Your Michelin solutions for

CATERPILLAR
2
CONTENT

TYRE USE 3

Comparison between bias and radial tyres 3

Classification of earthmover Michelin tyres 4

Different earthmover Michelin tyres tread 5

• Tread depths
• Tread compounds
• Tread patterns

EARTHMOVER TYRES FOR QUARRY AND CONSTRUCTION 6 to 13

Tyres for loaders 6 and 7

Tyres for rigid dump trucks

with payload up to 100 tonnes 8 and 9

Tyres for articulated dump trucks 10 and 11

Tyres for graders 12 and 13

PRODUCT LIFE 14
 3
COMPARISON BETWEEN BIAS AND RADIAL TYRES

Bias or cross ply construction

The crown and sidewalls

are formed by the same
ply structure.
The casing is made up The tread is affected by flexing of the sidewalls,
of several resulting in:
criss-crossed plies. The crown • deformation of the tyre contact area
is not on the ground
stabilized. • movement in the tread contact area.
The casing plies tend to “scissor” in relation
to each other

Disadvantages:
• accelerated wear
• less grip
• increased fuel consumption

The MICHELIN® X® radial

The sidewall and tread function separately.
The tread is unaffected by the flexing
of the sidewalls, so there is:
• less deformation of the tyre contact area
on the ground
• less movement in tread contact area
The casing has only
• no movement between casing plies
one radial ply.
The crown
is stabilized
by several
plies.

Advantages:
• long tyre life
• outstanding traction on all types of surface
• lower fuel consumption due to lower rolling resistance
• improved comfort
• increased resistance to punctures / flats
• increased resistance to heating
• protect property and persons
4
CLASSIFICATION OF MICHELIN TYRES

According to their aspect ratio

The wide diversity of earthmover machines and their uses requires the development of numerous ranges of tyres.
Earthmover tyres differ from those mounted on cars or commercial vehicles by:
• Their size and weight
• Their tread depths are proportionally greater
• More reinforcements to deal with the harsher conditions of use
There are several families of earthmover tyres, characterized by their aspect ratio H/S (ratio in % between the height
of the sidewall H and the section width of the tyre S).
H= standard section height - S= standard section width

100 series (standard) 80 series

The H/S ratio is approximately equal to 1. The H/S ratio is approximately equal to 0.80.

H = 100 % H = 80 %
S S

The nominal section width is expressed in inches with The nominal section width is expressed in:
to decimal places. Inches or fractions of an inch
Examples: 18.00 R 33 Examples: 8.25 R 15, 20.5 R 25
Tyres for rigid trucks, handling equipment, etc… or
The aspect ratio is not indicated in the size Examples: 59/80 R 63
designation. Tyres for rigid trucks, articulated dumpers, loaders,
handling equipment, etc…
The aspect ratio is not indicated in the size designation.

65 series 90 series
The H/S ratio is approximately equal to 0.65. The H/S ratio is approximately equal to 0.90.

H = 65 % H = 90 %
S S

The nominal section width is expressed in inches or The nominal section width is expressed in inches
in millimeters, followed by the number 65. followed by the number 90.
Examples: 35/65 R 33, 750/65 R 25 Example: 50/90 R 57
Tyres for large loaders, articulated trucks, etc… Tyres for rigid trucks

Other series of tyres are also available: 95 series, 75 series, etc.

 5
DIFFERENT EARTHMOVER MICHELIN TYRES TREAD

According to their tread depths

The tread depth ‘SUPER, D1, D2’ is sometimes indicated on the sidewall tyre.
D2
D1 D1
N SUPER N
SUPER
D2

External Ø
External Ø

(E2 - E3 - L2 - L3 - (SUPER E3, SUPER L3) (E4 - L4 - G4) (L5)

