MS-13 series – Compact Linear Potentiometers

Manufactured in UK

 Rugged Construction
 Compact Design
 Sealed to IP67
 Long Life
 Excellent Linearity
 Regulated Output Options

The MS-13 series of linear potentiometers are designed to withstand the harsh environments of motorsport,
testing and industrial applications. Using proven ‘Conductive Plastic’ technology, the sensors offer high
performance and reliability at operational temperatures up to +150°C

The rugged, yet compact 13mm diameter MS-13 is available with stroke lengths up to 200mm, flange mount, a
choice of potentiometer and regulated analogue outputs, sealing up to IP67.

Specifications

Electrical (Potentiometer Output)

Technology Conductive plastic
Max. Supply Voltage 40VDC
Resolution Essentially infinite
Recommended Wiper Current <10µA
Output Signal Potentiometer (voltage divider)
Repeatability ≤0.01mm
Independent Linearity ≤0.5%

Electrical (Regulated Outputs)

Technology Conductive plastic with ‘on board’ signal conditioning
Supply Voltage 6-30VDC (4-20mA, 0-5V output) ; 11-30VDC (0-10V output)
Resolution Essentially infinite
Reverse Polarity Protection Yes
Output Signal 4-20mA ; 0-5VDC ; 0-10VDC regulated output options
Repeatability ≤0.01mm
Independent Linearity ≤0.5%

Mechanical
Operating Temperature -40°C - +150°C (Potentiometer output) ; -30°C - +125°C (4-20mA, 0-5V, 0-10V output)
Stroke lengths 25mm – 200mm

Operational Speed 10m/s max

Electrical & Mechanical Life >25 million operations (depending on installation and environmental conditions)

Housing Material Aluminium

Shaft Material Stainless steel
Sealing IP54 (felt) ; IP65 (2 x Viton O ring) ; IP67 (PTFE U spring, Viton O ring)

Multisense Solutions Ltd, Unit C Old Stratford Business Park, Falcon Drive, Old Stratford, Milton Keynes. MK19 6FG, UK
www.multisense-solutions.com [email protected] Tel: +44 (0)1908 305969
 MS-13 series – Compact Linear Potentiometers
MS-13M-
Electrical Stroke (mm) 25 50 75 100 125 150 175 200

Retracted Mounting Distance (mm) 173 198 223 248 273 298 323 348
(mm)
Min. Mechanical Stroke (mm) 27 52 77 102 127 152 177 202
Body Length (mm) 107 132 157 182 207 232 257 282
222
Approx. Weight Without Cable (g) 53 58 63 68 73 78 83 88
Resistance (KΩ +/-20% 1.7 3.4 5 6.7 8.4 10 11.7 13.4
Mechanical Fixing Standard Rod End Bearings - Ø5mm

MS-13C-
Electrical Stroke (mm) 25 50 75 100 125 150

Retracted Mounting Distance (mm) 142 167 192 217 242 267
(mm)
Min. Mechanical Stroke (mm) 27 52 77 102 127 152
Body Length (mm) 97 122 147 172 197 222
Approx. Weight Without Cable (g) 43 48 53 58 63 68
Resistance (KΩ +/-20%) 1.7 3.4 5 6.7 8.4 10
Mechanical Fixing Compact Rod End Bearings - Ø5mm

Multisense Solutions Ltd, Unit C Old Stratford Business Park, Falcon Drive, Old Stratford, Milton Keynes. MK19 6FG, UK
www.multisense-solutions.com [email protected] Tel: +44 (0)1908 305969
 MS-13 series – Compact Linear Potentiometers
MS-13MP-
Electrical Stroke (mm) 25 50 75 100 125 150 175 200

Retracted Mounting Distance (mm) 153 178 203 228 253 278 303 328
(mm)
Min. Mechanical Stroke (mm) 27 52 77 102 127 152 177 202
Body Length (mm) 107 132 157 182 207 232 257 282
Approx. Weight Without Cable (g) 45 50 55 60 65 70 75 80
Resistance (KΩ +/-20%) 1.7 3.4 5 6.7 8.4 10 11.7 13.4
Mechanical Fixing Pop Joints M4 x 6mm

