Project Catalog # Type

Prepared by Notes Date

Fail-Safe
FSN6 Fail-Safe Sealed Narrow 6"

6” Width / 4" Aperture

2', 4', 8' Lengths
Full Protective Clear Outer Lens
Lumen and Color Selectable
Typical Applications
High Abuse • Healthcare • Sterile • Behavioral Health • Cleanroom • Canopies
• Locker Rooms • Bathrooms • Food Service / Processing • Patient Rooms

Product Certification
Interactive Menu
• Order Information page 2

• Energy Data page 4

• Product Warranty
Product Features

Top Product Features

Designed to provide safe and convenient
means of disconnecting power

• Fully luminous luminaire for use in high abuse, medical, wet location, and sterile applications
• NSF listed for use in food service/food processing applications
• Wet location under covered ceiling; ideal for canopies
• ISO5-9 certified
• Selectable lumens (3) and CCT (3) for design flexibility, factory pre-set lumens and/or CCT available
• Optional polycarbonate lens for impact resistance. IK10 rated
• IP65 and IP66 available for water and dust ingress protection
• Continuous run capable, using the flex conduit assembly (details, page 3)

Dimensions
Front View 7/8"
[21mm]

4-3/16" 5-7/8"
[106mm] [148mm]

Aperture: 8 ft. = 94-3/16" [2392mm], 4 ft. = 46-3/16" [1174mm], 2 ft. = 22-1/8" [562mm]

Side View (Typical)

Cross section FSN6
2 ft.
2-13/16" [71mm] (with CP375 lens option)

8-3/16" 7/8" Continuous

[207mm] [22mm]
23-7/8" [605mm]
adhesive gasket
Closed cell gasket,
4 ft. Bottom lens, clear acrylic or polycarbonate factory applied,
(see ordering info for thickness choices) between fixture and
8-13/16"
[224mm] T-grid (or dry wall
47-13/16" [1215mm]
(2) 68" L-brackets secured to the back of the fixture framing kit)
for additional structural rigidity
8 ft.

8-3/4" additional
[223mm]
95-13/16" [2434mm] product diagrams

PS519391EN page 1
January 4, 2024 8:09 AM
 Fail-Safe FSN6
Order Information
SAMPLE ORDER NUMBER: 2FSN6-50D-CP125-L840-HCD (Factory set Lumens / Factory set CCT -1%dimming driver, 0-10v)
SAMPLE ORDER NUMBER: 8FSN6-75D-CA08-L830-HCD (Factory set Lumens / Factory set CCT -1%dimming driver, 0-10v)
SAMPLE ORDER NUMBER: 4FSN6-SL1-CA125-L8SCT3 (Field selectable Lumens / Field selectable CCT -10% dimming, selectable driver, 0-10v)
SAMPLE ORDER NUMBER: 4FSN6-75D-CP125-L840 (Factory set Lumens / Factory set CCT -10% dimming, selectable driver, 0-10v)

Domestic Preferences Length Series Lumen Output Lens Voltage Emergency

Domestic Preferences (16) Length Series Lumen Output Lens Voltage Emergency

[Blank]=Standard 2=2' FSN6 SL1=Field Select Lumens: 500, 750 CA08=0.080" Thick Clear Acrylic [Blank]=Universal [Blank]=None
BAA=Buy American Act 4=4' and 1000 lumens per foot (1), (2) CA125=0.125" Thick Clear Acrylic Voltage 120-277 EL7W=7-watt, 120V-277V emergency
TAA=Trade Agreements Act 8=8' 50D=500 lms/ft. CP125=0.125" Thick Clear Polycarbonate 347=347 Volt (3), (4) battery pack installed (4) (13)
75D=750 lms/ft. CP187=0.187" Thick Clear Polycarbonate EL14W=14-watt 120V-277V emergency
100D=1000 lms/ft. CP250=0.250" Thick Clear Polycarbonate battery pack installed( 4) (13)
ETRD=Emergency Transfer Relay with
dimming control (4) (13)

Notes Notes Notes Notes

(16) Only product configurations with (1) Available with standard selectable, 10% (3) 347V offered only with (6) In Emergency mode the fixture will default to
these designated prefixes are built to be dimming driver only. (2) Lumen selectable and the UNV (Blank) and HCD 4000K regardless of the CCT setting.
compliant with the Buy American Act of CCT selectable only available together, with a driver options.
1933 (BAA) or Trade Agreements Act of standard 0-10V dimming (10%) driver. (7) Integrated Emergency is not available on the 2
1979 (TAA), respectively. Please refer to (4) 347V not available with foot options, or with any alternate driver options.
DOMESTIC PREFERENCES website for *Factory can pre-set lumen and CCT with EL7W, EL14W, or ETRD.
more information. Components shipped standard selectable driver. Example: 4FSN6- (13) EL7W, EL14W, ETRD options are not applicable
separately may be separately analyzed 75D-CP125-L840. Factory will set Lumens when using the HCD driver option.
under domestic preference requirements. and CCT specified by customer, and attach
protective cover over settings.

