Motors

Automation
Energy
Transmission &
Distribution
Coatings

WECM
Electronically Commutated Motor
European Market

Moving air with

efficiency

Driving efficiency and sustainability

 www.weg.net

MOVING AIR WITH

EFFICIENCY
*Considering 20% less losses then IE5 according to the standard IEC TS 60034-30-2.

Electronically Commutated Motor with permanent magnets and built-in drive.

A comprehensive and versatile EC solution for a variety of air movement applications.
• Accurate speed control to guarantee fan performance and energy saving
• IEC footprint offering interchangeability with induction motors
• Market leading IE6 efficiency levels

Follow this movement towards higher efficiencies too.

2 www.weg.net
WECM Motors
 www.weg.net

Applications

Radial fans Axial fans Cooling

Efficiency Comparison
WECM motors efficiency meet IE6¹ Efficiency Levels, as are shown in the graphs below:
1500 and 1800 RPM 3000 RPM
94,0 94,0
92,0 92,0
90,0 90,0
88,0
88,0
86,0
86,0
84,0
84,0
82,0
82,0 80,0
Efficiency (%)

Efficiency (%)
80,0 78,0
78,0 76,0
76,0 74,0
74,0 72,0
72,0 70,0
68,0
70,0
66,0
68,0
64,0
66,0
62,0
64,0 60,0
62,0 58,0
60,0 56,0
0,12 0,18 0,25 0,37 0,55 0,75 1,1 1,5 2,2 3 3,7 4 0,12 0,18 0,25 0,37 0,55 0,75 1,1 1,5 2,2 3 3,7 4
Output (kW) Output (kW)

IE3 - 60034-30-2 IE4 - 60034-30-2 IE5 - 60034-30-2 IE6 - 60034-30-2 Three-phase Only Motor Single-phase Only motor IE3 - 60034-30-2 IE4 - 60034-30-2 IE5 - 60034-30-2 IE6 - 60034-30-2 Three-phase Only Motor Single-phase Only motor

Figure 8. Efficiency comparison for 1500 and 1800 RPM electric motors Figure 9. Efficiency comparison for 3000 RPM electric motors

1) The WECM reaches the future IE6 level of efficiency, the highest in the market - considering 20% less losses then IE5
according to the standard IEC TS 60034-30-2 - for variable speed electric motor.

Standards
WECM motors comply with the latest versions of the following standards and regulations:
 EN 60034-1: Rotating electrical machines - Part 1: Rating and performance
 EN 60034-2-1: Rotating electrical machines - Part 2-1: Standard methods for determining losses and efficiency from
tests (excluding machines for traction vehicles)
 EN 60034-5: Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating
electrical machines (IP code) – Classification
 EN 60034-6: Rotating electrical machines - Part 6: Methods of cooling (IC code)
 EN 60034-7: Rotating electrical machines - Part 7: Classification of types of constructions, mounting arrangements and
terminal box position (IM code)
 EN 60034-8: Rotating electrical machines - Part 8: Terminal markings and direction of rotation
 EN 60034-9: Rotating electrical machines - Part 9: Noise limits
 EN 60034-14: Rotating electrical machines - Part 14: Mechanical vibration of certain machines with shaft heights 56 mm
and higher - measurement, evaluation and limits of vibration
 IEC TS 60034-2-3: Rotating electrical machines - Part 2-3: Specific test methods for determining losses and efficiency
of converter-fed AC induction motors
 IEC TS 60034-30-2: Rotating electrical machines - Part 30-2: Efficiency classes of variable speed AC motors (IE-code)
 IEC 60072-1: Dimensions and Output Series for Rotating Electrical Machines Part 1: Frame Numbers 56 to 400 and
Flange Numbers 55 to 1080
 EN 60204-1: Safety of machinery - electrical equipment of machines - Part 1: General requirements
 IEC 61800-3: Adjustable speed electrical power drive systems - Part 3: EMC requirements and specific test methods
 IEC 61000-3-2: Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions
 IEC 61000-3-3: Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage
fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤16A per phase and not
subject to conditional connection
 IEC 61800-5-1:2007: Adjustable speed electrical power drive systems - Part 5-1: Safety requirements -
Electrical, thermal and energy (single-phase products)
 IEC 60335-1:2010 Household and similar electrical appliances - Safety - Part 1: General requirements (three-phase
products)
 2017/2102 (amending 2011/65/EU) - RoHS
 2014/35/EU - The Low Voltage Directive (LVD)
 2014/30/EU - Electromagnetic Compatibility (EMC) Directive

