Safety Data Sheet

Hempel's Polyenamel 55107 Base

Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II, as amended by Regulation (EU) No. 2020/878 - Europe

SECTION 1: Identification of the substance/mixture and of the company/undertaking

1.1 Product identifier
Product name : Hempel's Polyenamel 55107 Base
Product identity : 5510700010
Product type : polyurethane paint (base for multi-component product)

1.2 Relevant identified uses of the substance or mixture and uses advised against
Field of application : metal industry yacht. buildings, ships and shipyards.
Ready-for-use mixture : 55102 = 55107 4LI / 95304 LI
Identified uses : Consumer applications, Industrial applications, Professional applications, Used by spraying.

1.3 Details of the supplier of the safety data sheet 1.4 Emergency telephone number
Company details : HEMPEL A/S Emergency telephone number (with hours of operation)
Lundtoftegårdsvej 91
DK-2800 Kgs. Lyngby +45 45 93 38 00 (08.00 - 17.00)
Denmark See section 4 First aid measures.
Tel.: + 45 45 93 38 00
[email protected]
Date of issue : 21 November 2022
Date of previous issue : 14 November 2021.

SECTION 2: Hazards identification

2.1 Classification of the substance or mixture

Product definition : Mixture
Classification according to Regulation (EC) No. 1272/2008 [CLP/GHS]
Flam. Liq. 3, H226 FLAMMABLE LIQUIDS
Skin Sens. 1, H317 SKIN SENSITIZATION
STOT SE 3, H335 SPECIFIC TARGET ORGAN TOXICITY (SINGLE EXPOSURE) (Respiratory tract irritation)
STOT SE 3, H336 SPECIFIC TARGET ORGAN TOXICITY (SINGLE EXPOSURE) (Narcotic effects)
Aquatic Chronic 2, H411 AQUATIC HAZARD (LONG-TERM)
See Section 11 for more detailed information on health effects and symptoms.

2.2 Label elements

Hazard pictograms :

Signal word : Warning

Hazard statements : H226 - Flammable liquid and vapor.
H317 - May cause an allergic skin reaction.
H335 - May cause respiratory irritation.
H336 - May cause drowsiness or dizziness.
H411 - Toxic to aquatic life with long lasting effects.
Precautionary statements :
General : Keep out of reach of children. If medical advice is needed, have product container or label at hand.
Prevention : Wear protective gloves. Keep away from heat, hot surfaces, sparks, open flames and other ignition
sources. No smoking. Use only outdoors or in a well-ventilated area. Avoid release to the environment.
Avoid breathing vapor.
Response : Collect spillage. IF INHALED: Call a POISON CENTER or doctor if you feel unwell. Take off
contaminated clothing and wash it before reuse. IF ON SKIN: Wash with plenty of water. If skin
irritation or rash occurs: Get medical advice or attention.
Storage : Store locked up. Store in a well-ventilated place. Keep container tightly closed.
Disposal : Dispose of contents and container in accordance with all local, regional, national and international
regulations.

Version: 0.06 Page: 1/13

Safety Data Sheet
Hempel's Polyenamel 55107 Base

SECTION 2: Hazards identification

Hazardous ingredients : Solvent naphtha (petroleum), light arom.
Reaction mass of bis(1,2,2,6,6-pentamethyl-4-piperidyl) sebacate and methyl 1,2,2,6,6-pentamethyl-
4-piperidyl sebacate
n-butyl acrylate
hydroxypropylmethacrylate
Supplemental label elements : Repeated exposure may cause skin dryness or cracking.
Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe spray or mist.
Special packaging requirements
Containers to be fitted with child- Not applicable.
resistant fastenings :
Tactile warning of danger : Not applicable.

2.3 Other hazards

This mixture does not contain any substances that are assessed to be a PBT or a vPvB.
Other hazards which do not result None known.
in classification :

