Scribd
Upload
106 views1 page

Comprehensive Guide To CNC Machine Cable Diagrams and Pinouts

This document describes four pinout configurations for testing a loopback connection between a PC and CNC machine: 1) No handshake uses pins 2, 3, 5, and 7 with no jumpers 2) Partial handshake uses pins 2, 3, 5, 7, 4, and 5 with RTS/CTS jumpers 3) Full handshake A uses pins 2, 3, 5, 7, 4, 5, 6, 8, and 20 with RTS/CTS and DTR jumpers 4) Full handshake B uses pins 2, 3, 5, 7, 4, 5, 6, 8, and 20 with RTS/CTS, DTR, and DSR jump

Uploaded by

pc100xohm
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
106 views1 page

Comprehensive Guide To CNC Machine Cable Diagrams and Pinouts

This document describes four pinout configurations for testing a loopback connection between a PC and CNC machine: 1) No handshake uses pins 2, 3, 5, and 7 with no jumpers 2) Partial handshake uses pins 2, 3, 5, 7, 4, and 5 with RTS/CTS jumpers 3) Full handshake A uses pins 2, 3, 5, 7, 4, 5, 6, 8, and 20 with RTS/CTS and DTR jumpers 4) Full handshake B uses pins 2, 3, 5, 7, 4, 5, 6, 8, and 20 with RTS/CTS, DTR, and DSR jump

Uploaded by

pc100xohm
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Paperclip Loopback Test

On this page
Search solutions
FactoryWiz DNC Self-Installation Instructions
Add Ticket
Pinout 1: No Handshake Comtrol DeviceMaster IP Configuration Pro…

Pinout 2: Partial Handshake (RTS/CTS Only) MySQL Database Backup and Reload

Pinout 3A: Full Handshake (RTS/CTS & DTR) Troubleshooting - PDF Email Reports not S…

Pinout 3B: Full Handshake (RTS/CTS & DTR/DSR) Custom Services

Optical Isolator Special Pigtail (for Fanuc) Brother C00 FTP Configuration

Isolator Side (DB 25 Male) CNC Side (DB25 Male) Unable to Establish a Connection with the …

Optical Isolator Cable Compatibility Show More

Related Articles

Dynapath 10 (Data Line Option) Configurati…


Pinout 1: No Handshake
Allen Bradley 9 Series Configuration

Milltronics Configuration
Jumper? DB-9 PC (Female) Wire DB-25 CNC Jumper?
(Male)
Siemens 840D Serial Configuration
(Disconnected) Shield 1
2 (Receive Data) Green 2 (Transmit Data) Cincinnati 2100 Configuration
3 (Transmit Data) Red 3 (Receive Data)
5 (Signal Ground) Black 7 (Signal Ground)
4 (RTS) JUMPER
5 (CTS)
6 (DSR) JUMPER
8 (DCD)
20 (DTR)

You might also like