WECM Motors 3
 www.weg.net

WECM
WEG Electronically
Commutated Motor
Single-phase Motors Three-phase Motors
 Permanent Magnet,  Permanent Magnet,
Electronically Commutated Motor Electronically Commutated Motor
 Voltage: 220 to 277 VAC  Voltage: 380-480 VAC
 Frequency: 50/60 Hz input  Frequency: 50/60 Hz input
 Output power:  Output power:
0,12 to 1,1 kW at 1500, 1800 or 3000 rpm 0,12 to 4 kW at 1500, 1800 or 3000 rpm
 Aluminium frame / drive housing  Aluminium frame / drive housing
 Degree of protection IP55  Degree of protection IP55
 Mounting: IEC80 B3L  Mounting: IEC80 and IEC100, B3T
 Ambient temperature  Ambient temperature:
-20 to 40 °C (TENV)¹ -20 to 40 °C (TEAO)2
-20 to 60 °C (TEAO)2 -20 to 40 °C (TENV)¹ with de-rating
 Motor efficiency – IE63 -20 to 60 °C (TEAO) with de-rating
 Vibration Grade A  Motor efficiency – IE63
 Direction of rotation CW/CCW (selectable)  Vibration Grade A
 Continuous speed adjustment (200 to  Direction of rotation CW/CCW (selectable)
1500/1800 rpm and 500 to 3000 rpm) by:  Continuous speed adjustment (200 to
 Tact buttons (local) 1500/1800 rpm and 500 to 3000 rpm) by:
 DC voltage (remote): 2 to 10 VDC  Tact buttons (local)
 DC current (remote): 4 to 20 mA DC  DC voltage (remote): 2 to 10 VDC
 PWM (remote): 10 to 95%  DC current (remote): 4 to 20 mA DC
 Local controls optically isolated  PWM (remote): 10 to 95%
 With drain plug and ‘V’ ring sealing  Modbus Communication
 Sealed for life bearings  Alarm relay (NO & NC)
 Drive-end bearing cap  Local controls optically isolated
 Power and control cables 500 mm long  With drain plug and ‘V’ ring sealing
 Electronic protection: overload, over  Sealed for life bearings
temperature and locked-rotor.  Drive-end bearing cap
 Fire mode (Override & Maximum speed mode)  Connection box with push-in terminals
 Electronic protection: overload, over temperature
and locked-rotor.
 Fire mode (Override & Maximum speed mode)

Notes:

1. Totally Enclosed, Non-ventilated. Refer to WEG for electrical data.

2. Totally Enclosed, Air Over rated. Minimum airflow over motor frame and drive cover 5m/s.
3. The WECM reaches the future IE6 level of efficiency, the highest in the market - considering 20% less losses then IE5 according to the
standard IEC TS 60034-30-2 - for variable speed electric motor.