SECTION 3: Composition/information on ingredients

3.2 Mixtures
Product/ingredient name Identifiers % Regulation (EC) No. 1272/2008 [CLP] Type

titanium dioxide REACH #: 01-2119489379-17 ≥25 - ≤50 Carc. 2, H351 - [1] [*]
EC: 236-675-5 (inhalation)
CAS: 13463-67-7
Index: 022-006-00-2
Solvent naphtha (petroleum), REACH #: 01-2119455851-35 ≥10 - ≤25 Flam. Liq. 3, H226 - [1] [2]
light arom. EC: 265-199-0 STOT SE 3, H335
CAS: 64742-95-6 STOT SE 3, H336
Asp. Tox. 1, H304
Aquatic Chronic 2, H411
EUH066
solvent naphtha (petroleum), REACH #: 01-2119455851-35 ≥5 - ≤10 Flam. Liq. 3, H226 - [1] [2]
light arom. EC: 918-668-5 STOT SE 3, H335
CAS: 64742-95-6 STOT SE 3, H336
Asp. Tox. 1, H304
Aquatic Chronic 2, H411
EUH066
n-butyl acetate REACH #: 01-2119485493-29 ≥3 - ≤5 Flam. Liq. 3, H226 - [1] [2]
EC: 204-658-1 STOT SE 3, H336
CAS: 123-86-4 EUH066
Index: 607-025-00-1
Reaction mass of bis REACH #: 01-2119491304-40 ≤1 Skin Sens. 1A, H317 M [Acute] = 1 [1]
(1,2,2,6,6-pentamethyl- CAS: 1065336-91-5 Repr. 2, H361 M [Chronic] = 1
4-piperidyl) sebacate and Aquatic Acute 1, H400
methyl 1,2,2,6,6-pentamethyl- Aquatic Chronic 1, H410
4-piperidyl sebacate
trimethylolpropane REACH #: 01-2119486799-10 ≤1 Repr. 2, H361fd - [1]
EC: 201-074-9
CAS: 77-99-6
n-butyl acrylate REACH #: 01-2119453155-43 ≤0.3 Flam. Liq. 3, H226 ATE [Inhalation (vapours)] = [1] [2]
EC: 205-480-7 Acute Tox. 4, H332 10.3 mg/l
CAS: 141-32-2 Skin Irrit. 2, H315
Eye Irrit. 2, H319
Skin Sens. 1B, H317
STOT SE 3, H335
Aquatic Chronic 3, H412
hydroxypropylmethacrylate REACH #: 01-2119490226-37 ≤0.3 Eye Irrit. 2, H319 - [1]
EC: 248-666-3 Skin Sens. 1, H317
CAS: 27813-02-1
See Section 16 for the full text of the H statements declared
above.

There are no additional ingredients present which, within the current knowledge of the supplier and in the concentrations applicable, are
classified as hazardous to health or the environment and hence require reporting in this section.
Type
[1] Substance classified with a health or environmental hazard
[2] Substance with a workplace exposure limit, see section 8.
[*] The classification as a carcinogen by inhalation applies only to mixtures placed on the market in powder form containing 1% or more of titanium
dioxide particles with aerodynamic diameter ≤ 10 μm not bound within a matrix.

Version: 0.06 Page: 2/13

Safety Data Sheet
Hempel's Polyenamel 55107 Base

SECTION 3: Composition/information on ingredients

SECTION 4: First aid measures

4.1 Description of first aid measures

General : In all cases of doubt, or when symptoms persist, seek medical attention. Never give anything by mouth
to an unconscious person.
If breathing is irregular, drowsiness, loss of consciousness or cramps: Call 112 and give immediate
treatment (first aid).
Eye contact : Check for and remove any contact lenses. Immediately flush eyes with plenty of water for at least 15
minutes, occasionally lifting the upper and lower eyelids. Seek immediate medical attention.
Inhalation : Remove to fresh air. Keep person warm and at rest. If not breathing, if breathing is irregular or if
respiratory arrest occurs, provide artificial respiration or oxygen by trained personnel. Give nothing by
mouth. If unconscious, place in recovery position and get medical attention immediately.
Skin contact : Remove contaminated clothing and shoes. Wash skin thoroughly with soap and water or use
recognized skin cleanser. Do NOT use solvents or thinners.
Ingestion : If swallowed, seek medical advice immediately and show this container or label. Keep person warm
and at rest. Do not induce vomiting unless directed to do so by medical personnel. Lower the head so
that vomit will not re-enter the mouth and throat.
Protection of first-aiders : No action shall be taken involving any personal risk or without suitable training. If it is suspected that
fumes are still present, the rescuer should wear an appropriate mask or self-contained breathing
apparatus. It may be dangerous to the person providing aid to give mouth-to-mouth resuscitation.
Wash contaminated clothing thoroughly with water before removing it, or wear gloves.

4.2 Most important symptoms and effects, both acute and delayed
Potential acute health effects
Eye contact : No known significant effects or critical hazards.
Inhalation : Can cause central nervous system (CNS) depression. May cause drowsiness or dizziness. May
cause respiratory irritation.
Skin contact : Defatting to the skin. May cause skin dryness and irritation. May cause an allergic skin reaction.
Ingestion : Can cause central nervous system (CNS) depression.
Over-exposure signs/symptoms
Eye contact : No specific data.
Inhalation : Adverse symptoms may include the following:
respiratory tract irritation
coughing
nausea or vomiting
headache
drowsiness/fatigue
dizziness/vertigo
unconsciousness
Skin contact : Adverse symptoms may include the following:
irritation
redness
dryness
cracking
Ingestion : No specific data.

4.3 Indication of any immediate medical attention and special treatment needed
Notes to physician : Treat symptomatically. Contact poison treatment specialist immediately if large quantities have been
ingested or inhaled.
Specific treatments : No specific treatment.

Version: 0.06 Page: 3/13

Safety Data Sheet
Hempel's Polyenamel 55107 Base

SECTION 5: Firefighting measures

5.1 Extinguishing media

Extinguishing media : Recommended: alcohol resistant foam, CO2, powders, water spray.
Not to be used: waterjet.