CCT Factory Wiring Driver Type Options

CCT Factory Wiring Driver Type Options

L8SCT3=80CRI, Field Selctable 90-A3/8-4/18GDIM=3/8" Flex with 0-10V Dimming Leads [Blank]=10% dimming with Lumen and CCT selector IP66=IP66 Rated (14)
CCT 3000K, 3500K, 4000K (8) 90-A3/8-5/18GDIM=3/8" Flex with 0-10V Dimming Leads, with red wire for EM switches (10%-100%) (12)
L830=80CRI, 3000K control HCD=0-10V Driver (1%-100% Dimming) (9) (11), (13) HS=High Security. 2ft & 4ft lengths only.
L835=80CRI, 3500K SD=Step Dimming Driver (50% or 100% Dimming) (10) Designed for use in behaviorial high risk
L840=80CRI, 4000K LH=Lutron HiLume (LDE1 series) 1%-100% EcoSystem areas, ligature-resistant. Robust steel
Driver with Soft-on Fade to Black dimming (F) frame is factory-attached to the FSN,
tamper-resistant hardware, and minimum
.250" clear polycarbonate lens.
Ceiling cut-outs:
6" x 2' = 7.87" x 25.87"
6" x 4' = 7.87" x 49.87"

Notes Flexible Metal Conduit Options Notes

(8) Lumen selectable and CCT Most common options listed. Multiple flex options are available for use in 0-10V dimming control, (9) 2' unit only at 1000 lms/ft. (10) Step Dimming not available in (14) IP66, Includes brackets that are used to
selectable only available together, DALI dimming control and/or emergency. This option is factory-installed and pre-wired to driver, 2' version. 750lm/ft only for 4' version, 500 and 750lm/ft only for 8' secure the luminaire to the T-bar grid or drywall
with a standard 0-10V dimming fitted to luminaire junction box with 90° enclosed FMC connector. Not all options may be combined version. (F) Consult Marketplace Options - Lutron system pages framing kit. The water pressure required for
(10%) driver. and installation ratings vary by type. Also available as an accessory for field installation for row for additional details and compatibility. Compatible only with driver IP66 testing lifts the FSN off the grid/drywall
mounting with 14Ga. wires. See notes in accessories section. series shown. Requires field commissioning to operate or dim. Contact framing kit. Brackets are necessary to ensure
*Factory can pre-set lumen and CCT Lutron at www.lutron.com (11) HCD driver, fixed output, requires IP66 compliance.
with standard selectable driver. Notes: Factory installed dimming option 3/8" flexible metal conduit with 2-#18 power and ground lumens and cct to be specified in ordering logic. (12) Specifying the
Example: 4FSN6-75D-CP125-L840. wires and 2-#18 UL-listed jacketed 0-10V +/- control wires. default (blank) 10% driver is typically the most expeditious manner
Factory will set Lumens and CCT to build and ship product..Example: 4FSN6-SL1-CA125-L8SCT3 (13)
specified by customer, and attach HCD driver option is not applicable with Emergency options, EL7W,
protective cover over settings. EL14W, or ETRD.

Continuous Run Fixtures

Flex Assembly (Conduit)
Accessories • 3/8" metal conduit with snap-in 90° fitting
• Includes two low voltage conductors (pink/violet) *
Accessories (14) (15)
• Includes two hot line voltage conductors (black/red)
• Includes green (ground and neutral (white)
DFCL-0624W-U* =Cleanroom drywall kit 6" x 2' • Connect fixtures from one fixture J-box to the next
DFCL-0648W-U* =Cleanroom drywall kit 6" x 4' • Continuous run fixtures, not a continuous line of light
DFCL-0696W-U* =Cleanroom drywall kit 6" x 8'
DFVR/FSN-0624W-U* =Vandal drywall kit 6" x 2'
DFVR/FSN-0648W-U* =Vandal drywall kit 6" x 4' Catalog UPC Description
DFVR/FSN-0696W-U* =Vandal drywall kit 6" x 8'
SCTCOV-PK=Selectable CCT and lumen switch, tamper-resistant replacement 90 Degree connector, 5 wire with EM and Dimming, 6' length - use
cover accessory. Kit is included with each product. 90-5-14GDIM-6 80083909766
90-5-14GDIM-6=Five 14 gauge conductor conduit assembly 72" for use with 2' with 2' and 4' fixtures
and 4' versions (14)
90-5-14GDIM-9=Five 14 gauge conductor conduit assembly 108" for use with 90 Degree connector, 5 wire with EM and Dimming, 9' length - use
90-5-14GDIM-9 80083909780
8' version (14) with 8' fixture
FPEQ=Earthquake clip kit for use where required

