Scribd
Upload
1K views4 pages

ANCEL BM700 Update Guide

The ANCEL BM700 update guide outlines a 4 step process to update the device's software: 1) Download the update software from ANCEL's website; 2) Plug the USB into a computer where the device screen will light up; 3) Click "Update" in the software which will automatically update the main and library files; 4) The update completes and the device enters its main menu.

Uploaded by

Nacka
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
1K views4 pages

ANCEL BM700 Update Guide

The ANCEL BM700 update guide outlines a 4 step process to update the device's software: 1) Download the update software from ANCEL's website; 2) Plug the USB into a computer where the device screen will light up; 3) Click "Update" in the software which will automatically update the main and library files; 4) The update completes and the device enters its main menu.

Uploaded by

Nacka
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

ANCEL BM700 Update Guide

Step 1, Download the update software on ANCEL official website


https://anceltech.com/support/download (Must convert the RAR file to a folder
before updating).

Step 2, Plug the USB of the device into a computer, its screen will be light up, see
picture 1. If your computer runs with Windows 8 or 10, don’t need to install a driver,
just open the software “Update” directly and start to update, see picture 2.

Picture 1: When connect to the computer, the device screen displays as follows.

Picture 2: Open the update software.

If your computer runs with Windows 7, you have to install a driver first, and then
open the software “Update” to update.
Step 3, The update starts. Click “Update”.

The device screen displays as follows.


Updating the main file automatically.

Updating the library file automatically.

Step 4, The update completes.


The device enters into the main menu.

You might also like