5.2 Special hazards arising from the substance or mixture

Hazards from the substance or Flammable liquid and vapor. Runoff to sewer may create fire or explosion hazard. In a fire or if heated,
mixture : a pressure increase will occur and the container may burst, with the risk of a subsequent explosion.
This material is toxic to aquatic life with long lasting effects. Fire water contaminated with this material
must be contained and prevented from being discharged to any waterway, sewer or drain.
Hazardous combustion products : Decomposition products may include the following materials: carbon oxides metal oxide/oxides

5.3 Advice for firefighters

Promptly isolate the scene by removing all persons from the vicinity of the incident if there is a fire. No action shall be taken involving any
personal risk or without suitable training. Fire will produce dense black smoke. Exposure to decomposition products may cause a health
hazard. Cool closed containers exposed to fire with water. Do not release runoff from fire to drains or watercourses. Fire-fighters should
wear appropriate protective equipment and self-contained breathing apparatus (SCBA) with a full face-piece operated in positive pressure
mode. Clothing for fire-fighters (including helmets, protective boots and gloves) conforming to European standard EN 469 will provide a
basic level of protection for chemical incidents.

SECTION 6: Accidental release measures

6.1 Personal precautions, protective equipment and emergency procedures

Avoid all direct contact with the spilled material. Exclude sources of ignition and be aware of explosion hazard. Ventilate the area. Avoid
breathing vapor or mist. Refer to protective measures listed in sections 7 and 8. No action shall be taken involving any personal risk or
without suitable training. If the product contaminates lakes, rivers, or sewers, inform the appropriate authorities in accordance with local
regulations.

6.2 Environmental precautions

Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains and sewers. Inform the relevant authorities if the
product has caused environmental pollution (sewers, waterways, soil or air). Water polluting material. May be harmful to the environment if
released in large quantities.

6.3 Methods and materials for containment and cleaning up

Stop leak if without risk. Move containers from spill area. Approach release from upwind. Prevent entry into sewers, water courses,
basements or confined areas. Wash spillages into an effluent treatment plant or proceed as follows. Contain and collect spillage with non-
combustible, absorbent material e.g. sand, earth, vermiculite or diatomaceous earth and place in container for disposal according to local
regulations (see Section 13). Use spark-proof tools and explosion-proof equipment. Contaminated absorbent material may pose the same
hazard as the spilled product.

6.4 Reference to other sections

See Section 1 for emergency contact information.
See Section 8 for information on appropriate personal protective equipment.
See Section 13 for additional waste treatment information.

SECTION 7: Handling and storage

7.1 Precautions for safe handling

Vapors are heavier than air and may spread along floors. Vapors may form explosive mixtures with air. Prevent the creation of flammable or
explosive concentrations of vapors in air and avoid vapor concentrations higher than the occupational exposure limits. In addition, the
product should be used only in areas from which all naked lights and other sources of ignition have been excluded. Electrical equipment
should be protected to the appropriate standard. To dissipate static electricity during transfer, ground drum and connect to receiving
container with bonding strap. No sparking tools should be used.
Avoid inhalation of vapour, dust and spray mist. Avoid contact with skin and eyes. Eating, drinking and smoking should be prohibited in area
where this material is handled, stored and processed. Appropriate personal protective equipment: see Section 8. Always keep in containers
made from the same material as the original one.

7.2 Conditions for safe storage, including any incompatibilities

Store in accordance with local regulations. Store in a cool, well-ventilated area away from incompatible materials and ignition sources.
Keep out of the reach of children. Keep away from: Oxidizing agents, strong alkalis, strong acids. No smoking. Prevent unauthorized
access. Containers that are opened must be carefully resealed and kept upright to prevent leakage.

7.3 Specific end use(s)

Version: 0.06 Page: 4/13

Safety Data Sheet
Hempel's Polyenamel 55107 Base

SECTION 7: Handling and storage

See separate Product Data Sheet for recommendations or industrial sector specific solutions.

SECTION 8: Exposure controls/personal protection

8.1 Control parameters

Product/ingredient name Exposure limit values

Solvent naphtha (petroleum), light arom. EU OEL (Europe).

TWA: 120 mg/m³ 8 hours. Form: Tentativ
TWA: 25 ppm 8 hours. Form: Tentativ
solvent naphtha (petroleum), light arom. EU OEL (Europe).
TWA: 120 mg/m³ 8 hours. Form: Tentativ
TWA: 25 ppm 8 hours. Form: Tentativ
n-butyl acetate EU OEL (Europe, 1/2022).
STEL: 150 ppm 15 minutes.
STEL: 723 mg/m³ 15 minutes.
TWA: 241 mg/m³ 8 hours.
TWA: 50 ppm 8 hours.
n-butyl acrylate EU OEL (Europe, 1/2022).
STEL: 53 mg/m³ 15 minutes.
STEL: 10 ppm 15 minutes.
TWA: 11 mg/m³ 8 hours.
TWA: 2 ppm 8 hours.