Notes 90 deg. conduit fitting w/screw clamp

conduit connection and snap-in KO connection * Constructions built before Jan
2022 may have gray wire for 0-10
* For Antimicrobial matte white finish , replace the W with AMW. dimming control present. In these
(14) 14A Rated, max. units per feed @120V: 2'=23, 4'=17, 8'=10; @277V; 2'=66, 4'=47, 8'=26 cases, the installer will label the gray
building wire as a 0-10 dimming
(15) Accessories sold separately will be separately analyzed under domestic preference Green wire and connect to our product’s
requirements. Consult factory for further information. Green pink 0-10V dimming control wire.
Pink Pink Reference NFPA70 (2020 NEC),
Violet Violet section 410.69.
Red Red
White White
Black Black

PS519391EN page 2
January 4, 2024 8:09 AM
 Fail-Safe FSN6
Product Specifications
Construction LED and Light Engine Compliance
• Ideal for use in shallow plenum or low ceiling spaces • Stock driver enables selectable lumens and color • cULus listed for 25C ambient environments
• Under 3" with thickest lens, leaves room to spare • Approximately 500, 750 or 1000 lumens per • IP66 ingress protection
in tight spaces foot AND 3000K, 3500K or 4000K CCT with easy • ISO5-9 certified
• Clear bottom lens to seal fixture from below access selector switch • NSF rated; Splash, Non-Food Zone -which is a
• Aluminum extruded frame, precision welded and • UNV 120 - 277V driver with 0-10V dimming to 10% typical rating for lighting equipment not subjected to
ground for a seamless appearance standard direct food contact. (e.g. ceiling mount luminaires).
• Architectural matte white powder coat paint • 347V version available Examples of equipment subjected to direct food
• Steel back plate, attached to the frame with multiple contact would be cutting boards, work-tables,
screws to ensure a tight fit Emergency Battery Options mixers, can-openers, other)
• Integral grid clips • Optional 120-277V emergency battery available in • Wet Location rated
7W or 14W • IC rated for direct insulation contact
• Junction / wiring box incorporates 8 qty. 7/8” KO’s
(2 on the top, 2 each on 3 sides of the box) for quick • 90-minute backup period for code compliance • RoHS compliant
and easy electrical entry from a variety of directions • Generator transfer option available
• Factory or field installed flexible conduit with Warranty
dimming leads options available. Optical System • Five year warranty standard
• Acrylic light guide with embossed optical control • Ten year warranty available
features optimizes light extraction
• Scratch and impact resistant diffuser provides
uniformity and reduced glare at the aperture

Back Details
Back View With EM/Sensor Box
2 ft. 7/8" 7/8"
5-7/8" [23mm] 1-7/8" [20mm]
[148mm] [48mm]

6-7/8"
[174mm]

4 ft.

Ceiling Compatibility
7-1/2"
[190mm] 68"[1727mm]
8 ft.

9/16"or 15/16" 9/16"or 15/16" 9/16"or 15/16"

Grid/Lay-in Concealed T Slot Grid
7-1/2" (2) 68" L-brackets secured to the back of the fixture for additional structural rigidity Standard
[190mm]

Mounting Choices
Grid
9/16", 15/16" Inverted T, Slot Grid
6" [152mm] 6" [152mm]

9/16"or 5/16" Slot grid

T-grid
Hard Ceiling Recessed
Use drywall frame kit: 2 ft.=DF-62W-U
4 ft.=DF-64W-U
8 ft.=DF-68W-U

6" [152mm]
See accessory section for ordering information

Lumens and CCT Switchess

SCTCOV Transparent cover is included and available as
a replacement part. Includes tamper proof
Easy Access Lumens and CCT Switches screws where required and standard Phillips
screws where desired.