4 WECM Motors
 www.weg.net

Optional & Special Features

Single-phase Motors
 Passive PFC (Power Factor Correction)4  Customized shaft ends
 IEC80: Pad mounting (4 x 90° or 3 x 120°), T-slot  Double shaft ends (only with decentralised
(4 x 90° or 3 x 120°), FF-165 and FC-120 flanges drive version)
 Slinger seal for vertical shaft-up mounting  External controller with display to adjust
 115V input power supply (up to 0,55kW) maximum and instantaneous speed values
 Decentralised mounting (drive and motor separate)  TEBC blower cooling
 Customized cable lengths  Modbus Communication

Three-phase Motors
 IEC80: Pad mounting (4 x 90° or 3 x 120°), T-slot  Power supply cable and control cable installation
(4 x 90° or 3 x 120°), FF-165 and FC-120 flanges  Customized shaft ends
 IEC100: Pad mounting (4 x 90°), T-slot (4 x 90°),  Double shaft ends (only with decentralised drive
FF-215 and FC-160 flanges version)
 Slinger seal for vertical shaft-up mounting  External controller with display to adjust
 Decentralised mounting (drive and motor separate) maximum and instantaneous speed values

Figure 1. Foot mounting Figure 2. Pad mounting Figure 3. FF flange mounting

Figure 4. FC flange mounting Figure 5. T-Slot Figure 6. TEBC Motor

Figure 7. Decentralised

Notes:
4 - WECM single-phase motors may require the use of an external filter to comply with the harmonic current emissions requirements of EN
61000-3-2. Refer to WEG for further details.

WECM Motors 5
 www.weg.net

Electrical Data
Single-phase WEG Electronically Commutated Motors

220V / 1500 rpm 220V / 1800 rpm 220V / 3000 rpm

Cooling FLC In Torque Eff FLC In Torque Eff FLC In Torque Eff
Model kW Model kW Model kW
(A) (Nm) [%]¹ (A) (Nm) [%]¹ (A) (Nm) [%]¹
A2 0,12 1,4 0,76 83,0 A1 0,12 1,4 0,64 83,1 0,12 1,4 0,38 73,0
TENV A3 0,18 1,8 1,15 83,4 A2 0,18 1,9 0,95 83,5 A1 0,18 1,9 0,57 76,7
or
TEAO A4 0,25 2,3 1,59 84,0 A3 0,25 2,3 1,33 84,1 0,25 2,4 0,80 82,3
B 0,37 3,4 2,36 85,2 A4 0,37 3,5 1,96 85,3 A4 0,37 3,3 1,18 83,3
D 0,55 4,8 3,50 86,7 B 0,55 4,7 2,92 86,8 B 0,55 4,8 1,75 84,6
TEAO ² 0,75 5,8 4,77 88,2 D 0,75 6,2 3,98 88,2 0,75 5,9 2,39 86,3
E C
1,1 8,9 7,00 89,5 E 1,1 8,9 5,84 89,7 1,1 8,7 3,50 87,8

Note: 1) All data of the electrical table refers to the complete solution (Drive input current, Global Efficiency). Global solution
efficiency: Eff= h MOTOR x h DRIVE
2) 0.55kW solution is limited to 0.50kW TENV; 0.75kW solution is limited to 0.65kW TENV.

