421SN & 301SN

No-Skive Hoses

• Nitrile inner tube

– greater fluid compatibility
– bio oil resistance
• Compatible No-Skive Parkrimp fittings
– safe and reliable
421SN/301SN – No-Skive Hoses Parkrimp series fittings and
crimpers
Keeping pace with ever increasing market requirements the Parker‘s 421SN and 301SN hos-
421SN and 301SN have been upgraded with nitrile inner tubes es are compatible with 48 series
for greater fluid compatibility as with as improved ozone and
fittings and the Parkrimp family
abrasion resistant covers.
of crimpers. From the assembly
Although the 1SN and 2SN are often the typically specified hoses speed of the PHastkrimp to the
for standard hydraulic applications, the 421SN and 301SN offer portable ease of the KarryKrimp-
more than just standard performance. The combination of the
ers, there is a Parkrimp machine
hoses technical features with the compatible Parkrimp 48 series
that meets your needs.
fittings offers a safe and reliable assembly that increases service
life and cuts costs. A broad range of fittings, with
over 60 end configurations,
Features: combined with Parker hose and
• Nitrile inner tube for greater fluid compatibility and bio oil resistance crimpers allows simple and safe
• Exceed EN853 1SN/2SN specifications assembly – whenever and wher-
• No-Skive design eliminates the need to remove the cover before
attaching a fitting and crimping. ever needed.
• Compatible No-Skive 48 series Parkrimp fittings – safe and reliable

Primary Applications/Restrictions
General medium pressure hydraulic applications Recommended Fluids
Applicable Specifications Petroleum and water-glycol based fluids, lubricating
oils, air and water. For air above 1,7 MPa, the hose
421SN: EN 853 1SN, ISO 1436 Type 1, SAE100R1AT
cover must be pin-pricked.
301SN: EN 853 2SN, ISO 1436 Type 2, SAE 100 R2 AT
Consult the chemical compatibility section in Catalogue
Hose Construction C4400 on page Ab-16 for more detailed information.
Tube: Nitrile (NBR)
Temperature Range -40 °C up to +100 °C
Reinforcement:
421SN: One high tensile steel wire braid Exception: Air.................................max. +70 °C
301SN: Two high tensile steel wire braids Water...........................max. +85 °C
Cover: Synthetic rubber Fittings Series 48

Pressure rating

max. dynamic min. burst

Part Hose I.D. Hose working pressure pressure min.
Number O.D. bend Weight
radius
DN Inch Size mm mm MPa psi MPa psi mm kg/m
421SN-4 6 1/4 -4 6,3 13,4 22,5 3250 90,0 13000 100 0,24
421SN-5 8 5/16 -5 7,9 15,0 21,5 3125 86,0 12500 115 0,27
421SN-6 10 3/8 -6 9,5 17,4 18,0 2600 72,0 10400 130 0,34
421SN-8 12 1/2 -8 12,7 20,7 16,0 2325 64,0 9300 180 0,43
421SN-10 16 5/8 -10 15,9 23,9 13,0 1875 52,0 7500 200 0,49
421SN-12 20 3/4 -12 19,0 27,8 10,5 1525 42,0 6100 240 0,63
421SN-16 25 1 -16 25,4 35,8 8,8 1275 35,0 5100 300 0,94
421SN-20 32 1.1/4 -20 31,8 44,8 6,3 900 25,0 3600 420 1,19
421SN-24 40 1.1/2 -24 38,1 51,1 5,0 725 20,0 2 900 500 1,49
421SN-32 50 2 -32 50,8 64,7 4,0 575 16,0 2 300 630 2,23

301SN-4 6 1/4 -4 6,3 15,0 40,0 5800 160,0 23200 100 0,39
301SN-5 8 5/16 -5 7,9 16,6 35,0 5075 140,0 20300 115 0,42
301SN-6 10 3/8 -6 9,5 19,0 33,0 4775 132,0 19100 130 0,55
301SN-8 12 1/2 -8 12,7 22,2 27,5 4000 110,0 16000 180 0,67
301SN-10 16 5/8 -10 15,9 25,4 25,0 3600 100,0 14500 200 0,77
301SN-12 20 3/4 -12 19,0 29,3 21,5 3100 86,0 12400 240 1,00
301SN-16 25 1 -16 25,4 38,1 16,5 2400 66,0 9600 300 1,49
301SN-20 32 1-1/4 -20 31,8 47,5 12,5 1800 50,0 7200 420 1,73
301SN-24 40 1-1/2 -24 38,1 55,0 9,0 1300 36,0 5200 500 2,14
301SN-32 50 2 -32 50,8 67,0 8,0 1150 32,0 4600 630 2,96
The combination of high temperature and high pressure could reduce the hose life.

Parker Hannifin GmbH

Hose Products Division Europe
e-mail: [email protected]
www.parker.com/euro_hpd Product Information 4480-P09/UK
© 2004 Parker Hannifin /084
punctum/PlantijnCasparie 03/2006