0% found this document useful (0 votes)
122 views1 page

AlMg 4.5Mn Product-Sheet

This document summarizes an aluminum welding wire called AlMg 4.5Mn. It has high corrosion resistance and is suitable for welding magnesium and manganese alloyed aluminum with up to 5% magnesium. It has excellent weldability, good mechanical strength and corrosion resistance against seawater. It is classified under various welding standards and approved for welding various aluminum alloys. It has typical mechanical properties like 140 MPa yield strength and 300 MPa tensile strength.

Uploaded by

Luca Memoli
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
122 views1 page

AlMg 4.5Mn Product-Sheet

This document summarizes an aluminum welding wire called AlMg 4.5Mn. It has high corrosion resistance and is suitable for welding magnesium and manganese alloyed aluminum with up to 5% magnesium. It has excellent weldability, good mechanical strength and corrosion resistance against seawater. It is classified under various welding standards and approved for welding various aluminum alloys. It has typical mechanical properties like 140 MPa yield strength and 300 MPa tensile strength.

Uploaded by

Luca Memoli
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

AlMg 4.

5Mn
CATEGORY GMAW Solid wires

TYPE Mig aluminium welding wire with high corrosion resistance

APPLICATIONS Filler metal for Magnesium and Manganese alloyed Aluminium with a maximum Magnesium content of 5%. This alloy shows very good mechanical
properties that make it ideal for applications in shipyards, in car and railway industry and constructions of reservoirs and tanks.

PROPERTIES Excellent weldabillity and good mechanical strength combined with good corrosion resistance against seawater are typical for this alloy. The weld
deposit is free from porosity due to the special shaving process and cleaning method during production. AlMg4,5Mn is one of the highest
grades within the range of aluminum alloys and covers a weight range of alloys. Thicker sections should be preheated (150°C) prior to welding.
Qualified by Lloyds for manual and (semi)automatic welding.

CLASSIFICATION AWS A 5.10: ER5183


EN ISO 18273: S Al 5183 (AlMg4,5Mn0,7(A))
F-nr 22

SUITABLE FOR Aluminium alloys: AlMg4,5Mn, AlMg5, AlMg2Mn0,8, AlZnMg1, AlZnMgCu0,5, AlMgSi0,5, AlMgSi1,AlMgSi0,5, G-AlMg10, G-AlMg5, G-AlMg3Si, G-
AlMg5Si, 3.2315, 3.3545, 3.3547, 3.3535, 3.3555, 3.3206, 3.3210, 3.2315, 3.3211, 3.4335, EN AW 5086, EN AW 5083, EN AW 5019, EN AW 5019, EN
AW 6060, EN AW 6005A, EN AW 6082, EN AW 6061, EN AW 7020, EN AC 51300, EN AC 51400,EN AW-6082

APPROVALS CE Lloyds (MATS/NTH-1043/7/1)

WELDING POSITIONS:

TYPICAL CHEMICAL ANALYSIS OF THE FILLER METAL (%)

Mn Cr Mg
0.7 0.1 4.5

ALL WELD MECHANICAL PROPERTIES

Heat RP0,2 Rm A5 Impact Energy (J) ISO-V


Treatment MPa MPa (%) RT
As Welded / 140 300 18 30

WELDING PARAMETERS / PACKING


WELDING PARAMETERS WELDING PARAMETERS WELDING PARAMETERS PACKING PACKING PACKING
D (MM) VOLTAGE (V) CURRENT (A) SPOOL TYPE KG / SPOOL / DRUM KG / PALLET
0.8 14-23 60-160 D-200 / KD-300 / DRUM 2 / 7 / 80 400 / 504 / 320
1.0 15-26 90-210 D-200 / KD-300 / DRUM 2 / 7 / 80 400 / 504 / 320
1.2 20-29 140-260 D-200 / KD-300 / DRUM 2 / 7 / 80 400 / 504 / 320
1.6 25-30 190-350 KD-300 / DRUM 7 / 80 504 / 320

REDRYING TEMPERATURE Not required

GAS ACCORDING EN 14175 I1, I3

CERTILAS - THE FILLER METAL SPECIALIST Page 1 / 1 WWW.CERTILAS.COM/DISCLAIMER

You might also like