Three-phase WEG Electronically Commutated Motors

380V / 1500 rpm 380V / 1800 rpm 380V / 3000 rpm

Cooling FLC Torque Eff FLC Torque Eff FLC In Torque Eff
Model kW Model kW Model kW
In (A) (Nm) [%]¹ In (A) (Nm) [%]¹ (A) (Nm) [%] ¹
0,12 0,40 0,76 79,5 0,12 0,34 0,64 79,8 0,12 0,26 0,38 77,5
IEC80-A
0,18 0,56 1,15 81,1 IEC80-A 0,18 0,47 0,95 82,1 0,18 0,39 0,57 77,9
IEC80-A
IEC80-B 0,25 0,51 1,59 83,3 0,25 0,64 1,33 82,9 0,25 0,54 0,80 78,3
IEC80-C 0,37 0,75 2,36 83,6 IEC80-B 0,37 0,75 1,96 83,6 0,37 0,79 1,18 79,2
0,55 1,10 3,50 84,1 IEC80-C 0,55 1,10 2,92 84,1 0,55 1,15 1,75 80.3
IEC80-D IEC80-B
0,75 1,49 4,78 84,6 0,75 1,49 3,98 84,6 0,75 1,55 2,39 81,5
TEAO IEC80-D
IEC80-E 1,1 2,16 7,01 85,6 1,1 2,16 5,84 85,6 1,1 3,25 3,50 86,6
IEC80-C
IEC80-F 1,5 2,91 9,55 86,7 IEC80-E 1,5 2,91 7,96 86,7 1,5 4,42 4,78 86,6
IEC100-C 2,2 4,20 14,01 88,1 IEC100-B 2,2 4,20 11,67 88,1 2,2 4,28 7,01 86,4
IEC100-A
IEC100-D 3 5,66 19,10 89,1 IEC100-C 3 5,68 15,92 89,1 3 5,75 9,55 87,7
3,7 6,96 23.55 89,7 3,7 6,94 19,63 89,7 3,7 7,04 11,80 88,4
IEC100-E IEC100-D IEC100-B
4 7,48 25,46 89,9 4 7,48 21,22 89,9 4 7,58 12,73 88,7
Note: 1) All data of the electrical table refers to the complete solution (Drive input current, Global Efficiency). Global solution
efficiency: Eff= h MOTOR x h DRIVE.

6 WECM Motors
 www.weg.net

Mechanical Data
Single-phase Motors External dimensions (in mm)

Net Weight Package dimensions ( L x W x H in mm)

Model LC LD 6 L 1,2,3 L4
(kg) 7 1,2,3 4

A1 5,2
A2 5,8
90 245 258
A3 6,4 75
A4 7,7 370 x 225 x 220 365 x 260 x 270
B 9,2 265 278 (40 motors / pallet5) (24 motors / pallet5)
110
C 9,6 285 298
D 9,9 115 95 290 303
E 11,7 135 310 323
1) Foot mounting;
2) Pad mounting (4x90°);
3) Pad mounting (3x120°);
4) FF-165 flange mounting;
5) Pallet dimensions (LxWxH): 1200x800x1120 mm;
6) LD is the dimension of the drive in decentralised solution;
7) Approximate weight subject to change without notice.
8) Dimensions for TEBC and decentralised solutions can be provided upon request to WEG.

