Process Synchronization (Concurrent Process)
Process Synchronization (Concurrent Process)
Background
The Critical-Section Problem
Peterson’s Solution
Synchronization Hardware
Mutex Locks
Semaphores
Classic Problems of Synchronization
Monitors
Synchronization Examples
Alternative Approaches
Background
Processes can execute concurrently
May be interrupted at any time, partially completing
execution
Concurrent access to shared data may result in data
inconsistency
Maintaining data consistency requires mechanisms to ensure
the orderly execution of cooperating processes
while (true) {
/* produce an item in next produced */
while (true) {
while (counter == 0)
; /* do nothing */
next_consumed = buffer[out];
out = (out + 1) % BUFFER_SIZE;
counter--;
/* consume the item in next consumed */
}
Race Condition
counter++ could be implemented as
register1 = counter
register1 = register1 + 1
counter = register1
counter-- could be implemented as
register2 = counter
register2 = register2 - 1
counter = register2
critical section
turn = j;
remainder section
} while (true);
Solution to Critical-Section Problem
1. Mutual Exclusion - If process Pi is executing in its critical
section, then no other processes can be executing in their
critical sections
2. Progress - If no process is executing in its critical section and
there exist some processes that wish to enter their critical
section, then the selection of the processes that will enter the
critical section next cannot be postponed indefinitely
3. Bounded Waiting - A bound must exist on the number of
times that other processes are allowed to enter their critical
sections after a process has made a request to enter its critical
section and before that request is granted
Assume that each process executes at a nonzero speed
No assumption concerning relative speed of the n
processes
Critical-Section Handling in OS
Two approaches depending on if kernel is preemptive or non-
preemptive
Preemptive – allows preemption of process when running
in kernel mode
Non-preemptive – runs until exits kernel mode, blocks, or
voluntarily yields CPU
Essentially free of race conditions in kernel mode
Peterson’s Solution
Good algorithmic description of solving the problem
Two process solution
Assume that the load and store machine-language
instructions are atomic; that is, cannot be interrupted
The two processes share two variables:
int turn;
Boolean flag[2]
do {
acquire lock
critical section
release lock
remainder section
} while (TRUE);
test_and_set Instruction
Definition:
boolean test_and_set (boolean *target)
{
boolean rv = *target;
*target = TRUE;
return rv:
}
1. Executed atomically
2. Returns the original value of passed parameter
3. Set the new value of passed parameter to “TRUE”.
Solution using test_and_set()
if (*value == expected)
*value = new_value;
return temp;
}
1. Executed atomically
2. Returns the original value of passed parameter “value”
3. Set the variable “value” the value of the passed parameter “new_value”
but only if “value” ==“expected”. That is, the swap takes place only under
this condition.
Solution using compare_and_swap
Shared integer “lock” initialized to 0;
Solution:
do {
while (compare_and_swap(&lock, 0, 1) != 0)
; /* do nothing */
/* critical section */
lock = 0;
/* remainder section */
} while (true);
Bounded-waiting Mutual Exclusion with test_and_set
do {
waiting[i] = true;
key = true;
while (waiting[i] && key)
key = test_and_set(&lock);
waiting[i] = false;
/* critical section */
j = (i + 1) % n;
while ((j != i) && !waiting[j])
j = (j + 1) % n;
if (j == i)
lock = false;
else
waiting[j] = false;
/* remainder section */
} while (true);
Mutex Locks
Previous solutions are complicated and generally inaccessible
to application programmers
OS designers build software tools to solve critical section
problem
Simplest is mutex lock
Protect a critical section by first acquire() a lock then
release() the lock
Boolean variable indicating if lock is available or not
Calls to acquire() and release() must be atomic
Usually implemented via hardware atomic instructions
But this solution requires busy waiting
This lock therefore called a spinlock
acquire() and release()
acquire() {
while (!available)
; /* busy wait */
available = false;;
}
release() {
available = true;
}
do {
acquire lock
critical section
release lock
remainder section
} while (true);
Semaphore
Synchronization tool that provides more sophisticated ways (than Mutex locks)
for process to synchronize their activities.