G2 - G3) Regular tread Deep tread Extra deep tread
Traction / Regular tread Michelin designation: Aggressive ground Abrasive and aggressive
Michelin designation: SUPER Michelin designation: ground
N (Normal) (N < SUPER < D1) D1 = N x 1,5 Michelin designation:
D2 = N x 2,5
Different Michelin earthmover tyre compounds
Type A4:
Particularly resistant to cuts, tread tearing and abrasion on very rough surfaces. minimum TKPH (TMPH)
Type A:
Particularly resistant to cuts, tread tearing and abrasion at average speeds
which are higher than those for A4 (above). low TKPH (TMPH)
Type B4:
Compromise solution between abrasion resistance and average speed on rough surfaces. moderate TKPH (TMPH)
Type B:
Higher resistance to internal heat generation on surfaces which are not particularly rough. average TKPH (TMPH)
Type C4:
Adapted to running on long cycles at high speeds on well-maintained roads. high TKPH (TMPH)
Type C:
Very high resistance to high average speeds on long cycles run on well-maintained roads. very high TKPH (TMPH)

Tread pattern
Code Tread pattern Application
C1 SMOOTH Compactor
E1 RIBBED
E2 TRACTION
E3 ROCK Transport
E4 ROCK (deep tread)
E7 FLOTATION
G1 RIBBED
G2 TRACTION
G3 ROCK Grader
G4 ROCK (deep tread)
G5 ROCK (very-deep tread) In addition, Michelin provides complementary
L2 TRACTION identification to most earthmover tyres:
L3 ROCK
T = Traction, R = Rock, V = speed, F = Flotation,
L4 ROCK (deep tread) Loader
L5 ROCK (very-deep tread) P = Multi purpose, S/R = Smooth/Rock
L3S SMOOTH Bulldozer e.g.: L3T “Normal tread depth tyre (L3; Standardized
L4S SMOOTH (deep tread) identification code) where traction is needed
L5S SMOOTH (very-deep tread) (T; Michelin code)”
6
Tyres for
loaders

E
US
Highway

AL
maintenance XSNOPLUS

ON
SI
Maintenance of parks

CA
& green spaces

OC
R
FO
Rental machine

INE
Building/Public works

CH
XTLA

MA
OSE
PURP
MULTI

Road building
XLD 65 serie
Infrastructure
building sites
(roads, railways, canals,
dams etc.)
XHA2
Logging

Recovery of aggregate
and other materials
SPECI

XLD D1
ALIS
ED M

Extraction
ACH

from quarry
or mine face
INE

XLD D2
Demolition
FO
R
PR

Management of waste
OD

and recycling
UC
TI

Industrial handling
VE
US

XMINE D2
E
 7
Tyre performance
As a result of a close partnership with the machine manufacturers and long experience with the users in the field, MICHELIN
tyres are developed with a single objective: maximising the efficiency of your loader when carrying out everyday tasks.

nd

)
grou

e /h
age

tanc

fe
soft
dam
by increasing

ce l i
(Dis

g (1)
performances

ce to

ervi
on o

savin
ility
stan

gs
ti

Mob
Trac

Fuel
Lon
Resi

XSNOPLUS L2
Snow
Special
Customised offer
For extreme usage requiring a high level
XTLA L2 of protection, it is possible to fit tyres for
underground mining machines to your
loader.
XHA2 L3
Your MICHELIN representative is available
to discuss the best solution with you.
XLD 65 L3

XLD D1 L4

XLD D2 L5

XMINE D2 L5

(1) evaluation based mainly on the inertia of rotating masses

Michelin offer for Caterpillar

Tread patterns
US

D2
ize

OPL

D1

D2

65
INE
s

2
A

Cat Models
XHA
XHA
Tyre

XSN

XLD

XLD

XLD
XTL

XM

924H 17.5 R 25 | | | | |
924K, 930K, 930H 17.5 R 25 | | | | |
20.5 R 25 | | | | |
938K / 938H 20.5 R 25 | | | | |
950H 23.5 R 25 | | | |
950K, 962K 23.5 R 25 RT RT | | RT
962H 23.5 R 25 | | | | |
966K / 966H, 972K / 972H 26.5 R 25 | | | |
980H 29.5 R 25 | RT | |
980K 29.5 R 25 | | | |
875/65 R 29 RT
988K / 988H 35/65 R 33 | | |
990H 45/65 R 39 | RT
992K 45/65 R 45 | | |
65 series