B3L mounting

Ø157
87
LD LC
Center Hole DM6 Center Hole DM6

15,5-0,1
Ø157 28
6 N9
h9

87 50
LD LC 0
Ø19 j6
159
-0,5

DE Shaft End
15,5-0,1
80

28
6 N9
h9
8

50
0
Ø19 j6
159

32 Power/control leads Ø10

100 50 40-0,3
125
120
-0,5

156 DE Shaft End

80

L
8

32 Power/control leads Ø10

100 50 40-0,3
125
157156 120
Center Hole DM6Center Hole DM6

L
B14L mounting
4xM6
(FC-120) LD LC

Ø100±0.2
157 15.5
-0.1
6 N9
h9

LD LC 28 500
4xM6
Ø80 j6
Ø120

Ø19 j6

Ø100±0.2
45°

15.5
DE
-0.1 Shaft End
6 N9
h9

28 500
90°
Ø80 j6
Ø120

Ø19 j6

3
40
45°

Power/control leads -0.3

DE Shaft End
90°
L

3
157 40
Power/control leads -0.3
87
LD
L LC
Center Hole DM6

157 15,5
28 -0,1
6 N9

87
h9

Power/control leads
LD LC 50
0
Center Hole DM6

15,5
28 -0,1
Ø19 j6

N9
h9

Power/control leads
6

50
4x

DE Shaft End 0
23

M12x1,75x18
8
0,

80 60 40-0,3
16

Ø19 j6
0,
8±

102
19
4x

DE Shaft End
L
WECM Motors 7
23

M12x1,75x18
8
0,

80 60 40-0,3
16

5
0,
8±

102
19
 L 28 15.5

h9 h
Cent
-0.1

6
6 N9
28 50 500
0

j6 j6
159

Ø19
Ø80 j6
Ø120

Ø19
www.weg.net

-0,5
45°
157 DE Shaft End

80

Center Hole DM6

DE Shaft End

8
LD LC
90°
4xM6
32 Power/control leads Ø10 3
Ø100±0.2 100 50 40-0,3
125 40
120
B30L mounting (4 x 90°) 156 Power/control leads
L
-0.3
15.5
-0.1

6 N9
L

h9
28 500

Ø80 j6
Ø120

Ø19 j6
157

45°
87 157
DE Shaft End

Center Hole DM6

LD LC

Center Hole DM6

90° LD LC
4xM6
3 15,5
Ø100±0.2 28 -0,1

6 N9
h9
Power/control leads 40
Power/control leads -0.3
15.5 50
-0.1 0

6 N9
h9
L 28 500

Ø80 j6
Ø120

Ø19 j6

Ø19 j6
157
45°

87
4x

DE Shaft End
DE Shaft End
23

LD LC

Center Hole DM6

90° M12x1,75x18
19 0,8

80 60 40-0,3
16

5
0,

3
8±

102
15,5
L 40 28 -0,1

6 N9
h9
Power/control leads Power/control leads -0.3
50
L 0

157

Ø19 j6
87
161
4x

LD LC DE Shaft End
23

87

Center Hole DM6

LD LC

Center Hole DM6

M12x1,75x18
8
0,

80 60 40-0,3
16

15,5
0,
8±

102 28 -0,1

6 N9
h9
19

Power/control leads
L 15,5
28 -0,1 50
0

6 N9
h9
50
0
B30L mounting (3 x 120°)

Ø19j6

Ø19 j6
DE Shaft End End
4x

DE Shaft
23

161
0°
12

87 M12x1,75x18
8
0,

LD LC 80 60 40-0,3
16

5
0,

Center Hole DM6

8±

Power/control leads
102
40-0,3
19

A
L
L
6x18,74-0,3 15,5
6x4,5+0,3

6x10,4 +0,3 28 -0,1

6 N9
h9
50
0
Ø19j6

161
87 DE Shaft End
6x6,5
6x18,54 -0,3 LD LC
0°

Center Hole DM6

12

Detail A

Power/control leads
A Ø200 40-0,3 15,5
Center Hole DM6

28 -0,1
6 N9
h9

L
45° 6x18,74-0,3 Ø12 50
6x4,5+0,3

6x10,4 +0,3 LD LC 0
Ø19j6

Ø165-±0.2
15.5 DE Shaft End
-0.1
0°

6 N9
h9

28
12

50
6x6,5 0
j6
Ø130

Ø19 j6

6x18,54 -0,3 Power/control leads

Detail
A A 40-0,3
L
6x18,74-0,3 DE Shaft End
6x4,5+0,3

Ø200 6x10,4 +0,3

Center Hole DM6

45° Ø12
LD
Power/control leads LC

3.5
Ø165-±0.2 40-0.3
120° 6x6,5
B5L mounting (FF-165) 6x18,54 -0,3
L 15.5
-0.1
6 N9
h9

Detail A 28
50
0
j6
Ø130

Ø19 j6

Ø200
Center Hole DM6

45° Ø12 DE Shaft End

LD LC

Ø165-±0.2
Power/control leads 15.5
-0.1
6 N9
h9

3.5 28
40-0.3 50
0
j6

120°
Ø130

Ø19 j6

DE Shaft End

Power/control leads

3.5
40-0.3
120°
L

8 WECM Motors
 www.weg.net

Three-phase Motors External dimensions (in mm)

Net Weight L Package dimensions ( L x W x H in mm)