Phillips Head
screws

3/4" Center reject torx

[19mm] screw - T8

PS519391EN page 3
January 4, 2024 8:09 AM
 Fail-Safe FSN6
Energy and Performance Data by Catalog Number
Lumen Output Wattage Efficacy
Lumen Setting Lumen Setting Lumen Setting

Catalog Number CCT Low Medium High Low Medium High Low Medium High
3000 1150 1685 1987 10.9 16.1 19.4 106 105 102
2FSN6-SL1-CA08-L8SCT3 3500 1181 1725 2044 10.8 16.1 19.4 109 107 105
4000 1196 1751 2061 10.8 16.0 19.4 111 109 106
3000 1148 1682 1983 10.9 16.1 19.4 105 104 102
2FSN6-SL1-CA125-L8SCT3 3500 1179 1722 2041 10.8 16.1 19.4 109 107 105
4000 1194 1748 2058 10.8 16.0 19.4 111 109 106
3000 1121 1642 1937 10.9 16.1 19.4 103 102 100
2FSN6-SL1-CP125-L8SCT3 3500 1151 1681 1993 10.8 16.1 19.4 107 104 103
4000 1166 1707 2009 10.8 16.0 19.4 108 107 104
3000 1107 1621 1912 10.9 16.1 19.4 102 101 99
2FSN6-SL1-CP187-L8SCT3 3500 1137 1660 1968 10.8 16.1 19.4 105 103 101
4000 1152 1686 1984 10.8 16.0 19.4 107 105 102
3000 1088 1594 1880 10.9 16.1 19.4 100 99 97
2FSN6-SL1-CP250-L8SCT3 3500 1117 1632 1934 10.8 16.1 19.4 103 101 100
4000 1132 1657 1950 10.8 16.0 19.4 105 104 101
3000 2164 3201 4028 18.3 27.6 36.1 118 116 112
4FSN6-SL1-CA08-L8SCT3 3500 2202 3257 4074 18.3 27.7 36.1 120 118 113
4000 2222 3280 4121 18.2 27.5 35.9 122 119 115
3000 2151 3182 4004 18.3 27.6 36.1 118 115 111
4FSN6-SL1-CA125-L8SCT3 3500 2188 3237 4050 18.3 27.7 36.1 120 117 112
4000 2209 3261 4097 18.2 27.5 35.9 121 119 114
3000 2101 3107 3910 18.3 27.6 36.1 115 113 108
4FSN6-SL1-CP125-L8SCT3 3500 2137 3161 3955 18.3 27.7 36.1 117 114 110
4000 2157 3184 4000 18.2 27.5 35.9 119 116 111
3000 2074 3068 3861 18.3 27.6 36.1 113 111 107
4FSN6-SL1-CP187-L8SCT3 3500 2110 3122 3905 18.3 27.7 36.1 115 113 108
4000 2130 3144 3950 18.2 27.5 35.9 117 114 110
3000 2039 3015 3795 18.3 27.6 36.1 111 109 105
4FSN6-SL1-CP250-L8SCT3 3500 2074 3068 3838 18.3 27.7 36.1 113 111 106
4000 2094 3090 3883 18.2 27.5 35.9 115 112 108
3000 4621 6767 7981 38.6 58.0 77.3 120 117 103
8FSN6-SL1-CA08-L8SCT3 3500 4743 6928 8213 38.6 58.0 77.3 123 120 106
4000 4806 7034 8280 39.0 62.4 78.7 123 113 105
3000 4594 6727 7934 38.6 58.0 77.3 119 116 103
8FSN6-SL1-CA125-L8SCT3 3500 4715 6887 8164 38.6 58.0 77.3 122 119 106
4000 4777 6992 8230 39.0 62.4 78.7 123 112 105
3000 4486 6568 7747 38.6 58.0 77.3 116 113 100
8FSN6-SL1-CP125-L8SCT3 3500 4604 6725 7972 38.6 58.0 77.3 119 116 103
4000 4665 6828 8037 39.0 62.4 78.7 120 109 102
3000 4429 6486 7650 38.6 58.0 77.3 115 112 99
8FSN6-SL1-CP187-L8SCT3 3500 4546 6640 7872 38.6 58.0 77.3 118 115 102
4000 4606 6742 7936 39.0 62.4 78.7 118 108 101
3000 4354 6375 7519 38.6 58.0 77.3 113 110 97
8FSN6-SL1-CP250-L8SCT3 3500 4468 6527 7737 38.6 58.0 77.3 116 113 100
4000 4528 6627 7800 39.0 62.4 78.7 116 106 99

Lumen Maintenance

TM-21 Lumen Theoretical

Ambient Maintenance L70
Fixture Temperature (60,000 hours) (hours)
8FSN6-SL1-CP250-L8SCT3 25ºC 83% 144,000

Cooper Lighting Solutions © 2024 Cooper Lighting Solutions

1121 Highway 74 South All Rights Reserved.
Peachtree City, GA 30269
P: 770-486-4800 Specifications and dimensions PS519391EN page 4
www.cooperlighting.com subject to change without notice. January 4, 2024 8:09 AM