Recommended monitoring procedures

If this product contains ingredients with exposure limits, personal, workplace atmosphere or biological monitoring may be required to
determine the effectiveness of the ventilation or other control measures and/or the necessity to use respiratory protective equipment.
Reference should be made to monitoring standards, such as the following: European Standard EN 689 (Workplace atmospheres -
Guidance for the assessment of exposure by inhalation to chemical agents for comparison with limit values and measurement strategy)
European Standard EN 14042 (Workplace atmospheres - Guide for the application and use of procedures for the assessment of exposure
to chemical and biological agents) European Standard EN 482 (Workplace atmospheres - General requirements for the performance of
procedures for the measurement of chemical agents) Reference to national guidance documents for methods for the determination of
hazardous substances will also be required.
Derived effect levels
Product/ingredient name Type Exposure Value Population Effects
Solvent naphtha (petroleum), light arom. DNEL Long term Dermal 25 mg/kg bw/day Workers Systemic
DNEL Long term Inhalation 150 mg/m³ Workers Systemic
solvent naphtha (petroleum), light arom. DNEL Long term Dermal 25 mg/kg bw/day Workers Systemic
DNEL Long term Inhalation 150 mg/m³ Workers Systemic
n-butyl acetate DNEL Long term Inhalation 300 mg/m³ Workers Systemic
DNEL Long term Dermal 11 mg/kg bw/day Workers Systemic
trimethylolpropane DNEL Long term Dermal 0.94 mg/kg bw/day Workers Systemic
DNEL Long term Inhalation 3.3 mg/m³ Workers Systemic
hydroxypropylmethacrylate DNEL Long term Dermal 4.2 mg/kg Workers Systemic
DNEL Long term Inhalation 14.7 mg/m³ Workers Systemic
Predicted effect concentrations
Product/ingredient name Compartment Detail Value Method Detail
n-butyl acetate Fresh water 0.18 mg/l -
Marine 0.018 mg/l -
Fresh water sediment 0.981 mg/kg -
Marine water sediment 0.0981 mg/kg -
Soil 0.0903 mg/kg -
Sewage Treatment Plant 35.6 mg/l -
xylene Fresh water 0.327 mg/l -
Marine water 0.327 mg/l -
Fresh water sediment 12.46 mg/kg -
Marine water sediment 12.46 mg/kg -
Soil 2.31 mg/kg -
Sewage Treatment Plant 6.68 mg/l -
hydroxypropylmethacrylate Fresh water 0.904 mg/l -
Marine water 0.904 mg/l -
Sewage Treatment Plant 10 mg/l -
Fresh water sediment 6.28 mg/kg -
Soil 0.727 mg/kg -
Marine water sediment 6.28 mg/kg -
ethylbenzene Fresh water 0.1 mg/l -
Marine water 0.01 mg/l -
Sewage Treatment Plant 9.6 mg/l -
Fresh water sediment 13.7 mg/kg -

Version: 0.06 Page: 5/13

Safety Data Sheet
Hempel's Polyenamel 55107 Base

SECTION 8: Exposure controls/personal protection

Soil 2.68 mg/kg -
methyl methacrylate Fresh water 0.94 mg/l -
Marine water 0.94 mg/l -
Soil 1.47 mg/kg -
Sewage Treatment Plant 10 mg/l -
Fresh water sediment 5.74 mg/kg -
styrene Fresh water 0.028 mg/l -
Marine water 0.014 mg/l -
Fresh water sediment 0.614 mg/kg -
Marine water sediment 0.307 mg/kg -
Sewage Treatment Plant 5 mg/l -
Soil 0.2 mg/kg -
2-butoxyethanol Fresh water 8.8 mg/l -
Marine water 0.88 mg/l -
Fresh water sediment 34.6 mg/kg -
Marine water sediment 3.46 mg/kg -
Soil 2.8 mg/kg -
Sewage Treatment Plant 463 mg/l -

8.2 Exposure controls

Appropriate engineering controls
Arrange sufficient ventilation by local exhaust ventilation and good general ventilation to keep the airborne concentrations of vapors or dust
lowest possible and below their respective threshold limit value. Ensure that eyewash stations and safety showers are proximal to the work-
station location.
Individual protection measures
General : Gloves must be worn for all work that may result in soiling. Apron/coveralls/protective clothing must be
worn when soiling is so great that regular work clothes do not adequately protect skin against contact
with the product. Safety eyewear should be used when there is a likelihood of exposure.

Hygiene measures : Wash hands, forearms, and face thoroughly after handling compounds and before eating, smoking,
using lavatory, and at the end of day.
Eye/face protection : Safety eyewear complying with an approved standard should be used when a risk assessment
indicates this is necessary to avoid exposure to liquid splashes, mists, gases or dusts. If contact is
possible, the following protection should be worn, unless the assessment indicates a higher degree of
protection: safety glasses with side-shields.
Hand protection : Wear chemical-resistant gloves (tested to EN374) in combination with 'basic' employee training. The
quality of the chemical-resistant protective gloves must be chosen as a function of the specific
workplace concentrations and quantity of hazardous substances.
Since the actual work situation is unknown. Supplier of gloves should be contacted in order to find the
appropriate type. Below listed glove(s) should be regarded as generic advice:

Recommended: Silver Shield / Barrier / 4H gloves, polyvinyl alcohol (PVA), Viton®

May be used: nitrile rubber
Short term exposure: neoprene rubber, butyl rubber, natural rubber (latex), polyvinyl chloride (PVC)

Body protection : Personal protective equipment for the body should be selected based on the task being performed and
the risks involved handling this product.
Wear suitable protective clothing. Always wear protective clothing when spraying.
Respiratory protection : Use a properly fitted, air-purifying or air-fed respirator complying with an approved standard if a risk
assessment indicates this is necessary. Respirator selection must be based on known or anticipated
exposure levels, the hazards of the product and the safe working limits of the selected respirator. If
working areas have insufficient ventilation: When the product is applied by means that will not generate
an aerosol such as, brush or roller wear half or totally covering mask equipped with gas filter of type A,
when grinding use particle filter of type P. Be sure to use an approved/certified respirator or equivalent.
Environmental exposure controls
Emissions from ventilation or work process equipment should be checked to ensure they comply with the requirements of environmental
protection legislation. In some cases, fume scrubbers, filters or engineering modifications to the process equipment will be necessary to
reduce emissions to acceptable levels.