Model LC LD ²
(kg) ³ B3/B30 B14 B5 B3/B30 B14 B5
IEC80-A 5,8
IEC80-B 6,4 90 256,1 269,1
IEC80-C 8,1 370 x 225 x 220 365 x 260 x 270
90,1
IEC80-D 8,5 100 266,1 279,1 (40 motors / pallet ¹) (24 motors / pallet ¹)
IEC80-E 9,9 115 281,1 294,1
IEC80-F 11,7 135 301,1 314,1
IEC100-A 17,5 105 315,8
IEC100-B 19,5 120 330,8 435 x 270 x 270
IEC100-C 21,0 135 95,3 345,8 (18 motors / pallet ¹)
IEC100-D 22,5 150 360,8
IEC100-E 26,0 175 385,8

1) Pallet dimensions (L x W x H): 1200 x 800 x 1120 mm;

2) LD is the dimension of the drive in decentralised solution;
3) Approximate weight subject to change without notice.
4) Dimensions for decentralised solutions can be provided upon request to WEG.

B3T Mounting

Frame 80
157 LD LC
45°
157 LD LC

Center Hole DM6

45°
103

Center Hole DM6

15.5-0.1

6 N9
h9
28
103

15.5-0.1
Ø19 j6
159

6 N9
h9
28

Ø19 j6
159

6 h9
80-0.5

DE Shaft End
6 h9
80-0.5
8

DE Shaft End
8

32 Ø10
125 100 Ø10 50 40
32 -0.3
156 125 120 40
100 50
-0.3
156 L
120

Frame 100 L

246
246
114.5
114.5
LD LC
LD LC
Center Hole DM10
Center Hole DM10
133.5
133.5

24
24-0.1 -0.1
45
N9
h9

45
N9
h9

8
233.2

8
233.2

Ø28 j6
Ø28 j6
100 -0,5

100 -0,5

7 h11 7 h11
DE DE
Shaft EndEnd
Shaft
8
8

34.8 Ø12
Ø12
34.8
160 140 63 60 -0.3
160 140 63 60 -0.3
195 165
195 165
L
L

157
LD LC WECM Motors 9
LD LC
157
M6
 7 h11

233.2

Ce
100

Ø28 j6
DE Shaft End

8
100 -0,5
34.8 www.weg.net Ø12
7 h11
DE Shaft End
160 140 63 60 -0.3

8
195 165
34.8 Ø12L
160 140 63 60 -0.3
B30T Mounting
195 (4 x 90°) 165
L

Frame 80 LD LC
157

LD LC
157

Center Hole DM6

4x9
0°

Center Hole DM6

103
15.5 -0.1 6x18,74-0,3
4x9

6 N9
6x4,5+0,3

h9
0° 6x10,4 +0,3

103
28
15.5 -0.1

6 N9
h9
28

j6
Ø19
Ø19j6
6 h9
6 h9
DE Shaft End 6x6,5
DE Shaft End 6x18,54 -0,3
3
x2
3x

234 Detail A
12
3x 0

4x
12°

,8
,8 0
0°

M12x1.75x18
AA 6 16
0 M12x1.75x18 Frames 80 can be supplied
5

1
0,
19 0,5

with pad mounting or T-Slot

8±

80 60 4060 40
8±

80
19

-0.3
-0.3 (3x120°).
102 102
L L

Frame 100
246.5
246.5
114.5
LD LC
114.5
LD LC

Center Hole DM10

Center Hole DM10

133.5

24 -0,2
133.5

45

N9
8 h9
24 -0,2

Ø28 j6
45

N9
8 h9
Ø28 j6
.5 7 h11
±0
6

DE Shaft End
5.
12

.5 7 h11
±1 ±0
6

DE Shaft End
2

5.
1.

M12x1.75X18
12
25

100 83 60-0.3
±1 122
2
1.