Semaphore S – integer variable
Can only be accessed via two indivisible (atomic) operations
wait() and signal()
Originally called P() and V()
wait(semaphore *S) {
S->value--;
if (S->value < 0) {
add this process to S->list;
block();
}
}
signal(semaphore *S) {
S->value++;
if (S->value <= 0) {
remove a process P from S->list;
wakeup(P);
}
}
Deadlock and Starvation
Deadlock – two or more processes are waiting indefinitely for an
event that can be caused by only one of the waiting processes
Let S and Q be two semaphores initialized to 1
P0 P1
wait(S); wait(Q);
wait(Q); wait(S);
... ...
signal(S); signal(Q);
signal(Q); signal(S);
do {
...
/* produce an item in next_produced */
...
wait(empty);
wait(mutex);
...
/* add next produced to the buffer */
...
signal(mutex);
signal(full);
} while (true);
Bounded Buffer Problem (Cont.)
The structure of the consumer process
Do {
wait(full);
wait(mutex);
...
/* remove an item from buffer to next_consumed */
...
signal(mutex);
signal(empty);
...
/* consume the item in next consumed */
...
} while (true);
Readers-Writers Problem
A data set is shared among a number of concurrent processes
Readers – only read the data set; they do not perform any updates
Writers – can both read and write
Problem – allow multiple readers to read at the same time
Only one single writer can access the shared data at the same time
Several variations of how readers and writers are considered – all
involve some form of priorities
Shared Data
Data set
Semaphore rw_mutex initialized to 1
Semaphore mutex initialized to 1
Integer read_count initialized to 0
Readers-Writers Problem (Cont.)
do {
wait(rw_mutex);
...
/* writing is performed */
...
signal(rw_mutex);
} while (true);
Readers-Writers Problem (Cont.)
The structure of a reader process
do {
wait(mutex);
read_count++;
if (read_count == 1)
wait(rw_mutex);
signal(mutex);
...
/* reading is performed */
...
wait(mutex);
read count--;
if (read_count == 0)
signal(rw_mutex);
signal(mutex);
} while (true);
Readers-Writers Problem Variations
// eat
signal (chopstick[i] );
signal (chopstick[ (i + 1) % 5] );
// think
} while (TRUE);
What is the problem with this algorithm?
Dining-Philosophers Problem Algorithm (Cont.)
Deadlock handling
Allow at most 4 philosophers to be sitting
simultaneously at the table.
Allow a philosopher to pick up the forks only if both
are available (picking must be done in a critical
section.
Use an asymmetric solution -- an odd-numbered
philosopher picks up first the left chopstick and then
the right chopstick. Even-numbered philosopher picks
up first the right chopstick and then the left chopstick.
Problems with Semaphores
monitor monitor-name
{
// shared variable declarations
procedure P1 (…) { …. }
initialization_code() {
for (int i = 0; i < 5; i++)
state[i] = THINKING;
}
}
Solution to Dining Philosophers (Cont.)
DiningPhilosophers.pickup(i);
EAT
DiningPhilosophers.putdown(i);
Variables
• wait(mutex);
•…
• body of F;
•…
• if (next_count > 0) signal(next)
• else
• signal(mutex);
x_count++;
if (next_count > 0)
signal(next);
else
signal(mutex);
wait(x_sem);
x_count--;
Monitor Implementation (Cont.)
if (x_count > 0) {
next_count++;
signal(x_sem);
wait(next);
next_count--;
}
Resuming Processes within a Monitor
R.acquire(t);
...
access the resurce;
...
R.release;
Solaris
Windows
Linux
Pthreads
Solaris Synchronization
Implements a variety of locks to support multitasking, multithreading
(including real-time threads), and multiprocessing
Uses adaptive mutexes for efficiency when protecting data from short
code segments
Starts as a standard semaphore spin-lock
If lock held, and by a thread running on another CPU, spins
If lock held by non-run-state thread, block and sleep waiting for signal of
lock being released
Uses condition variables
Uses readers-writers locks when longer sections of code need
access to data
Uses turnstiles to order the list of threads waiting to acquire either an
adaptive mutex or reader-writer lock
Turnstiles are per-lock-holding-thread, not per-object
Priority-inheritance per-turnstile gives the running thread the highest of
the priorities of the threads in its turnstile
Windows Synchronization
OpenMP
void update()
{
/* read/write memory */
}
OpenMP
OpenMP is a set of compiler directives and API that support
parallel progamming.