Version: 0.06 Page: 6/13

Safety Data Sheet
Hempel's Polyenamel 55107 Base

SECTION 9: Physical and chemical properties

9.1 Information on basic physical and chemical properties

Physical state : Liquid.
Color : White
Odor : Solvent-like
pH : Testing not relevant or not possible due to nature of the product.
Melting point/freezing point : Testing not relevant or not possible due to nature of the product.
Boiling point/boiling range : Testing not relevant or not possible due to nature of the product.
Flash point : Closed cup: 35°C (95°F)
Evaporation rate : Testing not relevant or not possible due to nature of the product.
Flammability : Flammable in the presence of the following materials or conditions: open flames, sparks and static
discharge, heat and oxidizing materials.
Slightly flammable in the presence of the following materials or conditions: reducing materials.
Lower and upper explosive 0.9 - 7.6 vol %
(flammable) limits :
Vapor pressure : Testing not relevant or not possible due to nature of the product.
Vapor density : Testing not relevant or not possible due to nature of the product.
Specific gravity : 1.266 g/cm³
Partition coefficient (LogKow) : Testing not relevant or not possible due to nature of the product.
Auto-ignition temperature : Lowest known value: 280 - 470°C (536 - 878°F) (Solvent naphtha (petroleum), light arom.).
Decomposition temperature : Testing not relevant or not possible due to nature of the product.
Viscosity : Aspiration hazard (H304) Not classified. Testing not relevant due to nature of the product.
Explosive properties : Slightly explosive in the presence of the following materials or conditions: open flames, sparks and
static discharge.
Oxidizing properties : Testing not relevant or not possible due to nature of the product.

9.2 Other information

Solvent(s) % by weight : Weighted average: 34 %
Water % by weight : Weighted average: 0 %
VOC content : 436.5 g/l
VOC content, Ready-for-use 437.8 g/l
mixture :
TOC Content : Weighted average: 361 g/l
Solvent Gas : Weighted average: 0.092 m³/l

SECTION 10: Stability and reactivity

10.1 Reactivity
No specific test data related to reactivity available for this product or its ingredients.

10.2 Chemical stability

The product is stable.

10.3 Possibility of hazardous reactions

Under normal conditions of storage and use, hazardous reactions will not occur.

10.4 Conditions to avoid

Avoid all possible sources of ignition (spark or flame). Do not pressurize, cut, weld, braze, solder, drill, grind or expose containers to heat
or sources of ignition.

10.5 Incompatible materials

Highly reactive or incompatible with the following materials: oxidizing materials.

10.6 Hazardous decomposition products

When exposed to high temperatures (i.e. in case of fire) harmful decomposition products may be formed:

Version: 0.06 Page: 7/13

Safety Data Sheet
Hempel's Polyenamel 55107 Base

SECTION 10: Stability and reactivity

Decomposition products may include the following materials: carbon oxides metal oxide/oxides

