12 11 10 9 8 7 6 5 4 3 2 1

NDA-16 DAVIT
H H
SWL HOISTING: 1650 kg
SWL LOWERING: 1650 kg
+Y HOISTING SPEED: MINIMUM 18 M/MIN
+Y LOWERING SPEED: MINIMUM 18 M/MIN
DESIGN SPEC: 10° TRIM, 20° LIST SIMULTANOUSLY
+X DEAD SHIP LOWERING SPEED: MAXIMUM 60 M/MIN
+Z DAVIT WEIGHT: 1400 kg

WINCH LOWERING

EMERGENCY SWING OUT

G G

R3802
CONTROL UNIT TO BE
PLACED BY YARD ON

1290 C.O.G.
A SUITABLE PLACE
F F

A A B B

156
1935 C.O.G.
8 m OF HOSE PILOT LINES
3118

E E
NOTES:
1. EMBARKATION PLATFORMS, LADDERS ETC.: YARD SUPPLY.

2. LOCATION OF HYDRAULIC POWER UNIT TO BE DECIDED BY YARD.

200

3. NORSAFE DELIVER 4m HOSES FOR CONNECTION BETWEEN DAVIT

130 AND HPU. HYDRAULIC PIPING BETWEEN HPU AND DAVIT IS YARD
SUPPLY.
D D
FORCES IN DECK (POINT LOAD EACH SIDE):
FOR ORIENTATION OF FORCES, SEE LEGEND ON DRAWING 4. CONNECTION OF MAIN POWER SUPPLY TO EL. CABINET IS YARD
SUPPLY.
2535

NDA-16 Davit Reaction Forces in Deck

Force Moment 5. ALL FIELD WELDS TO BE PERFORMED ACC.TO APPROVED WPS.
Nodes
Fx (kN) Fy (kN) Fz (kN) Mx (kNm) My (kNm) Mz (kNm) (YARD RESPONSIBILITY). ALL FIELD WELDING IS SUBJECT TO CLASS
MAX. 36 28 3 3 2 2
F1 / F2 APPROVAL PRIOR TO START WELDING.
TYP.
8 MIN. -11 -3 -6 -4 -1 -6
MAX. 28 27 0 0 0 6
200 F3
MIN. -76 -17 0 0 0 -2 6. FOR WINTERIZATION / ARCTIC AREAS OPERATION STEEL TO BE
C C
250

WITH CHARPY TESTING AT -20 DEGREES. HPU TO BE EQUIPPED

150

WITH OIL SUMP HEATER.

1900 ALL FORCES ARE NOMINAL FORCES WITHOUT ANY SAFETY FACTORS.
ALL FOUNDATIONS SHALL BE DESIGNED WITH A FACTOR OF
SAFETY OF MINIMUM 4,5.
A-A ( 1:25 )
INTERFACE FOOT PRINTS IN DECK
HYDRAULIC POWER UNIT WITH EL. STARTER CABINET

NOTE:
1 Re-issued for approval CENI GACA WAGU 17.06.2019
11

35 180 4m HYDRAULIC HOSES FOR

4-Ø

B 0 Issued for construction GACA ALJI WAGU 18.04.2014 B

WINCH, LEAK OIL AND CYLINDER. REV DESCRIPTION BY CHECK APPRO DATE
166 42

REVISION HISTORY
3+2 HOSES SUPPLIED BY NORSAFE
250
35 180

VIKING Norsafe Life-Saving Equipment Norway AS

P.O Box 115 Tel: +47 37 05 85 00
4852 Færvik Fax: +47 37 05 85 01
NORWAY 24/7 Service: +47 37 05 63 33
Email: [email protected]
166 42 This drawing is the sole property of VIKING Norsafe Life-Saving Equipment Norway AS. It
must not be submitted to other parties nor used in any manner detrimental to our interests.
250 It shall not be copied, reproduced, used for manufacturing or sale without the written
consent of VIKING Norsafe Life-Saving Equipment Norway AS. All rights are reserved.
DWG SIZE: SCALE: COPY OF: PART NO. WEIGHT: SHEET:
A3 1:50 1 /1
B-B ( 1 : 10 ) CLIENT NO: PROJECTION METHOD
NDA-16 Rescue Boat Davit
A
FOOT PRINT TOLERANCES:
ISO 2768-mk, ISO 13920-BF
A
DWG No : REVISION:
1
G-500292 PROJECT:
General Arrangement
12 11 10 9 8 7 6 5 4 3 2 1