Scribd
Upload
51 views2 pages

CYFGCS50LRSH

This document describes the CYFGCS50LRSH current sensor, which uses a fluxgate closed-loop principle to measure DC, AC, pulse, and irregular waveform currents under galvanic isolation. It has high accuracy, sensitivity, and resolution with low temperature drift. The sensor is used in instrumentation, medical equipment, metrology, laboratories, power supplies, electric vehicles, and other applications. It provides galvanic isolation between the primary and secondary circuits, with high linearity and reliability in small package sizes.

Uploaded by

Melvis Villegas
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
51 views2 pages

CYFGCS50LRSH

This document describes the CYFGCS50LRSH current sensor, which uses a fluxgate closed-loop principle to measure DC, AC, pulse, and irregular waveform currents under galvanic isolation. It has high accuracy, sensitivity, and resolution with low temperature drift. The sensor is used in instrumentation, medical equipment, metrology, laboratories, power supplies, electric vehicles, and other applications. It provides galvanic isolation between the primary and secondary circuits, with high linearity and reliability in small package sizes.

Uploaded by

Melvis Villegas
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Version 1

Released in January 2024


ChenYang
Dr.-Ing. habil. Jigou Liu Technologies GmbH & Co. KG

Fluxgate Closed Loop Current Sensor CYFGCS50LRSH


CYFGCS50LRSH is a current sensor based on the fluxgate closed-loop principle, and can be
used for measuring DC, AC, pulse and various irregular waveform currents under galvanic
isolation conditions. It has ultra-high accuracy and linearity, ultra-high sensitivity and resolution,
very low out-of-phase current and temperature drift. It is widely used in instrumentation, medical
equipment, metrology and calibration, laboratories, high-precision power supplies, new energy
vehicles and so on.

Features Applications
• High electrical isolation • Battery supplied applications
• High linearity, high accuracy • Uninterruptible power supplies (UPS)
• High reliability • Variable speed drives
• Good overload capability • Welding machine
• Small sizes • Electric power network monitoring
• Insulated plastic case recognized • AC frequency conversion servo-motors
according to UL94-V0 • Electrochemical applications
• Very good property-price ratio

Technical Data
Parameters Values Unit
CYFGCS CYFGCS CYFGCS CYFGCS CYFGCS CYFGCS
Part number
0.5LRSH 1LRSH 5LRSH 10LRSH 20LRSH 50LRSH
Rated input current IPN 0.5 1 5 10 20 50 A
Current measuring range IP 0~±1 0~±2 0~±10 0~±20 0~±40 0~±75 A
Rated output voltage 5±0.2% 5±0.2% 5±0.1% 5±0.1% 5±0.05% 5±0.05% V
Turns ratio KN 1:200 1:200 1:500 1:500 1:1000 1:1000
Supply voltage ±15(±5%) V
Current consumption At Vc=±15V 15 + IP/KN mA
Isolation voltage 2.5kV rms/50Hz/1min between primary and secondary circuits
Linearity <0.01 %FS
Zero offset voltage TA=25℃ <±5 mV
Thermal Drift of Offset
Voltage VP=0，TA=-25~+85℃ <±0.01（≤1A±0.03） mV/℃

Response time <1 µs


Bandwidth(-3dB) DC~100 kHz
Following accuracy di/dt >100 A/μs
Operating Temperature -25~+85 ℃
Storage Temperature -40~+100 ℃
Load Resistance ≥10k 
Mass (approx.) 46 g
Used standard Q/320115QHKJ01-2016

Markt Schwabener Str. 8 Tel.: +49 (0)8121 – 2574100


D-85464 Finsing Fax: +49 (0)8121– 2574101
Germany Email: [email protected]
http://www.cy-sensors.com
Version 1
Released in January 2024
ChenYang
Dr.-Ing. habil. Jigou Liu Technologies GmbH & Co. KG

Case Style and Connection

Pin arrangement: 1: +15V 2: -15V 3: VOUT 4: 0V (power ground)


OFS: Zero Adjustment

Application Note

1. Incorrect wiring may cause damage to the sensor. After the sensor is powered on, the
same-phase voltage value can be measured at the output when the measured current
passes through the sensor in the direction of the arrow.
2. The dynamic characteristics (di/dt and response time) are optimal when the input current
drain completely fills the primary current input perforation.
3. The temperature of the primary busbar or cable should not exceed 100°C.
4. The installation and use environment of the sensor should be free of conductive dust
and corrosive gases.
5. The sensor is a precision device, it should be lightly handled and put away when using
and avoid violent vibration or high temperature.

Markt Schwabener Str. 8 Tel.: +49 (0)8121 – 2574100


D-85464 Finsing Fax: +49 (0)8121– 2574101
Germany Email: [email protected]
http://www.cy-sensors.com

You might also like