SECTION 11: Toxicological information

11.1 Information on hazard classes as defined in Regulation (EC) No 1272/2008

Exposure to component solvent vapor concentrations may result in adverse health effects such as mucous membrane and respiratory
system irritation and adverse effects on the kidneys, liver and central nervous system. Solvents may cause some of the above effects by
absorption through the skin. Symptoms and signs include headaches, dizziness, fatigue, muscular weakness, drowsiness and, in extreme
cases, loss of consciousness. Repeated or prolonged contact with the preparation may cause removal of natural fat from the skin, resulting
in non-allergic contact dermatitis and absorption through the skin. If splashed in the eyes, the liquid may cause irritation and reversible
damage. Accidental swallowing may cause stomach pain. Chemical lung inflammation may occur if the product is taken into the lungs via
vomiting.
Acute toxicity
Product/ingredient name Result Species Dose Exposure
titanium dioxide LC50 Inhalation Dusts and mists Rat >6.8 mg/l 4 hours
LD50 Dermal Rabbit >5000 mg/kg -
LD50 Oral Rat >5000 mg/kg -
Solvent naphtha (petroleum), light LC50 Inhalation Vapor Rat 6193 mg/m³ 4 hours
arom.
LD50 Dermal Rabbit 3160 mg/kg -
LD50 Oral Rat 3492 mg/kg -
solvent naphtha (petroleum), light LC50 Inhalation Vapor Rat 6193 mg/m³ 4 hours
arom.
LD50 Dermal Rabbit 3160 mg/kg -
LD50 Oral Rat 8400 mg/kg -
n-butyl acetate LC50 Inhalation Vapor Rat >21 mg/l 4 hours
LD50 Dermal Rabbit >14112 mg/kg -
LD50 Oral Rat 10768 mg/kg -
trimethylolpropane LD50 Oral Rat 14100 mg/kg -
n-butyl acrylate LC50 Inhalation Vapor Rat 10.3 mg/l 4 hours
LD50 Dermal Rabbit 2 mL/kg -
LD50 Oral Rat 900 mg/kg -
hydroxypropylmethacrylate LD50 Oral Rat 11200 mg/kg -
Acute toxicity estimates
Product/ingredient name Oral Dermal Inhalation Inhalation Inhalation
mg/kg mg/kg (gases) (vapors) (dusts and
ppm mg/l mists)
mg/l
Solvent naphtha (petroleum), light arom. 3492 3160
solvent naphtha (petroleum), light arom. 8400 3160
n-butyl acetate 10768
trimethylolpropane 14100
n-butyl acrylate 10.3
hydroxypropylmethacrylate 11200
Irritation/Corrosion
Product/ingredient name Result Species Score Exposure
titanium dioxide Skin - Mild irritant Human - 72 hours 300 Micrograms Intermittent
Solvent naphtha (petroleum), light Eyes - Mild irritant Rabbit - 24 hours 100 microliters
arom.
Respiratory - Mild irritant Rabbit - -
Skin - Moderate irritant Rabbit - -
solvent naphtha (petroleum), light Eyes - Mild irritant Rabbit - 24 hours 100 microliters
arom.
n-butyl acetate Eyes - Mild irritant Rabbit - -
Respiratory - Mild irritant Rabbit - -
Skin - Moderate irritant Rabbit - 24 hours 500 milligrams
n-butyl acrylate Eyes - Mild irritant Rabbit - 24 hours 500 milligrams
Skin - Mild irritant Rabbit - 24 hours 10 milligrams
Mutagenic effects
No known significant effects or critical hazards.

Carcinogenicity
No known significant effects or critical hazards.

Reproductive toxicity
No known significant effects or critical hazards.

Version: 0.06 Page: 8/13

Safety Data Sheet
Hempel's Polyenamel 55107 Base

SECTION 11: Toxicological information

Teratogenic effects
No known significant effects or critical hazards.

Specific target organ toxicity (single exposure)

Product/ingredient name Category Route of exposure Target organs
Solvent naphtha (petroleum), light arom. Category 3 Respiratory tract irritation
Category 3 Narcotic effects
n-butyl acetate Category 3 Narcotic effects
1,2,4-trimethylbenzene Category 3 Respiratory tract irritation
Specific target organ toxicity (repeated exposure)
Product/ingredient name Category Route of exposure Target organs
No known data avaliable in our database.

Aspiration hazard
Product/ingredient name Result
Solvent naphtha (petroleum), light arom. ASPIRATION HAZARD - Category 1

Information on the likely routes of exposure

Routes of entry anticipated: Oral, Dermal, Inhalation.
Potential chronic health effects
Sensitization : Contains n-butyl acrylate, hydroxypropylmethacrylate. May produce an allergic reaction.
11.2 Information on other hazards
Endocrine disrupting properties : See Section 15 for details.
Other information : No additional known significant effects or critical hazards.

SECTION 12: Ecological information

12.1 Toxicity
Do not allow to enter drains or watercourses. Toxic to aquatic life with long lasting effects.
Product/ingredient name Result Species Exposure
titanium dioxide Acute LC50 >100 mg/l Daphnia 48 hours
Acute LC50 >100 mg/l Fish 96 hours
Solvent naphtha (petroleum), light Acute EC50 2.6 mg/l Algae - Pseudokirchneriella subcapitata 96 hours
arom. (green algae)
Acute EC50 3.2 mg/l Daphnia 48 hours
Acute LC50 9.22 mg/l Fish - Oncorhynchus mykiss (rainbow 96 hours
trout)
solvent naphtha (petroleum), light Acute EC50 19 mg/l Algae - Pseudokirchneriella subcapitata 96 hours
arom. (green algae)
Acute EC50 6.14 mg/l Daphnia - Daphnia magna 48 hours
Acute LC50 9.22 mg/l Fish - Oncorhynchus mykiss (rainbow 96 hours
trout)
n-butyl acetate Acute EC50 648 mg/l Algae 72 hours
Acute EC50 44 mg/l Daphnia 48 hours
n-butyl acrylate Acute EC50 1.3 mg/l Daphnia 48 hours
Acute LC50 2.1 mg/l Fish 96 hours

12.2 Persistence and degradability

Product/ingredient name Test Result Dose Inoculum
Solvent naphtha (petroleum), light OECD 301F Ready 78 % - Readily - 28 days - -
arom. Biodegradability - Manometric
Respirometry Test
- >70 % - Readily - 28 days - -
- >60 % - Readily - 28 days - -
solvent naphtha (petroleum), light - >70 % - Readily - 28 days - -
arom.
n-butyl acetate - 90 % - Readily - 28 days - -
OECD 301D Ready 80 % - Readily - 5 days - -
Biodegradability - Closed Bottle Test
trimethylolpropane OECD 302B Inherent 100 % - Readily - 28 days - -
Biodegradability: Zahn-Wellens/
EMPA Test

