0% found this document useful (0 votes)
17 views9 pages

Simulation Report Template

The document summarizes a static simulation analysis of a part called "Part1" performed with Solidworks. The model contains 1 solid body made of stainless steel. It was meshed with over 18,000 nodes and 10,000 elements. A pressure of 1,446 psi was applied to 1 face while another face was fixed. The maximum von Mises stress in the model was 1.547e+07N/m^2.

Uploaded by

Firdaus Jahari
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
17 views9 pages

Simulation Report Template

The document summarizes a static simulation analysis of a part called "Part1" performed with Solidworks. The model contains 1 solid body made of stainless steel. It was meshed with over 18,000 nodes and 10,000 elements. A pressure of 1,446 psi was applied to 1 face while another face was fixed. The maximum von Mises stress in the model was 1.547e+07N/m^2.

Uploaded by

Firdaus Jahari
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 9

Simulation of Part1

Date: Tuesday, 20 February, 2024


Designer: Solidworks
Study name: Static 1
Analysis type: Static

Table of Contents
Description...........................................1
Assumptions..........................................2
Model Information..................................2
Study Properties.....................................3
Units..................................................3
Material Properties.................................4
Loads and Fixtures..................................4
Connector Definitions..............................5
Description Interaction Information............................5
No Data Mesh information....................................5
Sensor Details........................................5
Resultant Forces....................................6
Beams.................................................6
Study Results........................................7
Conclusion............................................9

Analyzed with SOLIDWORKS Simulation Simulation of Part1 1


Assumptions

Model Information

Model name: Part1

Current Configuration: Default

Solid Bodies
Document Name and Document Path/Date
Treated As Volumetric Properties
Reference Modified
Cut-Extrude3
Mass:0.853509 kg
Volume:0.000110917 m^3 C:\Users\Firdaus\Desktop\
Solid Body Density:7,695.01 kg/m^3 Part1.SLDPRT
Weight:8.36438 N Feb 20 13:20:39 2024

Analyzed with SOLIDWORKS Simulation Simulation of Part1 2


Study Properties
Study name Static 1
Analysis type Static
Mesh type Solid Mesh
Thermal Effect: On
Thermal option Include temperature loads
Zero strain temperature 298 Kelvin
Include fluid pressure effects from Off
SOLIDWORKS Flow Simulation
Solver type Automatic
Inplane Effect: Off
Soft Spring: Off
Inertial Relief: Off
Incompatible bonding options Automatic
Large displacement Off
Compute free body forces On
Friction Off
Use Adaptive Method: Off
Result folder SOLIDWORKS document (C:\Users\Firdaus\
Desktop)

Units
Unit system: SI (MKS)
Length/Displacement mm
Temperature Kelvin
Angular velocity Rad/sec
Pressure/Stress N/m^2

Analyzed with SOLIDWORKS Simulation Simulation of Part1 3


Material Properties
Model Reference Properties Components
Name: SA240 S31803 SolidBody 1(Cut-Extrude3)
Model type: Linear Elastic Isotropic (Part1)
Default failure Max von Mises Stress
criterion:
Yield strength: 4.482e+08 N/m^2
Tensile strength: 6.205e+08 N/m^2
Elastic modulus: 1.999e+06 N/m^2
Poisson's ratio: 0.3
Mass density: 7,695.01 kg/m^3
Thermal expansion 1.6e-05 /Kelvin
coefficient:

Curve Data:N/A

Loads and Fixtures


Fixture name Fixture Image Fixture Details
Entities: 2 face(s)
Type: Fixed Geometry

Fixed-1

Resultant Forces
Components X Y Z Resultant
Reaction force(N) 0.00227833 0.000946045 -0.000583649 0.00253504
Reaction Moment(N.m) 0 0 0 0

Load name Load Image Load Details


Entities: 1 face(s)
Type: Normal to selected face
Value: 1,446.03
Units: psi
Pressure-1 Phase Angle: 0
Units: deg

Analyzed with SOLIDWORKS Simulation Simulation of Part1 4


Connector Definitions
No Data

Interaction Information
No Data

Mesh information
Mesh type Solid Mesh
Mesher Used: Blended curvature-based mesh
Jacobian points for High quality mesh 16 Points
Maximum element size 4.56585 mm
Minimum element size 4.56585 mm
Mesh Quality High

Mesh information - Details


Total Nodes 18481
Total Elements 10697
Maximum Aspect Ratio 3.7109
% of elements with Aspect Ratio < 3 100
Percentage of elements with Aspect Ratio > 10 0
Percentage of distorted elements 0
Time to complete mesh(hh;mm;ss): 00:00:02
Computer name: MSI

Sensor Details
No Data

Analyzed with SOLIDWORKS Simulation Simulation of Part1 5


Resultant Forces
Reaction forces
Selection set Units Sum X Sum Y Sum Z Resultant
Entire Model N 0.00227833 0.000946045 -0.000583649 0.00253504

Reaction Moments
Selection set Units Sum X Sum Y Sum Z Resultant
Entire Model N.m 0 0 0 0

Free body forces


Selection set Units Sum X Sum Y Sum Z Resultant
Entire Model N 0.000587463 0.00177193 -0.000623703 0.00196821

Free body moments


Selection set Units Sum X Sum Y Sum Z Resultant
Entire Model N.m 0 0 0 1e-33

Beams
No Data

Analyzed with SOLIDWORKS Simulation Simulation of Part1 6


Study Results

Name Type Min Max


Stress1 VON: von Mises Stress 7.463e-12N/m^2 1.547e+07N/m^2
Node: 5991 Node: 16495

Part1-Static 1-Stress-Stress1

Name Type Min Max


Displacement1 URES: Resultant Displacement 0.000e+00mm 2.230e+01mm
Node: 1 Node: 2012

Analyzed with SOLIDWORKS Simulation Simulation of Part1 7


Name Type Min Max

Part1-Static 1-Displacement-Displacement1

Name Type Min Max


Strain1 ESTRN: Equivalent Strain 2.718e-18 3.872e+00
Element: 8007 Element: 6054

Part1-Static 1-Strain-Strain1

Analyzed with SOLIDWORKS Simulation Simulation of Part1 8


Conclusion

Analyzed with SOLIDWORKS Simulation Simulation of Part1 9

You might also like