M12x1.75X18
25

L
100 83 60-0.3
122
L

B5T Mounting

Frame 80 (FF-165)

Ø200
Center Hole DM6
103

45° 15.5 -0.1

N9
6 h9

28
Ø130 j6

Ø19 j6

6 h9
DE Shaft End

4xØ12 LD LC 3.5

40
Ø165 ±0,2 -0.3

Ø250
LD LC

10 WECM Motors
Ø215±0.3
le DM10
33.5
 Center Hole DM6
C
Ø130 j6
Ø19 j6

103
45° 15.5 -0.1
6 h9

N9
6 h9
28 www.weg.net
DE Shaft End

Ø130 j6
Ø19 j6

Ø200
6 h9
B5T Mounting 4xØ12 LD LC 3.5 DE Shaft End
40
Ø165 ±0,2 -0.3

Center Hole DM6

Frame 100 (FF-215) L

103
45° 15.5 -0.1
Ø250

N9
6 h9
28
LD LD LC
LC 3.5
4xØ12

Ø130 j6
40 Ø19 j6
Ø165 ±0,2 -0.3

Ø215±0.3 L

Center Hole DM10

6 h9

133.5
DE Shaft End
Ø250
24-0,2
LD LC

N9
8 h9
Ø28 j6
Ø180j6
4xØ12 Ø215±0.3 LD LC 3.5

Center Hole DM10

40

133.5
Ø165 ±0,2 -0.3 7 h11
L 24-0,2
45 DE Shaft End

Ø250
LC

Ø28 j6
LD

Ø180j6
4xØ15
4

Ø215±0.3 60-0.3

Center Hole DM10

157 L
133.5

45 24-0,2 DE Shaft End

B14T Mounting

N9
8 h9
Ø28 j6
Ø180j6
4xØ15
Frame 80 (FC-120) 4

Center Hole DM6

16
1 60-0.3 7 h11
103

45°157 L 15.5 -0.1

45 DE Shaft End

N9
h9
28

6
Ø120
Ø80 j6
Ø19 j6
4xØ15
4
6 h9
60-0.3
DE Shaft End

Center Hole DM6

157 L
16
1
103

45° 3 15.5 -0.1

N9
4xM6

h9
LD LC 40 28
-0.3

6
Ø100 ±0,2 L Ø120
Ø80 j6

Ø19 j6
Center Hole DM6

16
246.5 1
103

45° 114.5 LD LC 15.5 -0.1 6 h9

N9
h9
28 DE Shaft End

6
Ø120
Ø80 j6

Ø19 j6
Center Hole DM10

3
Ø130±0,2
133.5

4xM6 LD LC 40 6 h9
-0.3 24
DE Shaft End-0,2

N9
h9
Ø100 ±0,2 L 45
8
j6
Ø110 j6

Ø160

3
Ø28

246.5
4xM6 LD LC 40
Frame 100 Ø100
(FC-160)
114.5 ±0,2
LD LC
-0.3

L 7 h11
DE Shaft End

246.5
Center Hole DM10

114.5 LD LC
Ø130±0,2
4xM8x1.25 4
133.5

60 24-0,2
-0.3
N9
8 h9

L
45
Center Hole DM10

Ø130±0,2
j6
Ø110 j6
133.5

Ø160

Ø28

24-0,2
N9
h9

45
8
j6
Ø110 j6

Ø160

7 h1
Ø28

DE Shaft End

7 h11
DE Shaft End
4xM8x1.25 4
60
-0.3

4xM8x1.25 L 4
60
-0.3

WECM Motors 11
 The scope of WEG Group solutions is
not limited to the products and solutions
presented in this brochure.
To know our portfolio, contact us.

For WEG's worldwide

operations visit our website

www.weg.net

+55 47 3276.4000

[email protected]

Jaraguá do Sul - SC - Brazil

MOTORS

Cod: 50076406 | Rev: 07 | Date (m/y): 10/2022.

The values shown are subject to change without prior notice.
The information contained is reference values.