Version: 0.06 Page: 9/13

Safety Data Sheet
Hempel's Polyenamel 55107 Base

SECTION 12: Ecological information

n-butyl acrylate OECD 310 Ready Biodegradability - 80 - 90 % - Readily - 28 days - -
CO₂ in Sealed Vessels (Headspace
Test)

Product/ingredient name Aquatic half-life Photolysis Biodegradability

Solvent naphtha (petroleum), light - - Readily
arom.
solvent naphtha (petroleum), light - - Readily
arom.
n-butyl acetate - - Readily
trimethylolpropane - - Readily
n-butyl acrylate - - Readily

12.3 Bioaccumulative potential

Product/ingredient name LogPow BCF Potential
Solvent naphtha (petroleum), light arom. - 10 - 2500 high
solvent naphtha (petroleum), light arom. - 10 - 2500 high
n-butyl acetate 2.3 3.1 low
trimethylolpropane -0.47 <1 low
n-butyl acrylate 2.38 17.27 low
hydroxypropylmethacrylate 0.97 - low

12.4 Mobility in soil

Soil/water partition coefficient No known data avaliable in our database.
(KOC) :
Mobility : No known data avaliable in our database.

12.5 Results of PBT and vPvB assessment

Product/ingredient name PBT P B T vPvB vP vB
This mixture does not contain any substances that are assessed to be a PBT or a vPvB.

12.6 Endocrine disrupting properties

See Section 15 for details.
12.7 Other adverse effects
No known significant effects or critical hazards.

SECTION 13: Disposal considerations

13.1 Waste treatment methods

The generation of waste should be avoided or minimized wherever possible. Residues of the product is listed as hazardous waste. Dispose
of according to all state and local applicable regulations. Waste should not be disposed of untreated to the sewer unless fully compliant with
the requirements of all authorities with jurisdiction. Spillage, remains, discarded clothes and similar should be discarded in a fireproof
container.
European waste catalogue no. (EWC) is given below.
European waste catalogue (EWC) : 08 01 11*
Packaging
The generation of waste should be avoided or minimized wherever possible. Waste packaging should be recycled. Incineration or landfill
should only be considered when recycling is not feasible.

SECTION 14: Transport information

Transport may take place according to national regulation or ADR for transport by road, RID for transport by train, IMDG for transport by
sea, IATA for transport by air.

Version: 0.06 Page: 10/13

Safety Data Sheet
Hempel's Polyenamel 55107 Base

SECTION 14: Transport information

14.1 14.2 14.3 14.4 14.5

UN / ID no. Proper shipping name Transport hazard class(es) PG* Env* Additional information

ADR/RID UN1263 PAINT 3 III Yes. The environmentally

Class hazardous substance mark
is not required when
transported in sizes of ≤5 L
or ≤5 kg.
Tunnel code (E)
Remarks H-14

IMDG UN1263 PAINT. (Solvent naphtha 3 III Yes. The marine pollutant
Class (petroleum), light arom.) mark is not required
when transported in
sizes of ≤5 L or ≤5 kg.
Emergency schedules
F-E, S-E

IATA UN1263 PAINT 3 III Yes. The environmentally

Class hazardous substance mark
may appear if required by
other transportation
regulations.
PG* : Packing group
Env.* : Environmental hazards

14.6 Special precautions for user

Transport within user’s premises: always transport in closed containers that are upright and secure. Ensure that persons transporting the
product know what to do in the event of an accident or spillage.
14.7 Maritime transport in bulk according to IMO instruments
Not applicable.

SECTION 15: Regulatory information

15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture
EU Regulation (EC) No. 1907/2006 (REACH) Annex XIV - List of substances subject to authorization - Substances of very high concern
Annex XIV
None of the components are listed.
Substances of very high concern
None of the components are listed.
Annex XVII - Restrictions on the manufacture, placing on the market and use of certain dangerous substances, mixtures and articles
Not applicable.
Other EU regulations
Seveso category This product is controlled under the Seveso III Directive.
Seveso category
P5c: Flammable liquids 2 and 3 not falling under P5a or P5b
E2: Hazardous to the aquatic environment - Chronic 2

15.2 Chemical Safety Assessment

Yes.

SECTION 16: Other information

Abbreviations and acronyms : ATE = Acute Toxicity Estimate
CLP = Classification, Labelling and Packaging Regulation [Regulation (EC) No. 1272/2008]
EUH statement = CLP-specific Hazard statement
RRN = REACH Registration Number
DNEL = Derived No Effect Level
PNEC = Predicted No Effect Concentration