924K, 930K, 938K, 938H 550/65 R 25 |

924K, 930K, 938K 600/65 R 25 RT
924K, 930K, 938K, 938H, 950H,
650/65 R 25 |
962H
950K, 950H, 962K, 966K, 966H,
750/65 R 25 | (1)
972K, 972H
(BOLD): current models Michelin tyres are not approved on block handling machines
RT: Replacement only
(1): Replacement only: 950K, 962K
8
Tyres for
rigid dump trucks with payload
up to 100 tonnes

S
ON
ITI
Rental machine

ND
D CO
UN
RO
SG
IOU
VAR
Public works
K, ON
TRUC
UMP
OSE D

XHD1
MULTIPURP

Infrastructure
building sites (roads,
railways, canals, XDT B
dams etc.)
DUMP
TRUC

Road building
X-TRACTION
K IN
CON
TIN
U

X-QUARRY (S)
OU
SU

Use in quarries
or mines
SE
NO
ON
E

XDR2
SI
ET
 9

Tyre performance
MICHELIN tyres aim to achieve a lifespan and an unrivalled resistance to damage in any given condition. They also contribute
to reducing the downtime of your machines and increase the productivity of your tasks.

nd
grou
age

fe

city
dam

soft
by increasing

ce l i

g (1)
performances

apa
ce to

n
ervi

on o

ed c

savin
H)
stan

gs

ti

( TKP
Spe
Trac
Lon

Fuel
Resi

XHD1
Customised offer
In order to meet to your specific needs,
XDT B your MICHELIN representative can advise
you on the following tyres:
• XVC (18.00 R 33, 24.00 R 35
X-TRACTION and 27.00 R 49)
for very high speeds, ideal for long cycles
X-QUARRY (S)
on developed slopes.
• XDT A4 version for quarries or mines
of very sharp materials such as slate
XDR2 or diorite requiring an increased level
of traction on soft ground.
(1) evaluation based mainly on the inertia of rotating masses • XS (18.00 R 25 and 21.00 R 25)
for effective mobility on sand.
These products are available on special
order following an analysis
In order to adapt the TKPH of the tyre to that of your building site, various of your building site by your MICHELIN
types of rubber are available in the dimensions 24.00 R 49 and 27.00 R 49. representative.
Consult your MICHELIN representative to discuss the available solution.

Michelin offer for Caterpillar

Tread patterns
Y (S)
N

(S)
IO
ize

ACT

ARR
AUL

2B
B
s

Cat Models
X-QU
X-TR

XDT

XDR
Tyre

X-H

770G / 770 18.00 R 33 | | (3) | |

772G / 772 21.00 R 33 | |

773G / 773F 24.00 R 35 | (1) | (4) |

775G / 775F 24.00 R 35 | (1) | (4) |

777G / 777F 27.00 R 49 | (2) | (3) | (5)

(BOLD): current models (1) X-TRACTION SC

(2) X-TRACTION (S) B and X-TRACTION B as OE default choices.
X-TRACTION B4 or A4 available for RT specific need expressed by End Users
(3) XDT B as OE default choice. XDT A4 available for RT specific need expressed by End Users
(4) XDT B as OE default choice. XDT A and XDT A4 available for RT specific need expressed by End Users
(5) XDR2 B as OE default choice. XDR2 B4 and XDR2 A available for RT specific need expressed by End Users
10
Tyres for
articulated dump trucks

S
TE
SI
G
IN
LD
UI
EB
BIL
MO
ON
USE
Rental machine OSE
XADN / XADN +
PURP
MULTI

Public works

Infrastructure building XAD 65

sites (roads, railways,
canals, dams etc.)

