JAYAVARDHAN GOUD K
Hyderabad | +91-8499971161| [email protected] | LinkedIn Profile
https://www.linkedin.com/in/jayavardhangoud/
CAREER OBJECTIVE
An aspiring Electronics & Communication Engineering, currently looking for an opportunity to kickstart my
career in Embedded Domain. Like to be a part of a team where there will be a scope of new learning every day
with mutual growth in a reputed organization.
EDUCATION
Post Graduate certification in Embedded Systems for EV Applications, Skill Lync, Hyderabad
(2023-
Present) B.Tech, Electronics & Communication Engineering, Vardhaman College OF Engineering -
JNTUH University | 7.02 CGPA (2018-
2021) Visvesvaraya College of Engineering & Technology Diploma, Electronics and Communications
Engineering · (2015 - 2018) | 73.93%
10th, Shanthinikethan Model High School | 8.2 CGPA (2015)
TECHNICAL SKILLS
● Programming Languages: C, C++.
● Hardware Target: ATmega328P, STM32F.
● Protocol Exposure: UART, SPI, I2C, CAN.
● Software Tools: MATLAB, Simulink, Arduino IDE, Simule IDE, TinkerCAD, STM32Cube IDE.
PROJECTS
1. Implement the Code for controlling the retraction and extension of Airplane’s landing gear.
• In this project is controlling the retraction and extension of Airplane’s landing gear using finite state
machine. here present number of states on the machine.
• The FSM is an advanced programming algorithm used in implementing supervisory logics
• The state diagram is elaborating the switch states.
2. Controlling a DC motor using PWM and monitoring its Running status
• Implement a system on the simulator for controlling a DC motor using L293 motor driver, monitor its status and
print the running status of motor on the LCD Display.
• simulation of motor is one push button click motor run in clock wise direction
• 2nd step is use two push buttons first push button long press on push button1 and next click on second push
button and motor is increase in speed.
• 3rd step is click on third push button and motor is anti clock wise direction will run
• the output is shown in LCD display
3.measuring distance of an object using ultrasonic sensor (HC-SR04)
• In this project, the implementation of code for “Measuring distance of an object using ultrasonic distance sensor
(HC-SR04)
• Measuring the distance travelled by the wave to the object and gets bounced back from the object to sensor.
• Measuring Pulse width using Input Capture Mode.
• The distance travelled by a wave to the object for which we want to measure the distance using Ultrasonic
Distance Sensor (HC-SR04).
• Measuring Pulse width using Input Capture Mode of Timer 1.
4.Interfacing a 16*2 LCD with Arduino using I2C protocol
• In this project implementing the Code for “Interfacing a 16*2 LCD with two Arduino’s (one for Master and one
for Slave) using Inter-Integrated Circuit (I2C) communication protocol” by sending the message to LCD using
I2C communication protocol and display the message on LCD screen.
CERTIFICATIONS
• Embedded C Essential - Skill Lync Institution (2023)
• AVR Bare Metal Programming - Skill Lync Institution (2023)
• Software Verification And Validation And System Testing For Hand Code - Skill Lync Institution (2023)
• Fundamentals of Embedded Systems – skill Lync institution (2023).
• Hands-on offline workshop with Raspberry Pi IN SKILL LYNC IN (2023).
LANGUAGES
● Telugu-Native
● English-Proficient
● Hindi-Conversational