Version: 0.06 Page: 11/13

Safety Data Sheet
Hempel's Polyenamel 55107 Base

SECTION 16: Other information

Full text of abbreviated H statements : H226 Flammable liquid and vapor.
H304 May be fatal if swallowed and enters airways.
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H319 Causes serious eye irritation.
H332 Harmful if inhaled.
H335 May cause respiratory irritation.
H336 May cause drowsiness or dizziness.
H351 Suspected of causing cancer.
H361 Suspected of damaging fertility or the unborn child.
H361fd Suspected of damaging fertility. Suspected of damaging the unborn child.
H400 Very toxic to aquatic life.
H410 Very toxic to aquatic life with long lasting effects.
H411 Toxic to aquatic life with long lasting effects.
H412 Harmful to aquatic life with long lasting effects.
EUH066 Repeated exposure may cause skin dryness or cracking.
Full text of classifications [CLP/GHS] : Acute Tox. 4 ACUTE TOXICITY - Category 4
Aquatic Acute 1 AQUATIC HAZARD (ACUTE) - Category 1
Aquatic Chronic 1 AQUATIC HAZARD (LONG-TERM) - Category 1
Aquatic Chronic 2 AQUATIC HAZARD (LONG-TERM) - Category 2
Aquatic Chronic 3 AQUATIC HAZARD (LONG-TERM) - Category 3
Asp. Tox. 1 ASPIRATION HAZARD - Category 1
Carc. 2 CARCINOGENICITY - Category 2
Eye Irrit. 2 SERIOUS EYE DAMAGE/ EYE IRRITATION - Category 2
Flam. Liq. 3 FLAMMABLE LIQUIDS - Category 3
Repr. 2 TOXIC TO REPRODUCTION - Category 2
Skin Irrit. 2 SKIN CORROSION/IRRITATION - Category 2
Skin Sens. 1 SKIN SENSITIZATION - Category 1
Skin Sens. 1A SKIN SENSITIZATION - Category 1A
Skin Sens. 1B SKIN SENSITIZATION - Category 1B
STOT SE 3 SPECIFIC TARGET ORGAN TOXICITY (SINGLE EXPOSURE) - Category 3
Procedure used to derive the classification according to Regulation (EC) No. 1272/2008 [CLP/GHS]

Classification Justification
FLAMMABLE LIQUIDS On basis of test data
SKIN SENSITIZATION Calculation method
SPECIFIC TARGET ORGAN TOXICITY (SINGLE EXPOSURE) (Respiratory tract irritation) Calculation method
SPECIFIC TARGET ORGAN TOXICITY (SINGLE EXPOSURE) (Narcotic effects) Calculation method
AQUATIC HAZARD (LONG-TERM) Calculation method

Notice to reader
Indicates information that has changed from previously issued version.
The information contained in this safety data sheet is based on the present state of knowledge and EU and national legislation. It provides
guidance on health, safety and environmental aspects for handling the product in a safe way and should not be construed as any guarantee
of the technical preformance or suitability for particular applications.
It is always the duty of the user/employer to ascertain that the work is planned and carried out in accordance with the national regulations.

Version: 0.06 Page: 12/13

Safe Use of Mixture Information
Hempel's Polyenamel 55107 Base

This document is intended to communicate the conditions of safe use for the product and should always be read in combination with the
product's Safety Data Sheet and labels.
General description of the process covered
Indoor or outdoor spray painting by professionals or with brush, roller, putty knife, dipping etc. with good general room ventilation
This safe use information is : Professional spray painting and/or low-energy painting, local effect - Level II
linked to Skin Sens. 1, Eye Irrit. 2 , Asp. Tox. 1 or Solvent.
Sector(s) of use : Industrial uses - Professional uses
Product category(ies) : Coatings and paints, thinners, paint removers

Operational conditions
Place of use : Indoor or outdoor use

Risk management measures (RMM)

Contributing Process Maximum Ventilation Respiratory Eye Hands
activity category duration
(ies) Type and air changes per
hour
Preparation of material for PROC05 More than 4 Good general room 3-5 None Use eye protection Wear suitable gloves
application hours ventilation - Outdoors according to EN 166. tested to EN374.

Loading of application PROC08a More than 4 Good general room 3-5 None Use eye protection Wear suitable gloves
equipment and handling hours ventilation - Outdoors according to EN 166. tested to EN374.
of coated parts before
curing

Professional application of PROC10 More than 4 Good general room 3-5 None Use eye protection Wear suitable gloves
coatings by brush or roller hours ventilation - Outdoors according to EN 166. tested to EN374.

Professional application of PROC11 More than 4 Good general room 3-5 Wear a respirator Use eye protection Wear suitable gloves
coatings by spraying hours ventilation - Outdoors conforming to EN140 with according to EN 166. tested to EN374.
an assigned protection
factor of at least 10.

Film formation - force PROC04 More than 4 Good general room 3-5 None None None
drying, stoving and other hours ventilation - Outdoors
technologies

Cleaning PROC05 More than 4 Good general room 3-5 None Use eye protection Wear suitable gloves
hours ventilation - Outdoors according to EN 166. tested to EN374.

Waste management PROC08a More than 4 Good general room 3-5 None Use eye protection Wear suitable gloves
hours ventilation - Outdoors according to EN 166. tested to EN374.
See chapter 8 of this Safety Data Sheet for specifications.

The information in this Safe Use of Mixture Information (SUMI) sheet is based on the data provided by the substance supplier for the substances in the product for which a chemical safety
assessment has been carried out at the time of issue. It does not guarantee safe use of the product and does not replace any occupational risk assessment required by legislation. When developing
workplace instructions for employees, SUMI sheets should always be considered in combination with the Safety Data Sheet (SDS) and the label of the product.
No liability is accepted for any damage, no matter of what kind, which is a direct or indirect consequence of acts and/or decisions based on the contents of this document.
Page: 13/13