Road building
INTEN
SIVE

X-SUPER TERRAIN /
Use in quarries or mines X-SUPER TERRAIN +
USE
ON
LO
NG
-TE
RM
BU
ILD
IN
G
SI
TE
 11

Tyre performance

nd
grou

age

fe
dam
soft

city
by increasing

ce l i

g (1)
performances

ce to

apa
n

ervi
on o

tion

savin
ed c
stan

gs
ti

a
Trac

Flot

Fuel
Resi

Spe
Lon
XADN / XADN +
Customised offer
In order to meet to your specific needs,
your MICHELIN representative can advise
XAD 65 you on the following tyres:
• 29.5 R 25 XADN E3V TL 200E:
ideal for high speeds and long cycles.
X-SUPER TERRAIN / • 29.5 R 25 XS E7 SAND TL 196E:
X-SUPER TERRAIN + specifically for mobility on sand.
These products are available on special
(1) evaluation based mainly on the inertia of rotating masses. order following an analysis
of your building site by your MICHELIN
representative.

XADN E3V XS SAND

Michelin offer for Caterpillar

Tread patterns
N+
N
ize

TER R
TER ER

N+

65
UPE
RAI
RAI
UP

N
s

Cat Models
XAD
XAD
XAD
Tyre

X-S
X-S

725 23.5 R 25 | |

650/65 R 25 |

750/65 R 25 |

730 23.5 R 25 | |

750/65 R 25 |

730 Ejector 750/65 R 25 |

735 26.5 R 25 | |

735 B 26.5 R 25 | (D) | (D)

740B / 740 29.5 R 25 | |

740B Ejector 29.5 R 25 | |

(BOLD): current models (D) Derogation

12
Tyres for
graders

E
US
AL
ON
AS
Snow clearance

SE
OR
XSNOPLUS

D
ITE
Highway maintenance
LIM

XTLA
Public works

Rental machine

XGLA2

Road building

XHA2
Transport infrastructure
building sites (roads,
railways, canals, dams etc.)

XLD 65 serie
FR
EQ

Maintenance of quarry or
UE

mine slopes
NT

XLD D2
US
E
 13

Tyre performance
MICHELIN tyres are designed to ensure availability of your machine and reduce costs of usage.

erfo hocks,
ns
ratio

fe
s
by increasing

ce l i
brea ance to

g (1)
performances

ervi
ks, p

savin
on

gs
st
ti

Resi

Fuel
Trac

Lon
XSNOPLUS
Snow
Special
Customised offer
For extreme usage requiring a high level
of protection, it is possible to fit tyres
XGLA2, XTLA
for underground mining machines
to your grader.
XLD 65 Your MICHELIN representative is available
to discuss the best solution with you.

XHA2

XLD D2

(1) evaluation based mainly on the inertia of rotating masses.

Michelin offer for Caterpillar

Tread patterns
US
ize

OPL

D2
A2

65
s

2
A

Cat Models
XSN

XHA
XHA
XGL

XLD
Tyre

XLD
XTL

120M3, 140M3, 160M3, 12M3 14.00 R 24 | |

17.5 R 25 | | |

550/65 R 25 |

120M, 140M, 12M 14.00 R 24 | |

15.5 R 25 | |

17.5 R 25 | | |

160M 14.00 R 24 | |

17.5 R 25 | | |

14M3 16.00 R 24 |

20.5 R 25 | | | |

14N 16.00 R 24 |

20.5 R 25 | | | |

16M 23.5 R 25 | | | |

24M 29.5 R 29 | (D)

(BOLD): current models (D) Derogation

14
PRODUCT LIFE

Tyres are made from different types of materials and rubber-based components, whose properties are essential
to the proper running of the tyre itself.
These properties evolve over time.
For each tyre, this evolution depends on many factors, such as climate, storage conditions (temperature, humidity,
position, etc.), conditions of use (load, speed, inflation pressure, road damage, etc.) to which the tyre is subjected during
its working life.

