Science Coaching Classes,jintur

MH-CET CELL
Chemistry
Total Questions : 50 Total Marks : 50
Roll No.
04-Aug-2021
XII - A Div 08:00 AM To 10:00 AM
This is to certify that, the entry of Roll No. has been correctly written and verified.

Candidate’s Signature MH-CET Chemistry Invigilator’s Signature

Note :
i) All Questions are compulsory
ii) Darken ( ) the appropriate circle(#) of the most correct option/response with black ball point pen.

t u r
j in
Introduction to Polymer Chemistry
,
1) Terylene is a ___________.
e s
s s
A) benzene + methanal
A) polyamide B) polyester
C la B) methanal + urea
C) polyethylene D) polypropylene
i ng C) benzaldehyde + phenol
2) Cotton blended with terylene forms _________.
c h
oa
D) phenol + methanal
A) terycot B) synthetic cotton

e C 6) _____________ is a moulding powder.

nc
C) terywool D) synthetic wool
A) Melamine B) Novolac
ie
3) Polymer used in making packaging containers
c
is __________.
S C) Bakelite D) Dacron

7) Bakelite is a ____________ polymer.

A) nylon 6 B) nylon 6,6

A) linear B) addition
C) PET D) viscose rayon

4) Polycarbonates are __________. C) cross-linked D) branched

8) The polymer that can be used as a substitute

A) thermoplastic resins
for glass is ____________.
B) elastomers
A) PET B) bakelite C) acrilan D) Teflon
C) fibres 9) Which of the following represents structure of
melamine?
D) thermosetting resins

5) The compounds required for the formation of

novolac are __________.
 16) Which polymer is used for making hose pipes
for transport of gasoline?

A) Buna-S B) Neoprene

C) Polyisoprene D) Bakelite

10) Polymer X is used in making decorative table 17) Which is NOT an elastomer?
tops like formica and plastic dinner-ware.
Polymer X is ____________. A) Neoprene B) Polyisoprene

A) PET C) Buna-S D) Dacron

B) novolac 18) ___________ is a regenerated fibre.

C) polyacrylonitrile A) Viscose rayon B) Melamine

D) melamine-formaldehyde resin C) Nylon 6,6

t u r
D) Terylene

,j in
19) Which of the following is INCORRECT?
11) Buna-S is also known as ___________.
e s
A) butyl rubber
s s
A) Cellulose is a linear polymer of fructose

B) chloroprene C la units.

i ng B) Cellulose in the form of wood pulp is

transformed into viscose rayon.
C) nitrile rubber
c h
D) styrene butadiene rubber
o a C) On treating alkali cellulose with CS2 ,
cellulose xanthate is obtained.

e C
12) SBR is obtained by mixing butadiene and

nc
styrene in the ratio ____________. D) Viscose rayon is a semisynthetic fibre.

A) 3:2 B) 2:3
c ie
C) 1:3 D) 3:1
20) Which of the following statement is

S
13) The monomer of neoprene is _____________.
INCORRECT related to the molecular mass of
the polymer?

A) chloroprene B) isoprene A) Low molecular mass polymers are brittle

and have low mechanical strength.
C) butadiene D) styrene
B) High molecular mass polymers are weak
14) Neoprene, a synthetic rubber contains which of and unmanageable.
the following element besides C and H?
C) Most of the mechanical properties of
A) N B) S C) CI D) F polymers depend upon their molecular
mass.
15) The chemical used for vulcanization of
neoprene is ___________.
D) Molecular mass of polymer depends upon
degree of polymerization.
A) sodium B) magnesium oxide

C) oxygen D) hydrogen peroxide

Makode sir 9881175310 9322299182

 21) ____________ polymers are resistant to
A) manufacture of cosmetics
environmental degradation process and do not
degrade on their own but accumulate as solid
B) manufacture of tyres
waste materials.

A) Plant B) Animal C) manufacture of non-stick pans

C) D) Biodegradable D) manufacture of rain coats

Non-biodegradable 27) Identify the copolymer among the following.
22) Which of the following monomers are used in
making PHBV polymer? A) Teflon B) Acrylic glass

A) 3-Hydroxybutanoic acid and C) Polycarbonates D) Polythene

3-Hydroxypentanoic acid
28) The commercial name of
polymethyl(methacrylate) is ___________.
B) 2-Hydroxybutanoic acid and
2-Hydroxypentanoic acid
t u r
in
A) hermocol B) glyptal

C) 2-Hydroxypropanoic acid and

s,j
3-Hydroxybutanoic acid
se
C) acrylic glass D) tefIon

D) 3-Hydroxypropanoic acid and la s

29) The monomeric component of commercial
polymer thermocol is ____________.
2-Hydroxybutanoic acid
g C
23) Which of the following is a biodegradable
hi n A) vinyl chloride B) acrylamide

polymer?
ac C) styrene D) acrylonitrile

A) Cellulose
C
B) Polyethene o 30) Glyptal polymer is obtained from ethylene

e glycol on reaction with ____________.

