Scribd
Upload
875 views

Transfer MIC Results To Batch Characteristics

This document describes how to link material inspection characteristics (MICs) to batch characteristics so that inspection results are automatically recorded in the batch characteristics. It involves creating a class and characteristic, assigning an inspection type, creating a MIC linked to the batch characteristic, configuring an inspection plan, recording inspection results which will copy to the batch characteristic, and checking the updated batch characteristic values. The process allows inspection results to be automatically transferred to batch records without manual data entry.

Uploaded by

Sagar Gande
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
875 views

Transfer MIC Results To Batch Characteristics

This document describes how to link material inspection characteristics (MICs) to batch characteristics so that inspection results are automatically recorded in the batch characteristics. It involves creating a class and characteristic, assigning an inspection type, creating a MIC linked to the batch characteristic, configuring an inspection plan, recording inspection results which will copy to the batch characteristic, and checking the updated batch characteristic values. The process allows inspection results to be automatically transferred to batch records without manual data entry.

Uploaded by

Sagar Gande
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 11

Transfer MIC results to batch characteristics

Create characteristic

Create class and assign characteristic in class


Assign class to material and assign 1 inspection type in qm view
01 inspection type assigned

Now create MIC with reference to batch characteristic


System will create mic as reference characteristic
Quantitative data will be automatically taken from characteristic
Now assign this MIC in inspection plan of material

Now to run this scenario make sure you have made configuration setting at plant level as
below
Now when GR will be done for material inspection lot will be generated and stock will be in
quality

If we check stock in MMBE


Display batch –
Currently no values maintained for batch characteristic.

Now From QA32 do result recording and usage decision

In result recording we will maintain results for all MIC

Here we have maintained 1.35 value for carbon content mic which is linked to batch
characteristic.

Now do usage decision and do stock posting


After doing UD we can check batch characteristic MIC results will automatically copied to
batch characteristic

Display batch –

You might also like