These ageing factors vary so much that it is impossible to predict the life of a tyre with any accuracy. This is why, in
addition to regular user checks, it is recommended to have the tyres regularly checked by a qualified professional, who
will determine whether the tyre is fit to continue in operation.
This inspection must be carried out at least once a year.

Michelin may in no way be held responsible for damage that may occur as a result of use contrary to its instructions.

The preceding information is extracted from the

Use and Maintenance Guide for Michelin Earthmover Tyres.
Michelin advice
Our recommended conditions of storage, tyre selection, mounting, inflation, pressure, tyre use and its limits, tyre
monitoring, repairs or similar interventions, and tyre maintenance, as stipulated by Michelin, must be followed and
respected by our clients who in turn are held to inform the end users.
“Our clients should train their employees who are involved in placing our products with the end users and prohibit all
repairs (tyre punctures, rim welding) without first demounting the tyre. If in doubt, we invite you to consult our technical
documentation or one of our technicians, or, ultimately, our web site at www.michelinearthmover.com”

The following information

is extracted from the
Use and Maintenance
Guide for Michelin
Earthmover Tyres
available at
www.michelinearthmover.com
or consult your Michelin
representative
 15
NOTES

credit : iStockphoto
Clermont-Fd - Photos
ELIN - RCS 855 200 507
R.C.S. 352 321 285 - MICH
Cat Models Tread patterns
Tyre size X-CRANE / X-CRANE +
XSNOPLUS XMH S XLB
XGC

769D 18.00 R 33 | | | |
771D 18.00 R 33 | | | |
773E 24.00 R 35 | | |
775E 24.00 R 35 | | |
777D 27.00 R H
MIC 49ELINEA|RTHMOVER |
NG TYRES
R 51MATERIAL HANDLI |
785D AND
33.00
 Contact
CATERPILLAR
www.cat.com

Europe North America Africa/India/ China

Manufacture Française Michelin North America, Inc. Middle East MICHELIN (China) Investment
des Pneumatiques Michelin One Parkway South Co. Ltd.
Michelin AIM FZE
23, place des Carmes-Déchaux PO Box 19001 Dawning Center
JAFZA LOB 14, 5th floor
63040 Clermont-Ferrand Cdx 09 Greenville, SC 29602 Tower B (East Tower, 16th floor)
P.O.Box 263034
France USA 500 Hongbaoshi Road
Jebel Ali Free Zone
Tel: + 33 4 73 32 20 00 Tel: + 1 864 458 5000 Shanghaï 201103
Dubai, UAE
P.R. China
Tel: + 971 4 8078111
Tel: + 86 (21) 22 19 08 88

Eastern Europe South America South East Asia/ Korea / Japan

MICHELIN - MOSCOW Sociedad Michelin New Zealand/ MICHELIN (China) Investment
Smolnaya street de Participaçoes Co. Ltd.
24D (2sd floor) Industrial e Commercial Ltda Australia Dawning Center
125445 Moscow Avenida das Americas - Bloco 4 MICHELIN Australia Pty Ltd Tower B (East Tower, 16th floor)
Russia Barra Da Tijuca 51-57 Fennell Street 500 Hongbaoshi Road
Tel: +7 495 258 09 26 Río de Janeiro (RJ) Port Melbourne Shanghaï 201103
CEP 22640-100 (Victoria 3207) P.R. China
Brasil Australia Tel: + 86 (21) 22 19 08 88
Tel: +61 3 8671 1000

855 200 507 RCS Clermont-Ferrand - EFCM 7212-Eng (2014-12) - Réf n° 0509687
Tel: + 55 (21) 36 21 46 46

Europe
North Eastern Europe
America

China
Korea / Japan
Africa/
India/
Middle East

South
America South East Asia /
New Zealand /
Australia
F29284 - Tél. 04 73 73 25 25
(63190 Lezoux - France)

For more information about our products, maintenance

and safety advice, or to fi nd your nearest dealer, visit

ww w.mic h e lin e a rth mo v e r. c o m