C) Polyvinyl chloride

ie nc
D) Nylon 6
A) butadiene B) phthalic acid
c
24) Which of the following is the biodegradable

S
polymer of polyester class?
C) bisphenol D) acetic acid

A) Nylon 2-nylon 6 B) Nylon 6,6 31) Which of the following is NOT a polyester
polymer?
C) PHBV D) Glyptal
A) Dacron B) Polycarbonate
25) PVC is prepared by the polymerisation of
____________.
C) Glyptal D) Perspex

A) Ethylen B) 1 -Chloropropene 32) Among the following, a natural polymer is

____________.
C) Propene D) 1-Chloroethene
A) Cellulose B) PVC
26) PVC is used for the ____________.
C) Teflon D) Polyethylene

33) Which of the following polymer is an example of

fibre?

Makode sir 9881175310 9322299182

 A) Silk B) Dacron A) dehydration B) dehydrogenation

C) Nylon 6,6 D) All of these C) decarboxylation D) dehalogenation

34) Which of the following is NOT a polymer? 40) Which of the following statements is
INCORRECT regarding ring opening
A) Glucose B) Enzyme polymerization?

C) Starch D) RNA A) This mode of polymerization happens by

free radical mechanism.
35) Which of the following is a natural polymer?
B) In this mode of polymerization, elemental
A) Terylene B) Clyptal composition of repeating unit is same as
that of the monomers.
C) Starch D) Nylon 6
C) ε− Caprolactam polymerize through this
36) (I) Natural rubber is an example of plant
polymer. (II) Cellulose acetate rayon is an u r
mode of polymerization.
t
example of synthetic polymer. (III) Wool is an
,j in
D) Cyclic compounds like lactams, cyclic
example of animal polymer. (IV) Neoprene is an
example of semisynthetic polymer. All the e s
ethers, lactones, etc. polymerize through
above statements are CORRECT, EXCEPT:
s s
this mode of polymerization.

A) I and IV B) II and III

la
41) An example of chain growth polymer is
C_____________.

i ng
C) I and III D) II and IV
c h A) nylon 6,6 B) bakelite
37) Which of the following polymer form net-like
structure? o a C) terylene D) teflon

e C 42) Which of the following is FALSE for

nc
A) Polythene B) PVC elastomers?

C) Polystyrene
c ie D) Melamine polymer A) Elastomers have weak van der Waals type of
S
38) Find the INCORRECT statement about free
intermolecular forces.
radical mechanism of addition polymerization.
B) In elastomers, tearing is prevented due to
cross linking.
A) Chain initiation step is very rapid and leads
to high molecular mass radical.
C) Vulcanised rubber is an example of
elastomer.
B) Benzoyl peroxide, acetyl peroxide, tert- butyl
peroxide, etc. can be used to produce free
radical. D) Elastomers are hard and cannot be
stretched easily.
C) The chain reaction is initiated by a free 43) Synthetic fibres like nylon 6,6 have very high
radical. tensile strength because they have __________.

D) Chain termination step can occur by

combination of two growing chain radicals.

39) Carboxy radicals formed from acetyl peroxide

on ___________ gives methyl radical.

Makode sir 9881175310 9322299182

 A) high molecular weights and high melting A) Elastomers
points
B) Thermosetting polymers
B) a high degree of cross-linking by strong C-C
covalent bonds C) Fibres

C) linear molecules consisting of very long D) Thermoplastic polymers

chains
48) Which of the following is NOT a homopolymer?
D) linear molecules interlinked with
intermolecular forces like hydrogen bonding A) Polyethylene B) PVC
and dipole-dipole forces
C) Dacron D) Orion
44) How many of the following are thermoplastic
polymers? PVC, Terylene, Bakelite, Neoprene, 49) Which of the following is a copolymer?
Polythene, Urea formaldehyde resin,
Polystyrene. A) Polystyrene
t u r
B) Buna-S

A) 2 B) 3 C) 4 D) 5 C) Nylon 6
,j in D) Nylon 6,6

e s
45) Among Bakelite, polyvinyl chloride, nylon 6, 6
and natural rubber, the polymer in which the s s
50) Which of the following is natural polymer?

intermolecular forces of attraction is weakest is

______________. C la A) Polyisoprene B) Polybutadiene

i ng C) Polyvinyl chloride D) Polyethylene

A) nylon 6 ,6 B) polyvinyl chloride
c h
C) Bakelite
o
D) natural rubbera
e C
46) Which of the following statements about
polymers is FALSE?

ienc
Sc
A) Thermoplastic polymers possess
moderately strong intermoleeular forces that
are intermediate between elastomers and
fibres.

B) Once hardened thermosetting polymers

become infusible and cannot be remoulded.

C) Thermosetting polymers are either linear or

branched chain polymers.

D) Fibres are polymers which possess high

tensile strength.

47) Which of the following polymers are rigid?

Makode sir 9881175310 9322299182

 Answer Sheet

Chemistry : Introduction to Polymer Chemistry

Total Questions : 50 Total Marks : 50

1 B 2 A 3 C 4 D 5 D 6 B 7 C 8 B 9 D 10 D 11 D 12 D
13 A 14 C 15 B 16 B 17 D 18 A 19 A 20 B 21 C 22 A 23 A 24 C
25 D 26 D 27 C 28 C 29 C 30 B 31 D 32 A 33 D 34 A 35 C 36 D
37 D 38 A 39 C 40 A 41 D 42 D 43 D 44 B 45 D 46 C 47 B 48 C
49 B 50 A

t u r
,j in
e s
s s
C la
i ng
c h
o a
e C
ie nc
Sc

Makode sir 9881175310 9322299182