MS-13CP-
Electrical Stroke (mm) 25 50 75 100 125 150

Retracted Mounting Distance (mm) 140 165 190 215 253 240
(mm)Mechanical Stroke (mm)
Min. 27 52 77 102 127 152
Body Length (mm) 97 122 147 172 197 222
Approx. Weight Without Cable (g) 40 45 50 55 60 65
Resistance (KΩ +/-20%) 1.7 3.4 5 6.7 8.4 10
Mechanical Fixing Pop Joints M4 x 6mm

Multisense Solutions Ltd, Unit C Old Stratford Business Park, Falcon Drive, Old Stratford, Milton Keynes. MK19 6FG, UK
www.multisense-solutions.com [email protected] Tel: +44 (0)1908 305969
 MS-13 series – Compact Linear Potentiometers
Flange Mount
Compatible with MS-13M, 13C, 13MP & 13CP – Refer to model for specifications, except below:

Rod End Bearing (MS-13M, 13C) or Pop Joint (MS-13MP, 13CP) is removed from the rear of the sensor
Retracted Length (mm) = Retracted Mounting Distance -27mm (13M) , -18mm (13C) , -17mm (13MP, 13CP)
Body Length (mm) = +2.5mm to all models

Electrical Connection (Potentiometer output)

Wiring +Ve Supply 0V Supply (GND) Signal

Single Output RED BLACK YELLOW

Dual Output (option) BROWN BLUE WHITE (Green wire = Not Used)
Output Signal Output signal may be reversed by swapping connections to the Red & Black and
Brown & Blue wires. DO NOT connect +Ve supply to the Yellow or White wires, as this will
cause damage to the sensor element.

Electrical Connection (0-5VDC ; 0-10VDC output)

Wiring +Ve Supply 0V Supply (GND) Signal

Single Output RED BLACK YELLOW

Electrical Connection (4-20mA output) 2 wire

Wiring +Ve Supply 0V Supply (GND)

Single Output RED BLACK (Yellow wire = Not Used)

Electrical Cable
Cable Type Raychem 55A, 26AWG, FDR 25 sleeve
Cable Length Approximately 500mm

Multisense Solutions Ltd, Unit C Old Stratford Business Park, Falcon Drive, Old Stratford, Milton Keynes. MK19 6FG, UK
www.multisense-solutions.com [email protected] Tel: +44 (0)1908 305969
 MS-13 series – Compact Linear Potentiometers

Ordering Information
Please use the chart below to construct your product code…

Sample Product Code: MS – 13M – 150 – 67 – F – 000

Series MS - 13

Mounting

M = Standard - Rod End Bearings

C = Compact - Rod End Bearings

MP = Standard - Pop Joints

CP = Compact - Pop Joints

Stroke Length

Insert required length in mm

25 , 50 , 75 , 100 , 125 , 150 , 175* , 200* *13M, 13MP only

Seal Rating

54 = IP54

65 = IP65

67 = IP67

Cable Exit Direction

F = Forward facing cable exit

R = Reverse facing cable exit

Options (compatible options may be selected, separated by – between codes)

000 = No options selected

FL = Flange Mount
Dual = Dual output (6 wire)
SLV = Protective sleeve (refer to accessories below)
420 = 4-20mA regulated output (single output only)
V05 = 0-5VDC regulated output (single output only)
V10 = 0-10VDC regulated output (single output only)
Lxxxx = Cable length in mm (500mm cable supplied as standard)

Accessories

Protective Sleeve SLV For use with all models except Flange Mount

Material Carbon fibre, Peek Ø16mm

Since the suitability of these products depends upon a wide range of factors not in our control, the manufacturer expects and understands that you will conduct
the testing and evaluation necessary to determine that these products are suitable for your application. Whilst every effort is made to ensure the above details
are correct at the time of printing, the manufacturer reserves the right to make material changes, and / or technical changes without notification.

Multisense Solutions Ltd, Unit C Old Stratford Business Park, Falcon Drive, Old Stratford, Milton Keynes. MK19 6FG, UK
www.multisense-solutions.com [email protected] Tel: +44 (0)1908 305969