600 0.1 %

Taped Component Dimensions -

Figure 1
h h p p

Reference plane
P1
H1 H1
F
H
A H0
L B W1
W0
W

I2 I1 P0 D0 User direction of feed

Cross section A - B

Reel Dimensions - Figure 2

t

Reel

h Upper side
Tape
User
d direction
of
feed
Lower side
f

MM
h DIMENSIONS:
(INCHES)
w

Specifications are subject to change without notice.

The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specific applications.