TRISHUL PAINTS CATALOGE

S.No. Product Chemistry Appearance % Solid Viscosity @ 30 C,B4Cup CC Theoretical Properties Applicatoins Primers
content
Red Oxide metal primer g Alkyd Matt to egg 60-62 % Brushing Viscosity 15-20 High solid , fast drying, Good adhesion to steel ,corrosion
based FD shell sqmt/ltr@30microns value for money, non resitance good adhsion to subsequent
Primer setteling coat
1 ROZC
As per
IS2074

Grey Primer Alkyd Matt to egg 60-62 % Brushing Viscosity 12.0 - 14.4 sq Keeping Properties: Serves as excellent primer surfacer
based FD shell mtr/ltr/coat Upto nine months as with suitable top coat: Brush, Roller,
Primer long as the sealed Spray
2 Staving/Air containers are kept under
drying cover in a dry place
under normal
temperature conditions
Alkyd Matt to egg 55-58 % Brushing Viscosity The Trucare Yellow The Trishulite Yellow The benefits of Trishulite Metal Primer
Zinc Phosphate Yellow Primer based FD shell Metal Metal Primer shelf life: 1 are protection and performance.
(Anticorrosive) Primer Primer coverage is 1 years from date of
coat
manufacture in original
180 - 200 sq.ft 2
coats* 90 - tightly closed containers
110 sq.ft away from direct
3
sunlight and excessive
heat.
 Cement Primer White Alkyd Matt to egg 62-65 % Brushing Viscosity By Brush 2 years from the date of Apply 1 coat of cement primer after
based/water shell should be 40-50 sec Application 1 coat manufacturing as long as diluting properly & straining thought a
based FD at 30 C & ford cup 80-100 sq ft container is sealed and clean cloth. It can be applied by Brush,
4 Primer B4 and in case of kept at normal Roller or spray.
spray application it tempratures ( not in
should be sec at 30C direct sunlight or
in ford cup B4. elevated tempuratures)
Cement Primer Special With More 60%-62% - By brush Bitter accession to Apply 1 coat of cement primer after
( Mushroom,Lite pink, Grey) special economical Application 1 coat substrate and subsequent diluting properly & straining thought a
additives 100-120 sq ft coat clean cloth. It can be applied by Brush,
Roller or spray.

Synthetic Enamel Paints

 Synthetic enamel paint Special Alkyd Glossy 45-48 % May be used. 15-16 Sq mts/ltr at A solvent based Recommended method of application.
Category ( Phiroza, Golden based Smooth & Dilution of the paint DFT of synthetic enamel BRUSH, ROLLER or SPRAY
yellow, Lemon yellow, Mint Under Uniform to 18- 30-32 microwns specially formulated for
green, P/O Red, Signal red, Ox 20 secs on Ford Cup
coting refinishing all types of
Blue, Golden brown B4 at 30 °C with
finishing automobiles, industrial
Solvalux 7-9 to
As per machinery and
ensure good
IS2932 appliances. 12 months
6 application
minimum when stored as
properties.
prescribed in the MSDS.

Synthetic enamel Genral Alkyd Glossy 45-48 % A - Brushing 55-60 20 sqm. / Ltr. / Colour Selected Range Recommended method of
Category (Smoke grey, DA based Smooth & Sec by B-4 Cup at Coat at 20µ Dry / As IS Shade Card application. BRUSH, ROLLER or
Grey,AD Ger,Oliv Green R/O Under Uniform 30°C B – Spraying Film Thickness Finish Smooth & SPRAY
Enamel, Black ,Special Brow 25-30 Sec by B-4 (DFT)
coating Glossy Gloss Above 86
Recommended method of Cup at 30°C 90 –
Finishing 100 Sec. By Ford AT 60° Head Flash
application. BRUSH, ROLLER
as per IS- Cup B-4 Point Above 35°C True
7 2932 Pigments 10-14
depending upon the
shade Binder Solid
36% ±2 Volume Solid
42% ±2

Water Based Paint

 Water Based (White Interior & Emulsion Matt to egg About 70 Brushing Viscosity 300 - 400 Sq. For best results, apply at temperatures
Exterior Emulsion Paint) In Based shell % Ft./Gal. depending between 50°F - 90°F. Temperatures
Various Shades on the surface above 90°F may affect the application
texture, porosity and such as drying too fast. Avoid painting in
application method. direct sun. • Shelf life under normal
8
Does not include the conditions is two years unopened. •
loss of material Partially used cans might develop
from spraying. skinning if not tightly sealed.

Black Japan Paint Solvent Black 50% Brush ,roller, spray 100-20 sq. mts per Finish: glues matt, Red oxide
based MIN. ltr at D.F.T mid.sheen
40microns fast Drying

Bituminous Paint ( Black ) Bitumen Black With 50% - 70% - 80% Be 4 cup 10%-20% Sq. Mts ACID Alkali resistance Self-priming
solvent mid sheen 52% water Resistance
additives

10

11] Aluminium Paint for General Purposes in Dual Container-IS 2339

12] Aluminium Paint, Heat Resistant- IS 13183
13] Bitumen Primer for us in waterproofing and Damp-proofing – IS 3384
14] Black Japan, Type A, Type B, Type C-IS 341
15] Chemical Stripper (Defence)-IS 430
16] Enamel Paint Remover (Q2)
17] Enamel, Synthetics, Exterior: (A) Under coating (B) Finishing Paint –IS 2932
18] Epoxied Finishing Paint (BHEL)(Q3)
19] Epoxy Based Zinc Phosphate Primer (Two Pack) Epoxy Based Zinc Phosphate Primer (two Pack)-IS:1323
20] Epoxy Red oxide Zinc Phosphate wieldable Primer, two component-IS14506 (Q3)
21] Heat Resistant Aluminium Paint-BHEL
22] Heat Resistant Aluminium Paint – Gr.1 (Temp. Unto600DegC)-bhel-IS: 13183, IS: 101
23] High Build Intermediate Epoxy Paint (BHEL)
24] Marine Paints
25] Paint, RFU, Finishing, Air Drying Brushing/Sprying
26] Polyurethane Full Gloss Enamel (Two Pack)-Is: 13213
27] Ready Mixed Paint for road marking –IS: 164
28] Ready Mixed paint, Air Drying for general purpose –IS: 168
29] Ready Mix Paint, Air Drying, Red Oxide-zinc phosphate, priming-IS: 12744
30] Ready Mixed, Air Drying, Red Oxide Zinc Chrome, Priming-IS: 2074
31] Ready Mixed Paint, Brushing, Acid Resisting
32] Ready Mixed Paint, Brusing, Bituminous, Black, Lead Free, Acid, Alkali and Heat Resisting-IS: 158
33] Ready Mixed Paint, Brusing, Bituminous, Black, Lead Free, Acid, Alkali, Water and Chlorine Resisting –
IS: 9862
34] Spray Paint Orange
35] Thinner for cellulose Nitrate based paints and lacquers
36] Thinner for epoxy paints (BHEL)
37] Zinc ethyl silicate primer (main coat) –IS: 14946
38] Zinc Priming paint, Epoxy based, two pack- IS: 14589
39] Red oxide Enamel As per Relevant RDSO Specifications.
40] Epoxy Primer/Paint as per relevant IS & RDSO specifications.
41] PU Primer/Paint as per relevant IS & RDSO specifications.
42] Olive Green paint Matt Finish AS per IS: 220
43] Camouflaging paint
44] Indian Olive Green Paint